IMPORTANCE OF DELTA SPECIFIC FIELD

respected all
WHAT IS THE SIGNIFICANCE OF THE FIELD"Field Nm" in the delta specific field in rso2. is this the key field for running the delta??
pls give me detaild answer as my delta is not working
thanks
abhay

Dear Mahadaya,
Here u are requesting for Generic delta
Case: the deleta filed
For example u are created one docuemnt based on created date u are getting data,if u r chenged that document when u r extracting the changed values will not be updated
if you go with (AEDAT) means document changed date automatically along with delts based on the the document change date which ever the changes are there for that document it will be reflectd
I think you under stood the concept.
It is purely based on the datasource andfunctionality which is the latest character will be updated with taht datasource that can be used.in delta update reference field.
Thanks &Regards,
Sathish

Similar Messages

Dillema in selecting Delta Specific Field

Hi Gurus,
I have stuck in a situation and would heavily appreciate your help.
I have created a Generic datasource ZAFRU which extracting data from AFRU table.
I used Last Changed On (LAEDA) as delta specific field but later i found it is not working because more than 50% of records dont have last changed on date (LAEDA) in it.
So, later i used Posting Date (BUDAT) as delta specific field but still facing a problem. Like, suppose there is a service order which is posted three months ago but changed 5 days ago so delta will not capture the changed record as posting date (BUDAT) is not changed but only Last Changed On date (LAEDA) is changed.
In this way i am not able to use either fields as delta specific fields.
Also, can't use timestamp for delta specific field as it is not present in AFRU table and Document number also as it is blank for all the records.
Please suggest what should i use in delta specific field so that i should not miss any record in BI.
Thanks,
Saurabh

Hi Saurabh,
First enable selections for ERSDA,LAEDA,BUDAT for the datasource on this table. Create three infopackages and write below routines on ERSDA,LAEDA and use these to the DSO. Even they are repeated it won't be a problem.
Once you write below code for an infopackage on say field ERSDA so what all the confirmations created from today to past 7 days will be coming into DSO.
Similarly for LAEDA and BUDAT.... also we create another two infopackages and load similarly every time to DSO which makes that no record to be missed.
data: l_idx like sy-tabix,
      l_sdate type SCAL-DATE,
      l_edate type SCAL-DATE.
read table l_t_range with key
     fieldname = 'ERSDA'.
   l_edate = sy-datum.
   l_sdate = l_edate - '7'.
        l_t_range-low = l_sdate.
        l_t_range-high = l_edate.
        l_t_range-sign = 'I'.
        l_t_range-option = 'BT'.
l_idx = sy-tabix.
modify l_t_range index l_idx.
p_subrc = 0.
Regards
vamsi
Edited by: vamsi talluri on Jul 13, 2011 7:43 PM

Delta-Specific Field for Generic DataSource

Hi,
I have defined a Generic DataSource for Transaction data on R/3-Side.
This DataSource is based on View/Table EKKO (Purchasing Document Header) for some specific customer requirements. Delta-Specific Field is AEDAT (Calend. Day). Safety Interval Upper Limit is set 1 Cal. Days. No Safety Interval Lower Limit has been defined. "New Status for Changed Records" has been marked.
When we see this DataSource in Extractor Checker (RSA3), this data source
Extracted all delta data where AEDAT is not blank.
When I see the content of table EKKO, I can find few records where AEDAT is blank.
These records are missing in Extractor Checker.
How I can solve this problem? Which delta-specific field can be used in
this generic Datasource? Should I define an additional Generic DataSource with
Delta-Specific Field BEDAT (as BEDAT is filled when AEDAT is blank in table EKKO)?
Thanks for the answer.

Delta based on calday wont pick all the records which are recently posted and you can not run the delta more than one time in a day ,end of the day only you can run the delta.
Set the delta as Tme Stamp and specify the Upper limit to 5 minuts.
We can run the delta no. times and pick the documents posted in short interval of time.
With Regards,
Kishore.

Delta Specific Field for LTAP

Hi guys,
    I tried using Field EDATU Date of Pick Confirmation (First Step) as Delta - Specific Field for one of my View Datasource on Table LTAP.
    However no DELTA's recieved for the past one month
    Can someone suggest another field in table LTAP that I can use.
    Thanks

Hi Chris
I have the same issue and have not found a suitable field. Now I am doing a full load with a routine selection on a combination of QDATU and EDATU into an DSO and have a delta from the DSO to the cube. If you get sorted with teh delta, please post the solution...
Cheers
L.

