Import collides with another import statement

Suppose I have 2 packages, train and plane. Each package has a class called Engine. In addition, train.Engine and plane.Engine have nothing in common. In a 3rd class, I import both of these:
import train.Engine;
import plane.Engine;Doing so results in the following error:
The import plane.Engine collides with another import statement
How do I do this?

One of these imports have to be commented. The imports are reside in the source code, not just in jar or other class path entries. If the imports are in different files then you'd browse the sources and find import with the same name but in different name spaces. This is happened if you you don't wanna add a big jar to the class path instead you created a class file with the same name because of huge references. And you just wanted route it out of the jar and possibly remove dependency.

Similar Messages

The import collides with another import statement

What is this? Why this happens? I've just imported a class name to the JSP that has much more level imports. This JSP isn't even validated. I don't wanna rename my class has the same name as in one of the jar files on the class path.

nromanc wrote:
Skipping imports is not possible."skipping" as in not having any. Not possible? Why?
More naturally fully qualified names could be used in the rarely used practices.
much more typing and increase in the file size happens.The size of your source file might increase, yes.
Wild-cards also lead to not optimized imports hence bad performance.Imports are a compile-time only construct. Any performance impact import wildcards might have are limited to compile-time.
I didn't find correct answer in an old thread.
I've posted correct answer but a moderator is blocked it.The reason for blocking it is given as "your post as it doesn't make much sense, and detracts from the good advice already given and well received."
I do not know what you wrote. I cannot see blocked posts. I have no reason to doubt the reason given.

Problem Import WSDL with XSD import Schema

Hi SCN, i have problem
I have a WSDL that references an xsd, but the structure is not visible in PI.
   <wsdl:types>
      <xsd:schema targetNamespace="http://tempuri.org/Imports">
         <xsd:import schemaLocation="http://bilbolab****.net/ServiceItemHO.svc?xsd=xsd0" namespace="http://tempuri.org/" />
         <xsd:import schemaLocation="http://bilbolab.****.net/ServiceItemHO.svc?xsd=xsd1" namespace="http://schemas.microsoft.com/2003/10/Serialization/" />
         <xsd:import schemaLocation="http://bilbolab.*****.net/ServiceItemHO.svc?xsd=xsd2" namespace="http://schemas.datacontract.org/2004/07/ItemHO.BO" />
      </xsd:schema>
   </wsdl:types>
   <wsdl:message name="iVistaHO_AddItemHO_InputMessage">
      <wsdl:part name="parameters" element="tns:AddItemHO" />
   </wsdl:message>
WSDL works well using SoapUI.
When imported to PI parameters is not displayed
I Need Help
Thank you.

Hi, Dihiansan. I don't understand your proposal
I need you see the structure in PI how in SoapUI.
It is possible?
Regards

Import command error while importing in oracle 8i database.

Hi,
Trying to import a schema using imp utility in oracle 8i using sucessfully exported dump file in oracle 11g. But getting below errors.
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
Please provide any solution for this above error so that i can import a schema in Oracle 8i database.
Thanks.

dump file created in 11g database can't be imported in lower 8i version.
Restrictions When Using Different Releases of Export and Import
The following restrictions apply when you are using different releases of Export and Import:
Export dump files can be read only by the Import utility because they are stored in a special binary format.
Any export dump file can be imported into a later release of the Oracle database.
The Import utility cannot read export dump files created by the Export utility of a later maintenance release. For example, a release 9.2 export dump file cannot be imported by a release 9.0.1 Import utility.
Whenever a lower version of the Export utility runs with a later release of the Oracle database, categories of database objects that did not exist in the earlier release are excluded from the export.
Export files generated by Oracle9i Export, either direct path or conventional path, are incompatible with earlier releases of Import and can be imported only with Oracle9i Import. When backward compatibility is an issue, use the earlier release or version of the Export utility against the Oracle9i database.
Thanks
Kuljeet Pal Singh
Edited by: Kuljeet Pal Singh on Mar 19, 2012 7:43 PM

PC hard drive died and I have replaced it. Need to import the music on my iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto new hard drive? Senuti's just for macs.No old hard drive to copy.

My PC hard drive died and I have replaced it. Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)

See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock

How do I rename the iphoto library on one computer before importing it to another location with other iphoto libraries?

How do I rename the iphoto library on one computer before importing it to another location with other iphoto libraries?

How do I rename the iphoto library on one computer before importing it to another location with other iphoto libraries?
Quit iPhoto.
Select the Library in the Finder, click the name, and edit the name like for any file.

I burned a playlist to a data CD using itunes 11 but what is best way to get it import it into another computer with itunes running?

