SSIS package works in Visual Studio but not as a scheduled Job.

I have a SSIS package that takes some CSVs and Excel documents and imports the data into a database. The CSVs and Excel document come from outside agencies so I have no control over them. I have successfully created and ran the SSIS package in
BIDS (Visual Studio) However, when I try to run it as a scheduled job on the SQL server I get the following error.
Source: Import Brazos CSV data Brazos Co CSV [1] Description: Data conversion failed. The data conversion for column "offDescription" returned status value 4 and status text "Text was truncated or one or more characters had no
match in the target code page."
The column is set to ignore on truncation in the data flow source.
Any suggestions would be appreciated.
Thanks
KJ
Kevin Joyner

Hi Kjoyner96,
The error usually occurs due to the data conversion between non-Unicode and Unicode characters. According to your description, the data type of the Output Columns of the Flat File Source should be DT_STR. If the source flat file uses Unicode encoding and
contains Unicode characters, the data conversion from DT_WSTR to DT_STR will fail. So, I guess the source file in your Dev environment doesn’t have Unicode characters, while the source file on the SSIS server has Unicode characters. If this is the case, open
the Advanced Editor for the Flat File Source, switch to the Input and Output Columns Properties tab, and change the data type of the Output columns from DT_STR to DT_WSTR. In this condition, the Data Conversion Transformation is not necessary.
Regards,
Mike Yin
TechNet Community Support

Similar Messages

Scrolling Header works in Visual Studio but not on Report Server 2008

2008 R2 Reporting Services. My scrolling header works in Visual Studio but not when deployed to the Report Server and viewed in IE 9. I have read most every post on this issue and can't find a solution. I have the fixed data properties
set correctly. Any suggestions?
Help appreciated!
Linda

Hi Linda,
As a suggestion, I would try to delete the deployed version and instead of deploying ther RDL file, i would try to upload the file and test it.
If the issue exisit, then I would download the exisiting version from the reportserver and compare the xml versions of the two reports and check if the propoerty is getting over written while deploying.
HTH,
Ram
Please vote as helpful or mark as answer, if it helps

SSIS package works in development environment but fails when job scheduler executes, file path invalid

SIS package works in development environment but fails when job scheduler executes, file path invalid
Relatively simple package to get OLE-DB connection to MS FoxPro 9.0 DB
The failure in the job log states that the path is invalid its a network path (\\192.168.1.xxx\foldername) this has been run several ways with the remote computer being mapped as a network drive and through the \\ notation described above.
Thinking it was a security issue between the SQL agent account and my account I tested by subsitution myself as a proxy account for the agent when running this job, again same result failed on network path.
One issue I see is that the remote computer is running Server 2000 (legacy software incompatable with newer versions)
Is it possible that this is a security issue, since if i understand correctly the current MS domain security model didn't exist until Server 2003.

Hi REIData,
Have you got the issue resolved? Based on your description, please make sure the target folder is shared properly. If the computer on which the SQL Server Agent job runs doesn’t join the domain as the server that hosts the shared folder, you have to share
the folder with everyone by adding “Everyone” to the people list on the File Sharing page of the folder and assign "Read/Write" permission to it.
Regards,
Mike Yin
TechNet Community Support

How do I load an SSIS package created in Visual Studio 2012 Shell (Integrated) onto SQL Server 2012 using SQL Management Studio 2012

I am fairly new to this whole process of working with the Microsoft development environment. Here is what I have to work with:
an NT server running Microsoft SQL 2012 - Microsoft SQL Server Standard (64-bit) 11.0.2100.60
and on my laptop (all freebie downloads):
SQL Server Management Studio 2012 ver 11.0.2100.60
Visual Studio 2012 Express for Desktop Development and
Visual Studio 2012 Shell (Integrated)
I was able to create an SSIS package in
2012 Shell (Integrated). It takes a flat file and imports it into an SQL database table. It runs successfully from within the
2012 Shell (Integrated) envrionment.
But I am having trouble figuring out how to set this up on the 2012 SQL Server. I see that one of my colleagues created an Integration Services Catalog,
and using SQL Management Studio I was able to create a folder under that called DigLic. But when I go to the Projects subfolder of DigLic and attempt to import my SSIS package, I get an error message:
"To launch the Integration Services Deployment wizard, one of the components: Integration Services, Management Tools - Basic or Business Intelligence Development Studio has to be installed by the SQL Server
2012 Standard, Enterprise, Developer, or Evaluation Edition. To install a component, run SQL Server Setup and Select the component name"
I realize that Express Versions of Visual Studio lack the full feature set of a professional version. But am I wrong in assuming that owning a server version of SQL Server 2012 gives us license to a professional
version of SQL Management Studio 2012? If so, how would I go about getting this software component installed? And I am not clear if this is something that needs to be installed on our SQL Server or if I simply need a professional version of SSMS
loaded on my laptop.
I work for a company that is fairly fractured in its repsonsibilities, so I would need to know exactly what to ask for if I need to track down any licenses that I might need and if I need to have any specific software installed on our SQL server or on my
laptop.
All helpt would be greatly appreciated.
Thanks!

