Importing BAPI Signatures from Backend System to ABAP System

Dear Friends,
I wanted to Import several BAPI (RFC Enabled) Signatures from Backend System (ABAP System) to ABAP System. Is there any tool or Transaction in SAP to do import in single shot?
Please let me know if anyone know the procedure.
Thanks and Regards,
Prasad

Hi Ben,
Tell the client that, HRusers are not considered as R/3 users by SAP.
HRUSERS can only execute ESS related services and it is created using transaction HRUSER. ( Though HRUSER creates user in su01).
License for ess users and R/3 users are different and sold seperately by SAP.
If u have ESS user licence, u can create a user in R/3 and in EP. But this user in R/3 should have access to ESS / MSS services only.
Cheers!!
Ashutosh

Similar Messages

To send image to a VC model from Backend system

hi Experts,
Is it possible to send images from backend system to the VC model ?????
If yes then how?
Regards,
Sanjyoti.

Yes, it's possible.
In our employee search model we've programmed a BAPI to return a picturelink to a picture of the employee as a simple text string. This is then mapped to an ordinary HTML view which only has one field: url.
In this case all the "hard" work has been done in the back end. I can't tell you exactly how the BAPI is programmed, but the pictures are administrated in transaction PREL and are stored in SAPs content server.
The links look like this: http://host:port/sap/bc/contentserver/300?get&pVersion=0046&contRep=Z2&docId=45C1AECE313D60D9E1000000C1A19044&compId=DATA
If you look at BAPI BAPI_EMPLOYEE_GETDATA (which we have based our new z-bapi on) you will see the docID field values returned from port ARCHIVELINK (field: ARC_DOC_ID).
Henning

How is goods receipt and invoice sent from backend system to SRM system?

Hi friends
How is goods receipt and invoice sent from backend system to SRM system?
Thanks
regards
Krishna

Hi Khan
BBP_GET_STATUS_2 and Clean_recrec_Up are background jobs to sync ecc and ebp.
BBPIV and MBGMCR are used to send goods receipt and invoice from srm to backend system
So we dont require any special idocs to send goods receipt and invoice from ecc to ebp.Are all handled by BBP_Get_status_2
Regards
Krishna

Triggering file sender process from backend system

Hi,
We have implemented a file transfer using SAP PI to move a file from one of our business partner's FTP server to our SAP ECC backend system.
The integration scenario is file sender (using the SFTP protocol) to proxy receiver with an asynchronous service interface.
The file contains payment information which we wish to pull into our SAP ECC system once daily.
The scenario is currently working using the Runtime Workbench Availability Time Planning option which is set to activate the file sender communication channel accordingly.
To aid testing and to permit adhoc processing of the interface (let's say if there are additional payment runs required after the scheduled run) we'd like to be able to trigger the interface at the user side from the SAP ECC system.
As they don't have access to SAP PI the most appropriate solution would seem to be an ABAP program in SAP ECC that calls an outbound proxy that could link to the file sender mentioned above.
What options are there for creating this integration - can we implement BPM or is there an alternative?
As I've no experience of this type of scenario any blogs or example configuration would be useful.
Thanks,
Malcolm

You can control the CCs externally.
http://help.sap.com/saphelp_nwpi711/helpdata/en/45/0c86aab4d14dece10000000a11466f/frameset.htm
The users will need the two roles mentioned there. You can just create 2 links (one for start, one for stop) and add as favorites in the user's browser. Or if you have portal you could encapsulate this so the links are transparent to the user (also, the roles would be added just to the technical user, not the end user, and the user mapping would be handled in portal layer).
BR,
Henrique.

Run-time reading of roles from backend system

EP5 unification provided the ability of displaying an end-user's backend system roles in the iPanel. This did not require importing the backend role to EP5. This greatly reduces the maintenance of roles in EP (especially with BW!

Hi Daniel,
You have a possibility to upload the whole Role from R/3 to EP6 Portal. You do it the following way:
Create system in Portal for your R/3.
Navigation to System Administration->Transport->Role Upload. Select system that you wish to upload Role from, search for your role.
That's it!
All objects in uploaded role become iViews.
Best Regards,
Julia

Importing Opening Balances from Legacy System

Hi All,
I am trying to import opeing balances for Items, Vendors and Customers and GL a/c from legacy system to SAP B1.
Can anay one of you suggest the process involved at SAP B1 end for importing the balances?
I know DTW can be used, but can anyone explain the process for SAP B1?
I would appriciate your time spent on answering this.

