Import Spreadsheet error
I am attempting to import a spreadsheet using HTMLDB 1.6. I want it to create the table for me. The table name is NAME_TEMP. There are 65 columns and about 1050 rows in the .csv file. When I press "Next" on the "Table Properties" step, I receive the following error: "The identified column name is an Oracle reserved word." I have checked all of the column names and I don't believe any of them are reserved words. I have also gone through and marked the "upload" option to "No" for all the columns except two of them, LNAME and FMNAME, which I am sure are not reserved words and I still get the same error message.
Anyone run into this before or have any suggestions?
When I first started using the program I had the similar problem. I'm not sure why, but even if the column names were close to the reserved word it would fail. I ended up adding a '_s' to the column names to get over it. Also, the import process validates all column names before checking to see which columns you are importing, so check the names of the columns you aren't importing as well. My guess would be that's your issue. I ran a test and your column names (the ones you are importing) are OK as well as the table name...
Similar Messages
-
Import Spreadsheet returns error
Hi,
I'm trying to import excel spreadsheet. For one file it works and for another it doesn't.
On examination I found that the one that doesn't work has got filters applied on some of it's columns. Is this the reason that it doesn't work.
Can anybody please let me know if that is the reason then is there any workaround.
Many Thanks,
PrajHi Praj,
I could not reproduce your issue. I did a test as the followings:
Create a excel , and insert a tabel
Type some value for this tabel
Filter the value on two columns
Save the excel
Create a Import Spreadsheet list using the above excel file
After creating the list, all values of the tabel in the excel displayed in the list.
What data did you use for the Import Spreadsheet list?
Which error did you meet when you imported the problematic excel file?
Please try create another excel containing same data with the problematic excel, then import it, compare the result.
If this issue still exists, please check the log file to find more information about this issue.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Import Spreadsheet App not working
I am trying use the Import Spreadsheet App in Sharepoint 2013 and always get the same error:
"Could not lead an object because it is not available on this machine"
This was working on a previous install of SharePoint 2013 I had.
Is something not installed or configured?
I am using IE 11 and have the sharepoint site in trusted sites?
Please help.Have you checked the ULS logs? Also, this could be due to your office add-ins being corrupted... maybe try clearing your IE cache (including addins), and if that doesn't work an office repair may help. Also make sure that you are using the 32-bit
version of IE and not a 64 bit version (I've seen cases where windows "Pins" the 64 bit version as the default version on your task bar, so check IE version (it will say 64 bit if it is using x64), and make sure you are using 32-bit. -
PI 711 Installation: Loading of 'SAPNTAB' import package: error but no log
Hello,
I'm perfromong an installation of a SAP PI 7.11 ystem on windoows Server 2003 and Oracle 10.2 .
I've perfromed the installation of the DEV system without particular issue.
But now when tryning to install the QAS system , I can't finish the installation : Im' stuck in the import ABAP step ...
It is impossible to import the 'SAPNTAB' package. I couln't find the reason.
I've tried updating the R3load binary, rebooting the server, restarting the instalaltion from scratch but it didn't help.
Here I provide you the logs, maybe you can help me
SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110223195542
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 14 2010 22:52:23
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS deleted/truncated #20110223195543
sapinst_dev.log
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2011-02-23 19:56:12.607
CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\sapjvm\sapjvm_5\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 5.1.024)
SAP Java 64-Bit Server VM (build 5.1.024, Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode))
Import Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29.
TRACE 2011-02-23 19:56:12.607
Function setMessageIdOfExceptionMessage: nw.programError
ERROR 2011-02-23 19:56:12.607
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
import_monitor.log
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is started.
INFO: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2011-02-23 19:55:42
Data codepage 1100 is determined using TOC file 'E:\SAPCD\51036706\DATA_UNITS\EXP1\DATA\REPOSRC.TOC' for package 'REPOSRC'.
INFO: 2011-02-23 19:55:42
Version table 'SVERS' is found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2011-02-23 19:55:42
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
ERROR: 2011-02-23 19:55:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process 'E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast' exited with return code -1,073,741,819.
For mode details see 'SAPNTAB.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-02-23 19:56:12
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2011-02-23 19:56:12
1 error(s) during processing of packages.
INFO: 2011-02-23 19:56:12
Import Monitor is stopped.
Edited by: Raoul Shiro on Feb 23, 2011 8:11 PM
Edited by: Raoul Shiro on Feb 23, 2011 8:12 PMHello,
Thank you for your answer.
I already opened a sap cutomer call, they answered that it it not a database issue,
I restarted the installationfriom scracth , but i still got the same error :
Here is the full content of the file SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL SAPNTAB.TSK ORA -l SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: job completed
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS created #20110225170643
Regards.