Can I use Dreamweaver to import data into specific fields on a website?

We need to build a website that will allow us to import data from an existing database, into specific fields on website (desktop and mobile). Is it possible to do that in Dreamweaver?

Ben answered your question. You asked if one CAN use DW to call data. Just understand that it isn't necessary to use DW for this, and there are good reasons not to.
Using a plug-in or data behaviors allows you to get up and running quickly, but they are like training wheels on a bicycle. Eventually they cripple your capabilities and you have to go back to the beginning to learn how to do things right, which means making the connections and writing the code yourself. Why not just do it the right way from the start?
If you script the database connections and queries yourself, you can still work within DW.
You did not specify which kind of server, database or scripting language you plan to use. The typical configuration is MySQL database and PHP scripting on Linux.

Dont have a delta specific field

Experts,
We dont have a single char to mention in "Field Nm".We are using a table for Generic Datasource.Can we create a new field in the table and use it in "Filed Nm".
If you have any suggestion.Plz tell me the navigation steps also or provide me the doc.
Points will be assigned.

Dear K V,
Kindly mention the BI version on which you are currently working.
Timestamp or date in delta is meant towards the delta management and need not relevant for Business reporting. delta related date or time are basically to check latency of data. I guess here yoyu are getting confused a little bit.
Reporting relevant dates are not usually a basis for delta management. Let me put an example in case of purchasing, there used to be document date. posting date, schedule delivery dates etc, all these dates are also stored normally in a single database table. These dates are either a current dates or historical or in future based on their business pespective, so used for business reporting. This information is stored in the database at different field in the record. This record has its metadata, which mentions information about himself, this information consists of created by, created on, changed by, changed on.
My dear friend, Out of this metadata, date residing in changed on is relevant for us. so please check in your z table about where this record changed on date is populated, and use for your delta build up.
So now search for the information I told to you.
Despite this, if u did not get any date directly then pick up date part from timestamp into the variable (type date) and then make this field as a basis for your delta.
hope this will show u path to get it done.

How to use customer-specific fields with FI-CA event 940?

The following text can be found under FI-CA event 940:
You can also set customer-specific fields if you have defined the predefined include for customer enhancements CI_FKK_ACCIT_CUS in the structure FKK_ACCIT_CUS. The fields included here must have the same field name as the fields included in the structure ACCIT. These can also originate from an enhancement of the coding block in General Ledger Accounting. The fields Reservation Class and Reservation Key of the reconciliation key and the totals record are available as import parameters.
My requirement is to populate the field HZUON in this event, which will be called when running t-code FPG1 (Transfer of FI-CA total records to general ledger)
The problem is the fact that the output of the event (i.e. output of function module FKK_SAMPLE_0940 at first) only have the following fields:
E_ZUONR     LIKE     ACCIT-ZUONR     Zuordnung (BSEG-ZUONR)
E_XREF2     LIKE     ACCIT-XREF2     Referenz (BSEG-XREF2)
E_SGTXT     LIKE     ACCIT-SGTXT     Positionstext
E_BUPLA     LIKE     ACCIT-BUPLA     Businnes Place (Korea only)
I tried adding a new field to structure CI_FKK_ACCIT_CUS and adding this field to the output of the event 940, but how do I ensure that the content of the field will be used to populate the HZUON field of the FI document during "transfer of FI-CA total records to general ledger"?
Cheers,
Teo

Hi Teo,
I happened to see this post from you when I searched for a similar scenario related to event 940. I also need to add two fields in CI_FKK_ACCIT_CUS and make these fields as outputof the event. Did you come across any solution for the same? If so, can you please share.
Regards,
Harikumar. S
Edited by: Harikumar Sasidharan on Dec 30, 2009 12:14 PM

How to find user exits for a specific field

hi,
    How can we find a user exit for a specific fields .
as i know Three ways to search user-exits
1. SE80 look includes in a packages with name user-exits
2. by zreport which will fetch user-exit in a T-CODE
3. SMOD
but what if we have to find a user-exit for particular field for e.g bupla(bussiness place) in MIRO.
Please suggest me.
Thanks and Regards ,
Rahul Singh.

