Import filename as YYYYMMDDHHMMSS_x
Is there a method to create files with such a filename at import time? I have been using this naming scheme for years and do not wish to abandon it in order to use Aperture.
You can get close. Closest I could do was YYYYMMDDHH-MM-SS_<counter>
So you have 2 extra hyphens.
Just create a custom option (when you try the import, there is an "image name" format, click it and at the bottom is "edit" where you can choose to create a new one).
So (image year)(image month)(image day)(image time)_(counter) will give what I noted above, or if you don't mind more hyphens just do (image date)(image time)_counter and you're good to go.
Similar Messages
-
Why is "-2" appended to imported filenames?
When I import picture files to LR 5.2 in OS X 10.8.5, almost always, "-2" is appended to file names.
Sometimes I find files in my LR catalog twice, once with the original name, and once with "-2" appended.
I've tried tracing it different importing workflows, but so far I haven't been able to isolate the perpetrator.
Here are some of my importing workflows:
* USB cable from camera to Mac
* USB cable from card reader to Mac
With the source device connected to Mac, sometimes I open it in one of these:
- Image Capture
- LR 5.2
- iPhoto
Sometimes Image Capture, LR, or iPhoto is set to automatically recognize the attached picture source device, sometimes they are set to require manual opening.
Sometimes I create a desktop folder with the name it would have when LR imports it, sometimes the folder is a generic name.
Sometimes I move the folder with the destination LR to the final location in the directory tree, using OS X, before importing the files to the folder.
Sometimes I import files into the folder using one of the above applications, then move the folder to its final location.
Sometimes I transfer files into the folder using the OS X Finder, then move the folder to its final location.
Sometimes I import files into the folder that's already been put in its final location.
Sometimes two, or all three, of LR and iPhoto and Finde,r are all looking at the source files at the same time, when the computer is connected to the camera or to the card reader.
I haven't tested all of these methods yet, so it's not clear which of these methods might be the cause of the "-2."
In LR, I have imports set to ignore files already imported, and to create a backup copy in a specific folder that's different from the one where the LR catalog is located.
Do any users on the forum have this same issue? Which one or more of the impot methods is the cause?
TIACStaack wrote:
LR puts a -2 behind a filename if this name already exists in the folder.
Maybe you use renaming when importing and managed to customize this in a way that always leads to the same filename.
Thanks for your reply.
I'll take another look. I'll try a test and not import files into the catalog from within folders located in the OS X directory tree, where I want them to be in the catalog's directory tree. I guess this could be called "import in place."
One reason I am trying to develop a workflow that's not LR's automatic import workflow, is that LR duplicates folders as subfolders within the directory tree, when it makes the folders for the import. I've been trying to avoid this. My camera is set to make a new folder for each day. Would this confuse LR?
I don't rename files when importing.
I'll report back when I have some results. -
How to import Filenames and File creation Date into Table..
Hi Folks,
I am importing Differennt Excels Files into table. my require ment is after importing completed I need to insert all these Filenames ,File creation date into table. (for Auditing).
Can you please give me any ideas or reference link. Thanks In Advance.Hi Folks,
I am importing Differennt Excels Files into table. my require ment is after importing completed I need to insert all these Filenames ,File creation date into table. (for Auditing).
Can you please give me any ideas or reference link. Thanks In Advance.
You can also prepare dir command and then exeucte it by using XP_CMDSHELL. This gives you file name, modified date, creation date information.
Please refer:
https://sqljourney.wordpress.com/2010/06/08/get-list-of-files-from-a-windows-directory-to-sql-server/
https://hernandezpaul.wordpress.com/2013/02/15/store-file-names-and-modified-dates-in-a-table-without-a-foreach-loop-task-sql-server-ssis/
Cheers,
Vaibhav Chaudhari
[MCP],
[MCTS], [MCSA-SQL2012] -
Import filenames & tags into spreadsheet
Hallo,
I have the following problem: I have many perfectly tagged files and folders on an external drive. I now want to create a list/ (excel) spreadsheet of all those files so I have an overview of what is on that external device when it is not connected to my MacBook. I think the easiest way to do so is changing dictionary to the external device in terminal and then use ls command. So now I have a nice list of all Files and folders. What I don't have and what is apparently not possible to get through terminal ist a list of all files and folders with all the assigned tags.
Any way to do this?
Kind regards
PatrickThat's probably because you, like me, are used to the stupid ways that Windows does things. Which means, things that should be simple are always difficult. It's hard sometimes for my brain to transition to the, "well Windows was hard so Mac is easier but not THAT much easier mode and ..." well things like this.
