Import data is maintained through VI09

I have changed the import data through VI09 and saved the document. But the same changes are not reflecting in my Purchase order.
I have changed city of origin and mode of transport but this is not reflecting in my PO.
This scenario is not for stock material.
Can you post your suggestion on this.

Hello,
This question is not related to Solution Manager.
Please close this thread and find a suitable Financials F I Forum for this question.
Solution Manager has nothign to do with Purchase Orders.
Regards,
Paul

Similar Messages

Import data in user define table through DTW.

Hi experts,
Can any one tell me how can i import data from excle in User define tables through DTW. Is any other way/tool avaliable to
import data from excel sheet to User define tables
BR,
Hari

Hi Hari,
I suppose u did not do the following..
1. Open DTW, in the menu click on advanced and clik on maintain interface...
2. Now here select the UDT which u want to impot the data.
3. right click on the UDT and click on Create template for structure
4. NOw u use this tempalte and try.
Please inform of the outcome so that i can think of another soluton.
Hope it helps,
Vasu Natari.

While import data through ff_5 i am getting error

hello
while import data through ff_5 i am getting error as below
message error fv150 and fv151
'Termination in statement no. 00009 of acct
1101200570116; closing record 62F missing'
so please give solution
thank inadvance
SIRI

Dear Siri,
I guess you are importing an MT940 format. This format should have the closing balance at the end.
This closing balance starts with :62F:
A sample is
:61:0801180118DR3835,97NTRF000000//000000//
:86:1022 LTD CHENNAI18012008
:61:0801180118DR69885,09NCHK850819//850819//
:86:6101 LTD COCHIN18012008
:62F:C080118INR7210048,86
I guess that is missing in the import file.
Maintain that and the import will happen.
Assign points if useful
regards
Venkatesh

Importing data through javascript

I am attempting to populate fields that are generated through a static pdf, but that all contain the same type of data.
All of this data is selectable and can be copied out of the source, so I figured that it would be possible to pull it through a javascript command.
Currently when you view the pdf file in notepad this appears:
(Notes: ) Tj
/F14 10.56 Tf
1 0 0 1 228 668.64 Tm
-0.107 Tc 0.052 Tw (Jim's Taxi quote 123) Tj
1 0 0 1 22.08 702.24 Tm
-0.122 Tc 0.067 Tw (Jim Pinto) Tj
1 0 0 1 22.08 690.24 Tm
-0.071 Tc 0.017 Tw (Jim's Taxi.) Tj
1 0 0 1 22.08 678.24 Tm
-0.077 Tc 0.022 Tw (123 main st) Tj
1 0 0 1 22.08 666.24 Tm
-0.085 Tc 0.031 Tw (Houston) Tj
1 0 0 1 22.08 654.24 Tm
-0.103 Tc 0.048 Tw (TX) Tj
/F15 12 Tf
1 0 0 1 411.36 154.56 Tm
-0.091 Tc 0 Tw
I already have a button attaching the file to the document. I would also like for that button to read the values in the notes section of the pdf. Every item I need ALWAYS appears after the Tw and occurs in brackets; Tw (*) while the numbering changes.
So the command needs to read the file, find the (Notes: ) section, copy the first value (Jim's Taxi quopte 123) and enter it into a field, find the next value (Jim Pinto) and copy it into the name field etc. In this way, by simply selecting the file, regardless of the pdf's orgins and have it populate the data field predetermined (i.e the first field is ALWAYS the customers company name.)
Can anyone here provide a little insight on the way to go about doing this? I am getting a bit stuck.