Hi Rahul,
Here is the procedure to create field exits.
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
u2022     Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
Step 2: Go To Field Exit Transaction
u2022     The transaction to create field exits is CMOD.
u2022     You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
u2022     From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
u2022     After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
u2022     From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
u2022     After choosing this menu path, a dialog box will prompt you for the appropriate data element .
u2022     Enter the data element name and click the u2018Continueu2019 pushbutton.
u2022     Now, you will be able to create the function module associated to the data elementu2019s field exit.
Step 4: Create Function Module
u2022     You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the u2018Continueu2019 pushbutton.
u2022     In the u2018Function moduleu2019 field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
u2022     You can add an identifier (an underscore followed by a single character ).
u2022     The first function module for a data elementu2019s field exit must be created without an identifier.
u2022     To create the function module, click on the u2018Createu2019 pushbutton, choose menu path Function module -> Create, or press u2018F5u2019.
u2022     After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing u2018Enteru2019, you will be able to go ahead and create the function module.
u2022     Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
u2022     From the function moduleu2019s attributes screen, click on the u2018Source codeu2019 pushbutton or choose the Goto -> Function module menu path to the code of the function module.
u2022     Here you will add your desired functionality for the field exit.
u2022     Remember that field exitu2019s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
u2022     You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
u2022     After coding the function module, you must remember to activate it.
u2022     Use the Function module -> Activate menu path to activate the function module.
u2022     At this point, you can return to the field exit transaction.
u2022     You should be able to 'green arrow' back to this transaction.
u2022     When you return to the field exit transaction, you will see an entry for the newly created field exit.
u2022     At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
u2022     Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
u2022     This step is only needed if you want to make a field exit local.
u2022     To make a field exit local, select the field exit and click on the u2018Assign prog./screenu2019 pushbutton.
u2022     In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
u2022     In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the u2018Fld. Exitu2019 field.
u2022     If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
u2022     If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
u2022     The field exit must be active for it to be triggered by the system.
u2022     Activate the field exit by choosing the Field exit -> Activate menu path.
u2022     After assigning the field exit to a change request, its status will change to u2018Activeu2019 and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Execute the transaction SE38 with PROGRAM NAME - RSMODPRF
Then give the Data Element Name for which field you want to create the exit(Just cross check with your field data element) and execute.
then it takes you to SE37 with the function module name FIELD_EXIT_<DATA ELEMENT NAME> and then create the same function module.
and in the coding part, You can write your logic to display the output of that field. and activate it.
once you complete the above,
Again execute SE38 transaction with program RSMODPRF and again click on Execute button without any Data Element Name. Now you select the data element which you have created and click on Assign prog/ Screen button and assign the program name and screen number of the filed and click on the menu Field Exit and Activate.
Hope it helps.
Regards
Radhika
Edited by: Radhika Pande on Nov 26, 2009 7:58 AM

Business Partner Role Specific Field View in WebClient

Hello to everyone,
I have a question that really needs a answer. We are upgrading from SAP CRM v4 to SAP CRM v7.0 and as such we have a number of custom Business Partner Roles within the Person BP Type. Against these custom roles we have developed custom field and tabs in order to separate the content within the BP Role further.
After rolling off an implementation of SAP CRM v6.0 [2007], the following seems apparent:
- Assignment of Roles is done via an assignment block in the Customer Maintenance view.
- You can create Business Partners in different roles initially.
- You cannot maintain Business Partner details in specific roles
However, you cannot display the role specific fields as you can in the WinClient. As an example, a Citizen Role BP will have different fields to that of a Teacher, but these roles could be assigned to one Business Partner.
There does not seem to be any guidance as to how this is managed in the WebClient and as it seems a fundamental part fo the SAP CRM offering, you would have thought that this questions has been asked, but I have found no answers.
I really hope anyone can help and appreciate any time and effort put into solving my question.
Many Thanks,
MatFlat.