G/L A/c Balances have to brought in as the last step. You can use the Journal Entry to enter the opening balances or Administration > System Initialization > Opening Balance
BP Balances can be imported using DTW templates for Invoices, Credit Memo's etc. There are examples in the DTW folder.
Inventory Balances can be imported using the Stock taking template and the Cost of the Items can be imported as a price list and the Inventory > Inventory Transactions > Initial Quantities, Inventory Tracking and Stock Posting.
Using the stock posting tab you can reconcile the inventory based on the pricelist to which you had imported the Inventory costs.
If you need more details pls let me know
Suda

Limiting POs from backend system for Confirmations

We have activated the ALE model for Confirming Goods Receipt from backend POs. I know that I can use BADI BBP_WF_LIST to filter the POs displayed in the Create/Display Confirmation transaction. However I would like to limit the POs that are sent from the backend system to EBP by document number range. This should prevent cluttering the EBP system with junk POs. Is this possible?
Thanks,
Nancy

Hi
Please go through the links below, which deal with the same issue ->
BADI BBP_WF_LIST implementation
Re: Is it the right BADI
Get PO details from backend
Filtering content in the SRM confirmation worklist
Re: Worklist for confirm goods using BBPCF02
Problem in badi for sourcing worklist 'BBP_WF_LIST'
Re: Confirm Goods / Services Centrally - BBPCF03
Using BADi's BBP_PGRP_FIND and BBP_WF_LIST for Sourcing
Hope this will help.
Do let me know.
Regards
- Atul

Importing PO Receipts from Legacy Systems

Hi guys
My client has asked if it is possible to take approved/receipted
purchase orders from a legacy system and upload them periodically into
Oracle eBS - 11.5.8. That is all that is needed - there are no
amendments or anything coming thru from the legacy system.
If it is possible to provide the base material/ high level scope for a proposal for us to implement then it would be much appreciated.
Thanks in advance
Mike

Hi,
Do u need to upload approved P.Orders from legacy systems into apps?
tehn we can use Interface programs for that for periodically.
Create one concurrent programs by using interface tables.
and make to run in the specified intervals.
Is this ok?
--Basava.S

Exporting and Importing Portal users from Source system to Target system

Hi All,
I have exported all portal users from source portal in to file Users.txt do i need to convert this file in to some other format so that i can import these users in Target portal.
any links documents
Regards,
Murali

Hi,
If you look in to User.txt
I have role also i have deleted role in User.txt uploded file with rest of the otherdata including group it it able to create users.
so in Nut shell let's say
1. UID-Murali
Role- Manager
Group- HRGroup
user existing in DEV and i want to trnasfer data to PRD
Role:Manger should exist in PRD, and group is not mandatory optional
but the link http://help.sap.com/saphelp_nw70/helpdata/EN/ae/7cdf3dffadd95ee10000000a114084/frameset.htm
says while uploading users role is optional it throws waring but i got error.
i am bit confused.
Now let's sau there are 10 users, 10 roles and 2 groups in source system if i want to export all users,roles,groups to target system what sequnce i have to follow without getting any error , warining is there any restriction on number of users, roles, groups i know file size should be less than 1MB.
Points are on the way.
Regards,
Murali

Import of transport from a system that has same name as target system

Hi,
We have an ECC6.0 SPS10 system with SID as "RD2" and the transport
number range on this system is from RD2K900000 to RD2K999999.
If we import a transport into our ECC system(SID is RD2)from an
external system(vendor system) which has the same SID (RD2) and this
external system transport number is RD2K9A0505, does the transprot
number range change in our system?
After the import of the transport(RD2K9A0505) into our system, if we
create new transport request, what would be the transport number
assigned to it?
will it change to RD2K9AXXXX or will it be the same number range it has
before as RD2K9XXXXX.?
Appreciate your answers.
Thanks,
Vinod.

Hi,
This was very unusual to see, anyways let me put my answers
1. the systems has to be configured in landscape to import the transport requests, and in landscape no two systems can have same SID.
2. The transport system has a specific order tht need to be followed, DEV>QAS>PRD, so you did not mentioned the scenario here(please put doenthe scenario if you are importing from DEV of vendor to your DEV), and the SP level and kernel and everything need to be maintained on same level between source and Target else there is possibility for import error or chnages donot meet the criteria in target.
3. Usually when you do imports between the DEV and QAS or PRD the Change request numbers in DEV are usually high but by importing this into QAS the number range for CR will not change,( here the SID are different). In your case i was uncertain since SID are same and number range format is different.
4. Kindly note that SAP recommends no two SID in landscape can be same, so your source system should be from different landscape where transports can be done only through manually from OS level using tp command, and im in doubt wether tp can recognize the change request that was different in format as a change request number.
Regards....
Edited by: Sita Rr Uppalapati on Dec 8, 2008 8:32 PM
Edited by: Sita Rr Uppalapati on Dec 8, 2008 8:34 PM

Error while reading data from backend system.

