Importing barcodes

Can you import a barcode from excel in to a adobe forms field then print and read the barcode with a hand scanner?

Okay thanks for the input, but when i try to import with images, instead of pages, it says there was a program error and it fails to import. Unfortunately I have to do these in photosjop first, because like I said in the first message, i have to edit the music on the page so that the barcode will fit.
The page is FULL of music, and we cannot simply shrink because that makes it harder for people to read the smaller notes. So I have to move the measures closer together, and sometimes I have to cut out extra space in the measures. If I were to do this in quark I would need to set up several different image boxes and then make sure they would line up properly. It is not very time effecient because I do dozens of these each day.
I have been playing around with the downsampling options and I am getting better results with that. I will post any progress I happen to find.

Similar Messages

  • Imorted barcode graphics in FrameMaker 10 are not displaying properly in my PDFs

    I have imported barcode graphics (that were embedded in a Microsoft 1997 Word document and I don't have the original imported images) into FrameMaker 10. However, when I create a pdf and view it in Adobe Reader 10 or Adobe Acrobat 10.1.3 and then print the document, the barcodes will not scan. Some of the barcodes are code 39. If I print the FrameMaker document, the barcodes don't scan either. The barcode graphics also don't display properly in Microsoft Word, but they scan fine from the Word document and the pdf. I can get the barcodes to display properly in Word if I right-click on the barcode and select Edit Picture.
    I have tried importing the Word document into FrameMaker, making bitmap images of the barcodes in Photoshop and then importing them into FrameMaker and trying to do a special paste into FrameMaker. However, the barcodes still don't look right, print right or scan at all.
    I don't have a lot of experience with barcodes, graphics or FrameMaker, so any light that can be shed on this issue is appreciated.

    OK, to simplify this a bit, a barcode is not an exotic specie -- it's just
    a graphic file. If you embed a crisp .PNG or .PDF in FM it should print
    correctly, no matter what the subject matter is.
    What I'd do is either:
       - Select the graphics in Word and Save As Image to export them (or just
       save the Word file as HTML -- it'll write out the graphics as .JPGs, but at
       least they'll be there. Or
       - if the barcodes have a legend on them (usually numbers on the bottom
       of the code) just go to any of the online Bar Code generation sites and
       pump them in to get a fresh graphic.
    Then:
       1. Save or convert the graphic to something besides a .jpg. --- a .png
       or PDF -- In Photoshop or another editing program, bump the resolution to
       300 dpi or so for print quality resolution. If necessary, convert it to
       black and white and clean up any grey edges.
       2. Import into Frame.
       3. Print to the Adobe Acrobat logical printer; don't use SaveAsPDF. Pick
       a job option that doesn't apply .jpg compression to images -- it'd be
       better not to downsample them at all.
    Art
    Art Campbell
              [email protected]
      "... In my opinion, there's nothing in this world beats a '52 Vincent and
    a redheaded girl." -- Richard Thompson
                                                          No disclaimers apply.
                                                                   DoD 358
    I support www.TheGrotonLine.com, hyperlocal news for Groton MA.

  • Generate reports contains barcode!!!!!

    I want to generate reports contains barcode, so I want to know how to import barcode font in BI to make it support rtf files that contain barcode font.
    Any Help plz

    plz see http://www.oracle.com/technetwork/middleware/bi-publisher/learnmore/demo-library-toc-173301.html
    - External Fonts
    Re: Font - problem.
    Re: Font - problem.

  • Check next number (activity code)

    Good day experts.
    This is the issue we are currently importing a SFC into the system or using the supplier barcode for the SFC inside visprise.  We unfortnately use two diferent product types from the same supplier where the two don't really have any differeneces.  The products are hard drives one is 40 gig and the other is a 80 gig, but inside visprise we are having troubles keeping the product seperated.
    We are wanting a way to check the barcode, because the part number is inside this barcode from the supplier to seperate the two inside visprise.
    I thought about using check next number activity code, but unfortnately this isn't getting the job done.  I was wondering if I was doing something wrong.  As of right now I have the acitivity codes create SFC as Pre-start and check next number as a pre-validate start.   I have tried changing the hook point, but nothing seems to work.  I can force it to not work at all or work for everything.
    I have a setup the next number maintenance and I can print out the correct barcode for this material, but I can't prevent us importing a incorrect barcode.

    Basically this is what is happening.  We are 'importing' Barcodes into the data base.  Problem lies we have two materials that are very close to each other (both hard drives) they are getting mixed inside the test equipment causing us to much down time.  I was reading up on the activity codes and was wondering how next number maintenance or mask valiation was working inside SAP ME.  To try and prevent the confusion.
    The biggest differences between the materials, that concerns SAP ME, is the barcode format.  The two different part numbers are inside the the supplier barcode that is given to us, which we are currently using for our SFC in SAP ME.
    It isn't a requirement for me to use SAP ME, but I was exploring every avenue.  If it is true that these only work at the specific points that the help site is suggesting i will try a different avenue, this is looking very possible right now.  I have tried using the activity codes with no luck in succeeding in the goal.

  • EAN13 checkum in ABAP?

    Hi ABAP guru,
    I urgently need to convert the following logic into ABAP programming to generate a checksum digit for Barcode EAN13:
    proc checksum {first12digits} {
        set total 0
        for {set i 0} {$i < 12} {incr i} {
          set multiplicator [expr ($i % 2 == 0) ? 1 : 3]
          incr total [expr [string index $first12digits $i] * $multiplicator]
        set checksum [expr 10 - ($total % 10)]
        return $checksum
    Please help and I promise maximum points for answer.
    Thanks

    Hello
    On ECC 6.0 there is a function module ARCHIV_BARCODECHECK_EAN_13 available.
    However, testing the function module (SE37) does not return any reasonable results (which might be a problem of the testing framework).
    Below you see the coding of the fm:
    FUNCTION ARCHIV_BARCODECHECK_EAN_13.
    *"*"Lokale Schnittstelle:
    *"       IMPORTING
    *"              BARCODE LIKE  TOAV0-ARC_DOC_ID
    *"              BARCODETYPE LIKE  TOACM-BARCODE_TY
    *"       EXPORTING
    *"              RETURN
      IF BARCODETYPE EQ 'EAN_13'.
        DATA: STRING(40) TYPE C.
        DATA: I TYPE I, M TYPE I, N TYPE I, NUTZ TYPE I, SUM TYPE I.
        DATA: L TYPE I, PRUEF TYPE I.
        FIELD-SYMBOLS: <S1>.
        RETURN = FALSE.
        STRING = BARCODE.
        L = STRLEN( STRING ).
        IF STRING CO '0123456789'.
        ENDIF.
        IF SY-FDPOS EQ L.
          IF L > 1.
            L = L - 1.
            ASSIGN STRING+L(1) TO <S1>.
            MOVE <S1> TO PRUEF.
            IF PRUEF EQ 0.
              PRUEF = 10.
            ENDIF.
            I = L - 1.
            N = 1.
            DO L TIMES.
              ASSIGN STRING+I(1) TO <S1>.
              MOVE <S1> TO NUTZ.
              M = N MOD 2.
              IF M EQ 1.
                SUM = SUM + ( NUTZ * 3 ).
              ELSE.
                SUM = SUM + NUTZ.
              ENDIF.
              N = N + 1.
              I = I - 1.
            ENDDO.
          ENDIF.
          M = SUM MOD 10.
          M = 10 - M.
          IF PRUEF EQ M.
            RETURN = OK.
          ENDIF.
        ELSE.
          RETURN = FALSE.
        ENDIF.
      ELSE.
        RETURN = FALSE.
      ENDIF.
    ENDFUNCTION.
    Regards
      Uwe

  • Is it possible to import data values to be used in barcode creation?

