Imported Clips boundaries shift

Imported digital clips from camera (firewire) do not end where the 'end-of-clip" markers indicate they should. Imported clips contain video from the following clip, usually 1 sec: 26 frames. This is a new problem with iMovie HD (v.6); problem did exist with v.4 or 5.

You could Zip them into an archive. They compress somewhat. Or Stuffit will allow you to segment an archive into 4.7 GB segments...
Patrick

Similar Messages

Difficulty importing clips recorded in "pre-rec" mode on the Panasonic SD5

Anyone have this issue? I couldn't find any topics on this.
iMovie 08 cannot import clips that I've recorded in the SD5's pre-rec mode. The clips just show up as a grey film strip in the import window. The clips recorded with pre-rec mode OFF show up fine and import fine.
Thanks!
-MP

The way Pre-Rec mode is supposed to work...The camera is on and taking video. It always maintains the last three seconds in memory. When you hit "Record" (and shift into regular recording mode) you also have the last three seconds before you hit record.
This is so you don't miss anything while trying to hit the record button. Imagine trying to film the start of a race. You could hit record 20 seconds before the starting gun, just so you don't risk missing the start. With preview mode, the camera is on and has the last three seconds in memory. When you hear the starting gun, you would still have time to press RECORD and have the start of the race.
If you filmed a bunch of stuff in PRE REC (without hitting RECORD), my guess is that it is gone forever.

Importing clips from iMovie HD to FCE4

Hi. Have read with interest a couple of questions on this same issue, with the advice from Tom Wolsky seemingly being to not mix the two applications and just get stuck in with FCE. However, i'm finding FCE difficult to like/get to grips with. But more importantly, after attending some Apple onetoone sessions, it seems my Canon camcorder might be a little long in the tooth and there may be some tape slippage as I was getting time code errors when trying to import directly to FCE. The fix seemed to be to capture the footage via iMovie and import to FCE using 'show package contents' route. Having now though imported some footage from a second tape, I have some of the clips showing as Offline for some reason. Is the trick to import clips from IMovie as per Tom's suggested route on 9/8/08?

I import video from my camera into iMovie 4, because that is the last version of iMovie, I believe, that was capable of flushing unwanted video off the hard drive, and I can bring an entire tape into iMovie, trim it down for FCE, and then get rid of the unwanted footage. iMovie 6, like Final Cut Express, is a nondestructive editor and can't erase unwanted footage from the hard drive, and as you know, video uses up hard drive space FAST. To get rid of discarded edits, you either have to use iMovie 4 or Final Cut Pro.
iMovie is also much easier to import video into than Final Cut Express, with all the latter's complicated controls. With iMovie, you just plug in your camera, iMovie then says "Camera Connected," and you hit Play and Import. Stone simple. Also, in iMovie you can hear the audio as it comes in, and if I remember right (it's been a while since I did it in FCE), you can't hear your audio tracks as your video imports into FCE. Not a big deal, but an annoyance.
Once the video is in iMovie, then I cut and trim the video to get rid of all substandard/unwanted stuff, and then Empty Trash, which erases the unwanted video off the hard drive, saving mucho space over the course of a project. Otherwise, you're just stuck with the unwanted video, and all it does is fill up your hard drive. Then you export (or "Share," in iMovie parlance) your video from iMove as a QuickTime movie, and drop that QT movie into Final Cut Express's Browser. Then create your FCE project from it.
The only objection I have ever seen to this procedure is people complaining that their QuickTime movie from iMovie has to be rendered in FCE before FCE can use it, and this takes a bit of extra time. Well, that's true, unless you export your video from iMovie in a form that FCE can use natively. Then it doesn't need to be rendered at all--it's just as though you had imported it from the camera directly into FCE. Most people don't know how to set up iMovie to do that.
Here's how I do it: (this is iMovie 4; I assume other versions are the same), Select Share > QuickTime and choose Expert Settings. On the next screen, select Export: Movie to QuickTime Movie, and click the Options button. In the Movie Settings window that this brings up, on the upper (video) part of it, under the Video checkbox, click the Settings button there, and for Compression Type choose DV/DVCPRO-NTSC, and under Compressor Quality, move the slider to Best, and click OK. Under the Sound checkbox, click Settings, and then choose Linear PCM, Stereo, and 48.000 kHz for Sound Settings. Under Render Settings, choose Qualty: Best. Just below that, uncheck the "Prepare for Internet Streaming" box. Then click OK, and the window will go away, and you're ready to export.
Give the video a name, and a place to save to, then click SAVE. The QuickTime movie that results from this can be dropped straight into FCE and requires no rendering; it works just as though you had imported it directly into FCE from your camera.
Tom B.