Hi Gaurav,
Thanks for your reply. I know about export button but my requirement is to import data into other web based application through HTTP post.
Thanks,
Arvind

Need Help in importing data through HTTP post by using OAF

Hello Everyone,
I have one requirement of importing data from Job Posting page of iRecruitment into other application or into other file like csv/xml/txt through HTTP post by using Oracle Application Framework.
Please help me out in the same if anyone know about how to achieve this kind of requirement.
Help is highly appreciated.
Thanks,
Arvind
Edited by: user636850 on Sep 18, 2009 5:35 AM

Hi Gaurav,
Thanks for your reply. I know about export button but my requirement is to import data into other web based application through HTTP post.
Thanks,
Arvind

Creating my own Import data through CSV

Hi,
I want to create a Import data application which consist of import the CSV to a existing table.The same thing the way HTMLDB does while importing data via spreadsheet.Is it really possible ? If then how can i proceed ? Can anyone suggest .
Regards,
ROSY

Hi,
I want to create a Import data application which
hich consist of import the CSV to a existing
table.The same thing the way HTMLDB does while
importing data via spreadsheet.Is it really possible
? If then how can i proceed ? Can anyone suggest .Unfortunately, you're left to your own devices to implement the UI. That's the bad news. The good news is that you can probably use any of the relevant packages in the FLOWS_nnnnnn (depending on your HTML DB version) schema to do the backend work for you.
If you have tools to browse the backend like TOAD or Enterprise Manager then take a look through the FLOWS_nnnnnn schema and look at the packages under WWV_FLOW_LOAD_DATA, or something to that effect. Can't remember exactly right now.
Earl

HT1338 I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my h

I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

How to import date through DTW

Hello Experts,
In DTW how can import Date Field in SAP B1, I Try import as string but its not working .
Regards.
ShriX.

Hello ShriX,
DTW date has fixed format YYYYMMDD.
Try it.
Thanks,
Gordon

Import data into an UDF

Hi experts,
I know I can import data through DTW. but since it has fixed format of template. how can I import data into user-defined fields?
Thanks...

Hi Vic,
Open the DTW, Log on to a company,
Under the menu --> Advansed, click on the Maintain Interface.
A window appears
Select the Object from drop down field, Ex. oBusinessPartners,
Click on the + Sign next to the expand the desired object.
You can find all the Userdefined fields there in the tree view.
Right click on parent node of the Tree and click on Create Template for the structure.
A Save As window appears to save the new template,
Give the path and save the file,
Now the new Template contains all the Userdefined fields also.
Regards
Reno.

Trunccolumn value while importing data to physical layer in RPD

Hi All,
While importing data from database, I want to trunc few column values so that I can put complex join, but I am not getting any link to do so.
Can anyone suggest me that if on database, if two tables are linked by outer join, than how can I restore the same join state in Physical layer while maintaining star schema.
Thanks in advance.

Hi,
I am using version 10.1.3.4.0
This query is a select type physical table in a physical layer of the RPD
select distinct project_no,project_name from cw_vertical_d where project_no = VALUEOF(NQ_SESSION."Project_Number")
NQ_SESSION."Project_Number" is a session non system variable.I am trying to set this variable through a dashboard prompt ( as a request variable ).
So when a user selects any value in the dashboard prompt then this session non system variable "Project_Number" should be set and then BI Server should fire a query with this value to pick the data from database.
But this report is failing with "*[nQSError: 23006] The session variable, NQ_SESSION."Project_Number", has no value definition*" error.
Don't know what is causing this?
Regards,
Vikas

Is it possible to import data based on filter condition?

HI All,
Is it posisble to import data based on fillter condition? Suppose I have following data
Name,City
A,HYD
B,HYD
C,MUM
D,DEL,
E,DEL
F,HYD
Now I want to import only records where city is HYD, is it possible through import manager?
Thanks
Rajeev

Hi Rajeev,
You can filter records during import if one of the Matching field is of type Lookup.
In your case if you create City as flat lookup table in MDM & maintain lookup values in DM(Just as an example), then you can import only records where city is HYD.
Map Name & City, Then in Match Records tab select both the fields (Combination)
then right click on it & select Filter.. option.
Now new pop up will open where you be able to see ur Lookup table values, from there select HYD and Add
Now in default Import Action, set Create Action for None/None (All other will be skip)
This way you will import only HYD records.
But this is possible only on Lookup fields & not foe Text fields
Hope this will help you
Thanks & Regards,
Mahi

How to populate data in MPP through F4 search help(the field should get filtered as per key)

