ImportDataFile method works in Hyperion Studio but not in iHTML environent

Hi,
I want to read file to Section, while it works in studio:
var scriptVar = ActiveDocument.Sections.ImportDataFile(sectionName , 1);
but it does not in iHTML workspace. I think it can't find uploaded files to be imported, but how to get the proper path to the files?
Im importing text files to the same folder as bqy file.
regards,
Paul

I am not sure (never seen it myself) but at the very least I suppose the windows account which runs the core / reporting services must have access to the path you specify for the import. Try not to use a drivemapping but the full UNC. Good luck Detlev

Similar Messages

Scrolling Header works in Visual Studio but not on Report Server 2008

2008 R2 Reporting Services. My scrolling header works in Visual Studio but not when deployed to the Report Server and viewed in IE 9. I have read most every post on this issue and can't find a solution. I have the fixed data properties
set correctly. Any suggestions?
Help appreciated!
Linda

Hi Linda,
As a suggestion, I would try to delete the deployed version and instead of deploying ther RDL file, i would try to upload the file and test it.
If the issue exisit, then I would download the exisiting version from the reportserver and compare the xml versions of the two reports and check if the propoerty is getting over written while deploying.
HTH,
Ram
Please vote as helpful or mark as answer, if it helps

SSIS package works in Visual Studio but not as a scheduled Job.

I have a SSIS package that takes some CSVs and Excel documents and imports the data into a database. The CSVs and Excel document come from outside agencies so I have no control over them. I have successfully created and ran the SSIS package in
BIDS (Visual Studio) However, when I try to run it as a scheduled job on the SQL server I get the following error.
Source: Import Brazos CSV data Brazos Co CSV [1] Description: Data conversion failed. The data conversion for column "offDescription" returned status value 4 and status text "Text was truncated or one or more characters had no
match in the target code page."
The column is set to ignore on truncation in the data flow source.
Any suggestions would be appreciated.
Thanks
KJ
Kevin Joyner

Hi Kjoyner96,
The error usually occurs due to the data conversion between non-Unicode and Unicode characters. According to your description, the data type of the Output Columns of the Flat File Source should be DT_STR. If the source flat file uses Unicode encoding and
contains Unicode characters, the data conversion from DT_WSTR to DT_STR will fail. So, I guess the source file in your Dev environment doesn’t have Unicode characters, while the source file on the SSIS server has Unicode characters. If this is the case, open
the Advanced Editor for the Flat File Source, switch to the Input and Output Columns Properties tab, and change the data type of the Output columns from DT_STR to DT_WSTR. In this condition, the Data Conversion Transformation is not necessary.
Regards,
Mike Yin
TechNet Community Support

URGENT: Rest web service with get method works fine in browser but not with java client(Android)

Hi ,
I have created one REST web service which accepts two parameters send back JSON results.
I tested the it in browser with URL as http://+Inteernal server+/ords/utimes/login_info?p1=+first_param+&p2=+second_para+
Web service URL : http://+Inteernal server+/ords/utimes/login_info?p1={p1}&p2={p2}
But when java team wants to access it from java code it gives error as "400- Bad Request".
one more IMP thing : when I test it in RESTful web service by using "set bind variable" , it only set value of first parameter.
APEX version : 4.2
Database : 11g (XE)
ords : 2.0.8
please help me ASAP.
regards,
Nagesh Patil

Hi Pragya,
thank you for the update.
Another question: could you please give us any reference about these corrections you told about? Maybe they could be relevant in our case too.
Our raised incident number is: 3100851983
Kind regards,
Davide

Is it possible http connection work well in simulator but not in mobile?