Arthur,
Thank you for your reply. But at this point, one of my points of confusion is what software I have available to me. I wish I had a useful central help desk to call up and just say, "Hey, load me up with all of the professional version(s) of Visual
Studio. But I do not know what we have license to. And I kind of need to know what the options are, so that I can ask a specific question of our vast buracracy.
For now, I have downloaded only free versions of Visual Studio client software. Since my company does have servers running Microsoft SQL Server, I am going to assume that we have proper licensing for those servers. But does that server license
allow me to get any professional versions of the PC client software for the various Visual Studio(s) 2012?
And if I get a professional version of Visual Studio 2012, does that do away with the three different flavors that I have right now? I have 2012 versions of SQL Server Management Studio, Visual Studio Express, and Visual Studio Shell (Integrated).
Your feedback is much appreciated.
Thanks!

Unable to Open Script task in SSIS packages in Microsoft visual studio

TITLE: Microsoft Visual Studio
The task with the name "Map Network Drive" and the creation name "Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptTask, Microsoft.SqlServer.ScriptTask, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" is not registered
for use on this computer.
Contact Information:
Script Task
BUTTONS:
OK

Hi Covaikumar,
The issue may occur because the Script Task is not installed properly. Please check whether the Microsoft.SqlServer.ScriptTask.dll file exists in the following folders (supposing it is a 64-bit platform):
C:\Program Files\Microsoft SQL Server\110\DTS\Tasks
C:\Program Files (x86)\Microsoft SQL Server\110\DTS\Tasks
C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.ScriptTask\v4.0_11.0.0.0__89845dcd8080cc91
If the Microsoft.SqlServer.ScriptTask.dll file is missing in any of the folders, copy one (from the other folders or a different working SSIS server) to the folder. Alternatively, you can also use the command line tool gacutil.exe to install the task assembly
into the global assembly cache (GAC).
Regards,
Mike Yin
TechNet Community Support

Report works on Visual Studio but don't on server

Hi everybody.
I'm using Reporting Server link created a report and the dataset uses a expression based query as we can see:
="SELECT a.bug_id AS Caso, c.name AS 'Nome Projeto', e.realname AS 'Atribuído a', b.version AS 'Versão', b.target_version AS 'Previsto para a versão', b.fixed_in_version AS 'Corrigido na versão', d.value AS RDI, CASE b.status WHEN 10 THEN
'Novo' WHEN 20 THEN 'Retorno' WHEN 30 THEN 'Admitido' WHEN 40 THEN 'Confirmado' WHEN 50 THEN 'Atribuído' WHEN 80 THEN 'Resolvido' WHEN 90 THEN 'Fechado' END AS status, FROM_UNIXTIME(last_updated, '%d-%m-%Y') AS DATA, CASE WHEN locate('.', c.name) THEN LEFT(c.name,
locate('.',c.name) - 1) ELSE c.name END AS ProjetoPai FROM mantis_bug_history_table a LEFT OUTER JOIN mantis_bug_table b ON a.bug_id = b.id LEFT OUTER JOIN mantis_project_table c ON b.project_id = c.id LEFT OUTER JOIN mantis_custom_field_string_table
d ON a.bug_id = d .bug_id, mantis_user_table e wHERE (b.handler_id = e.id OR b.handler_id = 0) AND LEFT(c.name, locate('.', c.name) - 1) IN ('" & join(Parameters!ProjetoPai.Value,"','") & "') AND c.name IN ('"
& join(Parameters!ProjetoFilho.Value,"','") & "') AND last_updated BETWEEN " & Parameters!Parameter1.Value & " AND " & Parameters!Parameter2.Value & " AND CASE '" & Parameters!Tipo.Value
& "' WHEN 'Todos' THEN (d.value LIKE '%RDI%' OR d.value LIKE '%RDP%' OR d.value LIKE '%TDR%') WHEN '%RDI%' THEN d.value LIKE '%RDI%' WHEN '%RDP%' THEN d.value LIKE '%RDP%' WHEN '%TDR%' THEN d.value LIKE '%TDR%' END and (b.target_version in ('"
& join(Parameters!PrevistoVersao.Value,"' , '") & "') or (b.target_version is null)) and (b.fixed_in_version in ('" & join(Parameters!EntregueVersao.Value,"' , '") & "') or (b.fixed_in_version is null)) GROUP
BY a.bug_id ORDER BY c.name ASC "
The report works great on Visual Studio preview but when I deploy the report, it doesn't work on server. When I click to generate the report based on parameters, it simply shows nothing.
Can anybody help?
Thanks a lot.