Raoul -
AP INVOICE IMPORT시 GDF 관련 ERROR 가 날때
제품 : FIN_AP
작성날짜 : 2003-01-20
AP INVOICE IMPORT시 GDF 관련 ERROR 가 날때
====================================
PURPOSE
AP Invoice Import시 GDF 관련 Error 가 발생할 때의 해결책을 제시한다.
Problem Description
Korean Tax program을 설치하여 사용하는 고객 사이트에서 AP INVOICE IMPORT 수행시 TAX 관련한 GDF IMPORT 부분에서 ERROR 가 발생하였다.
Error Message 는 다음과 같다.
Invoic 무효한 GF_CONTEXT 컬럼 GLOBAL_ATTRIBUTE_CATEGORY 에 무효한 값
Workaround
KR TAX 프로그램에 따른 specific 한 문제이므로 global한 support를 받을 수 없고 아래와 같은 작업을 해주어야만 한다.
Solution Description
1. GDF 생성
JG_AP_INVOICE_INTERFACE GDF를 JG_AP_INVOICES와 마찬가지로 Setup한다.
2. 다음의 Package의 에서 '수정' 이란 주석이 달린 부분과 같이 수정하여 컴파일 한다.
PACKAGE BODY JG_GLOBE_FLEX_VAL
......(중략)...
IF p_calling_program_name = 'APXIIMPT' THEN --Invoice Gatewayvalidation prog
IF p_context_code IN ('JA.TH.APXIISIM.INVOICES_INTF',
'JA.TW.APXIISIM.INVOICES_FOLDER',
'JA.SG.APXIISIM.INVOICES_FOLDER',
-- 'JA.KR.APXIISIM.INVOICES_FOLDER',
'JA.KR.APXINWKB.INVOICES', -- 수정
-- 'JA.CN.APXIISIM.INVOICES_FOLDER',
-- 'JA.KR.APXIISIM.LINES_FOLDER',
-- 'JA.CA.APXIISIM.LINES_FOLDER',
'JE.BE.APXIISIM.EFT',
......(중략)...
FUNCTION reassign_context_code(
p_global_context_code IN OUT VARCHAR2) RETURN BOOLEAN IS
BEGIN
IF (p_global_context_code IS NULL) THEN
RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.TH.APXIISIM.INVOICES_INTF') THEN
p_global_context_code := 'JA.TH.APXINWKB.INVOICES';
RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.TW.APXIISIM.INVOICES_FOLDER') THEN
p_global_context_code := 'JA.TW.APXINWKB.INVOICES';
RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.SG.APXIISIM.INVOICES_FOLDER') THEN
p_global_context_code := 'JA.SG.APXINWKB.INVOICES';
RETURN(TRUE);
-- ELSIF (p_global_context_code = 'JA.CN.APXIISIM.INVOICES_FOLDER') THEN
-- p_global_context_code := 'JA.CN.APXINWKB.INVOICES';
-- RETURN(TRUE);
-- ELSIF (p_global_context_code = 'JA.KR.APXIISIM.INVOICES_FOLDER') THEN
-- p_global_context_code := 'JA.KR.APXINWKB.AP_INVOICES';
-- RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.KR.APXINWKB.INVOICES') THEN
p_global_context_code := 'JA.KR.APXINWKB.INVOICES';
RETURN(TRUE); -- 수정
-- ELSIF (p_global_context_code = 'JA.KR.APXIISIM.LINES_FOLDER') THEN
-- p_global_context_code := 'JA.KR.APXINWKB.INVOICE_DISTR';
-- RETURN(TRUE);
Reference Documents
------------------- -
I have an ipad and have just downloaded the lastest update, now I have a very very important spreadsheet that will not open!!!! other spreadsheets open fine but for some just this one will not open. I have rebooted the ipad and tried re-syncing but to no avail, can anyone HELP?????
I had the same problem. I created an iCloud account and backed up my iPad to iCloud. I then went to www.iCloud.com, signed-in and then I was able to download my spread sheet data. At least I have my data.
-
Is there a way to enable & configure Volume Discounts via the Product Import Spreadsheet? Is there a way to enable more than 2 Quantity Thresholds?
Hi Michael,
You can set the thresholds via an import file. The easiest way to do this (and this goes for all importable data, webapps included, 301 redirects and so on) is this:
1. go into the Admin and create a single item, in you case create a test product and set the thresholds
2. export that data - in your case export the product list
3. take a look at how the data looks like in the export file so you can get an idea of how the format should be like in the import file
Unfortunately you cannot set more than 2 thresholds, that is not possible at the moment.