Dear Experts.
I am new to ABAP and hence trying jmy hands on various ways of peforming a task.
I have a requirement. I want to maintain a database tables through MPP : ZLT_Auftrag (Refer Screen Shot 1: Doubt MPP1) and ZLT_Kunde (Refer Screen Shot2: Doubt MPP2)
The fields of ZLT_Kunde are: K1, K2, K3
The fields of ZLT_Auftrag are: A1, A2, A3, A4, P1 P2 and P3 are related as per the key field "A3" (Here A3 = K2)
I want the User to be able to Maintain this table through the Screen that I had created using MPP. (Plz refer the attached Screen Shot3:Doubt MPP3 of the SCREEN in MPP)
When I populate the Kunde name(K1) in the SCREEN (Can be done by F4 Search help), then on hitting the pushbutton "Get Kunde" the kunde Code (K2) appears . Now from here it can be deleted or even a new Kunde name and code can be saved dirctly to the database table : ZLT_Kunde. (Refer Screen Shoot4: Doubt MPP4)
For Example for Kunde (K1)= BASF, Kunde Code (K2) = BSF, the Auftrag should be all those values from ZLT_Auftrag (where A3 = BSF)
When I try to populate the Auftrag value on the SCREEN then on hitting F4 (already created for table ZLT_Auftrag in se11) then I get all the values of Auftrag (A1) from the table ZLT_Auftrag. (Ply refer Screen Shot 5: Doubt MPP5)
MY REQUIREMENT: Here I want that either through F4 help or through drop down ONLY those values of Auftrag-A1 should appear on the SCREEN which satisfies the condition: A3 = K2
I am unbale to get how to do that.
I need your valuable suggstions.
Regards
Chandan