Hi Gabriel,
According to your description, it seems that the reason why you using expression based query is that you want to filter values from a multiple parameter. If in this case, I suggest you can refer to the following queries:
Change the query:
c.name IN ('" & join(Parameters!ProjetoFilho.Value,"','") & "') AND last_updated BETWEEN " & Parameters!Parameter1.Value & " AND " & Parameters!Parameter2.Value & "
To
c.name IN (@ProjetoFilho) AND last_updated BETWEEN @Parameter1 AND @Parameter2
We can use the above format to change the all query, then directly use T-SQL query as the dataset query. Deploy the report to report server to check the issue again.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Package working fine in SSDT but not in integration services catalog or sql job

Hi All
we have created a package which contains Project parameter , when we tried to run the package in SSDT it is working fine . we deployed the project to sql server and we want to test the package . we executed the package ( for testing purpose
we didnt refrenced Project parameter to any env variable ) from integration services catalog the package is getting success but the files are not moving ( deserved task in package ) , so i have created a job and run the package from the job ,, here
the files moved from stage 1 and stage 2 but from there it is not moving . do we missed any steps ?
Surendra Thota

Hi All
we have created a package which contains Project parameter , when we tried to run the package in SSDT it is working fine . we deployed the project to sql server and we want to test the package . we executed the package ( for testing purpose
we didnt refrenced Project parameter to any env variable ) from integration services catalog the package is getting success but the files are not moving ( deserved task in package ) , so i have created a job and run the package from the job ,, here
the files moved from stage 1 and stage 2 but from there it is not moving . do we missed any steps ?
Surendra Thota

ImportDataFile method works in Hyperion Studio but not in iHTML environent

Hi,
I want to read file to Section, while it works in studio:
var scriptVar = ActiveDocument.Sections.ImportDataFile(sectionName , 1);
but it does not in iHTML workspace. I think it can't find uploaded files to be imported, but how to get the proper path to the files?
Im importing text files to the same folder as bqy file.
regards,
Paul

I am not sure (never seen it myself) but at the very least I suppose the windows account which runs the core / reporting services must have access to the path you specify for the import. Try not to use a drivemapping but the full UNC. Good luck Detlev

Applets work under older compilers, but not newest

The applets I compile using the latest release of javac (with the JDK 1.4 package) work in the appletviewer but not in IE 6.0. However, if I use an older version of javac from a couple years ago (not sure the version), the applets work in IE suddenly. Is there something I need to install in IE to make it compatible with the Sun 1.4 javac compiler? Should I just reinstall the JRE? Has anyone heard of this before? Thanks!!

You could try installing the Java 1.4 plugin.
http://java.sun.com/getjava/

SSIS package works from server only

Hi,
Setup (three servers involved - all have the same basic setup):
OS: Windows Server 2012 R2 (X64)
DB: Microsoft SQL SErver 2012 - 11.0.5532.0 (X64)
Short description
Executing SSIS package from Server B fails when not logged on via Remote Desktop.
Using same administrator userid on all servers.
Should read flat file from Server C.
Details
I have developed a SSIS package on Server A (yes, I use a server as developer pc!). The SSIS package needs to read a flat file from server C. This works perfectly in my Visual Studio 2012 environment.
I now deploy the package to server B. Now the fun begins:
- If I log on to server B via Remote Desktop and opens MS Sql Server Management Studio (MSSMS) and then executes the job directly from my Integration Services Catalogs/SSISB... then it works like a charm.
- If I just open MSSMS from Server A and via MSSMS logs on to server B then the job fails! The error I receive is "Error: Flat File Source failed the pre-execute phase and returned error code 0xC020200E".
Going further down, I can see the error is "Access is denied".
The frustrating part is that I log on to the servers using the same userid
- my administrator id. Also the file it should read from Server C is shared to Everyone has Full access (yes, I just want it to work for a start... Then I can always increase the security later!)
Any ideas on how to solve this?