Importing clips from iMovie - jittery

Just got Final Cut Pro 5 and I'm having a problem with importing clips from iMovie into FCP5. The clips were fine in iMovie, but the images are jittery in FCP. I tried Apple Care, but they wanted to charge me $200 to answer my question eventhough I just bought the software yesterday!
any ideas most welcome - thanks

Nowhere is it advertised that iMovie is compatible with FCP.
One is a consumer format, with less features, like lack of timecode. The other is a professional format, which relies heavily on timecode.
Yes, output to tape from imovie, then capture with FCP.
#20 Using iMovie to Capture for FCP edit
Shane's Stock Answer #20:
iMovie handles the media differently from FCP, specifically where audio is concerned. So it is not a recommended workflow. Here's why...
iMovie captures using DV Stream (.dv) standard which does not use timecode. That is a big disadvantage over the way that FCP captures in that you can't go back and recapture the material at a later date if you need to revisit a project.
The DV/NTSC specification (the one FCP uses) also calls for seperate tracks for audio and video, even if you capture it as one clip. iMovie' DV stream format is muxed audio and video, which means that they are tied together (I can't get into specifics because I ain't no engineer or programmer). FCP is a bit more demanding and captures the seperate audio/video tracks, either in a single media file or as seperate video and audio files. With FCP you could capture video only or audio only because each is defined by the DV specs. while with iMovie you can't.
Also, if you drop the iMovie footage into the timeline, your will get the RED render bar forcing you to render the footage in order to see it...
"There's no need to fear, UNDERDOG is here!"

Suddenly my event library in iMovie 11 is empty. I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion. Help??

Suddenly my event library in iMovie 11 is empty. I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion.
I was working on a project, when all of a sudden the event library went blank. There are no devices showing in the left column, only "last import" and "aperture videos". There are no video clips in the editing window. I have "Show: All Clips" selected. I've tried "group events by disk".
When I have a Project open, it plays just fine. There are no yellow triangles saying "source clip is missing". Yet, again...nothing is in the event library large editing window. So, it seems the data is still there, but invisible. This is true with all the projects, and all the external devices I've experimented by plugging in to see if their video clips show up in the event library.
I have tried to import new movies, and iMovie responds as normal...looking like it's importing, then "generating thumbnails", then it makes the "ding" signalling that the import is complete...but nothing shows in the event library. I've tried importing movies from the harddrive, from quicktime, and from an external drive.
I have searched the forums, and found many users with a similar, but not the same, problem. For them, it seems the "go to users-library-preferences and delete iMovie plist" has solved their problem. This didn't work for me.
I uninstalled/reinstalled iMovie, I even have re-installed Mountain Lion (from a last-ditch effort suggestion from Apple technician).
HERE'S AN INTERESTING DETAIL: After almost 5 hours on the phone with Apple, I decided to cut my losses and take my project to another Mac I have. I'm working on a project, for work, that is critical that it's completed by tonight (whoops), and all my video is on an external drive. So, I plug in the external drive to Mac #2, open iMovie, and everything is looking fine. I continue importing some files I was converting, through Wondershare, and suddenly (whether or not this has to do with the importing, I'm not sure), the SAME THING happened to Mac #2!!!! I can't believe this.
Does anyone have any suggestions? Have you ever heard of this happening? Could it have to do with the files I'm importing???
I apologize if my language is confusing. Obviously, I'm not an Apple genius-person! I hope I've provided all the information you need.
Mac #1 is a 27" desktop, mid-2012, software up-to-date. Mac #2 is a 24" desktop, about 4 years old, OSX 10.7.5

I'm adding more information:
in Finder, my iMovie folders are all visible and accessible. When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip. ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.

Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01

Can't open sequences or import clips - File format not supported

We have an iMac workstation here running Premiere that will not open projects or import clips. Here's the sequence of events that led to this:
1. Premiere was locking up on the splash screen whenever it got to "ImporterQuicktime.bundle". I tried trashing preferences and launching with plug-ins disabled and received the same freeze. Based on forum recommendations I removed "ImporterQuicktime.bundle" and "ExporterQuickTimeHost.bundle" from the plug-ins folder inside the package. The software launched fine - but none of the Quicktime files in the project were working. So I then took copies of the above 2 files from the iMac next to this one, with the exact same configuration, and pasted them into the plug-ins folder. Since then - launching the software has generated the below errors.
2. Attempting to open any project gives a long error that starts as: The preset used by one or more sequences in this project requires third-party components that could not be located.
3. Starting a new project and attempting to drag any Quicktime ProRes media into the project gives the error: File Format not supported.
I have trashed the preferences, re-installed the Pro Apps Quicktime Codecs, de-authorized the computer and re-authorized it, and upgraded Adobe Premiere from 7.0 to 7.2. None of which fixed the issue.
I'm thinking about trying a complete re-install of Premiere next. Any other ideas?
Here's the details:
Premiere Pro CC 7.2
Mac OS 10.8.5
iMac late 2012 model, 32Gb RAM, 2Gb video card
Thanks.
Don Hertz

I seem to have figured out a work around. It appears the 7.2 upgrade is making it so that our Quicktime XDCAM 422 clips are not properly recognized. Clips both currently in a project and new clip imports do not work. Attempting to import clips using this codec generates the error message: Unsupported format or damaged file. This has happened on both an iMac system running 10.8.5 OS and a Macbook Pro running 10.9.1 OS - both of which were upgraded to Premiere 7.2. In both cases - uninstalling and re-installing Premiere resolved the issue.
Don Hertz