And the code of the MPP is:
*& Module Pool SAPMZDEMO_MPOOL_03
PROGRAM SAPMZDEMO_MPOOL_03.
TABLES: ZLT_MITA, ZLT_Kunde, ZLT_Auftrag, Zlt_Stdsatz.
DATA: flg_lock TYPE c,
* indx TYPE i,
* indxk TYPE i,
* indxa TYPE i,
* TCNT TYPE sy-tabix,
 lv_msgv1 TYPE sy-msgv1.
*DATA: it_mita TYPE TABLE OF ZLT_mita,
* it_kunde TYPE TABLE OF ZLT_KUNDE,
* it_auftrag TYPE TABLE OF ZLT_AUFTRAG.
*& Module STATUS_9000 OUTPUT
* text
module STATUS_9000 output.
SET PF-STATUS 'ZSTATUS01'.
* SET TITLEBAR 'xxx'.
If flg_lock is Not initial.
 LOOP at Screen.
If screen-group1 = 'G1'.
Screen-input = 0.
MODIFY SCREEN.
 Endif.
 ENDLOOP.
 MESSAGE s000(8i) WITH 'Mitarbeiter already locked by user' lv_msgv1.
ENDIF.
endmodule. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9000 INPUT
* text
module USER_COMMAND_9000 input.
*To Populate Data into Mitarbeiter through Pushbuttons
CASE sy-ucomm.
 When 'OK_GET'.
 Clear : flg_lock.
 IF ZLT_MITA-M1 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_MITA
 Where M1 = ZLT_MITA-M1.
*To create a Lock Object so that when two or more employees are accessing the same data
* at the same time then for the new user the data gets locked and only can been seen in
*display mode
 IF sy-subrc = 0.
 CALL FUNCTION 'ENQUEUE_EZLT_MITALOCK'
 EXPORTING
 MODE_ZLT_MITA = 'E'
 MANDT = SY-MANDT
 M1 = ZLT_MITA-M1
* X_M1 = ' '
* _SCOPE = '2'
* _WAIT = ' '
* _COLLECT = ' '
 EXCEPTIONS
 FOREIGN_LOCK = 1
 SYSTEM_FAILURE = 2
 OTHERS = 3
 IF sy-subrc <> 0.
 flg_lock = 'X'.
 lv_msgv1 = sy-msgv1.
 ENDIF.
 ENDIF.
 ELSE.
 MESSAGE S000(8i) With 'Enter Mitarbeiter Name'.
 ENDIF.
 When 'OK_SAVE'.
 Modify ZLT_MITA.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETE'.
 IF ZLT_MITA-M1 is NOT INITIAL.
 DELETE
 FROM ZLT_MITA
 Where M1 = ZLT_MITA-M1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
* When 'OK_FIRST'.
* indx = 1.
* When 'OK_NEXT'.
* indx = indx + 1.
* When 'OK_PREV'.
* indx = indx - 1.
* When 'OK_LAST'.
* Describe Table it_mita lines indx.
*To Populate Data into Kunde through Pushbuttons
 When 'OK_GETK'.
 IF ZLT_Kunde-K1 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_Kunde
 Where K1 = ZLT_KUNDE-K1.
 ELSE.
 MESSAGE S000(8i) With 'Enter Kunde Name'.
 ENDIF.
 When 'OK_SAVEK'.
 Modify ZLT_Kunde.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETEK'.
 IF ZLT_KUNDE-K1 is NOT INITIAL.
 DELETE
 FROM ZLT_KUNDE
 Where K1 = ZLT_KUNDE-K1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
*To Populate Data into Auftrag Through Pushbuttons
 When 'OK_GETA'.
 IF ZLT_KUnde-K2 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_Auftrag
 Where A3 = ZLT_Kunde-K2.
 ELSE.
 MESSAGE S000(8i) With 'Enter Kunde Name'.
 ENDIF.
 When 'OK_SAVEA'.
 Modify ZLT_Auftrag.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETEA'.
 IF ZLT_Auftrag-A1 is NOT INITIAL.
 DELETE
 FROM ZLT_Auftrag
 Where A1 = ZLT_Auftrag-A1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
*To Populate Data into Position Thorugh Pushbuttons
 When 'OK_GETP'.
 IF ZLT_Auftrag-A2 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_Auftrag
 Where A3 = ZLT_Kunde-K2.
 ELSE.
 MESSAGE S000(8i) With 'Enter Kunde Name'.
 ENDIF.
 When 'OK_SAVEP'.
 Modify ZLT_Auftrag.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETEP'.
 IF ZLT_Auftrag-A1 is NOT INITIAL.
 DELETE
 FROM ZLT_Auftrag
 Where A1 = ZLT_Auftrag-A1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
 When 'OK_EXIT'.
 Leave Program.
 When 'OK_CLEAR'.
 Clear : ZLT_MITA, ZLT_KUNDE, ZLT_AUFTRAG.
* it_mita, it_kunde, it_auftrag,
 CALL FUNCTION 'DEQUEUE_EZLT_MITALOCK'
 EXPORTING
 MODE_ZLT_MITA = 'E'
 MANDT = SY-MANDT
 M1 = ZLT_MITA-M1
* X_M1 = ' '
* _SCOPE = '3'
* _SYNCHRON = ' '
* _COLLECT = ' '
ENDCASE.
endmodule. " USER_COMMAND_9000 INPUT
*& Module user_cmd_9000 INPUT
* text
module user_cmd_9000 input.
If sy-ucomm = 'OK_CANCEL'.
LEAVE PROGRAM.
ENDIF.
IF sy-ucomm = 'OK_EXIT'.
 LEAVE PROGRAM.
ENDIF.
endmodule. " user_cmd_9000 INPUT

