Importing an EAR causes every single jar (module) to created as a project?

The import EAR import wizard will create a new application containing one project for each .jar or .war file found in the EAR file.
Is there any way to select which jars or wars I want imported?
I don't want a project for my apache commons jars as an example...
Thanks,
--Todd

Hi,
... also JDeveloper doesn't create a project for JAR files. If you have JAR files in an EAR file then this goes into the same project as the imported content (which we usually have a option "create project from WAR" for)
Frank

Similar Messages

Every time I try to create a new project it says "The File Could Not Be Opened," how do I fix this?

Every time I try to create a new project it says "The File Could Not Be Opened," how do I fix this?

see if the "oddbal problems" fix helps:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

HT1338 How do I prevent iDVD 7.1.2 from shutting down every time I try to create a new project?

Every time I try to create a new project on iDVD, the program shuts down with one of those "unexpected error" messages. This just started a few days ago, and was working fine prior to this.

Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents of IDVD'S cache folder, User/Home/Library/Caches/com.apple.iDVD.
3 - launch IDVD and try again.
OT

Single Function module to create inbound and outbound delivery

Dear Frens,
   I would like to know how VL10A is creating a deliverty document in background mode.
   otherwise can anyone help me with a single function module or BAPI or BADI which creates both
   inbound and outbound delivery.
Regards
Priya

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

Unable to import .doc or PDF documents to create a new project

When trying to import a WORD document into RH 6.0 to create a
new project, I am only able to proceed up to the Improt Word
Document Wizard dialog "Covnersion Options". Clicking Next leads
the program to start the import, however after a few seconds I get
a message telling me that MS Word seems to not be responding.
I alsow am unable to import PDF files. Here RH claims that
the file type is is not supported or that the file is corrupted.
I would really appreciate if somebody could explain to me
what the problem is and how to troubleshoot it.
Thanks!

Hi prikol and welcome to the RH community. Can you let us
have some more information please. What version of Word do you
have? Has Word been installed after RH? Is this only happening on
one project? Has it worked on other projects? Sorry for all the
questions but if you can let us know the answers we can start to
narrow down to the problem.

How can I get Firefox to load pages properly and stop asking me to add every single page I visit as a "security exception"?

I just downloaded the newest version of Firefox today because it is required for some of the websites I need for my college courses. However, every single website I go to (even the Mozilla site, Google, etc.) says that there's an "untrusted connection." On some sites I have an option between "Get me out of here!" or to add this particular site as a security exception. As you can probably imagine, this is very time consuming and frustrating. I have uninstalled the program (clean uninstall) and reinstalled it. I have reset Firefox, and nothing helps. The problem persists in Safe Mode as well. Along with this issue, every website I manage to get access to is all kinds of messed up. Modules are missing, or the whole page is blank. It can sit there for an hour and nothing loads. I have a good internet connection and fast processor. I was using Chrome before, and Internet Explorer with no issue. About two years ago I used Mozilla Firefox on this same computer and had no issues. I have a 64-bit system, which is the only issue I can think might be causing this problem. I have gone through and tried changing just about every setting, and nothing has helped. I am at my wit's end because I have homework to do and can't because of this problem.

Glad it is fixed. Thanks for posting back, (even if we are not sure exactly what happened).

Anyone know how to resolve iPhone 4 dropped calls as I have a case on and it's still losing every single call I make at least twice and I'm sick to the back teeth of it?

Hi all I recently rang my service provider to complain about my
iPhone 4. Iv done this several times but they always fob me off. This time I kicked off and they told me I would have to speak to apple. I did and they told me there was nothing they could do as my phone was out of warranty.
Its really frustrated me cause it's a widely publicised issue that apple dropped a complete bollock allowing such a major flaw ever get released and then they have the cheek to use the warranty as a reason. This issue should not have anything to do with warranty as it's a fault
With every single iPhone 4 out there. There should have been a recall and the issue resolved. Im disgusted apple and I won't be buying anything from any of your products again.
Does anyone know how I can resolve this as apple want to charge me to repair even though it's there fault this issue exists?
Thanks

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

Every single time I reboot, I have to enter passwords for Apple ID's

When I reboot my MBP, it tells me that this computer is not authorized to play, sync, etc.. with my iPod (or iPhone) and asks me for my password. With I enter it, I get a message that says "This computer is already authorized". I have 4 Apple ID's and it asks me to enter that information for every single one and tells me that the computer is already authorized.
I never had this behaviour in the past. I allowed the Mavericks update just about the same time that AppleCare put a new Motherboard in this computer, so I don't know if either of those has anything to do with this or not?
How can I enter this ONCE and make it stick?
Thanks,
Kirk

Which security software (firewall, anti-virus) do you have?
Some have virtualization features that can cause problems by protecting and restoring files in the Firefox profile folder on a reboot.
You may need to ask advice at their support forum.