I also noticed that if you high lite several files and paste them into a non "text" file it will actually copy the -- contents -- of the files into the document even though you haven't opened up the files. This is cool too. -
Unable to import from tape under Win2000
A DBA running Oracle on Solaris used export to create a tape for
me to import into my Win2000 Oracle DB. I have not been able to
figure out what to set the import filename to in order to have
imp read off the tape drive. The other DBA suggested setting the
file parameter equal to the mount point of the tape, but I'm not
sure what that is. I tried \\.\Tape0 but that didn't work. I
have also tried to use NTBackup to read the file off tape first
but it doesn't recognize the format. Does anyone have any
suggestions on how I get get the data off of this tape?
ThanksBrad,
There are a number of formats that the tape could have been
written to in, the most prominent formats being tar and cpio
I'd ask the Solaris DBA about the format he'd used.
You may want to get a version of the Unix shell(s) and utility
running under Win2000. There's probably more than one source
for these beasts. The one I'm using is called the MKS toolkit
(see www.mks.com), and it works quite nicely with the SCSCI-based
tapes I've been using sofar. It's not exactly cheap, though.
If this is a one-time shot for you, and if you're not under
heavy stress to get it done by yesterday, you could probably
find some shareware tools that will work for you, too.
Hope that helps.
All the best
Michael Istinger -
hello friends,
I am currently using the function module WS_FILENAME_GET for the user to select the file.
now what this function module return is the complete path, now i want only the filename and not the whole path, also the user will be choosing files from different folders and drives all the time so the path is not pre defined .
can any1 help me in getting only the filename from the whole path ?????hi ,
here is a chance to give the filename separately ,
and path separately check this example,
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = 'test.txt'
DEF_PATH = 'C:\MSOFFICE\EXCEL\EXAMPLES'
MASK = ',.,..'
MODE = 'O'
TITLE = TEXT-F4F
IMPORTING
FILENAME = FILE
EXCEPTIONS
INV_WINSYS = 01
NO_BATCH = 02
SELECTION_CANCEL = 03
SELECTION_ERROR = 04.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
reward points if useful,
venkat. -
Pass parameter through standard page "import xml content and actions"
Dear Portal experts,
As you know, a standard portal page is configured to allow the import of XML file. It is located in the portal in the path system admin -> transport -> xml content and actions -> import
I configured a quick link u201Cimportu201D to the page so now the link http://myserver:port/irj/portal/import allows me to access directly to this screen.
What I would like to do now is to pass the parameter related to u201Cfile nameu201D through this screen meaning that I would like that http://myserver:port/irj/portal/ import/filename=C:\test.xml fills automatically the fields u201CXML fileu201D with C:\test.xml
Please do you know how to achieve this ?
Thank you very much and regardshi,
@Maksim :
When user launch an URL like http://myserver:port/irj/portal/ import/*filename=C:\test.xml, he is requested to provide username and password; as this link is a shortcut for the upload xml page, there is a check of authorization and only portal admin that have authorization and permission on this page/iview will be able to upload xml file through the URL. Hope this clarify.
@Kumar :
thank you for your answer. What a pity to not be able to pass parameter through standard portal page/iview particularly knowing that we can pass paramater through many kinds of iviews (transactional iview, url iview, VC iview...). I explored some option on file com.sap.portal.ivs.init.par but this was unsuccessful. However, thanks to this [link bellow|http://wiki.sdn.sap.com/wiki/display/Snippets/ComponenttouploadXMLfilewithPCD+objects], I was able to upload through URL the XML file.
The problem is that I can upload only XML file that are stored in the server not in the local user computer. My requirement is to be able to upload local XML file stored on user's computer.
If someone could provide and idea/solution, I would be very grateful.
Cheers -
Is import & export working in ECC version?
i had one program. In which Export and Import is not working
properly in ECC 6.0 version where as 4.6C working fine.
If i commented the Import & Export than only it is working fine. Is there any other procedure OR how to use
import and export in ECC version. Please advise me it is very
urgent.
Edited by: jagan ravula on Jan 29, 2008 8:00 AMHi,
To import from txt, look this:
REPORT ZTXTTOTABLE .
DATA: p_file TYPE string value 'C:\teste.txt',
BEGIN OF TI_table OCCURS 0,
COD(5) TYPE C,
NAME(40),
END OF TI_table,
a(2).
PARAMETERS: sel_file(128) TYPE c
default 'C:\teste.txt' OBLIGATORY LOWER CASE.
p_file = sel_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
TABLES
data_tab = ti_table[].
format color COL_TOTAL INTENSIFIED ON.
loop at ti_table.
write: / sy-vline, ti_table-cod, at 10 sy-vline, ti_table-name,
at 60 sy-vline.
endloop.
write: / sy-uline(60).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
top-of-page.
format color COL_HEADING INTENSIFIED ON.
uline (60).
write: / sy-vline, 'COD', at 10 sy-vline, 'NAME', at 60 sy-vline.
write: / sy-uline(60).
to export to txt try it:
*& Report ZTABLETOTXT *
REPORT ZTABLETOTXT .
TABLES: spfli.