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

No audio on import clips

Using iMovie 6.0.3 on my new Power Mac. Importing via firewire from Canon ZR500. No audio when I play imported clips. I can see audio wave after extracting. Speakers turned on. I can hear the audio sound affects and iTunes songs from the iMovie browser, but they don't play once placed in timeline.
What is up??
Using same camera I have no problem on my iBook G4

I think it is called " Video Play Through Camera ", Karsten.
Language barrier, I think.
no, it's called...
"Video eines DV-Projekts auf DV-Kamera anzeigen"
.. to be korrekt...
thanks, Sue, for correction.. indeed, I toggle between English and German interface, just to post here the correct terms.. I was sure, I remember right.. nope.. where are my pills...? the red ones.. are for the brain...

Importing clips and rotating video

Please help:
I am unable to import clips into my iMovie 6. I've used Photoshop and Graphic Converter to convert pics to JPEG(jpg). When they are imported they show up as nothing but a white blank with the titles below. Any suggestions? Should I use a different format or simply re-name the clip?
Additionally, I do not know how to rotate a video clip that was imported into iMovie to a correct orientation. What process do I follow to rotate the video clip clockwise or counterclock wise?
This is most frustrating and any help and guidance would be much appreciated.
G4 Sawtooth
120 G HD
1.4 RAM
1.2 Ghz processor
Thank you,
HmL

Well, it's easy. DVCAM, DVCPRO, mini dv video is on tape at NTSC 29.97 fps, no variances. So, your 35 mm film was telecined, a pulldown was added. Did you contact your lab about the telecine procedure?
There is no regular 24fps mode on the DVX. There is 24p and 24pa and these refer to progressive video shot at 23.976 fps with different pulldown cadences added to bring the video to NTSC 29.97 fps.
You need to select which timebase you want to edit in and then either leave the pulldown intact or process the video in Cinema tools to strip it.
There's a ton of info on this board about this issue as well as in the manual and on the web. Here's a good start http://www.adamwilt.com/24p/index.html

Huge file size when importing clips

When importing clips from my Sony Handycam (HDR TG3E) in HD 1920 X 1080 the file sizes get extremely large. A 10 minute clip results in a filesize (.mov) of approx 8 GB. Is this really meant to be? I use iMovie '08 v. 7.1.4.
Would appreciate any help in adjusting the software or hardware preferences resulting in smaller files.

for editing HiDEf, it gets automtically converted into some 'intermediate' codec, which has ~40-60GBs/h.
on export, these files will get 'shrunk' again..

I just updated iMovie to 10.0.2. while attempting to import clips from my camera every clip shows up in the window EXCEPT the one I want to download. Its on may camera but won't show up why?

i had just updated imovie to 10.0.2. While attempting to import clips from my camera the computer froze so I tried to eject the usb cord hooked to my camera. Even though it said it was OK to do so, when I pulled it out I got a message it was done prematurely. When I restarted the computer and tried to import again, evey clip shows up in the window EXCEPT the very one I want to import. I have no idea why and Ive tried everyting( restart, turn off, etc) nothing works. The wanted clip shows up fine on my camera but not in the imovie import window. please help

How much free space do you have on your hard drive?
LN

Imported clips are to big to burn to DVD can i cut them up w/ out having to

imported clips are to big to burn to DVD can i cut them up w/ out having to export them again as QT files. seems like too many steps. otherwise i have to import them as shorter clips....i was doing this for a friend so i just did a "capture now" didnt want to sit and log..but now clips are toooo BIG..over 4 gigs and now i cant burn them to a data DVD.
anyone???
e

You could Zip them into an archive. They compress somewhat. Or Stuffit will allow you to segment an archive into 4.7 GB segments...
Patrick

I can't view video on imported clips on FCPX, it shows blue instead of image

I can't view video on my imported clips on FCPX, it shows blue instead of image on the clip. I can hear sound but no video. What is the problem. I wish someone can help me on this issue? Thanks.

The camera is Sony Handycam HDR-CX550. I used the internal hard disc to record. I can's use MTS clips if it is recorded on the internal hard disc. I converted clips into MOV, MP4, and Final Cut formats, non of them worked on Final Cut Pro X. I tried to import the same clips on iMovie, it worked but super slow. MOV and MP4 formats used to work for FCPX, the only difference is I recorded the footage with HD 1920x1080.
The clip I imported showed as a blue thing with two rectagle shapes on it. I can hear the sound, but no video. I also imported my old clips with sam format, it worked. I tried a lot of things, no use.
By the way, what is spwecs?

Whenever I import clips it always says there is an error and my clips are not imported.

I plug my flip into my computer and then select the clips I want to import to make my movie...it imports a clip and then a message flashes and says "There was an error importing your clips please look over imported clips." But there are no clips too look over..what should I do?

mkelly2012,
Try watching this video tutorial and see if it applies to your version of the Flip camera:
How To Get Flip Video Footage In iMovie 08
http://youtu.be/4-LMhFHk-IM

Imported Clips boundaries shift

Similar Messages

Maybe you are looking for