Import Interval node hierarchies from BW to BPCNW7.5

Hi expert,
I have a requirement of importing hierachies into BPC. However the source infoobject has interval nodes in the hierarchies and the interval nodes has the property "Infoobject" as "0HIER_NODE" rather than infoobejct itself. I saw the document on How to import master data and Hierarchies from BW to BPC, but this document talk about importing hierarchies whose leaf nodes are not interval nodes.
Appreciate on any inputs.
Thanks,
Vamsi
Edited by: vamsi nagaraju on Aug 9, 2011 7:15 PM

Hi Vamsi,
Values assigned to 0HIER_NODE(as infoobject) are text nodes.
They are transferred as part of master data(attributes) when you follow the how-to-guide for master data in 7.5.
Below is the link for how-to-guide. Select the Hierarchy or Attributes selection in set selection tab while loading master
data so that all the text nodes from Hierarchy table for the selected hierarchy will be loaded to BPC.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c02d0b47-3e54-2d10-0eb7-d722b633b72e
-Kalyan.

Similar Messages

Error when importing CO Hierarchies from R/3 DEV to R/3 QAS

Dear SDN,
I am getting the following error when importing Cost center and cost element hierarchies from R/3 DEV to R/3 QAS...
Object OSOA 0COSTCENTER_0101_HIER has not yet been imported successfully
Object OSOA 0COSTELMNT_0102_HIER has not yet been imported successfully
Ended with Return code ===8...
But The two hierarchies were available in R/3 QAS and also i am able to utilise..
My doubt is if i transport these hierarchies from R/3 QAS to R/3 Production any major issues...
Now i want to test a data in BW DEV from R/3 Production data...
So, I am planning to transport These hierarchies from R/3 QAS to R/3 PROD...
Here we do not have BW QAS...So, getting data from R/3Production to BW DEV and testing...
After testing Directly use in BW Production...
So, Please suggest me why when importing these hierarchies errors occuring???
Help will be greatly appreciated with points...
Thanks in advance...

Hi Venkat,
Please go through the following threads...
Hierarchy Transports
Transporting cost center and profit center standard hierarchies
/community [original link is broken]://Transporting a hierarchy
Transport Hierarchy
Khaja

Automating "Available hierarchies from OLTP"

Hi Gurus !!!
I would like to automate the importing of hierarchies from R/3 via ABAP !!! Is it possible? More clearly: I want to do da same of button "Available hierarchies from OLTP" do when we click on it within the InfoPackage !!
Who will save my skin?!?! :-D !!
Regards

Which infoobject
I normally see this in CO hierarchies where the hierarchy which is not desginated as a top node hierarchy is not available on the OLTP list (correctly!)

How do I get the Interval to keep from repeating after it's used once?

How do I get the Interval to keep from repeating after it's used once? Because I tried clearInterval but I couldn't get it working.
When my code looks like this, with ClearInterval, it refuses to execute my action, which is to change scenes after a short interval:
(Pardon if there is some formating errors, I had to reformat it for the Internet)
Code with clearInterval command
stop();
Kollektiv.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_2);
function fl_ClickToGoToAndPlayFromFrame_2(event:MouseEvent):void{
   gotoAndPlay(29);
   var myInterval:uint = setInterval(fl_ClickToGoToNextScene_14,3000);
   clearInterval(myInterval);
function fl_ClickToGoToScene_14(event:MouseEvent):void{
    MovieClip(this.root).gotoAndPlay(1, "Testside");
However, when my code looks like this it refuses to stop looping:
Code without ClearInterval command
stop();
Kollektiv.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_2);
   function fl_ClickToGoToAndPlayFromFrame_2(event:MouseEvent):void{
   gotoAndPlay(29);
   setInterval(fl_ClickToGoToNextScene_14,3000);
function fl_ClickToGoToScene_14(event:MouseEvent):void{
    MovieClip(this.root).gotoAndPlay(1, "Testside");
Any ideas? Also, feel free to dumb your answer down, because I am completely new to Flash, Actionscript and coding.