i am developing database three tier client/server application.
i want to connect mobile application to databse server via servlet page using tomcat server.
my code is working well in java wireless toolkit and it can download and upload data using my servlet page in which i had used JDBC connectivity but when i am installing same JAR file into Nokia 6030 it will gives me error like java.io.IOException: error in http operation. i had used this code to establish connectivityhcon = (HttpConnection)Connector.open(url, 3);
hcon.setRequestMethod(HttpConnection.POST);
hcon.setRequestProperty( "User-Agent","Profile/MIDP-2.0, Configuration/CLDC-1.0");
hcon.setRequestProperty("Content-Language","en-US");
hcon.setRequestProperty( "Content-Type", "application/x-www-form-urlencoded" );
dos = (DataOutputStream)hcon.openDataOutputStream();
byte abyte0[] = data.getBytes();
dos.write(abyte0);
dos.flush();
dis = (DataInputStream)hcon.openDataInputStream();
while((ch = dis.read()) != -1)
           response = response+(char)ch;
if(hcon.getResponseCode()==200 && !response.equals("ERROR"))
     setData(response);
else
     errorAlert("Server Error","Server can not handle your request at this time, Error msg : " + response);in this code i am sending data to server at url where i have used servlet post method this method work well in simulator but when i m instaling this program into deveice request generated from mobile didn't came to servlet.
whe i am browsing same page's get method through WAP in mobile it is working but thruogh application not connecting.
is there any more setting require to browse url via application like in Accesspoint proxy server of provider or i need to change code?.
If anybody having the solution then please send me.
thanx .
jasmit vala.
[email protected]

Hi,
I am also facing the same problem?
Have u got any solution?
pls let me know
its urgent
thanx in adv.
Regards,
Raj

Dynamic properties working in "normal KM" but not in XML forms

Hi all,
(EP 6.0 SP13)
I've implemented a Metadata Extension that returns a list of properties. The list is dynamically generated based on the folder the document is located in. I've tested the Metada Extension on both existing documents and new documents and it works fine in "normal" KM scenarios ( Word documents, file uploads, etc.).
The problem arises when I want to use these Dynamic properties in XML forms. I've added my property to a combox in the XML Forms project. When accessing the Metadata Extension from XML forms the resource path is always null. Since all my business logic is based on knowing where in the KM structure the document is, I have a small problem...
If I go to Details->Properties on the xml forms document and accesses my property there, the path is correct..
To get the resource path I use these two methods:
folder = metaContext.getResourcePath();
(for newly created documents)
folder = metaContext.getResource().getParentCollection().getRID().getPath();
(for existing documents)
these are null when calling my Metadata Extension from a XML Form.
Any ideas?
Vegard

Hi Vegard,
Could you post the code that loads/create the property objects dynamically?
Maybe you can post it at this forum Dynamic properties working in "normal KM" but not in XML forms
so I can award you some points.
Thanks in advanced,
André

Flex mobile 4.6 app works inside flash builder but not in android emulator

Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
Before I get in to many details of the view are there any categorical gotchas that can be causing this?
I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
Thanks for your help in advance.
Comment Added:
I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?

Thanks er453r,
I have created a project that clearly reproduces the bug. Here are the steps:
1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
2) Load it
3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator. The former works with an http status 200. The latter gives you an ioerror 2032. I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
I see a certificate exception in adb logcat but not sure if it's related...
Here is the self contained View code which works with a TabbedViewNavigatorApplication:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    xmlns:ns1="*"
                    xmlns:local="*"
                    creationComplete="windowedapplication1_creationCompleteHandler(event) "
                    actionBarVisible="true" tabBarVisible="true">
          <fx:Script>
                    <![CDATA[
                              import mx.events.FlexEvent;
                              protected var requestTokenUrl:String = "https://www.google.com";
                              protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
                                        var loader:URLLoader = new URLLoader();
                                        loader.addEventListener(ErrorEvent.ERROR, onError);
                                        loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
                                        loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
                                        loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
                                        loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
                                        var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
                                        loader.load(urlRequest);
                              protected function requestTokenHandler(event:Event):void
                              protected function httpResponse(event:HTTPStatusEvent):void
                                        label.text += event.status;
                                        // TODO Auto-generated method stub
                              private function completeHandler(event:Event):void {
                                        label.text += event.toString();
                                        trace("completeHandler data: " + event.currentTarget.data);
                              private function openHandler(event:Event):void {
                                        label.text += event.toString();
                                        trace("openHandler: " + event);
                              private function onError(event:ErrorEvent):void {
                                        label.text += event.toString();
                                        trace("onError: " + event.type);
                              private function onAsyncError(event:AsyncErrorEvent):void {
                                        label.text += event.toString();
                                        trace("onAsyncError: " + event);
                              private function onNetStatus(event:NetStatusEvent):void {
                                        label.text += event.toString();
                                        trace("onNetStatus: " + event);
                              private function progressHandler(event:ProgressEvent):void {
                                        label.text += event.toString();
                                        trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
                              private function securityErrorHandler(event:SecurityErrorEvent):void {
                                        label.text += event.toString();
                                        trace("securityErrorHandler: " + event);
                              private function httpStatusHandler(event:HTTPStatusEvent):void {
                                        label.text += event.toString();
                                        //label.text += event.responseHeaders.toString();
                                        trace("httpStatusHandler: " + event);
                              private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
                                        label.text += event.toString();
                                        trace("httpStatusHandler: " + event);
                              private function ioErrorHandler(event:IOErrorEvent):void {
                                        label.text += event.toString();
                                        label.text += event.text;
                                        trace("ioErrorHandler: " + event);
                    ]]>
          </fx:Script>
          <fx:Declarations>
                    
