Import Meta Data to Excel

I have never needed it before, but nowe it becomes very important:
I need inm Excel the clip name and the exact lenght.
Before, I just copied the lenght from the thumbnail (not accurate, because it does not show the frames) and very big strain on the eyes looking at hundereds of clips.
Now I discovered the following: import all clips into FCP 7 go to metadata and keep only Clipname and Duration visible.
I selected all and then created a batch list, which I opened and copy/paste in Excel.
I am sure, there is a more simple way to do that?
Thanks
Dorian

Thank you, but I would be using this function maybe 5-6 x a year max.
So 100 $ would be just a bit too expensive for that.
Looking for a simple solution.
Also want to mention, I need only the clip number (which I can import directly to Excel) and the duration.
Thats all.
Edit: An Internet search showed me, that you can import a batch list (which is exported directly from FCP) direct into Excel.

Similar Messages

Import Meta Data from CSV - Export Meta Data to CSV

Ability to import meta data into selected images from CSV file containing a number of fields, one of which is file name. The other fields would be selected tags to import.
Import logic would be, Where file name in column 1 matches current selected filename, then take following fields 2, 3, etc and import into Bridge.
Export selected meta data from selected files to CSV to form reverse of above to allow edit of data in Excel etc.
Further enchancement on import would be to allow instead of just filename, but date/time range matching.
Logic would be, Where date/time in column 1 is within X hours of selected
image creation date/time then import following fields into image meta data.
Useful for example if you already have a GPS tracklog in CSV and want to try and update images with GPS. Assuming camera clock approx same as GPS clock.

The issue was within the .csv file. There were duplicate records that were attempting to load as the ID value. After deleting the duplicate records, the transformation file ran successfully.
Debbie

Import meta data wlst command from Java

Hi All,
Can any one please provide me a java code for importing meta data file using WLST commands.

HI Joe,
As a professional news and sports photographer I cannot use Aperture for this problem alone. I live and die by my captions and if a photo isn't captioned, or incorrectly captioned, it might as well not exist at all. Fixing the IPTC import problem is No 1 priority for me.
As it is at the moment only half of the caption (description) comes in and some fields are missing entirely. This is only with RAW files, JPEG files import perfectly.
Whilst we wait for this issue to be resolved (and PLEASE can it be soon!) is there anyway of working with the IPTC from the JPEG?
If I shoot RAW and JPEG together can Aperture show both the RAW and the JPEG side by side so that I can lift from JPEG and stamp the RAW with the IPTC data? Even better, can something be written into Aperture where I can select all the RAW & JPEG images and just select a command saying 'copy IPTC data from RAW to JPEG'? This would be a very helpful temporary workaround.
Finally, and I've put this in the feedback, can we have a much bigger window for IPTC data entry? Personally I would like a pop-up window similar to PhotoMechanic, and I'd like to be able to save my caption so that the next time I import images I can just selected the saved caption instead of going through all the fields setting it up again.
For Aperture to be used as a DAM for my huge library I need the IPTC to be fully featured.
Power Mac G5 Duel 2Ghz, 30" Cinema Display Mac OS X (10.4.7) MacBook
Power Mac G5 Duel 2Ghz, 30" Cinema Display Mac OS X (10.4.7) MacBook

How do I import the data from Excel (.xls) file into Oracle Database table

I have an excel file with 5 columns of 5000 rows.
I have to import 5000 rows of data into my oracle table with
same column names & Data types.
What is the best advise for this ?
Thanks.
Srini

You can connect to Oracle from Excel directly. I know you can read data but am not sure if you can export data.
Other option is to import the data into Access.
Create an ODBC connection for Oracle
Use the to connect to Oracle from Access
Export data to Oracle from Access
Shakti
http://www.impact-sol.com
Developers of Guggi Oracle - Tool for DBAs and Developers

Character problem in toad import table data from excel

Hi everybody,
I want to import data from an excel file to an Oracle table, so I'm using Toad's "Import Table Data" tool for this purpose.
The problem is Oracle doesn't import non-english characters properly.
My database is XE and character set is 'AL32UTF8'.
I searched web, but didn't find the solution.
Please help...

Hi again,
Thank you for your reply Srini, but it is not about Toad.
Character encoding of Excel causes the problem.
I exported an unicode encoded csv file from excel and tried to load data from that file. It worked.
Thanks.