If you insist on using setInterval - you need to declare interval id in a higher scope so that you can clear it later:
stop();
var myInterval:uint;
Kollektiv.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_2);
function fl_ClickToGoToAndPlayFromFrame_2(event:MouseEvent):void
          gotoAndPlay(29);
          myInterval = setInterval(fl_ClickToGoToNextScene_14, 3000);
function fl_ClickToGoToScene_14():void
          clearInterval(myInterval);
          MovieClip(this.root).gotoAndPlay(1, "Testside");
I suggest you use Timer instead:
stop();
import flash.events.TimerEvent;
import flash.utils.Timer;
var timer:Timer = new Timer(3000, 1);
timer.addEventListener(TimerEvent.TIMER, fl_ClickToGoToScene_14);
function fl_ClickToGoToAndPlayFromFrame_2(event:MouseEvent):void
          timer.start();
          gotoAndPlay(29);
function fl_ClickToGoToScene_14(event:TimerEvent):void
          timer.stop();
          MovieClip(this.root).gotoAndPlay(1, "Testside");

How can i import my calendar events from google calendar to ical?

how can i import my calendar events from google calendar to ical?

To set up CalDAV support for Google Calendar in Apple's iCal, follow these steps:
Open Apple iCal, go to Preferences and then the Accounts tab.
Click on the + button to add an account.
In the box that pops up, enter a description for the account and your Google Account username and password.
Under Server Options, add the following URL:
https://www.google.com/calendar/dav/[email protected]/user//www.google.com/calendar/dav/[email protected]/user
Replace '[email protected]' with the email address that you use to log in to Calendar. Make sure to include the '@domain.com' portion (which is @gmail.com for Gmail users) in this section.
DO NOT substitute your username for 'user' at the end of the URL.
Leave the Use Kerberos v5 for authentication option unchecked.
Click Add.
Under the Delegation tab, select the calendars you'd like to add to iCal by checking the boxes next to them. You may need to hit refresh to get the latest list of calendars.
Add your email address to your Address Book card by selecting Add Email. You'll be prompted to add your email address only if your address is not already in your Address Book.
You won't be able to invite or email guests to Google Calendar events within iCal if your address is not in your Address Book.
Your Google Calendar will now appear in iCal's list of calendars, and changes you make to your Google Calendar in iCal will be reflected when you sign in to Google Calendar.
Event information will automatically refresh every five minutes. You can change this interval by opening the iCal > Preferences > Accounts menu and selecting a new refresh interval under the 'Refresh calendars' drop-down. Keep in mind you can also force a refresh by selecting a calendar and pressing the Apple and R keys at the same time.
Calendars that are checked but disabled have already been added to iCal - you can remove them from within iCal.

VIStrings.Import Invoke Node now produces an error.

I am converting from LabView 2013 to 2014. Should be a painless process right? Now I get and error code 1000 from the VIStrings.Import invoke node.
Has anyone else run into this problem?
Thanks,
RB

I figured it out.
The application builder moved that vi into the startup VIs in the build specification. It was already running when I tried to invoke it.
Never mind.
RB

Loading Hierarchies from R3

Hi,
I loaded the Hierarchies from R3 in to BW with the Business Content DataSources.
In R3--> RSA3; I am finding 32 records
But when I load the data in BW, the Monitor shows 58 records .......
What are the exact steps I should take care to validate the records / records count in R3 Vs BW.
Thank you,

Well as mentioned in my previous post RSA3 works best for the non Hierarchy Datasource.
For hierarchy datasource I never found the best way to handle this scenario.
We have random check with the nodes of hierarchy in R/3 to BI after the loads which is not full proof and am aware of.
So to confirm the same,execute the standard reports in R/3 with Hierarchy nodes and Custom build reports in BW with the same Hierarchy to compare the values;however this is the crudest way.
May some one has best method for suggestion....
Hope it Helps
Chetan
@CP..

Available hierarchies from OLTP

hi,
i've used button "Available hierarchies from OLTP" in InfoPackage to load some hierarchies into the SAP BI. But the some of hierarchies i cannot find in this list.
How could i load full list of all hierarchies that is created in R3 system, cause only some of them are there now?
thanks a lot!

Which infoobject
I normally see this in CO hierarchies where the hierarchy which is not desginated as a top node hierarchy is not available on the OLTP list (correctly!)

Assigning a node value from an XML variable to a String type in Weblogic Process Integrator

Hi,
Is there any way to assign a node value from an XML variable to a String variable
in Weblogic Process Integrator...
Thanx.
Narendra.