Thanks,
Mihai -
ABAP Import Phase error during Install
Hi out there. I am installing an ERP system ECC 6.0 SR3 with just the AS ABAP and ECC components. It is now on the ABAP import phase and returns the error that certain ABAP objects are failing out of the 112 objects that is processing. Current examples are : -
=============================================================================
Loading of 'SAPSDIC_2' import package: ERROR
(DB) ERROR: DDL statement failed
(CREATE INDEX "VRSX2~1" ON "VRSX2" ( "RELID" , "OBJNAME" , "VERSNO" ) )
DbSlExecute: rc = 99
(SQL error -602)
error message returned by DbSl:
=============================================================================
Loading of 'DD03L' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
Loading of 'SAPAPPL2_9' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
I wish to know how else can 1 work around this ABAP import phase with errors such as these? Is there a manual procedure I can perform for this phase during installations so to avoid these errors that come up. And then re-run the install that goes past this?
Any help will be greatly appreciated.
Thanks in advance.Hi
Try increasing your shared pool size
login to database level
sqlplus "/as sysdba"
>show parameter shared_pool_size;
if the value is some thing aroung 150 to 200 MB increase it to 250MB
>alter sytem set shared_pool_size=250M scope=both;
Hope this will solve your problem
Regards
Uday -
Import rules, error message "Invalid system"
Hi,
When importing rules under Rule Architect - Import rules, error message "VBS is invalid system" . In the configuration tab we have system and System Name defined as VBS, test connection successful.
Why is it giving an error message VBS is invalid system? Please advise.
Thanks,
SriHi,
Is it rule import after taking an export from other system? In that case, make sure destination system name doesn't contain any space in it.
Also, make sure text and auth Objects are uploaded for VBS system before doing rules import.
Regards,
Sabita -
Why do I get a "can't import spreadsheet because it was created with an unsupported application version" alert when the updated version was purchased direct from the Mac App Store? The spreadsheet is now lost somewhere!
Pages 4.3 should still be in an iWorks folder within your Applications folder.
http://www.apple.com/feedback/pages.html -
Loading of 'SAPSSEXC' import package: ERROR
Hi All
I am installing Solution Manager 7.0
but it prompt error when import ABAP ......
Loading of 'SAPSSEXC' import package: ERROR
Edited by: Kevin Wong on Jun 19, 2009 9:53 AMLog of 'SAPSSEXC'
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090618160337
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:39
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe -ctf I F:\software\sap\51033518_2\EXP4\DATA\SAPSLEXC.STR C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL SAPSLEXC.TSK ORA -l SAPSLEXC.log
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: job completed
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090618160337
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090618160337
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:39
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090618160338
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090619095804
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:39
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090619095805
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090619153522
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:39
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
F:\usr\sap\PAS\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090619153527
Edited by: Kevin Wong on Jun 19, 2009 9:54 AM -
Language import RSTLAN_IMPORT_SINGLE error
hi all
I excuted RSTLAN_IMPORT_SINGLE for change request (exported Language) import.
but error occur
==================================================
1AETW062 client "700" doesn't exist. Please choose another client
==================================================
700 is DEV client but I want import to 100 client in PRD.
system info
ECC 6.0 basis 70017
tp, r3trans the latest version
one more question!!
when I check Create Backup Request option
error occur
==================================
could not create backup request
==================================
plz any help
thankshi Shashank Awasthi
In DEV, I executed report RSLTMOD that is made change request for modification translation.
and then I try to import change request using RSTLAN_IMPORT_SINGLE report in PRD (upgraded)
DEV client is 700 and PRD client is 100 so I want to import change request 100 client in RRD.
above error message is occured RSTLAN_IMPORT_SINGLE report.
this problem is kernel patch in searched some notes but I use the latest version.
plz help
thanks -
Ability to Import Spreadsheet Data into Table in Apps added Anytime Soon??
I love HTMLDB so much, and I thought I would never find anything it couldn't do, but I have run headlong into a problem that I've discovered many users have.
The Import Spreadsheet Data into Table functionality available in Data Workshop is such a treasure, and I was hoping with all of my heart that such functionality would be available for use inside the User Applications in HTMLDB 2.0. Alas, it is not so.