Importing form data into Excel

I am doing a survey in Dreamweaver for a client. He wants the
data sent to him in an email, and he wants the data exported into
an Excel file for him to analyze. Does anyone know how to do this,
or where I should start? Cold Fusion? I'm not a developer, I know
just enough to be dangerous! Any help would be greatly appreciated.
Thanks

>How is a csv file created?
It's pretty simple code - in asp using the FSO to write the
form contents to a text file on the server in csv format. When a
form is submitted, I just append the content to a new line in the
file.
>How would the excel document be linked?
You can create a web query in Excel from the Data menu, the
Import External Data, then new web query. Your menu options may be
different depending on which version you have. Once the query is
defined and the sheet is saved, you can simply open it and click
refresh data and the contents of the file will be
transferred.

Import Meta data

Sorry if this has been answered before but is there a simple way to import my images, not from iPhoto, that have meta in .xmp files into Aperture. I do plan to keep my file structure and not actually import them into the Aperture Library.
An automator action perhaps?
I'm sure I'm not the only one with 20 or 30k images, meta intact in .xmp, to want to put this into Aperture. It may be the last hurdle to actually using the software.
Thanks!

HI Joe,
As a professional news and sports photographer I cannot use Aperture for this problem alone. I live and die by my captions and if a photo isn't captioned, or incorrectly captioned, it might as well not exist at all. Fixing the IPTC import problem is No 1 priority for me.
As it is at the moment only half of the caption (description) comes in and some fields are missing entirely. This is only with RAW files, JPEG files import perfectly.
Whilst we wait for this issue to be resolved (and PLEASE can it be soon!) is there anyway of working with the IPTC from the JPEG?
If I shoot RAW and JPEG together can Aperture show both the RAW and the JPEG side by side so that I can lift from JPEG and stamp the RAW with the IPTC data? Even better, can something be written into Aperture where I can select all the RAW & JPEG images and just select a command saying 'copy IPTC data from RAW to JPEG'? This would be a very helpful temporary workaround.
Finally, and I've put this in the feedback, can we have a much bigger window for IPTC data entry? Personally I would like a pop-up window similar to PhotoMechanic, and I'd like to be able to save my caption so that the next time I import images I can just selected the saved caption instead of going through all the fields setting it up again.
For Aperture to be used as a DAM for my huge library I need the IPTC to be fully featured.
Power Mac G5 Duel 2Ghz, 30" Cinema Display Mac OS X (10.4.7) MacBook
Power Mac G5 Duel 2Ghz, 30" Cinema Display Mac OS X (10.4.7) MacBook

Import meta data file - bridge. Adding keywords to existing files

Hi There.
I have an excel log with file names in one column, keywords in another.
I have the same art files in bridge, sans any keywords.
Is it possible to import my excel log (or csv, or whatever format) into Bridge, and have it see those file names, and add the associated keywords to the files which have the same file name within Bridge?
Rather not have to keyword alllll the files again since I already have the data.

Can somebody new to Bridge CS3 and with no programming expertise import metadata into Bridge.
I have much data in a FileMaker Pro file.
Thank you,
Pierre

I'm trying to import raw data from excel file to diadem, how can i do that, and also i want to know if i can put header for it or not?

i'm using diadem version 8.1, and my operating system is windows Me.
i'm also want to know if the diadem hae an "undo button" or not??
Thansk.

Hi,
To import EXCEL files you can open the device DATA and then go to the menu FILE->OPEN. In the following dialog you must set the FILE TYPE to Excel. If you open an Excel file with that settings the Excel-file-import-wizard will be launched. With the wizard you configure the parameters which should be imported (that includes header parameter too). Please refer to the NI-Web page to get the latest service pack "SP1d" for the Excel import filter (http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C104B?opendocument&node=132070_US)
Yes, in DIAdem 8.1 we support undo for displacements in the device GRAPH. For DIAdem 9 we expand this functionality.
I hope this information will help you.
Greetings
Walter Rick

How to show NULL value when import data into excel

when retrieve data from sql server and import these data into excel.
data source is like : select a ,b c from tab
if a,b,c is nullable. when import these NULL value into excel, it becomes blank value, there is nothing in the excel cell.
if i don't want to use select isnull(a,'NULL') as a to convert the values.
what's else can i do to make it? is there a way to prevent changing the NULL to blank ?
or is there an easy solution to replace all the blank value to NULL in the excel ?

