Import/Export from Memory ID

hie guys
im in a program that is importing values from a memory id however there are no values being imported and thus i want to find out wer the memory id is being given data. i tryd the wer used list and it dd not give me anything, please assist

I managed to find the program where the export statement for the memory ID was and also where the import statement was and managed to resolve my error.
many thanks.

Similar Messages

Memory Limit for "IMPORT/EXPORT from MEMORY ID" statement

Hi All,
Can anyone tell me whether there is any memory limit exists for "IMPORT/EXPORT from MEMORY ID" statement.
Like may be we can transfer xx MB of data via this......or it is open, we can transfer any amount of data to ABAP memory via this.
Regards
Munish Garg

1. Each user sessions have external sessions and each external sessions have internal sessions.
2. The programs being executed in the internal sessions can access ABAP memory
3.ABAP memory is a storage area for internal program variables like fields, structures, internal tables,,They can be passed between internal sessions of an external session.
4. you can transfer data through ABAp memory using IMPORT and EXPORT statements
5. after IMPORT FROM MEMORY ID <id> , you can use sy-subrc to check the existance of the cluster ID. here sy-subrc is not used to check whether the Import was successful or not.

How to Export data to memory and Import data from memory?

hi
I have the follwoing some code of program.
The data is not filled from memory. I have to find what is the wrong in code.
REPORT ZIFT_TEST1..
SELECT-OPTIONS : so_budat FOR bkpf-budat,
sd_saknr FOR ska1-saknr.
EXPORT so_budat TO MEMORY ID 'ZBUDAT'.
EXPORT sd_saknr TO MEMORY ID 'ZSAKNR'.
SUBMIT ZIFT_TEST2 AND RETURN.
REPORT ZIFT_TEST2..
SELECT-OPTIONS so_budat FOR bsis-budat NO DATABASE SELECTION.
SELECT-OPTIONS: SD_SAKNR FOR SKA1-SAKNR MATCHCODE OBJECT SAKO.
import so_budat = so_budat from memory id 'ZBUDAT'.
import sd_saknr from memory id 'ZSAKNR'.
Regards
Iftikhar Ali
Islamabad.

Program1----
REPORT demo_program_rep3 NO STANDARD PAGE HEADING.
DATA: number TYPE i,
itab TYPE TABLE OF i.
SET PF-STATUS 'MYBACK'.
DO 5 TIMES.
number = sy-index.
APPEND number TO itab.
WRITE / number.
ENDDO.
TOP-OF-PAGE.
WRITE 'Report 2'.
ULINE.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'MBCK'.
EXPORT itab TO MEMORY ID 'HK'.
LEAVE.
ENDCASE.
Program2----
REPORT demo_programm_leave NO STANDARD PAGE HEADING.
DATA: itab TYPE TABLE OF i,
num TYPE i.
SUBMIT demo_program_rep3 AND RETURN.
IMPORT itab FROM MEMORY ID 'HK'.
LOOP AT itab INTO num.
WRITE / num.
ENDLOOP.
TOP-OF-PAGE.
WRITE 'Report 1'.
ULINE.
end of program 2----
Now you copy this programs with same name as i mentioned and execute demo_programm_leave Program.you will understnad clearly.
Notes::: A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.

Import/export to memory and global variables

Hi,
Im working on some functionality using import/export to memory. One of the statements is:
import gf_memid_exit = g_exit_flag gf_memid_result = t352r from memory id 'ZREV_EXT'.
Im using global variables to contain the cluster names. But this is not working. When I change the global variables into local variables, it works. It this normal? Because I would like to have global variables (even better I would like to have global constants) to declare in order to use them within the program.
Any ideas?
With regards,
Mike

Hi Mike...
I think with import u can use global or local variables..in debug mode pl. check when u r using global variables..whether it is getting cleared or overwritten by some other values or not. Or try with global constants..it should work...
Regards,
Joy.