I know some brave folks have come up with work-arounds for this lack, and I applaud them. However, none of those will work for the situation I am faced with. I am about to strike out into the no-man's-land of trying to create my own PL/SQL csv file parsing function. Please wish me luck. Also, could you please tell me if this functionality is going to be included anytime soon?Well I looked at the FLOWS_020000.WWV_FLOW_LOAD_DATA.LOAD_CSV_DATA procedure
From what I can gather(considering nobody cant look at the actual procedural code):
P_FILE_ID seems to be file id you find in FLOWS_FILES.WWV_FLOW_FILE_OBJECTS$
P_CNAMES seems to be the column names of table you are loading into
P_UPLOAD seems to be the names of field from file you are loading
P_SCHEMA seems to be the schema that contains table where data will be loaded
P_TABLE seems to be table that you load data into
P_DATA_TYPE seems to be the datatypes from file to be loaded
P_DATA_FORMAT not sure
P_PARSED_DATA_FORMAT not sure
P_SEPARATOR seems to be the field seperator from file
P_ENCLOSED_BY seems to be what fields will be enclosed with
P_FIRST_ROW_IS_COL_NAME seems to be to tell whether or not first row contains column headings
P_LOAD_TO not sure
P_CURRENCY seems to be the currency symbol that comes from file
P_NUMERIC_CHARS not sure
P_CHARSET not sure
P_LOAD_ID not sure
Essentially you could run this process provided you get all the kinks worked out(that is what all the parameters mean/are expected)...
...or..
you write your own process:
- that reads the blob/clob content line by line
declare
n number;
buffer varchar2(4000);
begin
(do some sort of loop until end of length of lob)
n := dbms_lob.instr( "your lob", ',',"next comma position" );
if ( nvl(n,0) > 0 )
then
buffer := dbms_lob.read( p_lob, "amount of lob length to read", n);
end if;
end;
The above code with some tweaking will read the lob. However you still will have to add a piece that creates sql insert statement. One of the pitfalls I see with custom code is the fact that if you end up with huge lob string you will run into problem of creating sql insert statement. Not the actual statement but assigning the statement to a variable due to datatype lengths.
Hopefully this will help you more in the right direction! -
Photoshop Elements 10 Import Failed Error
I have installed Elements 10 and when I try to import my Photos I get a Import Failed Error. Any suggestions. PE 10 was working prior and I had to replace one of my drives and I did a clean install.
Any Ideas?
Windows 7 UltimateYes, developing a new catalog worked in my case...
Why would this happen to a catalog?
Can I move them into the old catalog safely?
If so, how do I do that?
How do I move all the keyword tags into the new catalog?
Thanks! -
LR cannot Import - Unknown Error
I am getting this error message when trying to import a catalog "Lightroom could not import because of Unknown Error".
The catalog I am attempting to import contains about 6000 images and was built by the beta during the Beta phase. It opens fine by itself - as it worked throughout the beta. I have no problems opening it and working on it directly with LR3.0.
However, since this was my catalog for just a couple of projects during the Beta, I now want to fold it into my main catalog of some 19,000 images. My main catalog was my LR2.7 catalog and I have successfully converted it to LR3.0 - it opens fine and works fine.
Said in another way, while running 3.0, I can switch freely back-and-forth between these 2 catalogs using File | Open Recent
I am just unable to import the beta's converted catalog into it. After doing File | Import from Catalog, LR asks for the name - I navigate to the xxx.lrcat file and select it. The import starts and displays a Preparing to Import information window...perhaps for a second or two, then stops with the above message which is reported as a Warning .... however, the import stops at this point.
So, this is kind of serious......
Both catalogs are on the same drive, with plenty of free space.
What additional information do you require to resolve this ?
jcthanks for the input .... I had some duplicates in the beta catalog. I
resolved them manually then removed them from the catalog and Optimized it.
I was then able to Import from Catalog without difficulty.
jc
From: Gary Jones UK
Sent: Wednesday, June 09, 2010 7:48 AM
To: Jim Camelford
Subject: LR cannot Import - Unknown Error
This has already been reported and the problem has been identified by Adobe.
The key post is this one: http://forums.adobe.com/message/2877882#2877882
Maybe you are looking for
-
Rendering of bug report broken
Hi I just reported http://scn.sap.com/thread/3583863 I also got IE10 installed by SAP IT today ,see Now, the rendering of Tiny Link to SCN Wiki pages can not be used from non-SAP networks looks bad , e.g.
-
Camera raw 6.3 "Clarity Bug"
Hi, I am using Photoshop CS5 (64bit) + Camera raw 6.3 + win 7 x64 on both of my computers and having some problems with Camera raw 6.3 "clarity" settings. When I open Nikon D700 raw files and do some "Adjustment brush (K)" every settings which I app
-
How to see different views created for material
hello sap gurus How to see, under which all views the material has been created? Points will be given Thanks in advance Vijay
-
BUG: Chord Grid Libraries not working in Snow Leopard 10.6.1
Hi, I have Logic Pro 9 installed both on my Leopard and on my Snow Leopard partitions (both are full installs). Chord Grid Libraries (I mean, the default one with more than 4500 chords) doesn't work in Snow Leopard. It works as expected in Leopard. A
-
I have an ether-channel configured between a Cisco 6500 and a juniper ex4500 The juniper mtu is configured as 1514 and the Cisco end 1500. I am seing giants on the interface on the cisco end. Ive tried a packet capture on the port-channel but I dont