Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?
Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?
Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.
Similar Messages
-
I would like to know if there is a way to add multiple borders to a single cell or selection of cells in one click. At this time, if i want to add for example a top border and a bottom border to a single cell I have to do this in two steps: first select the top border, style, thickness, and color, and then next select the bottom border, style, thickness, and color. Is there a way to select the top and bottom border of a cell in one click? Clicking on the top border then holding down the command key while selecting the bottom border does not work, nor does holding down the option key, the control key, or the shift key work. Thanks for your help.
Thank you for the suggestion but this did not work for my Mac. When a cell is selected for which I want borders, the entire cell is lit up. Then when I go to the border tool and select style, thickness, and color, the entire lit up cell takes on the border, that is the Outside Edges of the cell now have a border. So selecting the style, thickness, and color first doesn't work.
If I select the top border first (or any border), the drop down goes away and I can't select multiple borders - I get to choose one at a time. After selecting one border, style, thickness, and color, said border is now on the spreadsheet. Then I go back to the border selection and pick another border and the the previously selected style, thickness, and color reverts to null, so I start over with the new border style, thickness, and color. Yes, it is tedious.
The Fix would allow the user to select multiple borders, say left and right, before the drop down goes away after selecting only one border
Does it have something to do with Allow or Disallow border selection?
I have Numbers '09 version 2.1 (436) -
Is there a way to add multiple images at the same time to Keynote 6.0?
I just brought keynote after searching online about adding multiple images to a presentation all in one go - I couldn't do this on the powerpoint version I was using but there were multiple references on google to being able to do this on keynote. I purchased it and now can't get it to work! Any ideas anyone? Thanks
Do you mean like dragging in multiple images and having one image go on each slide? If so, you just drag the images into the Slide List on the left instead of onto the slide. From this prior post.
https://discussions.apple.com/message/9068283#9068283 -
Hi
I have troubles with imovie. It always needs a long time to open but now I have a new problem. I cannot upload video clips from my sony camera which worked before. I do not know how to solve this problem. Any suggestions?
Thanks.Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
Is there a way to delete multiple pictures at the same time from the iphone4s?
Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks
Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.
-
problem importing a large file from a Sony DR60 external drive to FCP. Never had a problem before first two shot clips are captured in log and transfer but the larger 2 hour clip only downloads the first few seconds. Any advice?
I can think of 2 things to check.
1. The Scratch disc has plenty of space.
2. System Settings>Scratch Disc does not have a restriction in the Limit Capture/Export File Size Segment To:
Al -
Re I-MOVIE. I am getting a "Communication Error" when I try and send a clip to the IMovie
program in my IMAC 2008 Intel Chip computer. This is the first time in 3 years that the
program has not worked. What has gone wrong?Hi
Have no idea - But if it is a new problem with exactly the same kind of material that was previously used. Then my trouble shooting guide might help.
If You
• used a new Camera - file codec might be a sort that don't work
• Your main hard disk might get too filled up
Else try
Trouble
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W -
Is there a way to select multiple clips in FCP 7 and make all of them stereo pair at the same time?
I know,.... I'm still using FCP 7, but since there are no forums for this aaplication anymore, I figured I ask it here.
I want to select multiple clips on the timeline and make them all stereo pair. I pressed "Option L", but that does not work. Is there a way to do this?
Thanks,
Lisahttps://discussions.apple.com/community/professional_applications/final_cut_stud io
Al -
Like, instead of clicking to pick the one you want, have 3 or 4 available on the toolbar all the time. I saw something called Thinger that does it, but that was from Firefox 3.
Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?
No. You can kind of do it by dragging from the Contacts app, but the default address (first in list, I think) will be used. I you have contacts with multiple email addresses, you’d have to go to each in the address field and select the correct one. -
AddressBook - Is there a way to change multiple addresses at the same time?
To be clear....I have 25 contacts at 1 company and that company moved.
Is there a way to link the cards together so that when I change the address on one card it automatically updates the other 24 cards?? Rather than having to change each contact individually, which is time consuming and annoying.
I have created a "Smart Group" for the company and all of the contacts place themselves in the group but it still won't sync the addresses.
Can someone tell me how to do this, if it's even possible? And if it's not, I really wish it was!!
Thanks!Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.
-
can this problem be fixed?
Unless you can retrieve the original credentials, it's no good.
http://support.apple.com/kb/PH13695 -
Log and transfer footage from Panasonic GH1 into FCE
I have already read the few threads discussing importing AVCHD video from the Panasonic GH1 camera into FCE. I was expecting that the 1080x24 (wrapped in 60i) would import OK but the 720x60p would not. However, so far, I have had both formats import using the log and transfer just fine. These have been only short clips roughly a minute or less in length but no sign of FCE crashing when importing the 60p footage.
So, is this considered normal or has something in the most recent OSX updates fixed this FCE capability?The program is usually able to ingest 24p and 60p footage fine, but upon exporting it will be conformed to the frame rate of your sequence. Since FCE doesn't support custom sequences all exported movies are either in 29.97fps or 25fps. Problems also sometimes arise where the program interprets your footage as 29.97fps instead of what it actually is, causing the audio to drift a bit as well.