          </fx:Declarations>
          <s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
</s:View>

Trouble playing .swf - works offline in browser but not online on website

Hi there,
I'm having trouble displaying a flash .swf file properly on my website: http://dreamriderproductions.com/fun/game-test/
When I view the .swf file locally on Chrome, I get a text box to enter my name and I can click Go and keep playing the game. For some reason, when it's up on the website, there's no text box so I can't progress. Can you?
Background: The game did used to connect to a database, but the upgrade of our website (and relocation of the swf) seems to have broken the database connection. People couldn't progress past the first screen presumable because the information on which city they were in couldn't be submitted to the database. We've got a version of the game with the database connection disabled and so the game should now work - it works locally for me but not on the website!
Any ideas?
Thanks
Sion

The code you have posted is not the same code as used in:
<div id="gallery">
in the link above.
The reason that the Flash is not displaying in FF is that the portion of the code used by FF was omitted. The code currently used on the page only works in IE.
I'm no great fan of the IE conditional statements used in the code you posted so I don't blame you for not using it. But you do need to provide something for FF.... the old, out dated method would be to add and <embed> for FF... here's the newer method..
So either use code you posted above or better yet, get rid of that and replace the current <object> with
<div id="gallery">
<object id="FlashID" data="flash/201.swf" type="application/x-shockwave-flash" width="958" height="242">
   <param name="movie" value="flash/201.swf">
   <param name="quality" value="high" />
     <param name="wmode" value="opaque" />
     <param name="swfversion" value="6.0.65.0"/>
</object>
</div>
Give that a try. Will work in both FF and newer IE versions.
Best wishes,
Adninjastrator

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Site works in the app, but not in the browser.

Hello iWeb experts,
I've got problems.
Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
Two issues...
FONTS
I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
FUNCTIONS
Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
• The type in one nav link appears smaller than all the rest.
• Some links are active, others are not.
• Rollover highlighting works on some links, but not others.
• Most of the rollover links appear in the proper static color, a few do not.
I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
Any thoughts, suggestions on these two issues? Thanks much for any advice.
John
PS - For reference, see: www.johnrunk.com

Fascinating, Kirk (+he types with one raised eyebrow+).
QuickTimeKirk wrote:
When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
QuickTimeKirk wrote:
Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
Thanks, QTK. I truly appreciate your troubleshooting here.
John

Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Try here > http://support.apple.com/kb/TS1538

HT5787 How can I change an old email to a new one? For some reason my old email comes up on my iPhone - and I don't get access to change to my new email which I have on my iCloud account on my pc. My AppleID works on my pc, but not on my iPhone!

How can I change an old email adress on my iCloud accout to my new email (the same as on my pc), as long as my Apple ID works on my pc but not on my iPhone?
Br
Finn

You would have to change it back to your old email address in order to turn off "Find My iPhone" on your devices. After you changed it back to your old address and deactivated "Find My iPhone" (activation lock) you could change your Apple ID to your new address again. Now it should wok on all your devices.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help.
It works fine through my macbook, can't find anything in settings on iphone to resolve problem

The headset has to have A2DP capability, which most (I believe) do not.
http://en.wikipedia.org/wiki/Bluetooth_profile

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

ImportDataFile method works in Hyperion Studio but not in iHTML environent

Similar Messages

Maybe you are looking for