help me ~

Problems with Importing / Exporting Keywords and Meta Datas

Hi to all!
I recently upgraded to Aperture 3 and upgraded my referenced library.
Today I opened the Keyword HUD and noticed some keywords splattered in my list, which seem to be any older ones, since the new numbering indicated that they are not applied to any pictures.
So I deleted them.
Than I noticed the <Imported Keywords> folder, opened it, and it contained also a large number of previous keywords. Also they seemed not to be in use, so I also removed them.
Than I locked the Keyword HUD.
Now my question: If I export a version, with the option for 'include metadata' ticked, and edit the version than in Photoshop, and after it, import it back into the Aperture library I do have the problem.
I have tried 'Import Meta Datas' and and click 'Append'. Than it is recognizing the former keywords, which I would appreciate, but not as 'Imported Keywords'.
If I would open the file w/ the External Editor and return it back, I guess I would not have this problem. Usually I do open the referenced RAW file, and import than the edited version back into Aperture. Keywords are stored in the Library, so I would not avail the former given keywords than, is that right?
By the way are the keywords part of Meta Datas or not?
Are there any workarounds?
And had other people also problems with their keyword list after upgrading?
Thank for any ideas / infos!
Michael

Added header to CSV and to Code
$ImportFile = Import-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv" -Header Computer
foreach ($Computer in $ImportFile){
$path = "\\$Computer\c$\Epic\bin\7.9.2\Epic Print Service"
$xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullService//Cleanup | Select -ExpandProperty Node
if ($xml.ArchiveHours -eq '12' -and $xml.DeleteHours -eq '120') {
$Compliance = $True
}Else{
$Compliance = $False
} "$Computer","$Compliance" | Export-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Results.csv"
Results:
select-xml : Cannot find path '\\@{Computer=SW1412-16985}\c$\Epic\bin\7.9.2\Epic Print Service\EpicPullService.config.xml' because it does not exist.
At C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Check_PullServiceXML.ps1:4 char:8
+ $xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullServ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (\\@{Computer=SW...vice.config.xml:String) [Select-Xml], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.SelectXmlCommand
If it is not a CSV file then just get it with Get-Content
Get-Content C:\Users\UserName\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv |
    ForEach-Object{
        $computer=$_
        $path ="\\$computer\c$\Epic\bin\7.9.2\Epic Print Service\\EpicPullService.config.xml"
¯\_(ツ)_/¯

Images (w/correct meta data) are in catalog and on disk, but LR 5.7 considers them new on Import

For reasons explained below, I want to try to re-import all my images into LR and hope that none/few are in fact considered new and are imported. Yet, for some folders, LR is apparently unable to detect that my source images are already in the catalog, and are on disk, and that the source file meta data matches what LR knows about the images. When I click an image in LR and Show in Finder, I do see the imported image on disk. I can edit the image in the Develop module. So, it seems good, but all is not well.   Sorry for the long post here, but I wanted to provide as much info as I could, as I am really seeking your help, which I'd very much appreciate.
Here are some screen shots that illustrate the problem:
Finder contents of the original images
LR folder hierarchy
an image as seen in LR
Finder content of external LR copy of images
import showing 10 "new" photos
The original images ... (I'm not sure why the file date is April 2001 but the actual image date is January 2011; I may have just used the wrong date on the folder name?)
The LR folder hierarchy ...
An image as seen in LR ...
The external folder containing the images in the LR library
But on import of the original source folder, LR sees 10 "new" photos ...
I tried "Synchronize Folder ..." on this particular folder, and it simply hangs half-way through as seen in the screen shot below.   IS THIS AN LR BUG?   This is really odd, since "Synchronize Folder ..." on the top-level folder completes quickly.
I have a spreadsheet of of the EXIF data for the original files and those created by LR. (I extracted this info using the excellent and free pyExifToolGui graphical frontend for the command line tool ExifTool by Phil Harvey.)   Almost all of the Exif data is the same, but LR has added some additional info to the files after import, including (of course) keywords. However, I would not have expected the differences I found to enter into the duplicate detection scheme. (I didn't see a way to attach the spreadsheet to this posting as it's not an "image".)
I'm running LR 5.7 on a 27" iMac with Yosemite 10.10.2, having used LR since LR2. I have all my original images (.JPEGs and RAWs of various flavors) on my internal drive on the Mac.   To me this is like saving all my memory cards and never re-using them.   Fortunately, these files are backed up several ways.   I import these images (copying RAWs as DNG) into LR with a renaming scheme that includes the import number, original file creation date and original file name.   There should be one LR folder for each original source file folder, with the identical folder name (usually a place and date). I store the LR catalog and imported images on an external drive. Amazingly and unfortunately my external drive failed as did it's twin, same make/size drive that I used as a backup with Carbon Copy Cloner.   I used Data Rescue 4 to recover to a new disk what I thought was almost all of the files on the external drive.
So, I thought all would be well, but, when I tried "Synchronize Folder" using the top-level folder of my catalog, the dialog box appeared saying there were over 1000 "New" photos that had not been imported. This made be suspicious that I had failed to recover everything.   But actually things are much worse than I thought..   I have these counts of images:
80,0061 files in 217 folders for my original source files (some of these may be (temporary?) copies that I actually don't want to import into LR)
51,780 files in 187 folders on my external drive containing the LR photo library
49,254 images in the top-level folder in the LR catalog (why different from the external file count?)
35,332 images found during import of the top-level folder containing original images
22,560 images found as "new" by LR during import
1,074 "new" images reported by Synchronize Folder ... on the top-level folder in the catalog; different from import count
Clearly things are badly out of sync.   I'd like to be sure I have all my images in LR, but none duplicated.   Thus, I want to try to import the entire library and have LR tell me which photos are new. I have over 200 folders in LR. I am now proceeding to try importing each folder, one at a time, to try to reconcile the differences and import the truly missing images. This will be painful. And it may not be enough to fully resolve the above discrepancies.
Does anyone have any ideas or suggestions? I'd really appreciate your help!
Ken