DATA: ti_spfli LIKE STANDARD TABLE OF spfli WITH HEADER LINE,
p_file TYPE string value 'C:\spfli.txt'.
PARAMETERS: sel_file(128) TYPE c
default 'C:\spfli.txt' OBLIGATORY LOWER CASE.
SELECT * FROM spfli INTO TABLE ti_spfli.
p_file = sel_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = p_file
TABLES
DATA_TAB = ti_spfli[].
IF SY-SUBRC = 0.
MESSAGE I398(00) WITH 'Arquivo criado com sucesso!'.
else.
MESSAGE E398(00) WITH 'Ocorreu um erro!'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
go through these links
exporting internal table to memory variable
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/export01.htm
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
Fm Converting Fax Id Number to Filename
Hi,
I am using FM RSPO_NUMBER_TO_FILENAME to take my spool no. as exporting parameter and importing filename. My spool no. is filled from the close_form. Spool Id is generated in close_form and passing it to above Fm and getting filename and saving that file in unix directory.
Similarly, now my output type is Fax and i got faxid from Close_form and looking for FM to take it as exporting parmeter and gives the filename, so that i can save in unix directory.
Thanks in advanceI figured it out. Fax ID number must 1st be typed in "Telephones" tab for Active Directory and then you have to copy and paste it into the Fax ID field for Unity. If you try and type the number in Unity you will get errors re: illegal carachter (spaces, -) Don't know why.
Chet -
Flash CS5.5 unable to import sounds and massive animation lag
So, having reached a point where I want to add sound to my animation (which is extremely laggy for no particular reason), I find myself completely unable to import sounds of any form into Flash. "Oh, crap" I say to myself, and come onto the forums looking for a solution. Apparently importing the sound into a sound editor (ie audition) and then resaving it works, except it hasn't in my case and I'm still stuck with this stupid "Couldn't import [filename]" error.
(and my animation is extremely laggy for some reason in case you hadn't realised from the hints above. Does this have something to do with the fact that I am using blurs in the animation and then animating them with tweens, or is flash cs5.5 (and 5) just not good at rendering blurs efficiently?)In Flash, all of the animation is done at runtime, not during authoring. This means that a blur, for instance, is done when the user is looking at the movie. This is completely different from the way that video is played on a computer. All of the animation workload is on the user's processor.
If you have a normal bitmap image that you are blurring with a blur filter and then animating that bitmap on the timeline in a tween, then you are giving the processor a lot of work to do. If you import a blurred bitmap and animate that, the processor has much less work to do.
That may or may not describe the problem that you are seeing.
I have no idea what the problem is with the sound files. Can you post one of the sound files so that someone could take a look at it? -
FYI: iPhoto not as smart as Finder regarding filenames
I have a folder of 56 tiff files.
I would like to import these files into iPhoto.
I used File>Import to Library and pointed to the folder of tiff files. 17 files are imported.
I've tried this twice, once with my "main" iPhoto Library, once creating a separate library. Both times the same 17 files are imported.
I can use Preview to view all 56 files.
I've compared the "Get Info" for a successful file and a failed file and can see no difference.
I've tried dragging one tiff file into iPhoto and get the message: "Unreadable File"
I have plenty of disk space available (150+ GB). The folder of files is 56 MB.
While writing this query I discovered the "problem." My filenames have periods in them. Remove the periods and the files successfully import into iPhoto. I can do what I want to do, with minimal effort.
So, no longer a question, but a FYI in case anyone else runs into this problem. iPhoto import filenames are more restrictive than those allowed in Finder. My husband says this is a "bug"
Thanks,
Linda in MASorry but I can't confirm this behaviour.
I can import both jpegs and tiffs to iPhoto with periods in the Filename.
I renamed a file as follows:
DSC.5305.(1).jpg
I can easily drag it to the iPhoto Window and import.
I converted it to tiff (using Preview)
DSC.5305.(1).tiff
And again, I could drag and drop it to iPhoto with no issue.
I can also import both files using the File -> Import command.
I would caution that as the period is used to separate the file suffix from the file name it's generally not a good idea to use them in File names. Similarly, symbols like ~ and / have meanings to your Mac that can cause confusion and are best avoided in Filenames.
Regards
TD -
BAPI to update Forecast values? (important, asap)
Hi,
Is a BAPI available to update forecast values?
This is very important and needed asap.
Points will be rewarded and answers will be highly appreciated.
Thanks,
JohnI think there is no BAPI or FM to update forecase values,i did bdc for this ,
See the below program ,i used MD61 transaction.
Report : ZMPPC015
Type : Data upload
Author : Seshu Maramreddy
Date : 05/26/2005
Transport : DV3K920025
Transaction: ??
Description: This ABAP/4 Program to Create Planned Independent
Requirement for SMI plants using MD61 Transaction.
It accepts tab-delimited spreadsheet input and
creates BDC sessions.
report zmppc015 no standard page heading
line-size 120
line-count 55
message-id zz.
