Memory Limit for "IMPORT/EXPORT from MEMORY ID" statement
Hi All,
Can anyone tell me whether there is any memory limit exists for "IMPORT/EXPORT from MEMORY ID" statement.
Like may be we can transfer xx MB of data via this......or it is open, we can transfer any amount of data to ABAP memory via this.
Regards
Munish Garg
1. Each user sessions have external sessions and each external sessions have internal sessions.
2. The programs being executed in the internal sessions can access ABAP memory
3.ABAP memory is a storage area for internal program variables like fields, structures, internal tables,,They can be passed between internal sessions of an external session.
4. you can transfer data through ABAp memory using IMPORT and EXPORT statements
5. after IMPORT FROM MEMORY ID <id> , you can use sy-subrc to check the existance of the cluster ID. here sy-subrc is not used to check whether the Import was successful or not.
Similar Messages
-
Import/Export from Memory ID
hie guys
im in a program that is importing values from a memory id however there are no values being imported and thus i want to find out wer the memory id is being given data. i tryd the wer used list and it dd not give me anything, please assistI managed to find the program where the export statement for the memory ID was and also where the import statement was and managed to resolve my error.
many thanks. -
How to Export data to memory and Import data from memory?
hi
I have the follwoing some code of program.
The data is not filled from memory. I have to find what is the wrong in code.
REPORT ZIFT_TEST1..
SELECT-OPTIONS : so_budat FOR bkpf-budat,
sd_saknr FOR ska1-saknr.
EXPORT so_budat TO MEMORY ID 'ZBUDAT'.
EXPORT sd_saknr TO MEMORY ID 'ZSAKNR'.
SUBMIT ZIFT_TEST2 AND RETURN.
REPORT ZIFT_TEST2..
SELECT-OPTIONS so_budat FOR bsis-budat NO DATABASE SELECTION.
SELECT-OPTIONS: SD_SAKNR FOR SKA1-SAKNR MATCHCODE OBJECT SAKO.
import so_budat = so_budat from memory id 'ZBUDAT'.
import sd_saknr from memory id 'ZSAKNR'.
Regards
Iftikhar Ali
Islamabad.Program1----
REPORT demo_program_rep3 NO STANDARD PAGE HEADING.
DATA: number TYPE i,
itab TYPE TABLE OF i.
SET PF-STATUS 'MYBACK'.
DO 5 TIMES.
number = sy-index.
APPEND number TO itab.
WRITE / number.
ENDDO.
TOP-OF-PAGE.
WRITE 'Report 2'.
ULINE.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'MBCK'.
EXPORT itab TO MEMORY ID 'HK'.
LEAVE.
ENDCASE.
Program2----
REPORT demo_programm_leave NO STANDARD PAGE HEADING.
DATA: itab TYPE TABLE OF i,
num TYPE i.
SUBMIT demo_program_rep3 AND RETURN.
IMPORT itab FROM MEMORY ID 'HK'.
LOOP AT itab INTO num.
WRITE / num.
ENDLOOP.
TOP-OF-PAGE.
WRITE 'Report 1'.
ULINE.
end of program 2----
Now you copy this programs with same name as i mentioned and execute demo_programm_leave Program.you will understnad clearly.
Notes::: A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement. -
ECC6 IMPORT/EXPORT to MEMORY ID 'OPENFI00002213E'
Hi experts,
I have a problem with IMPORT/EXPORT in ECC6 within the same program. The short dump happenned at IMPORT time. Here is part of my code.
DATA: MEMID13(15) VALUE 'OPENFI00002213E',
T_VBKPF LIKE VBKPF OCCURS 0 WITH HEADER LINE.
EXPORT t_vbkpf TO MEMORY ID memid13.
CALL TRANSACTION 'FV60'
USING bdcdata
OPTIONS FROM s_ctu_params
MESSAGES INTO bdcmsgcoll.
IMPORT t_vbkpf FROM MEMORY ID memid13.
In 4.6C, the internal table t_vbkpf was updated with the created document from the transaction 'FV60' call but it gave a short dump in ECC6.
Runtime Errors CONNE_IMPORT_WRONG_STRUCTURE
Except. CX_SY_IMPORT_MISMATCH_ERROR
Date and Time 2007.12.06 15:46:46
Short text
Error when importing object "T_VBKPF".
Please help, thanks!
CHuongHi,
In ECC 6 for import from memory you need the import structure will be flat , character-type data
The following is from documentation.
+
If MEMORY is specified, the data cluster that was written to the ABAP Memory under the identification specified in id with the statement EXPORT is imported. For id, a flat , character-type data object is expected. This object contains the identification of the data cluster.
+
otherwise use this way
TYPES:
BEGIN OF tab,
col1 TYPE i,
col2 TYPE i,
END OF tab.
DATA:
wa_indx TYPE indx,
wa_itab TYPE tab,
cl TYPE mandt VALUE '100',
itab TYPE STANDARD TABLE OF tab.