Thanks for being on the case, dj!   As you'll see below, YOU WERE RIGHT!      But I am confused.
    1. Does the same problem exist if you try to import (not synchronize) from that folder? In other words, does import improperly think these are not duplic
YES. Import improperly thinks they are NOT duplicates, but they are in fact the same image (but apparently not the EXACT SAME bytes on disk!)
    2. According to the documentation, a photo is considered a duplicate "if it has the same, original filename; the same Exif capture date and time; and the same file size."
This is my understanding too.
    3. Can you manually confirm that, for an example photo, that by examining the photo in Lightroom and the photo you are trying to synchronize/import, that these three items are identical?
NO, I CAN'T! The ORIGINAL file name (in the source folder) is the SAME as it was when I first imported that folder. That name is used as part of the renaming process using a custom template. However, the file SIZES are different.    Here is the Finder Get Info for both files. Initially, they appeared to be the same SIZE, 253KB, looking at the summary. But, if you look at the exact byte count, however, the file sizes are DIFFERENT: 252,632 for the original file and 2252,883 for the already-imported file:
This difference alone is enough to indicate why LR does not consider the file a duplicate.
Furthermore, there IS one small difference in the EXIF data regarding dates ... the DateTimeOriginal:
                                                                                               CreateDate              DateTimeDigitized                    DateTimeOriginal              FileModifyDate                              ModifyDate
ORIGINAL name: P5110178.JPG                                     2001:05:11 15:27:18    2001:05:11 15:27:18-07:00        2001:01:17 11:29:00        2011:01:17 11:29:00-07:00       2005:04:24 14:41:05
After LR rename: KRJ_0002_010511_P5110178.JPG    2001:05:11 15:27:18    2001:05:11 15:27:18-07:00        2001:05:11 15:27:18        2011:01:17 11:29:02-07:00       2005:04:24 14:41:05
So ... now I see TWO reasons why LR doesn't consider these duplicates.   Though the file NAME is the same (as original), the file sizes ARE slightly different. The EXIF "DateTimeOriginal" is DIFFERENT.   Therefore, LR considers them NOT duplicates.
     4a. With regards to the screen captures of your images and operating system folder, I do not see that the filename is the same; I see the file names are different. Is that because you renamed the photos in Lightroom (either during import or afterwards)?
I renamed the file on import using a custom template ...
        4b. Can you show a screen capture of this image that shows the original file name in the Lightroom metadata panel (it appears when the dropdown is set to EXIF and IPTC)?
SO ....
The METADATA shown by LR does NOT include the ORIGINAL file name (but I think I have seen it displayed for other files?). The File SIZE in the LR metadata panel (246.96 KB) is different from what Finder reports (254 KB). There are three "date" fields in the LR metadata, and five that I've extracted from the EXIF data.   I'm not sure which EXIF date corresponds to the "Data Time" shown in the LR metadata.
I don't understand how these differences arose.   I did not touch the original file outside LR.   LR is the only program that touches the file it has copied to my external drive during import. (though it was RECOVERED from a failed disk by Data Rescue 4),
NOW ...
I understand WHY LR considers the files different (but not how they came to be so). The question now is WHAT DO I DO ABOUT IT?   Is there any tool I can use to adjust the original (or imported) file's SIZE and EXIF data to match the file LR has? Any way to override or change how LR does duplicate detection?
Thanks so very much, dj.   Any ideas on how to get LR to ignore these (minor) differences would be hugely helpful.