It is due to the propagation of the rights.
You need to run your package using a proxy. It is a special account, typically a service account (non-expiring password) and it should be a domain account (not local).
See how to set such an account as well from the SQL Server prospective:
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Visual Studio UI not refreshing

Hello,
I have downloaded webinstaller of Microsoft Visual Studio Ultimate 2013 32-bit (English) from dreamspark and installed it. However, after installation the UI of Visual Studio was not refreshing properly.
I had gray background, moving mouse over "hidden" items made them reappear if they had special effect while hovering, like bolding text. Also some links that are "hidden" in start page are still active -> if I hover my mouse on it,
the cursor will change. Resizing window will show everything as it supposed to but will still leave window "unactive". Clicking, writing etc does not update on my screen until I resize window again. Menus (File, Edit..) are working properly.
I uninstalled my Visual Studio and installed it again from image this time. It was working few times but now it is yet again unresponsive. I noticed that resizing the window will make it to refresh and show the content as it supposed to. I have also
tried to install Update 1, that didn't make any changes.
I have latest Windows updates. I have Windows 7 Pro SP1 x64. Visual Studio version: 12.0.30110.00 Update 1. .NET Framework 4.5.50938.
Any idea how to fix this?
(I am unable to add images or links, I will add some screenshots when my account is verified)

Hi,
Thank you for your detailed information, now I understand your issue.
I doubt whether there is anything wrong with your OS or user profile.
You may try the following steps to do a simple test:
1. Create a new user account and run VS. If you can run without problem. Your user profile is corrupt and you have to create a new account and copy current user info to it.
http://windows.microsoft.com/en-IN/windows7/fix-a-corrupted-user-profile It is for Win 7
2. Do some file check or repair on your OS. Such as Sfc /scannow http://support.microsoft.com/kb/929833 The same problem.
If possible, I recommend cleaning your OS and reinstall VS to check the result.
And as I know recently some Windows Updates caused any issues in VS2010. In order to check whether they can cause your issue, please uninstall related updates such as KB2898869 if you have them to check whether it can help:
http://visualstudioextensions.vlasovstudio.com/2014/02/13/visual-studio-2010-macros-stop-working-after-february-2014-windows-update/
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
@Crystal Zhu
I checked and THOROUGHLY read the link about fixing a corrupt user profile and it fixed my VS 2013 problem, however, I cannot seem to copy any of my data from my first (corrupt) profile to my second and fresh user profile. I have also tried another way of
doing this but I get the same outcome.
It seems as if, when I select all my files in the C:\Users\My Profile section, it will copy to clipboard yet, it says it can paste but when I attempt to paste, it does not let me, or at least does not seem to be pasting. Nothing changes or occurs. Could
this be a win 8.1 security feature? (Windows 8.1 is my current running OS). Please answer or quote with help.
-Thanks, Whutchison
Whutchison

The Application Data folder for Visual Studio could not be created

Hi! My laptop was working fine but someone recently installed Malware Bytes to my laptop and supposedly found 4 problems and "fixed" them afterwards Visual Studio Professional 2013 and Chrome stopped launching. When I realized this happened I uninstalled
Malwarebytes but it was too late. Every time I tried launching Visual Studio I would get a message that said something like: "Two or more components could not be found. Please reinstall". I did a "fix" on Visual Studio but this solved nothing
only changed the message, the new message was "The Application Data folder for Visual Studio could not be created" so I uninstalled the program and all the extras I found on my Control Panel. Downloaded Visual Studio Community 2013 I'm trying to
install it but I got the same exact message again. Why is this happening? What does it mean? Before I uninstalled Visual Studio Professional 2013 I looked for ways others solved it but nothing seemed to work. Please help. Thanks!

Hello Danny,
The Malware Bytes may have already modified some files/registry values/environment variable which is used by Visual Studio and may be the setup cannot create it for you again.
Please try the workaround here in this blog:http://tutewall.com/application-data-folder-for-visual-studio-could-not-be-created/ and remember to backup your
registry key before you do any actions to the registry table.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I-pod touch works on a Mac but not a PC

Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!

I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
I was wondering about that one in particular.
Try configuring you CA as per kalda01's instructions in this post:
http://discussions.apple.com/message.jspa?messageID=10525876#10525876
(Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.)