    I have a list of UPCs in an xml file, and would like to import the data to be converted into barcodes by Designer.  Is this possible?  Could anyone lead me to documentation? Thanks.
    Al

    You can import data from an XML file by creating a new data connection and you'll need to use the Paper Forms barcode. Be aware that use of the paper forms barcode requires LiveCycle Barcoded Forms (separate license required, according to the pop up when I place the field in a form). Once you set the data connection it's just a matter of writing a script to sift through the XML values one at a time to get the barcode.

  • How do I import an EPS file for a Barcode?

    I made a book but want to add a Barcode. The barciode company made one for me in EPS file format. Can I just drag that in? It seems to automatically into a PDF file when I do that, which seems strange??
    Thanks

    .eps is a dead format.
    There are 3 useful vector formats now.
    .ai (with .pdf preview) for complex vectors with blends.
    .pdf for flat color vector
    .svg for the web (unfortunately Apple has lousy support for this).
    Peter

  • Confusion with the use of PDF417 Barcodes

    I am trying to get clarification on what is required to utilize the Acrobat Designer to create a form that creates a PDF417 barcode. Here is the scenario:
    We would like to create a form with Designer (bundled with Acrobat 7.0 Professional)that will be used as an index sheet for a document scanning system.
    The form would contain one or more fields that a user would complete using the standard Acrobat 7.0 Reader that they can download from Adobe. When the user completes the data entry into the fields, they will print out the form (containing the 2D barcode (PDF417).
    The form would be scanned and put through recognition software that is supposed to ready PDF417 2D barcodes.
    I have read through the literature and have seen inconsistent representations regarding the ability of a user to use the Acrobat reader to complete the form and print it with the PDF417 barcode.
    In one of the forum postings a user was told that they needed certain decoder software from Adobe or extensions.
    I am not clear if the user filling out a form using Acrobat 7.0 reader, which generates the PDF417 barcode supposedly, can be read by an application which supports that barcode type. Or, if this is a special type of PDF417 barcode that has some additional attributes that requires special software from Adobe to be recognized.
    Please explain how I accomplish the objective set forth above.

    Mike,
    It looks like I scanned over your email a little too quickly and missed a
    VERY important point. You mention that your form will be "bundled with Acrobat 7.0 Professional". This is VERY important.
    In fact, you will need to license nothing else from Adobe. You DO NOT need Reader Extensions because you are deploying Acrobat Professional on the work stations that will be filling in your forms. You do not need to "turn on" hidden functionality of the Free Reader if you are using Acrobat Pro. You already have all the functionality you need.
    Second, when you fill in a Barcoded Form with Acrobat Professional the PDF417 Barcode that is rendered in your form will be a 100% standard PDF417 Barcode. But do not turn on compression. When filled in - in Acrobat - the Barcode is rendered so that it can be read by ANY Decoder that can read PDF417. However, if you enable compression you will need to use the Adobe Decoder. If you start decoding and see you are getting lower than a 99.9% decode rate, take a look at buying the Adobe Decoder. Not the whole "Barcoded Forms" license, just the Decoder.
    Again,
    if you are using Acrobat to fill in these forms, you have nothing else to buy. If you want to deploy these forms with the Free Reader then you will need to license Adobe LiveCycle Barcoded Forms and possibly ARES.

  • How can i display barcodes in scripts

    hi
    experts can u help me for this

    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
    Not to fear though, there are two ways to get around this:
    - You can have your IT department do some research -
    most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
    - Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
    - Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
    To Create a Bar code prefix:
    1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Which barcode printer are you using ? Can you download this file and see.
    http://www.servopack.de/Files/HB/ZPLcommands.pdf.
    It will give an idea about barcode commands.
    Check this link:
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    Check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    Detailed information about SAP Barcodes
    A barcode solution consists of the following:
    - a barcode printer
    - a barcode reader
    - a mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    To create barcode go to transaction se73 Then System Bar codes.
    There are some barcodes already present.
    If they solve your purpose,use them otherwise create new ones.
    The main characteristics of barcodes are
    1) Min. Char
    2)Max Char
    3)Width
    4)Height
    Now in your sapscript create a character format.
    There you can see an option to select barcode.
    From there select the appropriate type.
    Now use this character format for the field you want to display the barcode.
    U can also refer to
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    Re: barcode for script
    regards,
    srinivas

  • How do I generate a data merge in InDesign from an excel spreadsheet which includes a barcode

    Can you please advise if the following process is possible within InDesign CS 5.5? (Mac OS 10.8.2).
    We need to create a data merge that includes a barcode. The data merge is for several thousand records.
    We have a customer-supplied Excel spreadsheet that contains seven fields, one of which is a number that ultimately needs to print as a barcode when we make the data merge in InDesign.
    As you would expect, the conventional six fields data merge perfectly - but we can't find a way to make the barcode print correctly within the data merge.
    We have investigated several possible solutions without success.
    Some solutions suggest a plug-in for Excel to convert the number into a barcode whilst still in the spreadsheet - but this doesn't come across correctly when we import the CSV file into the InDesign data merge.
    We have investigated certain third party software applications but none provide the full solution we require. Some, for example, appear to create the barcode within the Excel spreadsheet but don't produce the barcode correctly when we data merge in InDesign; and some will allow us to create a one-off barcode within InDesign but have no automated way of retrieving the thousands of Excel numbers and turning them into barcodes.
    We have also come across possible 'font' solutions but have had no success with these either.
    For a previous job we needed to produce we outsourced to a specialist mailing company, who assured us they produced the whole job (very quickly) within InDesign. They, understandably, won't tell us how they did it. But, given the speed with which they produced the job for us, we imagine - with the correct software - the whole process is easy to do.
    Can you please advise?