How can I get a single jar file with NetBeans?

How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

Dots (events) for every single day in calendar (NEW issue)

Ever since I upgraded to FW 2.0 I have had "dots" appear in every single day of the calendar (symbolizing events) even though I have no events for those days.
Now - I KNOW about the issue with the recurring/repeating events as well as events that "begin" after they "end." That said, I have checked EVERY single event I have in the phone and in the calendar in Outlook and NONE of the events are repeating/recurring and all of them are set up properly with correct start/end times.
From my searching, the above seems to be what's commonly known to cause this problem. Those don't fit MY problem.
The odd thing here is, if I go backward in the month view on the calendar on the phone to February, there are no dots. There are also no events. However, if I go to March on the month view in the calendar, every single day has dots (and continues). The really weird thing here is if you look at the calendar in the month view while it's on March, you can see the last week of February at the top. And in that last week, while in the "March" view, the last week of February ALL has dots. But again, if you move back to "February," all those dots that were there disappear.
So...I'm at a loss now. I've wiped the events off the phone. Edited/pruned/etc. events in the Outlook calendar, and then re-synced with the order to overwrite that which is on the phone. Still no luck. Is this a glitch that needs to be corrected with new FW? Would a restore help? I just don't really know anymore..
Thanks,
John

I am having the same issue. However, I am syncing my calendar to my work computer and the issue presented itself when I upgraded to Office 2007 from 2003. I have since removed Office '07 and did a restore to my iphone which cleared the issue. Then did a sync again to Office 2003 and the issue re-appeared. Not sure if '07 added something to my calendar that is hidden but it is very frustrating.

Every single time I go to my Hotmail account(s), Foxfire will load the page and then freeze within a minute or two requiring a whole shutdown of my browswer. HELP!!!

Over the past few months I have been having issues every time that I log onto my Hotmail account. My Foxfire has seemed to be "buggy" for the past three upgrades but now mostly everything is working well. When I log onto one of my Hotmail accounts, I can start to check it and within a minute or two, Foxfire will freeze and I have to Force Quit. To my knowledge, I'm not missing any PlugIns, I have not changed anything in my settings, yet it constantly freezes. I have to Force Quit Foxfire every single time I want to check my email. I really like FoxFire and don't want to go back to Safari - Help!

''mcmaster50 [[#question-1028934|said]]''
<blockquote>
I get an e-mail through gmail that notifies me that the days comics are available for me to read. I open the e-mail and immediately click on the link that takes me to the site and my page of comics. I shut down the e-mail and only have the site page open. Somewhere about halfway through the list, Firefox crashes. Usually it then gives me that "inform Firefox" notice, but it also just tells me that it has crashed and I have to restart Firefox from the desktop. Rarely, it will let me do a "restore" but, as I say, that is rare - I usually just have to restart Firefox and go back to my e-mail and start all over again. Also, when I am on the site, the icons for going forward or back on the individual comics is not showing, I have to guess which icon is under the pointer.
I have not reset Firefox back to original, as I don't really want to do that, since I seem to always lose important information when I do that. I am using the most current version - 33.02. Even while typing this, FIrefox won't show that dash "-" mark, I just hope it's there.
Also, my bookmarks save(exported) file is 12,924 KB in size, which seems rather large to me. And I do have a large amount of sites saved, so...
Any ideas/help?
Thanks!
Michael
</blockquote>
Sorry, no joy. Thanks muchly anyway!!

[CS3] Is there a way to stop the modal alert on EVERY SINGLE ERROR during a bulk update?

I've inherited quite a mess I'll admit -- I've got ~ 8000 pages each with different dreamweaver templates with the entire site being in a varying state of disrepair. I need to perform a global change -- I'm thinking the way to go about this is to update the templates (thre are ~40 of them, not nested) and let the process run through. However, I've encountered difficulties.
After about ~2300 files loaded into the site cache, dreamweaver crashes -- there is no error, it's an unhandled exception.... it consistently crashes at this point. I'm not sure if this is a specific page causing the problem, or if it's that I'm trying to load 8K files into the site cache.... So anyway, with it crashing consistently trying to build the site cache, I basically press "stop" whenever it tries, and that seems to abort the building and the 'update pages' screen comes up and tries to update the files.
My next problem is that there are countless errors in each of these pages and templates -- ranging from the 'template not found' when an old or outdated file is referencing a template that has been deleted -- to various mismatched head or body tags. Of course, and this is probably the most annoying thing I've ever encountered, this bulk process that should run over 1000s of files without interaction seems to feel the need to give me a modal alert for every single error. The process stops until I press 'OK'
I'm talking update 5-10 files, error... hit 'return', another 5-10 files are processed, another alert, hit 'return' -- rinse and repeat. Oh, and I made the mistake one time of hitting 'return' one too many times -- oh yes, this will STOP the current update because default focus is on the 'Stop' button, for whatever reason. and if I want to get the rest of the files, I need to run it again -- from the start.
Is there a way to silence these errors? They're already showing up in the log, I wouldn't mind going through it once the entire site has been udpated to clean thing up ... but I'm updating quite literally thousands of pages here, I would wager that 1/3 of them have some form of an error on it... do I really need to press "OK" two thousand times to do a bulk update with this program?
Any tips from the pros?