I burned a playlist to a data CD using itunes 11 but what is best way to get it import it into another computer with itunes running? I get an "X" when trying to copy to the "automatically add to itunes" folder on the 2nd computer.

ok... so i i just made sure all my music is all together in 1 folder and i am going to trash my old music folder that is in the itunes folder... and follow your directions - let itunes start w/new library and bring my music in. Well, last little hurdle/question. I noticed that the place where my itunes library is - on an external drive doesnt have much space left on it. The place where i gathered all my music together in order to start fresh - is a different external drive and has LOTS of free space on it.
SO... i now would like to just keep all that freshly compiled clean music right where it is but in advanced preferences I want to point to that new folder on the drive that has so much more space. So... should i delete the old music then go into itunes with a blank library and change the folder in preferences - quit and go back in and then follow your steps to loading my music? If i change the setting of where itunes looks for the music - that doesn't wipe out the old stuff... it just mixes it all up together right? I dont want that!!
i promise this is the last question - i would love to fix this problem tonight and just be DONE!
Thanks in advance for your patience and knowledge!!
Lisa

How to import a image and compare with another image to find their deviation

i am new to labview , can anyone tell how to import a image and compare it with another image to find their deviation
Solved!
Go to Solution.

This is an quite easy task using the Vision Development Module.
There you can acquire images from cameras or read them form the harddrive, then differntiate them or since VDM 2010 calculate the optical flow between consecutive images.
Christian

When i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this potion. Please give me some solution.

when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.

Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else.

Trouble with keyword import in LR5 from one catalog to another

Hi; I am trying to open a new catalog because my original catalog is getting somewhat sluggish. It has about 60000 images. First, will opening a new catalog improve anything? Second, I have tried to import the prior catalog "keywords" by going: metadata, import keywords, light room settings, key word sets and get "no items match your search. What am I doing wrong?

I have had this Nikon 7100 for about 6 months. It has more whistles and bells than I am likely to use. I haven't been troubled by 24 megs in LR I guess because I use it mostly for filing and Photoshop for editing. I only edit a few. If I were in need of batch editing, which I may in the future, I think LR would be better.
As to the timing, don't we all get spoiled. We have more computer power now than NASA had 15 years ago. It makes you wonder how the original Apple 2+ with 48k memory even functioned.
From: Modesto Vega <[email protected]>
To: ROBERT CHIAVARINI <[email protected]>
Sent: Tuesday, January 6, 2015 8:31 AM
Subject: trouble with keyword import in LR5 from one catalog to another
trouble with keyword import in LR5 from one catalog to another
created by Modesto Vega in Photoshop Lightroom - View the full discussion
rlchiv wrote: I just looked at the metadata in LR and the size is 24 Megapixels which matches the camera and makes sense. Photoshop must do something in terms of formatting the kicks the size up because these are untouched. As to cabling, I"m using a USB3 and yes, I am shooting raw. Thanks again for all your help.
It doesn't sound unreasonable, it is the size of my current camera and I do have to wait for imports to complete but never timed them. Is this a new camera? The reason for the question is that megapixels matter a lot for Lightroom, it is something I haven't gotten used to yet. There are certain Develop adjustments Lightroom struggles with on a 24 megapixel file (cropping, and the Upright and Manual lens corrections, for example). In other words, there are things that Lightroom does on a 6, 12, 14 megapixel file with ease and cannot do with ease on a 24 megapixel file. Memory does not seem to matter, I recently upgraded my laptop and the performance improvement is marginal. You can almost hear the cogwheels moving sometimes. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7070168#7070168 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7070168#7070168 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Import tags from another catalogue without develop settings

How do I import tags from another catalogue but not the develop settings of each image?
Here's whats going on:
I started with 5000 images on a hard drive. I gave a copy to someone else working on the project.
I physically moved images into real folders and edited all the shots.
She left all the images where they originally were and tagged each image.
I want to combine her tags with the edits that I've done, with the images in their new locations I've made.
I have a copy of her catalogue file.
I tried importing her catalogue into mine- which will pull her metadata tags, but only also with pulling her develop settings which resets all my work.
How can I import ONLY her metadata tags?
I can't open her catalogue and write the tags into XML sidecars because I've moved the images from where her catalogue says they are.
I realize we should have done this differently from the beginning, but with that being said- if I could import only her metadata tags then that should work. But Lightroom 4 only gives the options of importing BOTH metadata and develop settings.
Any ideas?