Constants
constants : c_x type c value 'X'," Dynbegin
c_tcode type tstc-tcode value 'MD61'." Transaction Code
Variables
data : v_lines_in_xcel like sy-tabix,
l_tabix like sy-tabix,
v_trans_in_ssn type i,
v_ssnnr(4) type n," Counter
v_ssnname like apqi-groupid,
v_matnr(18) type c. " Material Number
Internal Tables
Internal table for file
data : begin of t_file occurs 0,
matnr(18) type c, " Material Number
berid(10) type c, " MRP Area
PLNMG01(17) type n, " Forecast Month -01
PLNMG02(17) type n, " Forecast Month -02
PLNMG03(17) type n, " Forecast Month -03
PLNMG04(17) type n, " Forecast Month -04
PLNMG05(17) type n, " Forecast Month -05
PLNMG06(17) type n, " Forecast Month -06
PLNMG07(17) type n, " Forecast Month -07
PLNMG08(17) type n, " Forecast Month -08
PLNMG09(17) type n, " Forecast Month -09
PLNMG10(17) type n, " Forecast Month -10
PLNMG11(17) type n, " Forecast Month -11
PLNMG12(17) type n, " Forecast Month -12
WERKS(4) TYPE C, " Plant
end of t_file.
Internal table for BDCDATA Structure
data : begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data : end of itab_bdc_tab.
Selection-screen
selection-screen: skip 3.
selection-screen: begin of block id1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPIRCT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default c_x,
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen : skip 1.
Requirement type
parameters : p_bedae like t459u-bedae,
From Date
p_date like sy-datum default sy-datum obligatory.
selection-screen: end of block id1.
at selection-screen on value-request for p_name.
F4 value for Input file
perform filename_get.
main processing
start-of-selection.
To get the data from file to Internal table
perform getdata_fromfile.
loop at t_file.
hang on to xcel line num
l_tabix = sy-tabix.
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
clear t_file.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
*& Form filename_get
F4 Value for input file
FORM filename_get.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_PATH = 'C:\Temp\ '
MASK = ',.,..'
MODE = 'O'
TITLE = 'Select File '(007)
IMPORTING
FILENAME = p_name
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " filename_get
*& Form getdata_fromfile
Upload the data from file to Internal table
FORM getdata_fromfile.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = p_name
FILETYPE = 'DAT'
TABLES
DATA_TAB = t_file
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
if sy-subrc eq 0.
sort t_file by matnr .
delete t_file where matnr = ''.
clear v_lines_in_xcel.
describe table t_file lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
write:/ 'Error reading input file'.
stop.
endif.
ENDFORM. " getdata_fromfile
*& Form bdc_session_open
BDC_OPEN_GROUP
FORM bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = v_ssnname
KEEP = p_keep
USER = p_uname
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " bdc_session_open
*& Form bdc_build_script
BDC Script
FORM bdc_build_script.
Local Variables
DATA : l_frdat(8) type c, " From Date
l_todat(8) type c, " To Date
l_frdat1(4) type c, " Year
l_frdat2(2) type c, " Month
l_frdat3(2) type c, " Day
l_tdate like sy-datum, " Subtract date(1)
l_todat1(4) type c, " Year
l_todat2(2) type c, " Month
l_todat3(3) type c. " Day
Get the material number from tables ZMSMI_FERR_RAW,
ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
perform get_matnr.
Screen 0100.
perform bdc_screen using 'SAPMM60X' '0100'.
perform bdc_field using 'BDC_OKCODE' '/EBDPT'.
perform bdc_field using 'AM60X-MATAW' 'X'.
perform bdc_field using 'AM60X-MATNR' T_FILE-MATNR.
perform bdc_field using 'AM60X-PRGRP' SPACE.
perform bdc_field using 'AM60X-PBDNR' SPACE.
perform bdc_field using 'RM60X-BERID' T_FILE-BERID.
perform bdc_field using 'AM60X-WERKS' SPACE.
perform bdc_field using 'RM60X-VERSB' '00'.
Converted the date as per MD61 Transaction.
From date
l_frdat1 = p_date+0(4).
l_frdat2 = p_date+4(2).
l_frdat3 = p_date+6(2).
concatenate l_frdat2 l_frdat3 l_frdat1 into l_frdat.
To Date
l_tdate = p_date - 1.
l_todat1 = l_tdate+0(4) + 1.
l_todat2 = l_tdate+4(2).
l_todat3 = l_tdate+6(2).
concatenate l_todat2 l_todat3 l_todat1 into l_todat.
perform bdc_field using 'RM60X-DATVE' l_frdat.
perform bdc_field using 'RM60X-DATBE' l_todat.
perform bdc_field using 'RM60X-ENTLU' 'M'.