    HI MIKE
    Thanks again for your reply and your help with this.
    I've downloaded the barcode font from the link you supplied.
    I've tried three tests - and seem much closer to getting what we need. But I've come up against a couple of issues.
    TEST 1 - almost just to see if the downloaded font worked, I simply data merged our source csv file and applied the downloaded barcode font to the serial number in ID. Probably unsurprisingly, this produced a perfectly printed barcode - that wouldn't scan.
    TEST 2 - I manually added asterisks before and after the serial number in the first couple of fields and then tried the same process as TEST 1. It produced a perfectly printed barcode which this time DID scan correctly - but obviously the barcode had asterisks on it which I don't want. I just want the serial number. And with thousands of serial numbers we need the addition of the asterisks to happen automatically (which is where your text editor process seems the perfect solution, if we could get that to work).
    TEST 3 - Noting your comments about using parenthesis around the serial number, I followed your example of (123456). But Excel won't let me type a parenthesis. It lets me type the parenthesis but then instantly substitutes it with a - (hyphen) before the number in the actual serial number cell and no character at all after the number.
    If you have any suggestions or solutions for any of the above they'd be gratefully received! Thanks again for all your help with this.
    Kind regards
    Rob

  • How to print  the barcode in a smartform satisfying specific condition

    Hi
    I have a requirement where I need to print the barcode System Bar code = BC_93
    satisfying the following requirement:
    The Bar code is made up of the concatenation of “code1 ”, “dash character”
    and “ code2”. The two codes ( that is some field in a custom table) should be
    eight char long each (put leading zero if the length of the code is shorter).
    This barcode shall be printed always apart from:
    a) code1 material type is ZCPF
    b )Is a combi order, with no code2 stored in storage location “abc”
    please help with example . its very urgent , points will be rewarded.
    Thanks

    To Create a Bar code prefix:
    1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Which barcode printer are you using ? Can you download this file and see.
    http://www.servopack.de/Files/HB/ZPLcommands.pdf.
    It will give an idea about barcode commands.
    Check this link:
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    Check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    Hope this link ll be useful..
    http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
    go through these links and cose u r previous threads,
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    smartform - barcode
    http://www.erpgenie.com/abap/smartforms.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
    Detailed information about SAP Barcodes
    A barcode solution consists of the following:
    - a barcode printer
    - a barcode reader
    - a mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    Re: how to print barcode using smartform and sapscript...?

  • Printing barcode in HP laser jet  through smartform

    Hi folks,
    can i print barcode in HP laser jet P3005 PCL6 by using smartform???
    plz advice.
    regards
    smita