Hi all,
 When i click on personnel information iview i am getting following error
EIC Authentication
An error occurred while data was read from your ERP system. Contact your system administrator.
I used SQL TRACE and RFC TRACE to find where it got stopped below see the trace result.
 14 PA0105 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "USRTY" = '0001' AND "USRID" = 'ESS_USER1'
 988 PA0105 FETCH 1 1403
 14 PA0001 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
 665 PA0001 FETCH 1 1403
 17 PA0000 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
 615 PA0000 FETCH 1 1403
 25 PA0001 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
 896 PA0001 FETCH 1 1403
 16 PA0002 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
 783 PA0002 FETCH 1 1403
 13.178 ? Server 1 0 EPSAND1 ? Server HREIC_GET_AUTHENTICATION_ESS 643 309
What is the solution to solve this problem ?
Thanks and regards,
Phanikumar

Looks like authorization issue. Could you confirm whether proper authorizations have given to this user?
Also, run the application again get an error and then go to Transaction ST22 and see if there is any system dump for this user.
Regards,
Nitin

How to get a portal URL from backend system?

hi guys,
I'm facing an issue regarding portal-ECC integration I can't proceed with, pls help
we have an ECC linked to ERP portal and have to send email to users from ECC workflow with a link (URL) to portal .. is it somehow possible to get this link or shall I maintain the link in each system manually?
thanks
Juraj

Hi Juraj,
I think this link may be what you are looking for:
URL Navigation - Portal - SAP Library
The main part:
The regular URL for launching the portal is http://portalserver/irj/portal . To implement URL navigation:
From the Portal Catalog, select the page as it appears within the roles hierarchy with which you want to launch the portal.
From the Quick Info pane below the Portal Catalog, copy the name of the page (PCD URL value) and save it in a text editor, replacing the string PCD: with ROLES:// .
Open your browser and add the following string to the default portal URL:?NavigationTarget =<value saved in text editor >
Save the new URL, which you can then use to launch your portal.
BR,
Etay

Error while importing PAR file from local system.

Hi Experts,
While importing PAR file into my NWDS, I am encountered by some strange error.
Please refer below screenshot for your reference.
After clicking on "OK" button of the above error popup, another popup emerge with different error, please find below the screenshot for this error.
Please let me know the reason and resolution of this error. It will be very helpful for me.
Thanks in advance.
Thanks and Regards,
sarvesh Agarwal

Hi ,
Are u trying to import with .bak extension ? If so please rename the file and remove .bak extension and try.
x.par is enough to import not x.par.bak.
Thanks,

Help with importing Mail messages from cloned system

I decided to format and reinstall Snow Leopard on my iMac. Before I did, I backed everything up and, following Apples instructions, thought I had saved all my mail messages etc. It didnt work, or at least, I couldnt get it to work!
So, I need help getting my messages back.
I have Time Machine on an external firewire drive but cant access backups earlier than my recent new install. I also have a clone of my old installation on an external ( USB) drive that I can boot to that contains all of the earlier Mail messages I want.
How can I move the mail messages from that account to my new installation?
Allan

I was able to resolve the matter from an extra found on the MS Office CD. Thank you.
http://www.kbalertz.com/kbNamed_273841/This.article.describes.create.MBOX.files. Microsoft.Entourage.back.message.Note.This.feature.only.applies.message.used.wit h.Address.Notes.aspx

Importing BAPI_PO_CREATE1 from 46c system fails

Hello,
I imported BAPI "BAPI_PO_CREATE1" from a 46c system in a webdynpro project and after import i build the project. It gives following error.
[ddgen] [Error] Structure com.sap.example.create.types.Bapimepoitemx is not generated
 [ddgen] [Error] Name contains invalid characters
 [ddgen] [Info] Catching throwable null
 [ddgen] [Info] com.sap.dictionary.generation.ant.GenerationAntTaskError
 at com.sap.dictionary.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:171)
 at com.sap.dictionary.tools.generation.Generation.generatePersistentStructure(Generation.java:479)
 at com.sap.dictionary.tools.generation.console.GenerationConsole.generate(GenerationConsole.java:165)
 at com.sap.dictionary.generation.ant.GenerationAnt.main(GenerationAnt.java:47)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.dictionary.generation.ant.DDGenAntTask.execute(DDGenAntTask.java:211)
 at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
 at org.apache.tools.ant.Task.perform(Task.java:364)
 at org.apache.tools.ant.Target.execute(Target.java:341)
 at org.apache.tools.ant.Target.performTasks(Target.java:369)
 at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
 at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:119)
 at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:67)
 at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:163)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
 at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
 at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:341)
 at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:175)
 at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1386)
 at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5107)
 at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
 at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
 at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
 at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
 [ddgen] ERROR: Unknown exception during generation null (com.sap.dictionary.generation.ant.GenerationAntTaskError)
 [ddgen] ERROR: Generation failed due to errors (42 seconds)
After checking in detail, i found that structuere BAPIMEPOITEMX has a field called INDUS????, which would be causing this problem.
Has anybody face this problem? ANy resolution.
Thanks.
Rgds
Rajeev

Hello Helmut,
Yes, it is INDUS???? in BAPI. Here is the cut from se11
IN_HOUSE BAPIUPDATE CHAR 1 0 Updated information in related user data field
INDUS???? BAPIUPDATE CHAR 1 0 Updated information in related user data field
INF_INDEX BAPIUPDATE CHAR 1 0 Updated information in related user data field
UNTIL_DATE BAPIUPDATE CHAR 1 0 Updated information in related user data field
DELIV_COMPL BAPIUPDATE CHAR 1 0 Updated information in related user data field
Rgds
Rajeev

Importing BAPI Signatures from Backend System to ABAP System

Similar Messages

Maybe you are looking for