Nerendra
Are you talking about using Xpath on the XML document and assigning to a
variable, it is unclear what you are asking
Tony
"Narendra" <[email protected]> wrote in message
news:3bba1215$[email protected]..
>
Hi,
Is there any way to assign a node value from an XML variable to a Stringvariable
in Weblogic Process Integrator...
Thanx.
Narendra.

Importing All the files from a folder at a time

Hi....
Can any body tell me how to import set of files from a folder into IDM.
It is becoming very difficult to import the files one after other....
Waiting for Reply....
Thanks in advance..........

We used an ant script to build an XML file that will contain the files. The script is configured to use the folder structure of our CVS repository.
We'd checkout our XML module and then run the build script and import the resulting init file.
Code to the script is below -- caveat emptor. You'll need to change the folder structure to suit your own environment.
<?xml version="1.0" encoding="UTF-8"?>
<project basedir="." default="all" name="MyInit">
    <target name="init">
        <property location="." name="src.dir"/>
        <property location="." name="dest.dir"/>
        <property name="project.name" value="${ant.project.name}"/>
        <property location="${dest.dir}/MyInit.xml" name="MyInit.output"/>
        <property name="source.configuration" value="${dest.dir}/configuration"/>
        <property name="source.emailTemplate" value="${dest.dir}/emailTemplate"/>
        <property name="source.forms" value="${dest.dir}/forms"/>
        <property name="source.reports" value="${dest.dir}/reports"/>
        <property name="source.resource" value="${dest.dir}/resource"/>
        <property name="source.rules" value="${dest.dir}/rules"/>
        <property name="source.workflow" value="${dest.dir}/workflow"/>
        
        <path id="configuration.path">
            <fileset dir="${source.configuration}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="cp" refid="configuration.path" />
         <path id="emailTemplate.path">
            <fileset dir="${source.emailTemplate}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="ep" refid="emailTemplate.path" />
         <path id="forms.path">
            <fileset dir="${source.forms}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="fp" refid="forms.path" />
        <path id="reports.path">
            <fileset dir="${source.reports}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rptp" refid="reports.path" />
        <path id="resource.path">
            <fileset dir="${source.resource}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rep" refid="resource.path" />
        <path id="rules.path">
            <fileset dir="${source.rules}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rp" refid="rules.path" />
        <path id="workflow.path">
            <fileset dir="${source.workflow}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="wp" refid="workflow.path" />
        
         <path id="source.path">
            <pathelement location="${src.dir}" />
         </path>
         <property name="sp" refid="source.path" />
    </target>
    <target depends="init" name="win_init">
        
        <property name="importfile.path" value="${sp}"/>
    </target>
    <target depends="init" name="make">
    
        <echo file="${MyInit.output}" append="false"><?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE Waveset PUBLIC 'waveset.dtd' 'waveset.dtd'>
<Waveset>
${cp}
${ep}
${fp}
${rptp}
${rp}
${wp}
</Waveset>
        </echo>
     
     <replace file="${MyInit.output}"
              token = "${sp}"
              value = "<ImportCommand name='include' file='${importfile.path}" />
     
     <replace file="${MyInit.output}"
              token = "${file.separator}"
              value = "/" />
    <replace file="${MyInit.output}"
              token = "${path.separator}"
              value = "${line.separator}" />
    <replace file="${MyInit.output}"
              token = ".xml"
              value = ".xml'/>" />
    </target>
    <target depends="init,win_init,clean,make" description="Build everything." name="all"/>
    <target depends="init" description="Clean all build products." name="clean">
        <delete file="${MyInit.output}"/>
    </target>
</project>

When importing an MXF file from a CF card, I can only get :30 of the original clip. What am I doing wrong?

When importing MXF video file from a CF card to Final Cut 6, I can only import :30 of it. Why am I limited to :30 and how do I get the entire clip?

That's the WRONG WAY! You have to use Log and Transfer, like Michael says. Here's A tutorial on how to deal with Tapeless in FCP
<a href=http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1 target=_blank>Tapeless Workflow for FCP 7 Tutorial</a>
BUT NOTE! If this is MXF from a CANON camera...their new 305 camera...you not only need a plugin to get it to work (they either include it with the camera, or you have to go to the website... the Canon Log and Transfer plugin), it also might only work with FCP 7. Because the camera is brand spankin new. Try the plugin first...well, if this is from that Canon camera.

After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow? Thank you, Filippo

On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo

I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks

How do i import an iPhoto library from a time machine backup?

how do i import an iPhoto library from a time machine backup? I did a back up and i formatted my machine. How do i get iphoto to be the same?