Hi MatFlat,
Yes, your observation is right - in the Web UI, fiel grouping is not implemented for roles. This is because the role concept is quite different between SAP Gui and Web UI.
In SAP gui, (CRM 4.0) roles had a functional meaning as well as a UI control. However, the concept was changed with Web UI. Now, roles have only a functional meaning, and no effect on the UI at all.
If you want to implement role based field grouping in Web UI, you need to define your own methods in the implementation class.
E.g : you can write code to influence the field properties based on the roles. I guess you can redefine the DO_PREPARE_OUTPUT methods of the impl class.
In order to get info about which roles the BP is maintained , you can use FM BUPA_ROLES_GET_2.
Hope this helps you.
Cheers,
Rishu.

Define read-only authorization for specific field(s) on a form for 11.5.9

Dear all,
Can you pls let me know how is it possible to define read-only authorization access for specific field(s) per responsibility / user on a form in 11.5.9?
For example I want to protect the item master file by assigning for example to users with responsibility buyer authorization to modify the buyer information but to have read-only only authorization on other sensitive fields such as make/buy flag, expense accounts, etc
Through UI Modeller I have only managed to make specific fields on specific forms invisible, or whole tabs invisible, to specific responsibilities but this does not cover my needs as I want them to be able to view the data of the fields but to not be able to update them

Arun,
Almost but not quite.. The example you've given has the person VO at the top level which includes all the id's (City, State etc). My use case is slightly different.
query 1
     select org_id, OrgName from x;
query 2
     select emp_id, emp_name from y where org_id = x.org_id
query 3
     multi-table join (approx 9 tables) to retrieve depts associated to employee
     where org_id = x.org_id
     and emp_id = y.emp_id
Rather than using LOV's would it be better to create VO's and pass in the bind parameters at run time?

Import steps not specific to Transport Request

Hi all,
I need to move 5 Released Transport Request as "Local Change Requests" to another SAP installation.
I followed two guides to do this:
SAP BASIS / ABAP - How to Export and Import an External Change Request - YouTube
How to copy Repository Objects between non-connected SAP systems - ABAP Development - SCN Wiki
However I have problems creating the Change Request that contains all my requests: if I generate it as Local Change Request it is not available on cofiles and data folders.
So I created a new Virtual System called M02 and I created a standard consolidation transport link between my original system M01 and the virtual system M02.
Then I created a new TRANSPORT OF COPIES Transport Request and I selected as target system M02. All objects are correctly added to the new request and the validation is correctly performed.
However when I release the request on the SOURCE server I get the following error:
M01#######            My Request Name
M01        System M01
             Checks at Operating System Level         05.03.2014 16:48:34    (0) Successfully Completed
             Pre-Export Methods                       05.03.2014 16:48:37    (0) Successfully Completed
             Export                                   05.03.2014 16:48:47    (0) Successfully Completed
      Import steps not specific to transport request
M02        Virtual System
             Selection for Import                     05.03.2014 16:48:47    (0) Successfully Completed
      Import steps not specific to transport request
"Import steps not specific to transport request" expanded as:
Feedback after export or import 05.03.2014 16:48:48    (0) Successfully Completed
I get this message even if I generate the new Change Request from a single Change Request (the first one that we released).
The cofiles and data files are correctly generated, however the IMPORT on the TARGET server returns an error (invalid data package)
My question is: is the "Import steps not specific to transport request" message correct, or should I modify something? Why am I getting this message?
Thank you

Hi Chinna,
Its a warning message you can ignore that... if you want to see what exactly the reason for warning in SE09 --> select the released request --> click the Transport Log Ikon --> select the warning message and click the spects Ikon --> go on expanding you can find the warnings of Objects in Yellow...
Hope this helps,
Sudhakar.

BP extend : how to use FM to update customer specific fields ?

Hello
I'm working on a CRM 2007 project and for customer needs, the BP data have been extent with specific fields using EEWB. So specific FMs have been automatically generated to manage the specific data. We want to use these FM to maintain the values of the specific fields. In the EEWB transaction, in the Task BUPA_API for the specific object, 2 FMs have been generated : ZZ1XO_BUPA_MAINTAIN and ZZ1XO_BUPA_MNTN_ALL : we suppose we have to use these FMs to update the values fo this object. This object (customer specific data) is time dependent with gaps and multiple instance. We tried to use these 2 FMs to update values but it does not work : anybody has already used this kind of FMs ?
Thanks to all.