Better to stick to what the program supports: 50i/25p and 60i/30p. If you need the functionality of 24p or 60p you should upgrade to Final Cut Pro. -
AVCHD Clips Showing Up Black in Log and Transfer Window
I'm doing some work for a client with some footage shot on a Sony NX5U. I'm trying to ingest the AVCHD clips into FCP 7.0.3 via the Log and Transfer window. I can pull up a list off all the clips in L&T and some of the clips work. Numerous other clips though, just show a black screen and have no audio. You cannot play the video in the preview window, although the box that shows the duration of each clip does show a time for each clip selected, so it must see something there. If I try to add any of the problem clips to the transfer queue, it tries for a few seconds to transfer the clip, then it gives the error with the red exclamation mark and stops. All the other clips transfer fine.
I'm fairly certain that the problem is something with FCP because I can load the same clips into adobe premiere without any issues. I can also watch all of the same files in VLC player, so the problem doesn't appear to be a corrupt file or anything of that sort. I've tried the same steps and had the same results with the files on a memory card and the files copied off to my hard drive. I did receive the memory card from the client and did not shoot the footage myself, so its possible that something was messed up on his end, but the file structure appears to all be in tact, as near as I can tell.
Here are a couple things I've already tried that didn't appear to help
--Trashing the preferences to FCP
--Switching the transfer codec from Apple Pro Res to AIC
--Changing the scratch disks from an external hard-drive to the internal drive
Any suggestions anyone could offer would be greatly appreciated! I have transferred footage off this camera before with no issues, so I'm not sure why it's having problems nowwe're all the files shot in the same format? Not all formats are compatible with fcp. If you can bring the files into premiere, you can use the adobe media encoder to convert to prores and then work with them in fcp. The interface on the adobe media encoder is not particularly intuitive at least in CS 5.5. I use it for this kind of thing every few months and every time I have to figure it out again. May be early onset alzheimers, but I don't think so.
-
In FCP-X is there a way to import AVCHD clips from an AVCHD file folder I have copied from my Canon hard disk camcorder to my iMac hard disk? With FCE I used log and transfer with no problem; but, FCP-X doesn't import them. It will import AIC files that have been created in FCE from the original AVCHD files. If FCP-X will not import these files directly from the copied AVCHD folder, is there a workaround using other software to convert the files? For example, Compressor? (Canon does not provide any AVCHD conversion software for OSX).
Hi jphil and Tom
I have exactly the same problem but the answer you (Tom) provided did not help in my case. Trying to "Import ->From Camera" and pointing to the AVCHD folder yields the error message: "(Folder) contains unsupported files or has invalid directory structure."
Folder structure is
AVCHD
BDMV
CLIPINF
.CPI files
Index.bdm
Movieobj.bdm
PLAYLIST
.MPL file
STREAM
.MTS files
AVF_INFO
3 files (.bnp, .inp, .int)
DCIM
101MSDCF
empty
MODELCFG.IND (file)
My question is: Is that not a "camera archive" of the type you talked about in the thread? Is it on principle not possible to import the files in that format/directory structure? If not, since the shots were not taken by myself, what should I ask the guy who shot the movies to give me to be able to work with them in FC?
I work with a brand new Final Cut Pro X 10.0.4 (still very clumsy with it) on an iMac 11,3 with MacOS 10.6.8.
I downloaded the latest version of codec updates from the Apple support site but no difference.
Thank you in advance
Giorgio
Freiburg, Germany -
Cant import using Log and Transfer to FCE 4.0.1 from Panasonic DMC-TZ10
Does anyone know if/how I can import into FCE 4.0.1 using Log and Transfer? I use Log and Transfer with my Sony HDR XR200VE Video Camera but when I try this with the Panasonic DMC-TZ10 I can play the clips in the Log and Transfer Clip viewer however they don't import after I add them to the queue. It just gives me an ! icon and gives up.
I guess I need to know if there is a combination of camera settings and Codecs I can choose that will allow me to successfully import into FCE 4.0.1 using Log and Transfer.
The settings I can choose on the DMC-TZ10 camera are the Rec Mode (Either AVCHD Lite (GPS Rec), AVCHD Lite, or Motion JPEG) and the Rec Quality SH, H or L).
iPhoto 09 and iMovie 09 will automatically import video from this camera if I choose Motion JPEG and H on the DMC-TZ10Log and transfer only supports AVCHD. It does not support AVCHD Lite, nor will it work with Motion JPEG media. You could use third party software to convert it, or iMovie and then export a QuickTime movie from there in the correct codec and format.
Maybe you are looking for
-
Error in creation of TDS Certificate.
Hi I am facing one problem in creation of TDS Certificate after successful creation of Remittance challan (j1inchln) and Bank challan updation(j1inbank). The error msg is as follows: "Please maintain entries in layout customizing:" When I an went s
-
How can i delete some books from ibook?
How can i delete some books from ibook? It says: this book can't be opened. The book is corrupt. I can't open and I can't delete it
-
ACPI error while installing on Dell Dimension
Try to install Solaris 8 on Dell Dimension 4100, right after starting from CD rom, system reported: Sun Secondary Boot Version 3.00 Warning : ACPI Tables not in Reclaim Memory prom_panic:kmem_free block already free I try to continue and was told to
-
Hi everyone, I am a really new at trying to call COM from VBA. Here is what I've done. a) I creates a Class Library in C# with a really simple method. b) I created a tlb and snk file using sn.exe, gacutil.exe, regasm.exe. I checked that my class is l
-
Pointing ItunesU.class to a cgi-bin directory.
Our school is setting up an ITuneU page and we have successfully compiled the ITunesU.class file but for some reason our web server does not have a cgi-bin directory to put these files into. Can we put the Java files into a different directory or is