    Yes, you can.. I guess, HP laser jet P3005 series PCL6 can print bar codes.
    I am attaching the list of BARCODE supported printers
    List of device types in SAP Releases 4.6x/6.xx/NW04/NW04s
    OSS NOTE : 8928
    Installation of new device types ********************
    Many device types are appended as a zip-attachment to this note.
    README.TXT contains information about these device types and codepages.
    README_UPLOAD.TXT contains information on how to import the device
    types.
    PRINTER DRIVERS AND DEVICE TYPES:
    In R/3, a distinction is made between "printer driver" and "device type". The device type consists of all the attributes defined for an output device. For correct access, these must be made known in the R/3 system. They cover aspects such as control commands for font selection, page size, character set selection, character set used and so on. One of these attributes is the printer driver to be used by SAPscript (R/3 forms processor) for this particular printer.
    If your printer is not specified in the list below, ask the manufacturer if the printer is compatible with one of the defined printers or if it can be used with another emulation (for example, Postscript).
    If the printer is not compatible or cannot be operated using an emulation, you must create a new device type (if the printer is not compatible). To print from SAPscript, you must choose one of the existing printer drivers.
    At present, there are five SAPscript printer drivers. They include:
    for HP-PCL5 (for example, HP Laserjet 3,4,5,6 series)
    for PostScript printers (PS level 2)
    for PRESCRIBE (for example, Kyocera FS-1500)
    for device types SWIN/SAPWIN/xxSWIN/xxSAPWIN
    for all other models.
    The last driver is known as the "standard driver". It cannot provide absolutely precise positioning on the paper and does not support proportional fonts. Printer drivers are relevant for forms output with SAPscript. For the output of ABAP lists special printer drivers are only used as of Release 4.5A. They are anchored in the C kernel and are developed and maintained exclusively by SAP.
    In the spool environment, device types refer not only to printers but also other output devices, for example, fax machines. Device types support specific printers or printer models. Device type definitions are stored completely in tables and can be individually adapted, modified or enhanced. If SAP performs such an adjustment for a customer, it constitutes a consulting service, and is generally charged seperately. On the other hand, the list of device types, above all in conjunction with SAP's hardware partners, is continually expanded.
    COMPATIBLE PRINTERS:
    Some printer models have been so successful on the market that many OEM products, clones and compatibles are also listed. You can often use compatible printers with R/3 by entering the printer definition of the original. Since complete compatibility is extremely rare, SAP can offer no assurances regarding the usability of compatible printers. This also applies to follow-up models made by the original producer.
    LIST OF PRINTERS:
    This is the list of device types supplied by SAP in different Releases. Most of these device types use "Western European" or "North American" character sets. Some device types in newer Releases however, also support other character sets and language areas such as Russian or Czech.
    The device types named in this list are supported in the standard R/3 System as of the release mentioned.
    If an OCR-A font (prerequisite for check printing) or an OCR-B font is supported in the R/3 device types, this is indicated. However, this generally requires additional font cassettes or firmware for the printer involved, since few printers have an OCR-A font "built in." For additional information about this, contact the printer manufacturer.
    Check related notes attached for addition information on printer supportin R/3.
    Related notes:
    Note 135894 contains information on printing labels on special label printers.
    Note 05196 contains information on printing bar codes with SAPscript
    Note 94233 contains information on printing MICR font with SAPscript
    Note 62178 contains information on device types for the Japanese version of the R/3 System.
    Note 77891 contains information on device types for IBM-SCS printers on the IBM AS/400 hardware platform.
    Note 98477 informs you on device types for printers by the manufacturer PSi.
    Note 107938 contains information on device types for printers by the producer Tally.
    Note 141719 contains information on device types for printers from the producer Printronix.
    Note 141914 contains information on device types for printers from the producer Lexmark.
    Note 153879 contains information on compatible printer models of producer EPSON.
    Note 154494 contains information on compatible printer models of producer Genicom.
    Note 199166 contains information on device types for printers from the producer Hewlett Packard.
    Note 214187 contains information on device types for printers from the producer Océ.
    Note 398236 contains information on device types for printers from the producer Sharp.
    Note 408189 contains information on device types for printers from the producer Konica Minolta.
    Note 436609 contains information on device types for printers from the producer Xerox.
    Note 458047 contains information on device types for printers from the producer Ricoh.
    Note 485240 contains information on device types for printers from the producer SAVIN.
    Note 485244 contains information on device types for printers from the producer NRG.
    Note 516687 contains information on device types for printers from the producer Lanier.
    Note 516669 contains information on device types for printers from the producer Gestetner.
    Note 878109 contains information on device types for printers from the producer Danka.
    ASCIIPRI
    Generic device type for line printers that can be used in urgent cases where no customized printer definition exists for a line printer. It contains no printer-specific control commands, but merely CARRIAGE RETURN, NEWLINE and FORMFEED commands. It uses the standard 7 bit ASCII character set (USASCII).
    COMPU960
    Device type for BULL line printers COMPUPRINT 4/66, as well as COMPUPRINT 960. Character set used: IBM 2 German.
    DECLA75P
    Device type for the DEC line printer DEC LA75 Plus.
    DECLN07
    Device type for the DEC laser printers LN07 and DECLaser 1100.
    HP256X
    Device type for all Hewlett-Packard line printers in the HP256... series. Based on the HP manual describing the HP256X series, OCR-A is included in this printer definition, but the printer needs an additional firmware/font cassette.
    HP2930
    Device type for Hewlett-Packard's HP2930 line printer.
    HPDJ500
    Device type for Hewlett-Packard's DeskJet 500 ink jet printer.
    HPLJIIID
    Device type for Hewlett-Packard's LaserJet IIIP, III, IIID and IIIsi printers, as well as the HP LaserJet 4 series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
    HPLJSTND
    Generic device type for printers that have an HP LaserJet emulation but cannot be operated via the definitions HPLJ4, HPLJIIID or HPLJ_II.
    HPLJ_II
    Device type for the Hewlett-Packard LaserJet II laser printer series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
    KYOF1000
    Device type for the Kyocera F-1000 laser printer. OCR fonts are not supported. Bar code printing is supported.
    KYOF1200
    Device type for the Kyocera laser printers F-1200 and F-1200S. OCR fonts are not supported. Barcode printing is supported.
    MT600
    Device type for the Mannesmann-Tally line printer MT600. Character set used: US-ASCII (that is no German umlauts).
    MT600GER
    Device type for the Mannesmann-Tally line printer MT600. Character set used: German. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
    MT600NDA
    Device type for the Mannesmann-Tally line printer MT600. Character set used: Norwegian / Danish. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
    OKI341
    Device type for the OKI Microline 3410 line printer.
    POSTSCPT
    Device type which is used for pure PostScript printers. Barcode printing from R/3 is not supported.
    S4440XTG
    Device type for the SEL Alcatel line printer 4440XT. Character set used: German.
    SAPWIN
    Generic device type for printers linked (or also fax devices) to PCs running under MS Windows 3.1, Windows 95 or Windows NT by means of the R/3 program SAPLPD. Windows printer drivers are used and the character set is ISO 8859-1. Barcode printing from R/3 is possible with the additional installation of a third-party DLL (see Note 25344), but is not supported in the standard system. OCR-A and OCR-B fonts are possible with an appropriate TrueType font (see also Note 48803).
    Important Note:
    As of Release 3.0E, you can use SAPWIN to:
    Print proportional fonts and lines/boxes in SAPscript
    Print black and white as well as color TIFF graphics (with the 32-bit SAPlpd on Windows 95 and Windows NT only).
    See Note 39031.
    SWIN
    Generic device type for printing/faxing using MS Windows with SAPlpd. It is available as of Release 3.1H. Device type SWIN differs from SAPWIN in the layout of X_... formats for ABAP/4 list printing. The font size and line spacing were adjusted, particularly for color list printing.
    In addition, SAPWIN contains an expanded list of SAPscript printer fonts for current releases, for example, Greek and Russian.
    SNI4009
    Device type for the Siemens-Nixdorf SNI 4009 line printer.
    SNI4010
    Device type for the Siemens-Nixdorf SNI 4010 line printer. OCR-A is included in the printer definition, but the printer needs an additional firmware/font cassette.
    SNI9014
    Device type for the Siemens-Nixdorf SNI 9014/12 line printer. OCR-A and OCR-B are included in the printer definition. The 9014/12 has OCR-A and OCR-B font installed as a default.
    SNIZD13
    Device type for the Siemens-Nixdorf SNI ZD13 line printer. OCR-A is included in the printer definition. The ZD13 has OCR-A font installed as a default.
    CIP1000
    Device type for C.ITOH line printers CI-1000 and CI-500. The IBM Proprinter II/XL emulation and IBM character set 2 (multilingual) are used.
    EPESCP
    Device type for all 24 or 48 element EPSON printers that use the control language ESC/P. Character set IBM 437 is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
    EPESCP2
    Device type for EPSON printers that use the control language ESC/P2. The character set IBM 850 (multilingual) is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
    EPESCP9
    Device type for all 9-pin dot matrix EPSON printers that use the control language ESC/P. The standard ASCII character set is used with some additional international characters.
    EPLQ550
    Device type for the EPSON LQ-55 dot matrix printer. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
    HP2300
    Device type for the Hewlett-Packard 2300 line printer series. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
    HPLJ4
    Device type for all printers in Hewlett-Packard's LaserJet 4 series (this includes LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4si). OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 4 Series printers requires SIMM module "JetCAPS Intelligent Barcode SIMM" and is supported.
    IBM239X
    Device type for the IBM 238X/239X Plus line printer series from Lexmark. This includes the types IBM 2380 Plus, IBM 2381 Plus, IBM 2390 Plus, IBM 2391 Plus. The IBM emulation and character set IBM 850 are used.
    IBM4226
    Device type for the IBM 4226 line printers from Lexmark. The IBM emulation and the character set IBM 850 are used.
    IBM4232
    Device type for the IBM 4232-302 line printer from IBM. The 4202 emulation and the character set IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
    IBM6408
    Device type for the IBM 6408-A00 line printer from IBM. The PropPrinter III XL emulation and the character set IBM 850/IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
    IBMAFP
    Device type for IBM's external SAP2AFP converter. The R/3 spool output is converted to AFPDS format and passed to IBM AFP software. IBMAFP can only be used in conjunction with spool-exit (access method Z when defining the device type). Selection of printers directly connected to R/3 is not possible. IBMAFP must be used for 240 pel AFP printers.
    Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
    IBMAFP is for use on R/3 UNIX and Windows NT platforms.
    IBMEFP is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
    IBMAFP3
    Device type for IBM's external SAP2AFP converter that converts the R/3 spool output to an AFPDS format and sends it to IBM AFP software.IBMAFP3 can be used only in conjunction with spool-exit (access method Z when defining the device type). Selection of printers connected via R/3 is not possible. IBMAFP3 must be used for 300 pel AFP printers.
    Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
    IBMAFP3 is for use on UNIX and Windows NT platforms.
    IBMEFP3 is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
    IBMSCS
    Device Type IBMSCS supports the "basic IBMSNA Character String" data stream for printers that are connected under IBM OS/400. IBMSCS is only supported for the use under SAP R/3 on hardware platforms IBM AS/400.
    LX4039
    Device type for the Lexmark laser printer series 4039. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/typeface cassette. "HP LASERJET barcodes & MORE FONT CARTRIDGE" is required. Barcode printing from R/3 is not supported.
    KYOFS150
    Device type for the Kyocera laser printer FS-1500, FS-3500, FS-1550+. OCR fonts are not supported. Barcode printing is supported.
    NECP30
    Device type for the NEC matrix printers P20/P30. The character set used is IBM codepage 850 (multilingual).
    NECP72
    Device type for the NEC matrix printers P62/P72. The NEC Pinwriter level 2 emulation and the character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/font cassette.
    NECPW
    Device type for the NEC 48-pin Pinwriter P5XL, P9XL, P6/P7, P6plus/P7plus, P2200, P2plus, P60/P70, P90, P20/P30, P22Q/P32Q, P42/P52, P62/P72. The character set IBM codepage 850 (multilingual) is used.
    SNI4011
    Device type for the 24-pin version of the SNI 4011 dot matrix printer. The EPSON LQ-850+ emulation and character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. The printer has these fonts built in.
    SNI20XX8
    Device type for the Siemens-Nixdorf 2050-8, 2075-8 and 2090-8 laser printers (HP-LaserJet emulation). For operation with R/3, you need to obtain a special font diskette for the printer from SNI. This contains the fonts required, including OCR-A and OCR-B. Barcode printing from R/3 is not supported.
    MT2033
    Device type for the Mannesmann-Tally T2033 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
    MT2045
    Device type for the Mannesmann-Tally T2045 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
    DEVICE TYPES NEW TO RELEASE 3.1G:
    HPDJ660
    Device type for the color inkjet printer Hewlett-Packard DeskJet 660C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
    HPDJ850
    Device type for the color inkjet printer Hewlett-Packard DeskJet 850C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
    HPLJ5SI
    Device type for Hewlett-Packard's LaserJet 5Si. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 5Si requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
    MT6045
    Device type for the Mannesmam-Tally T6045 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
    Important note: For use with R/3 the printer's standard character set must be set to Latin-1.
    NEW DEVICE TYPES IN RELEASE 3.1H:
    MT691
    Device type for the Mannesmann-Tally T691 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definitions. These fonts are built into the printer at the factory.
    NEW DEVICE TYPES IN RELEASE 3.1I:
    SAPWIN5
    Device type for printing cyrillic characters (character set ISO 8859-5, for example Russian) with SAPlpd/Microsoft Windows. This device type works exclusively with the Russian Windows 95 or NT 4.0 (not with Windows 3.1). To use it, a 32 bit version of the SAPlpd with a number 4.00 or higher is required.
    DEVICE TYPES IN RELEASE 4.0A:
    HPLJ5
    Device type for all printers of the Hewlett-Packard LaserJet 5 printer series (LaserJet 5/5m, 5P/5MP, 5C) except for HP LaserJet 5 SI. OCR-A/OCR-B are included in the printer definitions. However, the printer needs an additional firmware/font cassettes. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with printers of the HP LaserJet 5 series requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
    Important note: HPLJ5 uses new 4.0A features (scalable fonts under PCL-5) and can only be used in Release 4.0A and higher releases!
    I2HP4
    Device type for Eastern Europe for all printer of the Hewlett Packard LaserJet 4 printer series (for example, LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). Uses character set "ISO 8859/2" (Latin 2). OCR-A/OCR-B are included in the printer definitions, however, the printer requires additional firmware/font diskette. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a respective SIMM module is required. For the barcode print from R/3 with printer of the HP LaserJet 4 series the SIMM module "JetCAPS Intelligent Barcode SIMM" is required and supported.
    I2SWIN
    Device type for Eastern Europe for printing under Microsoft Windows via a 32 bit SAPlpd. I2SWIN uses the character set ISO 8859/2 (Latin 2). To use I2SWIN, the following preconditions are required:
    SAPlpd 32 bit version, from 4.00
    Microsoft Windows NT 4.0 or eastern European Win95 (Latin 2 version)