Jerome,
Normally I use the FM modules generated by the EEWB that contain API to update the data. However keep in mind if this is a Z-Table and you don't like what is provided, then add your own BAPI modules to the BDT function group to update the data.
Take care,
Stephen

Issue in Updating Customer specific fields in WBS using BAPI_BUS2054_CREATE_MULTI

Hi Experts,
I am able to create the WBS element using BAPI_BUS2054_CREATE_MULTI.But the issue is i am not able to update customer specific fields even after passing the fields as per specification in Function module documentation. I have also created an implementation of BADI as per below specification in FM documentation:
Procedure for Filling Standard Enhancements
Before you call the BAPI for each object that is to be created or changed,
for which you want to enter customer-specific table enhancement fields, add a
data record to the container ExtensionIn:
STRUCTURE: Name of the corresponding help structure
VALUEPART1: Key of the object + start of the data part
VALUEPART2-4: If required, the continuation of the data part
VALUPART1 to VALUPART4 are therefore filled consecutively, first with the
keys that identify the table rows and then with the values of the
customer-specific fields. By structuring the container in this way, it is
possible to transfer its content with one MOVE command to the structure of the
BAPI table extension.
Note that when objects are changed, all fields of the enhancements are
overwritten (as opposed to the standard fields, where only those fields for
which the respective update indicator is set are changed). Therefore, even if
you only want to change one field, all the fields that you transfer in
ExtensionIn must be filled.
Checks and Further Processing
Using the methods ...CREATE_EXIT1 or. ...CHANGE_EXIT1 of the BAdI
BAPIEXT_BUS2001, BAPIEXT_BUS2002, and BAPIEXT_BUS2054, you can check the entered
values (and/or carry out other checks).
In the BAdI's second method, you can program that the data transferred to the
BAPI is processed further (if you only want to transfer the fields of the CI
includes, no more action is required here).
But still i am unable to update fields though i am able to create WBS with rest of the fields except custom fields.
I am using attached code to achieve this.Do we need to code anything inside method create_exit1 or create_exit2 implementation for BADI or
Please help on priority

Hi Rahul,
First observation from your code is that i could not find the assignment for the field
GWA_WBS_EXTIN-STRUCTURE. I hope you are not filling this field, that could be one reason for failure. Try to do it and let us know if you still have the problem.
Br..
Dwaraka

JSF Table StyleClass issue for a specific Field inside the Table

Hi There,
Am having an issue of dynamically setting the styleClass for a specific field inside a DataTable. Here is how the JSF code is ..
<h:column>
<h:panelGrid id="column4" columns="1" cellpadding="0" cellspacing="0">
<h:inputText id="numberOfApps" value="#{row.submitNumber}" styleClass="#{row.customStyleClass}" maxlength="6" converter="MyNumberConverter" />
</h:panelGrid>
</h:column>
This Table has a specific column which has a input Text Box where user enter's data. This data will be validated in the bean where in after the validation if its exceeding a limit we should throw an error message and also highlight the field with a specific styleClass.
I am setting the StyleClass dynamically based on the User Input, so that I can display a highlited Error Field on the screen. Strangely enough, styleclass is getting set as expected for the first submit but doesnt show any styles for further submits. Even the existing style is getting removed from the second submit onwards. I am setting this "customStleClass" dynamic parameter as a Bean Property. Am sure these values are properly set coz to make sure I have put an h:output tag inside that table to display the customStyleClass values and they are getting set as expected but I see blank value for the class="" in the source of the Page.
Any help would be appreciated.
Thanks
Edited by: Lalith on Jan 14, 2008 10:23 AM

One option is you find the data element of that field GUID.
Now go to SE11 transaction and in data type put that data element and press where used list. In that select tables.
This will give you a list of tables where that field is used.
But again if there are lots of them it will be difficult to find.
The only option in that case is debug the extractor and find out.

Field status of a specific field in different FSGs

Hi experts
This refers to filed stutus of a specific field in PO item, how it is set (Mandatory/Optiona/Display) in different field status groups.
Is this can be read from any table. I would like to see which FSGs set with Optiona/Mandatory for the given field (ex: storage location)
thanks
ramSiva

Kindly check in the below configuration
"Materials Management>Purchasing>Purchase Order-->Define Screen Layout at Document Level",
Regards
Irfan

IMPORTANCE OF DELTA SPECIFIC FIELD

Similar Messages

Maybe you are looking for