Screen 0127
perform bdc_screen using 'SAPMM60X' '0127'.
perform bdc_field using 'BDC_OKCODE' '=WEIT'.
if p_bedae is initial.
perform bdc_field using 'T459U-BEDAE' space.
else.
perform bdc_field using 'T459U-BEDAE' P_BEDAE.
endif.
Screen 0100.
perform bdc_screen using 'SAPMM60X' '0100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'AM60X-MATAW' 'X'.
perform bdc_field using 'AM60X-MATNR' T_FILE-MATNR.
perform bdc_field using 'AM60X-PRGRP' SPACE.
perform bdc_field using 'AM60X-PBDNR' SPACE.
perform bdc_field using 'RM60X-BERID' T_FILE-BERID.
perform bdc_field using 'AM60X-WERKS' SPACE.
perform bdc_field using 'RM60X-VERSB' '00'.
perform bdc_field using 'RM60X-DATVE' l_frdat.
perform bdc_field using 'RM60X-DATBE' l_todat.
perform bdc_field using 'RM60X-ENTLU' 'M'.
Screen 0200
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG01.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG02.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG03.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG04.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG05.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG06.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG07.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG08.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG09.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG10.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG11.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=SICH'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG12.
ENDFORM. " bdc_build_script
*& Form get_matnr
Get the material number from tables ZMSMI_FERR_RAW,
ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
FORM get_matnr.
clear v_matnr.
case t_file-werks.
when '0101'.
select single cmatnr from zmsmi_simp_raw
into v_matnr where matnr = t_file-matnr.
if sy-subrc eq 0.
clear t_file-matnr.
t_file-matnr = v_matnr.
endif.
when '0103'.
select single cmatnr from zmsmi_ferr_raw
into v_matnr where matnr = t_file-matnr.
if sy-subrc eq 0.
clear t_file-matnr.
t_file-matnr = v_matnr.
endif.
when '0102' or '0110' or '0111' or '0112' or '0113'
or '0114' or '0115' or '0116' or '0117'.
select single cmatnr from zmsmi_snap_raw
into v_matnr where matnr = t_file-matnr.
if sy-subrc eq 0.
clear t_file-matnr.
t_file-matnr = v_matnr.
endif.
endcase.
ENDFORM. " get_matnr
*& Form bdc_screen
BDC Script for Screen fields
-->P_PROG Program name
-->P_SCRN Screen Number
FORM bdc_screen USING p_prog
p_scrn.
clear itab_bdc_tab.
itab_bdc_tab-program = p_prog.
itab_bdc_tab-dynpro = p_scrn.
itab_bdc_tab-dynbegin = c_x.
append itab_bdc_tab.
ENDFORM. " bdc_screen
*& Form bdc_field
BDC Script for Screen fileds
-->P_NAM Field name
-->P_VAL Field value
FORM bdc_field USING p_nam
p_val.
clear itab_bdc_tab.
itab_bdc_tab-fnam = p_nam.
itab_bdc_tab-fval = p_val.
append itab_bdc_tab.
ENDFORM. " bdc_screen
*& Form bdc_submit_transaction
BDC_INSERT Function Module
FORM bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
EXPORTING
tcode = c_tcode
TABLES
dynprotab = itab_bdc_tab
EXCEPTIONS
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh itab_bdc_tab.
ENDFORM. " bdc_submit_transaction
*& Form bdc_session_close
text
FORM bdc_session_close.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
ENDFORM. " bdc_session_close
Reward Points if it is helpful
Thanks
Seshu -
Hi,
I need to append the long text in the sales order, for that i am going to use SAVE_TEXT function module. Can i directly append the text for the existed text of the sales order - or do i need to pull the long text through READ_TEXT function module for that sales order & append the new text ?
What are the important parameters i need to pass SAVE_TEXT function module to append the text for the sales order.
regards
Jayait create the text - if no text available in system - it simply inserts the text.
it append the text - if text is avialbel in system then it append the text in next line of text onwards.
if you want to create new text entirely ,if already text is available ,first delete the text ( using DELETE_TEXT ) ,then use save_TEXT FM.
Here is the simple example -> here i am deleting old text and re enter new text.
report ZMPPC016
no standard page heading
line-size 120.
Constants
constants : c_r type c value 'R', " PLNTY Value
C_X TYPE C VALUE 'X', " Value for dynbegin.
c_tcode like tstc-tcode value 'CA22', " Transaction code
c_mode(1) type c value 'A', " BDC Mode
c_tdformat type tline-tdformat value '*',"Tag column
c_tdid type thead-tdid value 'PLPO', " Text ID
c_tdform type thead-tdform value 'SYSTEM'." Form name
Variables
data : v_date like sy-datum, " date
v_date1(4) type c,
v_date2(2) type c,
v_date3(2) type c,
TNAME LIKE THEAD-TDNAME,
v_mandt(3) type c,
v_matnr(18) type c,
flag type c.