    R/3 Release 3.0E or higher
    Important note: Microsoft Windows 3.1 (SAPlpd 16 bit) is NOT supported!
    I7SWIN
    Device type for Greece for printing under Microsoft Windows via SAPlpd 32 bit. I7SWIN uses character set "ISO 8859/7" (Greek). Requirements for operation of I7SWIN are:
    SAPlpd 32 bit as of Version 4.00
    MS Windows NT 4.0 or Greek Windows 95
    R/3 Release 3.0E or newer
    Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
    NEW DEVICE TYPES IN RELEASE 4.5A:
    HPLJ4000
    Device type for the Hewlett Packard LaserJet 4000 printer and
    related models such as LaserJet 5000, 8000, 8100 and 8150.
    HPLJ4000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
    Device type HPLJ4000 offers improved output of ABAP print lists by using a special PCL-5-printer drivers and can therefore only be used in Releases as of 4.5A.
    I9HP4
    Device type for Turkey for all printers of the Hewlett-Packard LaserJet 4 printer series (among others LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). I9HP4 uses character set "ISO 8859/9" (Latin 5). OCR-A/ OCR-B are contained in the device type, however, the printer needs extra firmware or an extra font cartridge. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a corresponding SIMM module is needed for this. The SIMM module "JetCAPS Intelligent Barcode SIMM" is a requirement for printing barcodes from R/3 with printers of the HP LaserJet 4 series and is supported.
    KYOFS170
    Device type for the Kyocera laser printer FS-1700. OCR fonts are not supported. Barcode printing is supported.
    Device type KYOFS170 offers improved output of ABAP print lists by using a special PRESCRIBE-II-printer driver and can therefore only be used in Releases as of 4.5A.
    POST2
    New device type for PostScript-level-2-printer which can be used alternatively to POSTSCPT. Barcode printing and OCR printing from R/3 is not supported.
    Device type POST2 offers an improved output of ABAP print lists by using a special PostScript-L2-printer driver and can therefore only be used in Releases as of 4.5A.
    NEW DEVICE TYPES IN RELEASE 4.6A:
    IXLINK
    Device type for the external XLink/SAP translator of Xerox, which translates R/3 SAPGOF data to Xerox format and transfers data to the Xerox production printer. IXLINK can only be used if the XLink/SAP translator is being used. You cannot access printers, which are connected via R/3!
    OCR-A and OCR-B fonts as well as bar codes are supported.
    NEW DEVICE TYPES IN RELEASE 4.6C:
    HPLJ8000
    Device type for Hewlett Packard LaserJet 8000, 8000N, 8000DN printers. HPLJ8000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
    Device type HPLJ8000 offers improved output of ABAP print lists by using a special PCL-5-printer driver and can therefore only be used in Releases as of 4.5A.
    HPLJ1100
    Device type for Hewlett Packard LaserJet 1100 printer. HPLJ1100 uses character set "ISO 8859/1" (Latin 1). OCR-A/B as well as barcode print from R/3 are not supported.
    Device type HPLJ1100 can only be used in Releases as of 4.6C.
    I9SWIN
    Device type for Turkey und printing with MS Windows via SAPlpd 32 bit. I9SWIN uses character set "ISO 8859/9" (Latin 5). Preconditions for using I9SWIN:
    SAPlpd 32 bit as of version 4.00
    MS Windows NT 4.0 or Turkish Windows 95 (Latin 5 Version)
    R/3 Release 3.0E or newer
    Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
    IBMNP
    Device type for laser printer IBM InfoPrint 20 as well as the IBM Network Printer 12, 17, 24, IBM InfoPrint 32, InfoPrint 40. OCR- and MICR fonts are supported by the device type. The printer needs an additional module for these fonts. "Barcode-, MICR and OCR A+B SIMM for IBM Network Printers" is required. Read Note 133660 also. Bar code printing from R/3 is not supported.
    Important note: IBMNP uses new 4.0A features (scaleable font under PCL-5) and can only be used in maintenance level 4.0A and higher.
    NEW DEVICE TYPES IN RELEASE 6.10:
    IBMIP12
    Device type for laser printer IBM InfoPrint 12. IBMIP12 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP21
    Device type for laser printer IBM InfoPrint 21. IBMIP21 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP32
    Device type for laser printers IBM InfoPrint 32 and InfoPrint 40. IBMIP32 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP2K
    Device type for production laser printer IBM InfoPrint 2000 with PCL-5 emulation. IBMIP2K uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP60
    Device type for laser printer IBM InfoPrint 60. IBMIP60 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP70
    Device type for laser printer IBM InfoPrint 70. IBMIP70 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBM4247
    Device type for line printer IBM 4247. The printer's 4247 emulation and character set IBM2 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
    Attention: Please follow note 396462 when installing the printer.
    NEW DEVICE TYPES IN RELEASE 6.20:
    IBM6400
    Device type for line printer IBM 6400. The printer's "P-Series" emulation and character set PC850 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
    Attention: Please follow note 396462 when installing the printer.
    HP1200
    Device type for HP LaserJet 1200/1220. HP1200 uses character set "ISO 8859/1" (Latin 1).
    HP1200 is compatible with all releases from 4.0A.
    HP2200
    Device type for HP LaserJet 2200. HP2200 uses character set "ISO 8859/1" (Latin 1).
    HP2200 is compatible with all releases from 4.0A.
    HP2250
    Device type for HP Business Inkjet 2250. HP2250 uses character set "ISO 8859/1" (Latin 1).
    HP2250 is compatible with all releases from 4.5B.
    Attention: Business Inkjet 2200 is not compatible with HP2250.
    HP2500
    Device type for HP DeskJet 2500C with PCL-5 option. HP2500 uses character set "ISO 8859/1" (Latin 1).
    HP2500 is compatible with all releases from 4.0A.
    HP3200
    Device type for HP LaserJet 3200m. HP3200 uses character set "ISO 8859/1" (Latin 1).
    HP3200 is compatible with all releases from 4.0A.
    HP4100
    Device type for HP LaserJet 4100. HP4100 uses character set "ISO 8859/1" (Latin 1).
    HP4100 is compatible with all releases from 4.0A.
    HP4550
    Device type for HP LaserJet 4550 (color laser). HP4550 uses character set "ISO 8859/1" (Latin 1).
    HP4550 is compatible with all releases from 4.5A.
    HP8150
    Device type for HP LaserJet 8150. HP8150 uses character set "ISO 8859/1" (Latin 1).
    HP8150 is compatible with all releases from 4.0A.
    HP8550
    Device type for HP LaserJet 8550 (color laser). HP8550 uses character set "ISO 8859/1" (Latin 1).
    HP4550 is compatible with all releases from 4.5A.
    HP9000
    Device type for HP LaserJet 9000. HP9000 uses character set "ISO 8859/1" (Latin 1).
    HP9000 is compatible with all releases from 4.0A.
    NEW DEVICE TYPES IN RELEASE NW04:
    BRHL
    Device type for Brother laser printer HL-2460. This device type is compatible to other Brother laser printers, see below.
    OCR-A and OCR-B fonts as well as bar codes are supported.
    BRHL is compatible with all releases from 4.5A.
    IP2085
    Device type for the IBM Infoprint 2085 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
    IP2085 is compatible with all releases 4.5A and higher.
    IP2085P
    Device type for the IBM Infoprint 2085 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
    IP2085P is compatible with all releases 4.5A and higher.
    IP2105
    Device type for the IBM Infoprint 2105 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
    IP2105 is compatible with all releases 4.5A and higher.
    IP2105P
    Device type for the IBM Infoprint 2105 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
    IP2105P is compatible with all releases 4.5A and higher.
    LEXT622
    Device type for the Lexmark T622 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
    LEXT622 is compatible with all releases 4.5A and higher.
    LEXW820
    Device type for the Lexmark W820 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
    LEXW820 is compatible with all releases 4.5A and higher.
    LEX4227P
    Device type for the Lexmark 4227plus line printer. The device type supports the Latin-1 character set. For using the device type, the IBM emulation must be set in the printer.
    OCR fonts and barcode printing from SAP are not supported.
    LEX4227P is compatible with all releases.
    I5LEX
    Device type for Cyrillic printing (e.g. Russian) with Lexmark T522 laser printer. Lexmark T522 natively supports Cyrillic fonts and character set ISO 8859-5.
    OCR-fonts are not supported. Bar code printing is supported (with a bar code DIMM, see note 119471).
    I5LEX is compatible with all releases 4.0A and higher.
    CNLX522
    Device type for Lexmark T522 laser printer with add-on "Simplified Chinese DBCS font DIMM kit" (Lexmark product number 09H0690). The device type supports Simplified Chinese. OCR-fonts and bar code printing from SAP are not supported.