This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Necessary to save every single file automatically in Multitrack Mode?

Using Adobe Audition 3:
Remember in Adobe Audition 1 where if you right-clicked on a wave file inside multitrack view and deleted it, it was in fact deleted? Why did they go backwards and make it so that every single file recorded was saved automatically?
I record 6 separate inputs at the same time in my sessions. Then, I send the XML file along with all the waves to my engineer where he opens it up in Nuendo and masters it. The problem is, this ridiculous feature of saving EVERYTHING makes it so I have to go through all the waves that were deleted from the session and delete them from the session folder manually. This is an unnecessary time vampire.
Think about it, if I have a mix of takes I deleted, and takes I left in the session both in the same folder... I have to delete the files I don't want from the folder before zipping it up with the session file to send off to the engineer. I have to sort through them, or else I am sending both deleted and desired session files to my engineer (unnecessary upload time with extra useless files).
So, is there a way to get Adobe Audition 3 to delete the files I delete from within multitrack mode so I do not have to delete them manually after sessions? It really creates this whole other workload of sifting through files to assemble my folder to be master-ready.
I personally cannot fathom why a program would be altered to save everything considering the option to delete it is present, yet the files can only be deleted manually.

SoundCow wrote:
Why did they go backwards and make it so that every single file recorded was saved automatically?
Okay, background: They didn't go backwards at all - they went forwards in the way most people wanted. Previously, all files were written to a temp file, and only saved when you'd finished recording. This was an almightly PITA for several reasons, not the least of them being that a power failure at the wrong point meant that you lost everything. Also, it put very real limitations on what could happen when you stopped recording in a session - a restart couldn't happen until you'd saved the previous temp file.
So what happens now is direct-to-disk recording in Multitrack. Gets around all those problems completely.
But, if causes an 'opportunity' with takes. This problem with deleting unwanted ones has been around for a while, and is based on not trusting you to know exactly what you are doing! What it comes down to is that deleting takes has to be a deliberate action on your part, not a default option of deleting the previous one when you record over it, just in case you didn't realise that you really wanted it after all... And because they were already recorded as files, removing them from the multitrack display doesn't get them out of the Files pane, and doesn't get them off your drive either.
The only way around this that I'm aware of is to use MediaSweeper. Just make sure that you send Suite Spot a donation...

How to compress a bunch of .java files into a single .jar file?

Hello everyone! I am working on a Chinese segmentation job. Someone offers very excellent
such tool. When I copy his example, I find it imports
          import org.apache.lucene.analysis.Analyzer;
          import org.apache.lucene.analysis.Token;
          import org.apache.lucene.analysis.TokenStream;
          import org.mira.lucene.analysis.IK_CAnalyzer;I have downloaded IK_CAnalyzer.jar file which contains org.mira.lucene.analysis.IK_CAnalyzer class.
I find that I need to download lucene, thus I went into the following website
http://lucene.apache.org/#06+May+2008+-+Lucene+Java+2.3.2+availableand downloaded the lucene-2.3.2-src.tar.gz. Aftre unzip, I found all java source files in java directory (and in many other different subdirectories). Now it seems I need to compile all the src files and compress them into a single .jar file while keeping their original hierarchy unchanged
I think I should use jar command and with some additional options.
Can anyone show me how to do that?
Many thanks!
Edited by: aaron9979215 on Jul 12, 2008 5:17 AM

Thanks for reply, I?ve read that tutorial before I post. Howevver, it do tells how to compress a jar file.
The question I have is how to compile two .java file stored in different packages like
rootPackage-->subPackage-->a.java
rootPackage-->subPackage2-->b.java
I want to compile a,java and b.java both and keep their hierarchy like rootPackage.subPackage.a unchanged. If I directly go into subPackage and compile a.java, I think the hierarchy is changed.
What do you think about it?

Importing an EAR causes every single jar (module) to created as a project?

Similar Messages

Maybe you are looking for