IMPORT tab = itab
FROM DATABASE indx(xy)
TO wa_indx
CLIENT cl
ID 'TABLE'.
WRITE: wa_indx-aedat, wa_indx-usera, wa_indx-pgmid.
ULINE.
LOOP AT itab INTO wa_itab.
WRITE: / wa_itab-col1, wa_itab-col2.
ENDLOOP.
a® -
Import term_rgdir from memory id rgdirid
Hi
SY-SUBRC of Following statement is 4
import term_rgdir from memory id rgdirid
Could you please suggest me what needs to be done to rectify this issue.
Regards
SriEither you did not export it properly or you will need some variable to import into; please see sample code below:
Program for Export
Data : gv_flag(1) type c,
id(10) type c Value 'FLAG'.
gv_flag = 'X'.
Export gv_flag from gv_flag to memory id id.
Program for Import
Data : gv_flag(1) type c,
id(10) type c Value 'FLAG'.
Import gv_flag to gv_flag from memory id id.
If gv_flag eq 'X'.
Endif. -
Import/export to memory and global variables
Hi,
Im working on some functionality using import/export to memory. One of the statements is:
import gf_memid_exit = g_exit_flag gf_memid_result = t352r from memory id 'ZREV_EXT'.
Im using global variables to contain the cluster names. But this is not working. When I change the global variables into local variables, it works. It this normal? Because I would like to have global variables (even better I would like to have global constants) to declare in order to use them within the program.
Any ideas?
With regards,
MikeHi Mike...
I think with import u can use global or local variables..in debug mode pl. check when u r using global variables..whether it is getting cleared or overwritten by some other values or not. Or try with global constants..it should work...
Regards,
Joy. -
Plz explain - IMPORT GS_MATNR_CTRL FROM MEMORY ID 'ZMEM' ?
Hello,
Very good evening!
Can any one please explain me what this satement do.
Please explain me.......
IMPORT GS_MATNR_CTRL FROM MEMORY ID 'ZMEM'.
Any suggestions or information will be appreciated.
Regadrs,
KIttuHello,
Thank you for your response and time!
Points rewarded...
Have a good day!
Regards,
Kittu -
IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.
Can you please explain what the following syntax is doing .
IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.Hi,
Letu2019s take a scenario where we need an internal table which is in program (letu2019s say Prog_name) which contains some Employee verification data in respect of one personnel no. Now our requirement is to use the same internal table in our program, so we will first export the personnel no to a memory id.
Passing value of perner to Memory ID u2018Memo1u2019
Export pernr to MEMORY id 'Memo1'.
Now submit to the program
Submit Prog_name AND RETURN .
Now we are importing u2018it_tableu2019 from Prog_name based on the value of pernr
Import it_table from MEMORY id 'ABC' .
Now we have to add Export parameter code in target program (Prog_name).
INITIALIZATION.
import pernr from memory id 'Memo1' .
After the internal table is appended we need to export it to again memory id (Memo1)
END-OF-SELECTION.
export it_table to memory id 'Memo1' .
Thanks,
Krishna -
IMPORT itab FROM MEMORY ID - doubt
Hello all,
In my program I am using the statement like given below.
IMPORT ITAB_TDR FROM MEMORY ID 'PPI'. I am getting Sy-subrc = 4.
The reason might be either Unable to import data objects or The ABAP memory was probably empty or The contents of all listed objects remain unchanged.
Now my question is-> How to store the data in the ABAP memory so that I can get the datas in ITAB_TDR in my import stmt.
Thanks in advance,
BalajiJUST CHECK RPR_ABAP_SOURCE_SCAN REPORT IN SE38 AND GIVE THE STRING THERE IT WILL SHOW THE REPORT NAME. OR JUST PUT ABAPSOURCESCAN IN SE38 AND PRESS F4. IF IT IS A Z PROGRAM THEN GIVE PROG NAME AS Z*.
IF YOU GET THE PROG NAME THEN YOU HAVE TO RUN THAT PROG TO EXPORT THE VALUE IN MEMORY ID.
AFTER THAT ONLY YOU CAN USE IMPORT.
REGARDS
SHIBA DUTTA -
Importing contacts from memory card
Have recently got new 5800 after mine got wet. The new one is slightly different and I have put my memory card from old one into new phone.
I can't seem to find the right route to import my numbers off my memory card.
I'm sure the card is not corrupted as it had all my music on which automatically transfered when I opened real player.file manager>double click the memory card>option>copy contacts>from memory card...
this is how i remembered doing it. -
Application for importing videos from a digital camera
I have a Canon PowerShot SD100 that I got a year and a half ago. It came with a CD that included software that could be used to import both the pictures and videos it took. However, after installing it, the CD got lost, probably ended up in the trash, and now I have no way to import the videos onto my new computer. (I use iPhoto for the pictures.)
Canon doesn't have a version of that same software, called ImageBrowser, available for download, and I've looked on my computer, but I can't seem to find any application that I could use to import the videos.