Internal table for file
data : begin of t_file occurs 0,
matnr(18) type c, " Material Number
werks(4) type c, " Plant
vornr(4) type c, " Operation Number
tseq(3) type n, " Line number in the long text
text1(70) type c, " Long text
plnal(2) type n, " Group counter
end of t_file.
data : begin of t_text occurs 0,
matnr(18) type c, " Material Number
werks(4) type c, " Plant
plnal(2) type n, " Group counter
vornr(4) type c, " Operation Number
tseq(3) type n, " Line number in the long text
text1(70) type c, " Long text
end of t_text.
Internal table for MAPl
data : begin of t_mapl occurs 0,
plnnr like mapl-plnnr,
end of t_mapl.
Internal Table for PLAS and PLPO Table
data : begin of t_plpo occurs 0,
mandt like plpo-mandt,
plnty like plpo-plnty,
plnnr like plpo-plnnr,
plnkn like plpo-plnkn,
zaehl like plpo-zaehl,
end of t_plpo.
data t_long like tline occurs 0 with header line.
Work area for t_text Internal table
data : wa_text like t_text.
data: t_header like thead. " long text
Internal table for BDCDATA Structure
data : begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data : end of itab_bdc_tab.
Selection-screen
selection-screen : begin of block blk with frame .
parameter : P_file like rlgrap-filename obligatory.
selection-screen : end of block blk.
initialization.
p_file = 'C:\My Documents\InputFile.txt'.
at selection-screen on value-request for p_file.
F4 value for file
perform file_get.
start-of-selection.
Get file data into Internal Table.
perform get_data.
sort t_text by matnr werks vornr plnal tseq.
Save the long text into CA22 Transaction
perform load_data.
top-of-page.
CALL FUNCTION 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
skip 1.
*& Form file_get
F4 Value for file
FORM file_get.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_PATH = 'C:\Temp\'
MASK = ',.,..'
MODE = 'O'
TITLE = 'Select File'(007)
IMPORTING
FILENAME = P_file
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " file_get
*& Form get_data
Get file data into Internal Table.
FORM get_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = p_file
FILETYPE = 'DAT'
TABLES
DATA_TAB = t_file
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
if sy-subrc eq 0.
sort t_file by matnr werks plnal vornr tseq.
delete t_file where matnr = ''.
loop at t_file.
Get the material number from tables ZMSMI_FERR_RAW,
ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
perform get_matnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_file-vornr
IMPORTING
OUTPUT = t_file-vornr.
move : t_file-matnr to t_text-matnr,
t_file-werks to t_text-werks,
t_file-vornr to t_text-vornr,
t_file-tseq to t_text-tseq,
t_file-text1 to t_text-text1,
t_file-plnal to t_text-plnal.
append t_text.
clear t_text.
endloop.
else.
WRITE: / 'Error reading input file'.
stop.
endif.
ENDFORM. " get_data
*& Form call_bdc
BDC Script for CA22 Transaction
FORM call_bdc.
Screen 1010
perform bdc_screen using 'SAPLCPDI' '1010'.
perform bdc_field using 'BDC_OKCODE' '=VOUE'.
perform bdc_field using 'RC27M-MATNR' SPACE.
perform bdc_field using 'RC27M-WERKS' SPACE.
perform bdc_field using 'RC271-VBELN' SPACE.
perform bdc_field using 'RC271-POSNR' SPACE.
perform bdc_field using 'RC271-PLNNR' T_PLPO-PLNNR.
perform bdc_field using 'RC271-AENNR' SPACE.
clear : v_date,
v_date1,
v_date2,
v_date3.
v_date1 = sy-datum+0(4).
v_date2 = sy-datum+4(2).
v_date3 = sy-datum+6(2).
concatenate v_date2 v_date3 v_date1 into v_date.
perform bdc_field using 'RC271-STTAG' v_date .
perform bdc_field using 'RC271-REVLV' SPACE.
perform bdc_field using 'RC271-WERKS' SPACE.
perform bdc_field using 'RC271-PLNAL' WA_TEXT-PLNAL.
perform bdc_field using 'RC271-STATU' SPACE.
perform bdc_field using 'RC271-VAGRP' SPACE.
perform bdc_field using 'RC271-PROFIDNETZ' SPACE.
Screen 5400
perform bdc_screen using 'SAPLCPDI' '5400'.
perform bdc_field using 'BDC_OKCODE' '=OSEA'.
Screen 1010
perform bdc_screen using 'SAPLCP02' '1010'.
perform bdc_field using 'BDC_OKCODE' '=ENT1'.
perform bdc_field using 'RC27H-VORNR' WA_TEXT-VORNR.
Screen 5400
perform bdc_screen using 'SAPLCPDI' '5400'.
perform bdc_field using 'BDC_OKCODE' '=LTXT'.
perform bdc_field using 'RC27X-FLG_SEL(01)' C_X.