ECC6 IMPORT/EXPORT to MEMORY ID 'OPENFI00002213E'

Hi experts,
I have a problem with IMPORT/EXPORT in ECC6 within the same program. The short dump happenned at IMPORT time. Here is part of my code.
DATA: MEMID13(15) VALUE 'OPENFI00002213E',
          T_VBKPF LIKE VBKPF OCCURS 0 WITH HEADER LINE.
EXPORT t_vbkpf TO MEMORY ID memid13.
CALL TRANSACTION 'FV60'
     USING bdcdata
     OPTIONS FROM s_ctu_params
     MESSAGES INTO bdcmsgcoll.
IMPORT t_vbkpf FROM MEMORY ID memid13.
In 4.6C, the internal table t_vbkpf was updated with the created document from the transaction 'FV60' call but it gave a short dump in ECC6.
Runtime Errors         CONNE_IMPORT_WRONG_STRUCTURE
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          2007.12.06 15:46:46
Short text
     Error when importing object "T_VBKPF".
Please help, thanks!
CHuong

Hi,
In ECC 6 for import from memory you need the import structure will be flat , character-type data
The following is from documentation.
+
If MEMORY is specified, the data cluster that was written to the ABAP Memory under the identification specified in id with the statement EXPORT is imported. For id, a flat , character-type data object is expected. This object contains the identification of the data cluster.
+
otherwise use this way
TYPES:
BEGIN OF tab,
    col1 TYPE i,
    col2 TYPE i,
END OF tab.
DATA:
wa_indx TYPE indx,
wa_itab TYPE tab,
cl      TYPE mandt VALUE '100',
itab    TYPE STANDARD TABLE OF tab.
IMPORT tab = itab
FROM DATABASE indx(xy)
TO   wa_indx
CLIENT cl
ID 'TABLE'.
WRITE: wa_indx-aedat, wa_indx-usera, wa_indx-pgmid.
ULINE.
LOOP AT itab INTO wa_itab.
WRITE: / wa_itab-col1, wa_itab-col2.
ENDLOOP.
a®

Import term_rgdir from memory id rgdirid

Hi
SY-SUBRC of Following statement is 4
import term_rgdir from memory id rgdirid
Could you please suggest me what needs to be done to rectify this issue.
Regards
Sri

Either you did not export it properly or you will need some variable to import into; please see sample code below:
Program for Export
Data : gv_flag(1) type c,
id(10) type c Value 'FLAG'.
gv_flag = 'X'.
Export gv_flag from gv_flag to memory id id.
Program for Import
Data : gv_flag(1) type c,
id(10) type c Value 'FLAG'.
Import gv_flag to gv_flag from memory id id.
If gv_flag eq 'X'.
Endif.

IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.

Can you please explain what the following syntax is doing .
IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.

Hi,
Letu2019s take a scenario where we need an internal table which is in program (letu2019s say Prog_name) which contains some Employee verification data in respect of one personnel no. Now our requirement is to use the same internal table in our program, so we will first export the personnel no to a memory id.
Passing value of perner to Memory ID u2018Memo1u2019
Export pernr to MEMORY id 'Memo1'.
Now submit to the program
Submit Prog_name AND RETURN .
Now we are importing u2018it_tableu2019 from Prog_name based on the value of pernr
Import it_table from MEMORY id 'ABC' .
Now we have to add Export parameter code in target program (Prog_name).
INITIALIZATION.
import pernr from memory id 'Memo1' .
After the internal table is appended we need to export it to again memory id (Memo1)
END-OF-SELECTION.
export it_table to memory id 'Memo1' .
Thanks,
Krishna

IMPORT itab FROM MEMORY ID - doubt

Hello all,
In my program I am using the statement like given below.
IMPORT ITAB_TDR FROM MEMORY ID 'PPI'. I am getting Sy-subrc = 4.
The reason might be either Unable to import data objects or The ABAP memory was probably empty or The contents of all listed objects remain unchanged.
Now my question is-> How to store the data in the ABAP memory so that I can get the datas in ITAB_TDR in my import stmt.
Thanks in advance,
Balaji