One option (backup your catalog first):
* Import her catalog (apply metadata and develop changes), which adds a "Paste Settings" step to the edit history.
* Restore previous develop settings using ScrewAutoSync, to roll back the settings by one step, to pre-"Paste Settings" state. - just make sure you *don't* do this to photos that weren't changed by the catalog import. One way to do that is to apply a no-op (do nothing) preset to all photos before importing the catalog (that way if you inadvertently roll 'em back one, they'll be the same as they were). You must create a no-op preset by hand, or use this:
http://www.robcole.com/LrForumSupport/Clear Edit History.lrtemplate
(hint: context-click & select "save link as")
There are probably other options.
Rob

Problem with Export/Import in background

Hi Experts,
I am having a requirement in which i am exporting an flag to memory from one program and importing that in another program. in foreground it is working fine. But in background it is not working. Is there any work around.
Report 1:
DATA:l_flag type c value 'X'.
free memory id 'ZFLAG'.
EXPORT L_FLAG TO MEMORY ID 'ZFLAG'.
LEAVE PROGRAM.
Report 2:
DATA:L_FLAG TYPE C.
import l_FLAG from memory id 'ZFLAG'.
free memory id 'ZFLAG'.
IF l_FLAG = 'X'.
LEAVE PROGRAM.

Hi,
You can export the flag to database ..it is not required to be a internal tabel. You can refer to this link..
It is explained with example
http://help.sap.com/saphelp_45b/helpdata/en/34/8e73a36df74873e10000009b38f9b8/content.htm
Here obj1 can be single variable..
EXPORT obj1 ... objn TO DATABASE dbtab(ar) ID key
This will work in Background not the Export to MEMORY statement.

Imported RFC with problem in converting to XML

Hello,
another nice issue:
I have an aRFC with this import parameter from ABAP:
data: p_data type tab512 occurs 0.
Call function.......
Tables
DATA = p_data
This is the XML source from the mapping test in Int.Rep.
<?xml version="1.0" encoding="UTF-8"?>
<ns:Z_BI_SEND_DATA_512 xmlns:ns="urn:sap-com:document:sap:rfc:functions">
<SYSID_HOME>AAA</SYSID_HOME>
<TARGETSYS>BBB</TARGETSYS>
<DATA>
    <item>test1</item>
    <item>test2</item>
    <item>test3</item>
</DATA>
</ns:Z_BI_SEND_DATA_512>
This is the payload from SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:Z_BI_SEND_DATA_512 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<SYSID_HOME>AAA</SYSID_HOME>
<TARGETSYS>BBB</TARGETSYS>
- <DATA>
- <item>
<WA>test1</WA>
</item>
- <item>
<WA>test2</WA>
</item>
- <item>
<WA>test3</WA>
</item>
</DATA>
</rfc:Z_BI_SEND_DATA_512>
Looks like there is a difference (imported RFC in mapping does not show the work area WA)(so: mapping requires
<DATA>
    <item>test1</item>
but RFC generates
- <DATA>
- <item>
<WA>test1</WA>
which hinders the mapping from moving the item lines into the destination file because in mapping the WA area cannot be linked as it is not recognized in mapping.
Any ideas are welcome!
Regards
Dirk

Hi everyone
My problem is related to Dirk's one in that I am using an RFC to send XML data from CRM to XI.
I am trying to send the following string:
<TEST>GREG</TEST>
However on XI the payload looks like this:
<xml version="1.0" encoding="UTF-8"?>
<rfc:_-MARS_-CPE_IMPORT_CRM_CATALOG xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<IV_CATALOG><TEST>GREG</TEST></IV_CATALOG></rfc:_-MARS_-CPE_IMPORT_CRM_CATALOG>
As you can see < is converted into <
Where and how do I specify that the content of the parameter must not be interpreted?
Thanks
Greg

Help! How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?

I am a new Indesign user and I have been working with GIMP for the last year creating single colour print-ready PDFs. But now I need to create a document with a FOGRA27 CMYK colour profile and a resolution of at least
How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?
I can import the PDF by creating a new document and finding the PDF in places, but it's bad quality.
The only colour profile I can find under View - Proof Setup is FOGRA39, but I need FOGRA27!
Help help help, I need to get these files printed in two days!
Thanks so much..
xx

Proof Colors doesn't change the file's color management, it just lets you see what the color values would look like if they are printed unchanged on different output devices. If you want to actually convert the color from one CMYK space to another, it's probably better to do that in Acrobat—Tools>Print Production>Convert Colors.
There's very little difference between Fogra27 and Fogra39—Fogra27 allows more total ink 350 vs. 330.
There's nothing you can do to improve the quality of low res images