This screenshot shows how to restore a library from Time Machine.
There is NO importing necessary. One should never import one library into another. Just restore it to your Pictures folder and launch iPhoto.
OT

Passing hierachy node variable from BW to BO Webi Report in open doc link

Hello All,
We are working on BW-BO integration and creating Webi reports based on Bex queries.
The question is regarding passing of a hierachy node value from BW to BO through open doc link.
I see that when we pass hierarchy node value, we have to associate that with the corresponding infoobject technical name in the link but not sure in what format it has to be sent.
For example, if ARM is the node value and 0HIERNODE is the infoobject , how should we send this value to BO.
Please help.
Thanks for your help,
Regards,
Tangudu S

You cannot change anything here. You should really find out how the values are retrieved from the database
THere is another option:
1) Activate the tracing on your BOBJ server
Check the following SAP notes (http://service.sap.com/notes) for that:
Unix: Note 1235111
Windows: Note 1260004
2) Run your WebI report from the InfoView by choosing first the desired hierachy node value from the LOV of your prompt.
3) Extract the MDX statement from the log file. It should contain the value for the hierarchy node. Copy this to the URL
It is easier to find this out if you have access to a Crystal Reports Designer installation. Do you?
Regards,
Stratos

Re: Error in submitting Import Standard Purchase orders from Pl/Sql

Hi All,
Iam using the following code to submit a concurret program
"Import Standard Purchase orders" from pl/sql
Program is sucessfully submittted but it is Completing in error status i am stuck there please help me in resolving this
My instance R12
My Code
======
DECLARE
v_request_id VARCHAR2 (100);
BEGIN
mo_global.set_policy_context ('S', 204); --org_id for the operating unit which the purchase order records belong too
mo_global.init ('PO'); -- sets the application
FND_GLOBAL.APPS_INITIALIZE (1013436, 50578, 201); --Consists of the user_id, responsibility_id, responsibility_application_id which is 201 for purchasing
v_request_id :=
fnd_request.submit_request (application => 'PO',
program => 'POXPOPDOI',
description => NULL,
start_time => NULL, -- To start immediately
sub_request => FALSE,
argument1 => '31348', -- Buyer_ID
argument2 => 'STANDARD', -- Doc Type
argument3 => '', -- doc subtype
argument4 => 'N', -- update items
argument5 => '', -- create sourcing rules not used
argument6 => 'INCOMPLETE', -- Approval status
argument7 => '', -- release generation method
argument8 => '1021387', -- batch_id
argument9 => '', -- operating unit null
argument10 => '', -- global agreement null
argument11 => '', -- enable sourcing null
argument12 => '', -- sourcing level null
argument13 => '', -- inv org enabled null
argument14 => '' -- inv org null
DBMS_OUTPUT.put_line ('Request submitted. ID = ' || v_request_id);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line (
'Request set submission failed - unknown error: ' || SQLERRM
END;
output
=====
when i check output i am getting the follwing error
DECLARE
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at line 133
Log message
==========
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
31348
STANDARD
N
INCOMPLETE
1021387
Start of log messages from FND_FILE
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 945297
ORA-01403: no data found in Package po.plsql.PO_PDOI_PVT. Procedure init_sys_parameters.0
ORA-01403: no data found in Package po.plsql.PO_PDOI_PVT. Procedure init_startup_values.10
ORA-01403: no data found in Package po.plsql.PO_PDOI_PVT. Procedure start_process.50
User-Defined Exception in Package po.plsql.PO_PDOI_Concurrent. Procedure POXPDOI.30
End of log messages from FND_FILE
Thanks
Manoj kumar

Pass NULL instead of ''
Check the flag
SELECT multi_org_category
FROM fnd_concurrent_programs
WHERE concurrent_program_name = 'POXPOPDOI'Update it as per the below MOS Doc
R12 / POXPOPDOI - 'ORA-01422' Error While Running 'Import Standard Purchase Orders' [ID 457628.1]
Otherwise,
Follow the below doc and insert values to the interface tables (headers, lines and distribution) and run the Import Standard Purchase Orders from the front end.
How To Diagnose Problems With Importing Standard Purchase Orders [ID 781351.1]
HTH
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Import Interval node hierarchies from BW to BPCNW7.5

Similar Messages

Maybe you are looking for