JUST CHECK RPR_ABAP_SOURCE_SCAN REPORT IN SE38 AND GIVE THE STRING THERE IT WILL SHOW THE REPORT NAME. OR JUST PUT ABAPSOURCESCAN IN SE38 AND PRESS F4. IF IT IS A Z PROGRAM THEN GIVE PROG NAME AS Z*.
IF YOU GET THE PROG NAME THEN YOU HAVE TO RUN THAT PROG TO EXPORT THE VALUE IN MEMORY ID.
AFTER THAT ONLY YOU CAN USE IMPORT.
REGARDS
SHIBA DUTTA

Plz explain - IMPORT GS_MATNR_CTRL FROM MEMORY ID 'ZMEM' ?

Hello,
Very good evening!
Can any one please explain me what this satement do.
Please explain me.......
IMPORT GS_MATNR_CTRL FROM MEMORY ID 'ZMEM'.
Any suggestions or information will be appreciated.
Regadrs,
KIttu

Hello,
Thank you for your response and time!
Points rewarded...
Have a good day!
Regards,
Kittu

How to import/export   from d2k

hi
hi please could you help me in how to import/export from d2k.
M.P.Kiran Kumar

FUNCTION open_ldr RETURN varchar2 IS
out_file Text_io.File_Type;
     v_filename varchar2(255);
Begin
out_file := Text_IO.Fopen('C:sqlldr.ini', 'R'); /* create a file so that u can store sqlldr path first time it wont be there so write the path after verifying */
text_io.get_line(out_file,v_filename);
--message(v_filename);
return(v_filename);
Exception when others then
     --message('Check For Sqlldr73.exe or Sqlldr*.exe');
v_filename := get_file_name(File_Filter=>'sqlldr Files (*.exe)|*.exe|');
out_file := Text_IO.Fopen('C:\sqlldr.ini', 'W');
     Text_IO.Put(out_file,v_filename);
Text_IO.Fclose (out_file);
if v_filename is null then
     Message('Please Select The Sqlldr Path ');
     Message('Please Select The Sqlldr Path ');
     raise form_trigger_failure;
end if;
return(v_filename);
End;
     Declare
          The_userid varchar2(100):='';
          The_Password varchar2(100):='';
          The_connectstring varchar2(100):='';
          Con_Info varchar2(100):='';
          the_command varchar2(200):='';
          v_filename varchar2(100);
          cursor c1 is select tname from <table_name > /* create a table in ur schema and put all the tables which u want to export */ where tabtype = 'MASTER';
     Begin
          v_filename:=open_ldr;
     The_userid := Get_Application_Property(UserName);
               The_Password := Get_Application_Property(Password);
               The_connectstring := Get_Application_Property(Connect_String);
               Con_Info := The_userid||'/'||The_Password||'@'||The_connectstring;
               for c1rec in c1 loop
               C2K_TRUNC_HLL_MASTERS(c1rec.tname);
               the_command := v_filename||' Control=c:\'||c1rec.tname||'.ctl userid='||Con_Info; -- Change This According To The Path
               -- message(the_command);message(the_command);
Host(the_command);
               End Loop;
               the_command := v_filename||' Control=c:\control'||'.ctl userid='||Con_Info; -- Change This According To The Path
               host(the_command);
               Exception When Others Then
                    Message('Error'||' '||sqlerrm);
                    Message('Error'||' '||sqlerrm);
     End;
If u have any problems please contact me on [email protected]
furnish the details properly .

Function module to EXPORT/IMPORT to/from MEMORY?