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

How to import data from a text file into a table

Hello,
I need help with importing data from a .csv file with comma delimiter into a table.
I've been struggling to figure out how to use the "Import from Files" wizard in Oracle 10g web-base Enterprise Manager.
I have not been able to find a simple instruction on how to use the Wizard.
I have looked at the Oracle Database Utilities - Overview of Oracle Data Pump and the Help on the "Import: Files" page.
Neither one gave me enough instruction to be able to do the import successfully.
Using the "Import from file" wizard, I created a Directory Object using the Create Directory Object button. I Copied the file from which i needed to import the data into the Operating System Directory i had defined in the Create Directory Object page. I chose "Entire files" for the Import type.
Step 1 of 4 is the "Import:Re-Mapping" page, I have no idea what i need to do on this page. All i know i am not tying to import data that was in one schema into a different schema and I am not importing data that was in one tablespace into a different tablespace and i am not R-Mapping datafiles either. I am importing data from a csv file.
For step 2 of 4, "Import:Options" page, I selected the same directory object i had created.
For step 3 of 4, I entered a job name and a description and selected Start Immediately option.
What i noticed going through the wizard, the wizard never asked into which table do i want to import the data.
I submitted the job and I got ORA-31619 invalid dump file error.
I was sure that the wizard was going to fail when it never asked me into which table do i want to import the data.
I tried to use the "imp" utility in command-line window.
After I entered (imp), i was prompted for the username and the password and then the buffer size as soon as i entered the min buffer size I got the following error and the import was terminated:
C:\>imp
Import: Release 10.1.0.2.0 - Production on Fri Jul 9 12:56:11 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Username: user1
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Import file: EXPDAT.DMP > c:\securParms\securParms.csv
Enter insert buffer size (minimum is 8192) 30720> 8192
IMP-00037: Character set marker unknown
IMP-00000: Import terminated unsuccessfully
Please show me the easiest way to import a text file into a table. How complex could it be to do a simple import into a table using a text file?
We are testing our application against both an Oracle database and a MSSQLServer 2000 database.
I was able to import the data into a table in MSSQLServer database and I can say that anybody with no experience could easily do an export/import in MSSQLServer 2000.
I appreciate if someone could show me how to the import from a file into a table!
Thanks,
Mitra

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

Import Data to MDM

Hi All,
I have 2 question regarding Key Mapping, while importing data via Data Manager. We are using SAP MDM 7.1 SP04 (117)
1. Load data to a Lookup table, from 2 different source system. I have an Lookup table, to which i will have to load data from 2 different systems say A, B
and both A and B has a different Key, which i will have to store in the Remote Key.
How to Import this data
Remote System Remote Key Name Code
1. A 1 AAA A1
2. B 2 AAA A1
In the above example, same code and Name has 2 different Remote system and remote key... how to load this data to MDM using Import Manager
2. Load data to Main table for lookup fields. I have a set of lookup tables, for which the data are loaded from system A and say remote Key 1.
But, the data to the main table comes from System B, so the data for these lookup fields are not getting mapped automatically, as it doesnot find the remote system in that lookup. How to load the data, to these fields in the lookup, automatically, without doing a manual value mapping.
Thanks,
Priya.

Hi Priya,
If these Systems A and B are SAP systems, then you should go for MDMGX T-code, for reference data (look-up data) into MDM. Importing look-up data from SAP systems using MDMGX is the Recommended/Standard way. You will then import this reference (look-up data) from both of these systems using Remote Key Concept and you will not face this difficulty. Here you will not face any issue, look-up values get automatically mapped whether Main table data comes from System A or System B.
If you have Source file with four fields as given below:
Remote System Remote Key Name Code
1. A 1 AAA A1
2. B 2 AAA A1
Then Segregate Records on the basis of Remote systems with two files, one file which will contain records pertaining to Remote System A only and other file contains records with Remote System B only.
Now, Import the data using import manager remote system for these two files separately for Remote System A and Remote System B using Remote Key concept. Once you Import data in this way, you will see both these Remote Systems with key (I mean two values) in Edit Key mapping when you right click on any record of this look up flat table using MDM Data Manager.
Here you will see Remote system B with Key 2 also.
Other alternative, You can also add these Remote key values for System B manually using MDM Data Manager Edit Key mapping. But it will take time to add value for each of records for this look-up flat table for Remote System B.
Your problem for importing main table records from Remote System B will be resolved because now these look-up values get automatically mapped as remote key for both systems maintained into look-up tables.
Regards,
Mandeep Saini

Import data is maintained through VI09

Similar Messages

Maybe you are looking for