Import data from excel using caption

Hi
I have an access database which I imported to PowerPivot .
the database contains fields with ugly names, and captions with readable names
when I get the data into PowerPivot it takes only the ugly fields names and not the captions.
how can I get PowerPivot to get the captions so the end user will get names that he can use?
Thank you

Hello,
The column description in MS Access is meta data and I don't know any import tool, like Excel / Power Pivot / Power Query, which supports to use "description" instead of the column namen; even because entering a "description" is
not mandatory in MS Access, while a column name always is.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Import data from excel/csv file in web dynpro

Hi All,
I need to populate a WD table by first importing a excel/CSV file thru web dynpro screen and then reading thru the file.Am using FileUpload element from NW04s.
How can I read/import data from excel / csv file in web dynpro table context?
Any help is appreciated.
Thanks a lot
Aakash

Hi,
Here are the basic steps needed to read data from excel spreadsheet using the Java Excel API(jExcel API).
jExcel API can read a spreadsheet from a file stored on the local file system or from some input stream, ideally the following should be the steps while reading:
Create a workbook from a file on the local file system, as illustrated in the following code fragment:
          import java.io.File;
          import java.util.Date;
          import jxl.*;
         Workbook workbook = Workbook.getWorkbook(new File("test.xls"));
On getting access to the worksheet, once can use the following code piece to access individual sheets. These are zero indexed - the first sheet being 0, the second sheet being 1, and so on. (You can also use the API to retrieve a sheet by name).
          Sheet sheet = workbook.getSheet(0);
After getting the sheet, you can retrieve the cell's contents as a string by using the convenience method getContents(). In the example code below, A1 is a text cell, B2 is numerical value and C2 is a date. The contents of these cells may be accessed as follows
Cell a1 = sheet.getCell(0,0);
Cell b2 = sheet.getCell(1,1);
Cell c2 = sheet.getCell(2,1);
String a1 = a1.getContents();
String b2 = b2.getContents();
String c2 = c2.getContents();
// perform operations on strings
However in case we need to access the cell's contents as the exact data type ie. as a numerical value or as a date, then the retrieved Cell must be cast to the correct type and the appropriate methods called. The code piece given below illustrates how JExcelApi may be used to retrieve a genuine java double and java.util.Date object from an Excel spreadsheet. For completeness the label is also cast to it's correct type. The code snippet also illustrates how to verify that cell is of the expected type - this can be useful when performing validations on the spreadsheet for presence of correct datatypes in the spreadsheet.
String a1 = null;
Double b2 = 0;
Date c2 = null;
                    Cell a1 = sheet.getCell(0,0);
                    Cell b2 = sheet.getCell(1,1);
                    Cell c2 = sheet.getCell(2,1);
                    if (a1.getType() == CellType.LABEL)
                       LabelCell lc = (LabelCell) a1;
                       stringa1 = lc.getString();
                     if (b2.getType() == CellType.NUMBER)
                       NumberCell nc = (NumberCell) b2;
                       numberb2 = nc.getValue();
                      if (c2.getType() == CellType.DATE)
                        DateCell dc = (DateCell) c2;
                        datec2 = dc.getDate();
                       // operate on dates and doubles
It is recommended to, use the close() method (as in the code piece below)   when you are done with processing all the cells.This frees up any allocated memory used when reading spreadsheets and is particularly important when reading large spreadsheets.
          // Finished - close the workbook and free up memory
          workbook.close();
The API class files are availble in the 'jxl.jar', which is available for download.
Regards
Raghu

How to import measurment data from a Excel File to Citadel DataBase?

A Microsoft Excel File is being created in a PC and I want to include that flie´s data into my citadel Database wich is in another PC.

I give a example "Importing Spreadsheet Data to the Citadel Database" in the LabVIEW Version 6.1 and LV-DSC 6.1.
LabVIEW 7.0 with LV-DSC you must in the ini file "DSCEngine.ini"
set NoShutdownLog=1 and UseServerTimestamps=TRUE.
kind regards
amcholger
Attachments:
Write_File_to_Citadel_Example.zip ‏139 KB
Write_File_to_Citadel_VI_Server.zip ‏289 KB

Import Meta Data to Excel

Similar Messages

Maybe you are looking for