If anyone knows of a free application that would let me import my videos, I'd greatly appreciate it.
Thanks a ton!
JillI don't use any software for importing videos from my camera I take the memory card out the camera. I insert it into my card reader. The memory card mounts on my desktop I can then drag and drop the movies from the card into my movies folder.
-
I just downloaded Firefox 3.6 and followed the instructions for importing Favorites from Internet Explorer. Firefox said the import was successful, but the Favorites do not appear at the bottom of the Bookmarks menu (below "Mozilla Firefox") as shown in the Support instructions. Where can I access my Favorites?
You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Organize Bookmarks).<br />
If you can't find them in the "From Internet Explorer" folder then try this:
* Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
* Import the HTML file in Firefox: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
See also http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file") -
How to import/export from d2k
hi
hi please could you help me in how to import/export from d2k.
M.P.Kiran KumarFUNCTION open_ldr RETURN varchar2 IS
out_file Text_io.File_Type;
v_filename varchar2(255);
Begin
out_file := Text_IO.Fopen('C:sqlldr.ini', 'R'); /* create a file so that u can store sqlldr path first time it wont be there so write the path after verifying */
text_io.get_line(out_file,v_filename);
--message(v_filename);
return(v_filename);
Exception when others then
--message('Check For Sqlldr73.exe or Sqlldr*.exe');
v_filename := get_file_name(File_Filter=>'sqlldr Files (*.exe)|*.exe|');
out_file := Text_IO.Fopen('C:\sqlldr.ini', 'W');
Text_IO.Put(out_file,v_filename);
Text_IO.Fclose (out_file);
if v_filename is null then
Message('Please Select The Sqlldr Path ');
Message('Please Select The Sqlldr Path ');
raise form_trigger_failure;
end if;
return(v_filename);
End;
Declare
The_userid varchar2(100):='';
The_Password varchar2(100):='';
The_connectstring varchar2(100):='';
Con_Info varchar2(100):='';
the_command varchar2(200):='';
v_filename varchar2(100);
cursor c1 is select tname from <table_name > /* create a table in ur schema and put all the tables which u want to export */ where tabtype = 'MASTER';
Begin
v_filename:=open_ldr;
The_userid := Get_Application_Property(UserName);
The_Password := Get_Application_Property(Password);
The_connectstring := Get_Application_Property(Connect_String);
Con_Info := The_userid||'/'||The_Password||'@'||The_connectstring;
for c1rec in c1 loop
C2K_TRUNC_HLL_MASTERS(c1rec.tname);
the_command := v_filename||' Control=c:\'||c1rec.tname||'.ctl userid='||Con_Info; -- Change This According To The Path
-- message(the_command);message(the_command);
Host(the_command);
End Loop;
the_command := v_filename||' Control=c:\control'||'.ctl userid='||Con_Info; -- Change This According To The Path
host(the_command);
Exception When Others Then
Message('Error'||' '||sqlerrm);
Message('Error'||' '||sqlerrm);
End;
If u have any problems please contact me on [email protected]
furnish the details properly .
-
How i can write a plug in for ai cs6 in c# for import/export of web type document
can i write a plug in c#(or any other language) for import/export a screen of the adobe illustrator cs6 in html (or any other format) if document of web type.
If I understand you correctly, yes, you could write a plugin that imported an HTML file into Illustrator. You could also write one that exported to HTML. I'm not sure how easy it would be, and you won't find any HTML parsing help in the Illustrator SDK, but it's quite easy to create artwork with the SDK.
-
How to caluculate buffer size for import/exports in oracle
Hi DBAS,
how to caluculate buffer size for import exports,here is the formula but how can we use if there is a 100 of tables and datatypes,is the any query to find out rows_in_array ,maximum_row_size total schema and datbase
buffer_size = rows_in_array maximum_row_size*
Thanks,
tmadugulahttp://download.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm
Search "buffer"
Maybe you are looking for
-
"events" is missing from iPhoto source list / left-hand menu
The "events" menu option is suddenly missing from the left-hand side menu of my iPhoto library. See screenshot: Photos, Faces, Places, but no Events! It used to be there and now it's not, not sure what happened. When I open a different iPhoto libr
-
Display drilling path at granular level of report title in BAM 11g
Is it possible to show drilling path at report title location at the granular level of drill-down?consider that i have a report zone wise distribution of total price in a barchart.Once i click on say east zone it will show office wise distribution on
-
Not able to use collection multiple times in a jsp using logic:iterate
I have following question: I am working on a report using J2EE. I have a collection(resultset) which has 3 different types of vendors information along with other information in the collection and I want to put them into 3 different sections on my re
-
I downloaded bootcamp, but can't get boot camp assistant to open. I need some help. Could I call somebody? Just leave phone number? Thanks
-
HT1449 i have a new lap top and need to move my itunes lib
i have a new laptop how do i move my itunes liberery over