Screen 1100
perform bdc_screen using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_OKCODE' '=XEIN'.
Screen 0999
perform bdc_screen using 'SAPLWB_CUSTOMIZING' '0999'.
perform bdc_field using 'BDC_OKCODE' '=CONT'.
PERFORM BDC_FIELD USING 'RSEUMOD-GRA_EDITOR' SPACE.
Screen 1100
perform bdc_screen using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR' 'RSTXT-TXPARGRAPH'.
perform bdc_field using 'BDC_OKCODE' '=TXBA'.
perform bdc_field using 'RSTXT-TXPARGRAPH(03)' '*'.
perform bdc_field using 'RSTXT-TXLINE(03)'
Screen 5400
perform bdc_screen using 'SAPLCPDI' '5400'.
perform bdc_field using 'BDC_OKCODE' '=BU'.
call transaction c_tcode
using itab_bdc_tab mode 'N'
update 'S'.
refresh itab_bdc_tab.
if sy-subrc eq 0 and sy-msgty ne 'E'.
v_mandt = t_plpo-mandt.
CONCATENATE v_mandt
t_plpo-plnty
t_plpo-plnnr
t_plpo-plnkn
t_plpo-zaehl into tname.
commit work.
CALL FUNCTION 'DELETE_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = c_tdid
LANGUAGE = 'E'
NAME = TNAME
OBJECT = 'ROUTING'
SAVEMODE_DIRECT = 'X'
TEXTMEMORY_ONLY = ' '
LOCAL_CAT = ' '
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
if sy-subrc ne 0.
write:/3 wa_text-matnr,24 wa_text-werks,
30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
60 ' -',
67 'Error Deleting Existing Long Text'.
endif.
else.
write:/3 wa_text-matnr,24 wa_text-werks,
30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
60 ' -',
67 'Error Executing BDC'.
endif.
ENDFORM. " call_bdc
*& Form bdc_screen
BDC Script for Screen fields
-->P_PROG Program name
-->P_SCRN Screen Number
FORM bdc_screen USING p_prog
p_scrn.
clear itab_bdc_tab.
itab_bdc_tab-program = p_prog.
itab_bdc_tab-dynpro = p_scrn.
itab_bdc_tab-dynbegin = c_x.
append itab_bdc_tab.
ENDFORM. " bdc_screen
*& Form bdc_field
BDC Script for Screen fileds
-->P_NAM Field name
-->P_VAL Field value
FORM bdc_field USING p_nam
p_val.
clear itab_bdc_tab.
itab_bdc_tab-fnam = p_nam.
itab_bdc_tab-fval = p_val.
append itab_bdc_tab.
ENDFORM. " bdc_screen
*& Form load_data
Save the long text into CA22 Transaction
FORM load_data.
loop at t_text.
move t_text to wa_text.
at new vornr.
Read the data in MAPL Table
select single plnnr from mapl into t_mapl-plnnr
where matnr = wa_text-matnr
and werks = wa_text-werks
and plnty = c_r
and loekz = space.
if sy-subrc eq 0.
Read the data from PLAS and PLPO Table
select SINGLE a~mandt
a~plnty
a~plnnr
a~plnkn
a~zaehl into t_plpo
from plpo as a inner join plas as b on aplnty = bplnty
and aplnnr = bplnnr
and aplnkn = bplnkn
where b~plnty = c_r
and b~plnnr = t_mapl-plnnr
and b~plnal = wa_text-plnal
and b~loekz = space
and a~vornr = wa_text-vornr
and a~loekz = space.
if sy-subrc eq 0.
perform call_bdc.
else.
flag = 'X'.
write:/3 wa_text-matnr,24 wa_text-werks,
30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
60 ' -',
67 'Matching routing group\Operation not found'.
continue.
endif.
else.
flag = 'X'.
write:/3 wa_text-matnr,24 wa_text-werks,
40 ' -',
45 'Material Does not Exists or Material',
82 'not Available in MAPL Table'.
continue.
endif.
endat.
if flag ne 'X'.
t_long-tdline = wa_text-text1.
t_long-tdformat = c_tdformat.
append t_long.
endif.
at end of vornr.
if flag ne 'X'.
v_mandt = t_plpo-mandt.
CONCATENATE v_mandt
t_plpo-plnty
t_plpo-plnnr
t_plpo-plnkn
t_plpo-zaehl into tname.
T_HEADer-TDOBJECT = 'ROUTING'.
t_HEADer-TDNAME = tname.
T_HEADer-TDID = c_tdid.
t_header-tdform = c_tdform.
T_HEADer-TDSPRAS = 'E'.