Problem with export/import in back ground

Hi Experts,
I am having a requirement in which i am exporting an internal table to memory from one program and importing that in another program. in foreground it is working fine. But in background it is not working. Is there any work around.
Here is sample code.
Program1:
types:
begin of tab_type,
    para type string,
    dobj type string,
end of tab_type.
data:
id    type c length 10 value 'TEXTS',
text1 type string value `IKE`,
text2 type string value `TINA`,
line type tab_type,
itab type standard table of tab_type,
    itab1 type standard table of tab_type.
line-para = 'P1'.
line-dobj = 'TEXT1'.
append line to itab.
line-para = 'P2'.
line-dobj = 'TEXT2'.
append line to itab.
free memory id 'TD'.
export itab to memory id 'TD'.
Program2:
types:
begin of tab_type,
    para type string,
    dobj type string,
end of tab_type.
data:
id    type c length 10 value 'TEXTS',
text1 type string value `IKE`,
text2 type string value `TINA`,
line type tab_type,
itab type standard table of tab_type,
    itab1 type standard table of tab_type.
refresh itab.
import itab from memory id 'TD'.
free memory id 'TD'.
clear line.
loop at itab into line.
write: / line-para, line-dobj.
clear line.
endloop.
Thanks,
Jyothi

Thanks for your links Venkat.
My problem is solved by using the SHARED BUFFER.
Here is the code i used inthe first program
        DATA: wa_invdata(10) TYPE c VALUE 'INVDATA'.
        DATA: wa_month(10) TYPE c VALUE 'MONTH'.
        DATA: wa_process(10) TYPE c VALUE 'PROCESS'.
        EXPORT wa_month_end TO MEMORY ID 'MONTHEND'.
        EXPORT e_process = it_inv_data[]
        TO SHARED BUFFER indx(st) ID wa_process.
        EXPORT e_month = wa_month_end
        TO SHARED BUFFER indx(st) ID wa_month.
        EXPORT e_invdata = it_tab[]
            TO SHARED BUFFER indx(st) ID wa_invdata.
     EXPORT it_inv_data TO MEMORY ID 'PROCESS'.
        DATA: number           TYPE tbtcjob-jobcount,
              name             TYPE tbtcjob-jobname VALUE 'CRDR_ ',
              print_parameters TYPE pri_params.
        CONCATENATE name
                sy-datum
                INTO name .
*CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
   no_dailog              = 'X'
   archive_mode           = '3'
IMPORTING
   out_parameters         = print_parameters
   out_archive_parameters = archi_parameters
   valid                  = valid_flag
EXCEPTIONS
   invalid_print_params   = 2
   OTHERS                 = 4.
        CALL FUNCTION 'JOB_OPEN'
          EXPORTING
            jobname          = name
          IMPORTING
            jobcount         = number
          EXCEPTIONS
            cant_create_job = 1
            invalid_job_data = 2
            jobname_missing = 3
            OTHERS           = 4.
        IF sy-subrc = 0.
          print_parameters-pdest = 'locl'.
          SUBMIT zsd_crdr_monthend_back_process
                  TO SAP-SPOOL
                  SPOOL PARAMETERS print_parameters
                  WITHOUT SPOOL DYNPRO
                  VIA JOB name NUMBER number
                AND RETURN.
          IF sy-subrc = 0.
            CALL FUNCTION 'JOB_CLOSE'
              EXPORTING
                jobcount             = number
                jobname              = name
                strtimmed            = 'X'
              EXCEPTIONS
                cant_start_immediate = 1
                invalid_startdate    = 2
                jobname_missing      = 3
                job_close_failed     = 4
                job_nosteps          = 5
                job_notex            = 6
                lock_failed          = 7
                OTHERS               = 8.
Second Program
Program zsd_crdr_monthend_back_process.
DATA: wa_invdata(10) TYPE c VALUE 'INVDATA'.
DATA: wa_month(10) TYPE c VALUE 'MONTH'.
DATA: wa_process(10) TYPE c VALUE 'PROCESS'.
IMPORT e_invdata = it_tab[]
FROM SHARED BUFFER indx(st) ID wa_invdata.
IF sy-subrc NE 0 OR it_tab[] IS INITIAL..
   No data found for the Month end processing
    MESSAGE s398(00)
       WITH 'No Data Found'.
    STOP.
ELSE.
found the data
    IMPORT e_process = it_inv_data[]
    FROM SHARED BUFFER indx(st) ID wa_process.
    IMPORT e_month = wa_month_end
    FROM SHARED BUFFER indx(st) ID wa_month.
Thanks for your help.

Import collides with another import statement

Similar Messages

Maybe you are looking for