    CNLX522 is compatible with all releases 4.0A and higher.
    JPLX522
    Device type for Lexmark T522 laser printer with add-on "Japanese DBCS font DIMM kit" (Lexmark product number 13K0227). The device type supports Japanese character set. OCR-fonts and bar code printing from SAP are not supported.
    JPLX522 is compatible with all releases 4.0A and higher.
    KPLX522
    Device type for Lexmark T522 laser printer with add-on "Korean DBCS font DIMM kit" (Lexmark product number 10G1705). The device type supports Korean character set. OCR-fonts and printing of bar codes from SAP are not supported.
    KPLX522 is compatible with all releases 4.0A and higher.
    TWLX522
    Device type for Lexmark T522 laser printer with add-on "Traditional Chinese DBCS font DIMM kit" (Lexmark product number 09H0691). The device type supports traditional Chinese character set. OCR-fonts and bar code printing from SAP are not supported.
    TWLX522 is compatible with all releases 4.0A and higher.
    HP5000
    Device type for HP LaserJet 5000. HP5000 uses character set "ISO 8859/1" (Latin 1).
    HP5000 is compatible with all releases from 4.0A.
    HP23
    Device type for HP LaserJet 2300. HP23 uses character set "ISO 8859/1" (Latin 1).
    HP23 is compatible with all releases from 4.5A.
    HP3000
    Device type for HP business inkjet 3000. HP3000 uses character set "ISO 8859/1" (Latin 1).
    HP3000 is compatible with all releases from 4.5A.
    HP4300
    Device type for HP LaserJet 4200 and HP LaserJet 4300. HP4300 uses character set "ISO 8859/1" (Latin 1).
    HP4300 is compatible with all releases from 4.5A.
    HP4600
    Device type for HP color LaserJet 4600. HP4600 uses character set "ISO 8859/1" (Latin 1).
    HP4600 is compatible with all releases from 4.5A.
    HP5100
    Device type for HP LaserJet 5100. HP5100 uses character set "ISO 8859/1" (Latin 1).
    HP5100 is compatible with all releases from 4.5A.
    HP5500
    Device type for HP color LaserJet 5500. HP5500 uses character set "ISO 8859/1" (Latin 1).
    HP5500 is compatible with all releases from 4.5A.
    HP9500
    Device type for HP color LaserJet 9500. HP9500 uses character set "ISO 8859/1" (Latin 1).
    HP9500 is compatible with all releases from 4.5A.
    I2HPPS
    Device type for certain HP LaserJet models with PostScript emulation (see Note 575916). I2HPPS supports character set "ISO 8859/2" (Latin 2).
    I2HPPS is compatible with all releases as of 4.0A.
    Barcode printing and OCR fonts are not supported.
    CAN105
    Device type for Canon laser printer imageRUNNER 105. CAN105 supports character set ISO 8859-1 (Latin 1).
    CAN105 is compatible with all releases as of 4.5A.
    OCR-fonts are supported, barcode printing is not supported.
    CAN22
    Device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CAN22 supports character set ISO 8859-1 (Latin 1).
    CAN22 is compatible with all releases as of 4.5A.
    OCR-fonts are supported, barcode printing is not supported.
    CAN5
    Device type for Canon laser printers imageRUNNER 5000/5000i/6000. CAN5 supports character set ISO 8859-1 (Latin 1).
    CAN5 is compatible with all releases as of 4.5A.
    OCR-fonts are supported, barcode printing is not supported.
    CAN85
    Device type for Canon laser printers imageRUNNER 8500/7200/85. CAN85 supports character set ISO 8859-1 (Latin 1).
    CAN85 is compatible with all releases as of 4.5A.
    OCR-fonts are supported, barcode printing is not supported.
    CN105PS
    PostScript device type for Canon laser printer imageRUNNER 105. CN105PS supports character set ISO 8859-1 (Latin 1).
    CN105PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CN22PS
    PostScript device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CN22PS supports character set ISO 8859-1 (Latin 1).
    CN22PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CN5PS
    PostScript device type for Canon laser printer imageRUNNER 5000/5000i/6000. CN5PS supports character set ISO 8859-1 (Latin 1).
    CN5PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CN85PS
    PostScript device type for Canon laser printer imageRUNNER 8500/7200/85. CN85PS supports character set ISO 8859-1 (Latin 1).
    CN85PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CAN400
    PCL5 device type for Canon laser printer imageRUNNER 330/400. CAN400 supports character set ISO 8859-1 (Latin 1).
    CAN400 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CN400PS
    PostScript device type for Canon laser printer imageRUNNER 330/400. CN400PS supports character set ISO 8859-1 (Latin 1).
    CN400PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CANC32
    PCL5 device type for Canon color laser printer Color imageRUNNER C3200. CANC32 supports character set ISO 8859-1 (Latin 1).
    CANC32 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    NEW DEVICE TYPES IN RELEASE SAP NetWeaver 04s:
    ARM205
    PCL-5 device type for Sharp laser printer AR-M205. ARM205 uses character set ISO 8859-1 (Latin-1).
    ARM205 is compatible with all releases as of 4.5A.
    OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
    ARM276
    PCL-5 device type for Sharp laser printer AR-M276. ARM276 uses character set ISO 8859-1 (Latin-1).
    ARM276 is compatible with all releases as of 4.5A.
    OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
    ARM450
    PCL-5 device type for Sharp laser printer AR-M450. ARM450 uses character set ISO 8859-1 (Latin-1).
    ARM450 is compatible with all releases as of 4.5A.
    OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
    ARM550
    PCL-5 device type for Sharp laser printer AR-M550U. ARM550 uses character set ISO 8859-1 (Latin-1).
    ARM550 is compatible with all releases as of 4.5A.
    OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
    ARC262P
    PostScript device type for Sharp color laser printer ARC-262M. ARC262P is compatible with all releases as of 4.5A.
    OCR fonts are not supported.
    CAN2220
    PCL5 device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CAN2220 supports character set ISO 8859-1 (Latin 1).
    CAN2220 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CN2220P
    PostScript device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CN2220P supports character set ISO 8859-1 (Latin 1).
    CN2220P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CAN5020
    PCL5 device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CAN5020 supports character set ISO 8859-1 (Latin 1).
    CAN5020 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CN5020P
    PostScript device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CN5020P supports character set ISO 8859-1 (Latin 1).
    CN5020P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC3100
    PCL5 device type for Canon color laser printer imageRUNNER C3100. CNC3100 supports character set ISO 8859-1 (Latin 1).
    CNC3100 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CNC31PS
    PostScript device type for Canon color laser printer imageRUNNER C3100. CNC31PS supports character set ISO 8859-1 (Latin 1).
    CNC31PS is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC3220
    PCL5 device type for Canon color laser printers imageRUNNER C3220/C2620. CNC3220 supports character set ISO 8859-1 (Latin 1).
    CNC3220 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CNC322P
    PostScript device type for Canon color laser printers imageRUNNER C3220/C2620. CNC322P supports character set ISO 8859-1 (Latin 1).
    CNC322P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC6800
    PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800. CNC6800 supports character set ISO 8859-1 (Latin 1).
    CNC6800 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CNC68PS
    PostScript device type for Canon color laser printers imageRUNNER C5800/C6800. CNC68PS supports character set ISO 8859-1 (Latin 1).
    CNC68PS is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC31E
    PCL5 device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31E supports character set ISO 8859-1 (Latin 1).
    CNC31E is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC31EP
    PostScript device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31EP supports character set ISO 8859-1 (Latin 1).
    CNC31EP is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC322E
    PCL5 device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322E supports character set ISO 8859-1 (Latin 1).
    CNC322E is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC322EP
    PostScript device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322EP supports character set ISO 8859-1 (Latin 1).
    CNC322EP is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC68E
    PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68E supports character set ISO 8859-1 (Latin 1).