Hi Gurus,
As EXPORT /IMPORTstatements come under obsolete statements.SO i am getting error in code when i compile using code inspector.
PLease let me know if there is any function module that does the work of EXPORT and IMPORT.
It woukl be kind if you explain how to put values in those function module to get desired output.
Thanks

Hi ,
You can use these FM
Export to Memory
C14Z_EXPORT_field_TO_MEMORY
C14Z_EXPORT_TO_MEMORY
Import From Memory
C14Z_IMPORT_FIELD_FROM_MEMORY
C14Z_IMPORT_FROM_MEMORY
Regards,
Seema

Exporting and importing data from memory

Hi Gurus,
Written 2 programs.
1st program executes and submits 2nd program in background.
Now the output in internal table which we get in 2nd program has to be displayed in 1st program.
My taught is to use Set ID and GET ID to retrieve the data.
How can we achive this?

Hi,
You can pass the internal table by using
export to memory id
and import that internal table in the called program.
Use SUBMIT ....AND RETURN.

Importing contacts from memory card

Have recently got new 5800 after mine got wet. The new one is slightly different and I have put my memory card from old one into new phone.
I can't seem to find the right route to import my numbers off my memory card.
I'm sure the card is not corrupted as it had all my music on which automatically transfered when I opened real player.

file manager>double click the memory card>option>copy contacts>from memory card...
this is how i remembered doing it.

IMPORT/EXPORT FROM DATA BUFFER

Hi,
I have some code like this:
DATA: b type xstring.
DATA: a type xstirng.
EXPORT '1234' TO DATA BUFFER b.
IMPORT a FROM DATA BUFFER b.
for some reason a does not get set to the value that I assigned to b.
However, this code works:
DATA: b type xstring.
DATA: a type xstirng.
EXPORT some_internal_table TO DATA BUFFER b.
IMPORT a FROM DATA BUFFER b.
Does anybody know why internal tables work but other data types do not?
Thank you.

EXPORT '1234' TO DATA BUFFER b, not working because, you did not assign a variable name to '1234' to be stored as in data buffer B.
Change the code to:
DATA: b type xstring.
DATA: a(4) type c.
EXPORT a = '1234' TO DATA BUFFER b.
IMPORT a FROM DATA BUFFER b.
It's working in the second case because, some_internal_table is the name of the variable in databuffer B and you are importing into the same variable in IMPORT
Regards
Sridhar

IMPORT & EXPORT from/to compressed files directly...

for newbies a tip to import(export) directly to(from) compressed files using pipes . Its for Unix based systems only, as I am not aware of any pipe type functionality in Windows. The biggest advantage is that you can save lots of space as uncompressing a file makes it almost 5 times or more. (Suppose you are uncompressing a file of 20 GB, it will make 100 GB) As a newbie I faced this problem, so thought about writing a post.
Lets talk about export first. The method used is that create a pipe, write to a pipe(ie the file in exp command is the pipe we created), side by side read the contents of pipe, compress(in the background) and redirect to a file. Here is the script that achieves this:
export ORACLE_SID=MYDB
rm -f ?/myexport.pipe
mkfifo ?/myexport.pipe
cat ?/myexport.pipe |compress > ?/myexport.dmp.Z &
sleep 5
exp file=?/myexport.pipe full=Y log=myexport.logSame way for import, we create a pipe, zcat from the dmp.Z file, redirect it to the pipe and then read from pipe:
export ORACLE_SID=MYDB
rm -f ?/myimport.pipe
mkfifo ?/myimport.pipe
zcat ?/myexport.dmp.Z > ?/myimport.pipe &
sleep 5
imp file=myimport.pipe full=Y show=Y log=?/myimport.logIn case there is any issue with the script, do let me know :)
Experts, please have a look...is it fine ? (Actually I dont have Oracle installed on my laptop(though have Fedora 6) so couldnt test the scripts)
I posted the same on my blog too. just for bookmark ;)
Sidhu
http://amardeepsidhu.blogspot.com

actually, only the compression thing runs in the background. rest proceeds like normal only. just instead of giving normal file we use pipe as a file.
nice article about named pipes
Sidhu

Import/Export from Memory ID

Similar Messages

Maybe you are looking for