Save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = t_header
SAVEMODE_DIRECT = 'X'
OWNER_SPECIFIED = ' '
LOCAL_CAT = ' '
IMPORTING
FUNCTION =
NEWHEADER =
TABLES
LINES = t_long
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
if sy-subrc eq 0.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
OBJECT = t_header-TDOBJECT
NAME = t_header-TDNAME
ID = t_header-TDID
LANGUAGE = t_header-TDSPRAS.
write:/3 wa_text-matnr,24 wa_text-werks,
30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
60 ' -',
67 'Long Text Loaded Successfully'.
else.
write:/3 wa_text-matnr,24 wa_text-werks,
30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
60 ' -',
67 'Error Uploading Long Text'.
endif.
refresh t_long.
else.
write:/3 wa_text-matnr, 24 wa_text-werks,
45 'Long text not uploaded'.
clear flag.
endif.
endat.
endloop.
ENDFORM. " load_data
*& Form get_matnr
Get the material number from tables ZMSMI_FERR_RAW,
FORM get_matnr.
clear v_matnr.
case t_file-werks.
when '0101'.
select single cmatnr from zmsmi_simp_raw
into v_matnr where matnr = t_file-matnr.
if sy-subrc eq 0.
if not v_matnr is initial.
clear t_file-matnr.
t_file-matnr = v_matnr.
endif.
when '0103'.
select single cmatnr from zmsmi_ferr_raw
into v_matnr where matnr = t_file-matnr.
if sy-subrc eq 0.
if not v_matnr is initial.
clear t_file-matnr.
t_file-matnr = v_matnr.
endif.
when '0102' or '0110' or '0111' or '0112' or '0113'
or '0114' or '0115' or '0116' or '0117'.
select single cmatnr from zmsmi_snap_raw
into v_matnr where matnr = t_file-matnr.
if sy-subrc eq 0.
if not v_matnr is initial.
clear t_file-matnr.
t_file-matnr = v_matnr.
endif.
endcase.
ENDFORM. " get_matnr
Thanks
Seshu -
Issues with XML Content and Actions to import RRA in FPN (EP7 SPS13)
Hi,
I am having trouble using the import functionality of XML Content and Actions to transport Remote Role Assignments between Consumer Portals. Whenever I want to upload an XML file containing RRA for Roles and Groups that were already assigned to eachother, the import fails and nothing is updated. The error I get:
UMException. Data could not commit to Role: gp:/[full ID of portal role]
Anyone with experience in how to use this?
Kind regards,
Christian Staalbyhi,
@Maksim :
When user launch an URL like http://myserver:port/irj/portal/ import/*filename=C:\test.xml, he is requested to provide username and password; as this link is a shortcut for the upload xml page, there is a check of authorization and only portal admin that have authorization and permission on this page/iview will be able to upload xml file through the URL. Hope this clarify.
@Kumar :
thank you for your answer. What a pity to not be able to pass parameter through standard portal page/iview particularly knowing that we can pass paramater through many kinds of iviews (transactional iview, url iview, VC iview...). I explored some option on file com.sap.portal.ivs.init.par but this was unsuccessful. However, thanks to this [link bellow|http://wiki.sdn.sap.com/wiki/display/Snippets/ComponenttouploadXMLfilewithPCD+objects], I was able to upload through URL the XML file.
The problem is that I can upload only XML file that are stored in the server not in the local user computer. My requirement is to be able to upload local XML file stored on user's computer.
If someone could provide and idea/solution, I would be very grateful.
Cheers -
hi,
I have a parameter filename in the selection screen. is there a way where i can ensure that user doesnt enter any special characters in the file name?
thanks in advance.
NehaUse this function to allow user to select a file name from the system.
Consider p_file is the name of the parameter.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = space
def_path = space
mask = ',.,..'
mode = space
title = space
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
Maybe you are looking for
-
Uploading images whit thumbnail to MDM repository using Java API
Hello, can someone tell me how to upload images whit thumbnail to MDM repository using Java API? i get following message using setHasThumbnail(true): com.sap.mdm.commands.CommandException: com.sap.mdm.internal.protocol.manual.ServerException: Ungülti
-
Hi I've used the HTML Editor to store an article into a table. I use the HTML Editor and add headertext etc, different fontsizes and so on. However, when I present this article as a result, the themes default style override the formatting made in the
-
Mountain Lion problems with Adobe?
Since changing to Mountain Lion I cannot import jpeg and RAW files into Lightroom4. Anyone else had the same issues? Adobe is not very helpful, but many people have reported similar problems with Lightroom4 and CS4.
-
Re-install all web server components?
Hi all, I would like to completely uninstall apache and php and reinstall it all to default settings, deleting all configuration files along with any installed modules. Anyone know a way of doing this, I just want to start a fresh? Thank you, Jamie
-
Hi, I am getting DMV error 037 Microsoft SQL Server database connection exception: com.microsoft.jdbc.sqlserver.sqlserverdriver when i am trying ( java -jar dmv\dmv.jar D:\dmv\config\dbInfoss2k.prop d:\dmv\dmvreport.txt ) my classpath is JDBC.ClassPa