Flex mobile 4.6 app works inside flash builder but not in android emulator

Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
Before I get in to many details of the view are there any categorical gotchas that can be causing this?
I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
Thanks for your help in advance.
Comment Added:
I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?

Thanks er453r,
I have created a project that clearly reproduces the bug. Here are the steps:
1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
2) Load it
3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator. The former works with an http status 200. The latter gives you an ioerror 2032. I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
I see a certificate exception in adb logcat but not sure if it's related...
Here is the self contained View code which works with a TabbedViewNavigatorApplication:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    xmlns:ns1="*"
                    xmlns:local="*"
                    creationComplete="windowedapplication1_creationCompleteHandler(event) "
                    actionBarVisible="true" tabBarVisible="true">
          <fx:Script>
                    <![CDATA[
                              import mx.events.FlexEvent;
                              protected var requestTokenUrl:String = "https://www.google.com";
                              protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
                                        var loader:URLLoader = new URLLoader();
                                        loader.addEventListener(ErrorEvent.ERROR, onError);
                                        loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
                                        loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
                                        loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
                                        loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
                                        var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
                                        loader.load(urlRequest);
                              protected function requestTokenHandler(event:Event):void
                              protected function httpResponse(event:HTTPStatusEvent):void
                                        label.text += event.status;
                                        // TODO Auto-generated method stub
                              private function completeHandler(event:Event):void {
                                        label.text += event.toString();
                                        trace("completeHandler data: " + event.currentTarget.data);
                              private function openHandler(event:Event):void {
                                        label.text += event.toString();
                                        trace("openHandler: " + event);
                              private function onError(event:ErrorEvent):void {
                                        label.text += event.toString();
                                        trace("onError: " + event.type);
                              private function onAsyncError(event:AsyncErrorEvent):void {
                                        label.text += event.toString();
                                        trace("onAsyncError: " + event);
                              private function onNetStatus(event:NetStatusEvent):void {
                                        label.text += event.toString();
                                        trace("onNetStatus: " + event);
                              private function progressHandler(event:ProgressEvent):void {
                                        label.text += event.toString();
                                        trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
                              private function securityErrorHandler(event:SecurityErrorEvent):void {
                                        label.text += event.toString();
                                        trace("securityErrorHandler: " + event);
                              private function httpStatusHandler(event:HTTPStatusEvent):void {
                                        label.text += event.toString();
                                        //label.text += event.responseHeaders.toString();
                                        trace("httpStatusHandler: " + event);
                              private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
                                        label.text += event.toString();
                                        trace("httpStatusHandler: " + event);
                              private function ioErrorHandler(event:IOErrorEvent):void {
                                        label.text += event.toString();
                                        label.text += event.text;
                                        trace("ioErrorHandler: " + event);
                    ]]>
          </fx:Script>
          <fx:Declarations>
                    
          </fx:Declarations>
          <s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
</s:View>

Generated WSDL doesn't work in Visual Studio

After an update of SAP we have some problems with our web service (WSDL).
First of all we created a webservice using SE80. The generated WSDL url mentioned in SE80 doesn't work in visual studio which is in our opinion weird. When we use the url from the SOAMANAGER "Open WSDL document for selected binding" in visual studio we get a little bit further but it still doesn't work. The problem seems to be the "parameter(s)" with or without "s". Does anyone know how we can generated a WSDL with only "parameters"?
ExampleWSDL:
<wsdl:message name="ZPIQ_GET_LEERWEGResponse">
<wsdl:part name="parameter" element="tns:ZPIQ_GET_LEERWEGResponse"/>
</wsdl:message>
u2212
<wsdl:message name="ZPIQ_GET_NATIO">
<wsdl:part name="parameters" element="tns:ZPIQ_GET_NATIO"/>
</wsdl:message>
SAP ECC 6.0
SAPKA70014
SAPKB70014
SAPKW70015

Hi Ralph,
In order to consume SAP services in Microsoft Visual Studio .NET, you need to convert WSDL from SAP (Document style) to Microsoft (RPC style) standard. This conversion is transparent to you, if you use [ES Explorer for .NET|https://www.sdn.sap.com/irj/sdn/dotnet?rid=/library/uuid/c0319dc4-d76d-2a10-d19f-e4f4ff315bde].
Best Regards,
Rima.

SSIS package works in Visual Studio but not as a scheduled Job.

Similar Messages

Maybe you are looking for