    CNC68E is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC68EP
    PostScript device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68EP supports character set ISO 8859-1 (Latin 1).
    CNC68EP is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CN2270
    PCL5 device type for Canon laser printers imageRUNNER 2270/2870/3570/4570. CN2270 supports character set ISO 8859-1 (Latin 1).
    CN2270 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is supported with usage of the optional barcode printing kit.
    CN2270P
    PostScript device type for Canon laser printer imageRUNNER 2270/2870/3570/4570. CN2270P supports character set ISO 8859-1 (Latin 1).
    CN2270P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    DL3100
    PCL5 device type for DELL color laser printer 3100cn. DL3100 supports character set ISO 8859-1 (Latin 1).
    DL3100 is compatible with all releases as of 4.5A.
    OCR-fonts and Barcodes are not supported.
    DL3100P
    PostScript device type for DELL color laser printer 3100cn. DL3100P supports character set ISO 8859-1 (Latin 1).
    DL3100P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcodes are not supported.
    DL5100
    PCL5 device type for DELL color laser printer 5100cn. DL5100 supports character set ISO 8859-1 (Latin 1).
    DL5100 is compatible with all releases as of 4.5A.
    OCR-fonts and Barcodes are not supported.
    DL5100P
    PostScript device type for DELL color laser printer 5100cn. DL5100P supports character set ISO 8859-1 (Latin 1).
    DL5100P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcodes are not supported.
    HP3700
    Device type for HP color LaserJet 3700. HP3700 supports character set ISO 8859-1 (Latin 1).
    HP3700 is compatible with all releases as of 4.5A.
    HPBI23
    Device type for HP business inkjet 2300. HPBI23 supports character set ISO 8859-1 (Latin 1).
    HPBI23 is compatible with all releases as of 4.0A.
    HP9055
    Device type for HP LaserJet 9055mfp. HP9055 supports character set ISO 8859-1 (Latin 1).
    HP9055 is compatible with all releases as of 4.5A.
    HP9065
    Device type for HP LaserJet 9065mfp. HP9065 supports character set ISO 8859-1 (Latin 1).
    HP9065 is compatible with all releases as of 4.5A.
    I7HP4
    Device type for HP LaserJet printers with "Greek Font DIMM" (add-on module with Greek fonts). Information can be found under www.hp.com/go/sap/drivers. I7HP4 supports character setISO 8859/7 (Greek).
    I7HP4 is compatible with all releases as of 4.6B.
    HP4250
    Device type for HP LaserJet 4250 printer. HP4250 supports character set ISO 8859-1 (Latin 1).
    HP4250 is compatible with all releases as of 4.5A.
    HP1160
    Device type for HP LaserJet 1160 printer. HP1160 supports character set ISO 8859-1 (Latin 1).
    HP1160 is compatible with all releases as of 4.5A.
    HP1320
    Device type for HP LaserJet 1320 printer. HP1320 supports character set ISO 8859-1 (Latin 1).
    HP1320 is compatible with all releases as of 4.5A.
    HP2430
    Device type for HP LaserJet 2430 printer. HP2430 supports character set ISO 8859-1 (Latin 1).
    HP2430 is compatible with all releases as of 4.5A.
    HP3030
    Device type for HP LaserJet 3030 printer. HP3030 supports character set ISO 8859-1 (Latin 1).
    HP3030 is compatible with all releases as of 4.5A.
    HP4650
    Device type for HP Color LaserJet 4650 printer. HP4650 supports character set ISO 8859-1 (Latin 1).
    HP4650 is compatible with all releases as of 4.5A.
    HP5550
    Device type for HP Color LaserJet 5550 printer. HP5550 supports character set ISO 8859-1 (Latin 1).
    HP5550 is compatible with all releases as of 4.5A.
    HP9850
    Device type for HP 9850mfp. HP9850 supports character set ISO 8859-1 (Latin 1).
    HP9850 is compatible with all releases as of 4.5A.
    HPLJ9050
    Device type for HP LaserJet 9050 printer. HP9050 supports character set ISO 8859-1 (Latin 1).
    HP9050 is compatible with all releases as of 4.5A.
    HPOJ9130
    Device type for HP officejet 9130. HPOJ9130 supports character set ISO 8859-1 (Latin 1).
    HPOJ9130 is compatible with all releases as of 4.0B.
    HP4345
    Device type for HP LaserJet 4345mfp. HP4345 supports character set ISO 8859-1 (Latin 1).
    HP4345 is compatible with all releases as of 4.5B.
    HP9040
    Device type for HP LaserJet 9040mfp. HP9040 supports character set ISO 8859-1 (Latin 1).
    HP9040 is compatible with all releases as of 4.5B.
    HP9050
    Device type for HP LaserJet 9050mfp. HP9050 supports character set ISO 8859-1 (Latin 1).
    HP9050 is compatible with all releases as of 4.5B.
    HP9500M
    Device type for HP LaserJet 9500mfp. HP9500M supports character set ISO 8859-1 (Latin 1).
    HP9500M is compatible with all releases as of 4.5B.
    IP2060
    Device type for the IBM Infoprint 2060ES Laser printer with printer language PCL-5. IP2060 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2060 is compatible with all releases 4.5A and higher.
    IP2060P
    Device type for the IBM Infoprint 2060ES Laser printer with printer language PostScript. IP2060P supports character set ISO 8859-1 (Latin 1).OCR font and bar code printing from SAP are not supported.
    IP2060P is compatible with all releases 4.5A and higher.
    IP2075
    Device type for the IBM Infoprint 2075ES Laser printer with printer language PCL-5. IP2075 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2075 is compatible with all releases 4.5A and higher.
    IP2075P
    Device type for the IBM Infoprint 2075ES Laser printer with printer language PostScript. IP2075P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2075P is compatible with all releases 4.5A and higher.
    IP2090
    Device type for the IBM Infoprint 2090ES Laser printer with printer language PCL-5. IP2090 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2090 is compatible with all releases 4.5A and higher.
    IP2090P
    Device type for the IBM Infoprint 2090ES Laser printer with printer language PostScript. IP2090P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2090P is compatible with all releases 4.5A and higher.
    IP2105E
    Device type for the IBM Infoprint 2105ES Laser printer with printer language PCL-5. IP2105E supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2105E is compatible with all releases 4.5A and higher.
    IP2105EP
    Device type for the IBM Infoprint 2105ES Laser printer with printer language PostScript. IP2105EP supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2105EP is compatible with all releases 4.5A and higher.
    OKI6100
    Device type for OKI laser printer B6100. OKI6100 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI6100 is compatible with all releases as of 4.5A.
    OKI8300
    Device type for OKI laser printer B8300. OKI8300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are not supported. Barcode printing is supported with an OKI add-on product.
    OKI8300 is compatible with all releases as of 4.5A.
    OKI9500
    Device type for OKI color laser printer C9500. OKI9500 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI9500 is compatible with all releases as of 4.5A.
    OKI4350
    Device type for OKI laser printer B4350. OKI4350 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI4350 is compatible with all releases as of 4.5A.
    OKI5400
    Device type for OKI color laser printer C5400. OKI5400 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI5400 is compatible with all releases as of 4.5A.
    OKI6300
    Device type for OKI laser printer B6300. OKI6300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI6300 is compatible with all releases as of 4.5A.
    SML1451, SML1451

  • Exporting to PDF fails when report includes a barcode

    Post Author: Lorne Chisholm
    CA Forum: Exporting
    I am getting the following error when I try to export a Crystal Report file to a PDF format:
    CRAXDRT Error Occured on Server. -2147189152: Cannot find the QE property
    I am able to export the report to RTF or Excel format without getting any errors.  I am also able to export the same report if I remove the barcoded field.  The font I am using is Bar Code 39.  The version of Crystal Reports that I am using is 11.
    I would like to know what the QE property is and more importantly how to resolve this issue.  Any help on this issue would be greatly appreciated.
    Lorne

    Post Author: mhamill
    CA Forum: Exporting
    I have a similar problem.    I am trying to print a report via the WEB.   I have the font installed on the webserver but the print function does a conversion to PDF prior to printing.   The barcode font does not appear in the PDF file and therefore does not pront properly. I dont get an error, it just kills the Barcode Font and prints the text.  I installed the Bacode functions on my design machine but what needs to go on the server besides the font ?
    Did you ever resolve this issue?
    Thanks

  • How to print Barcode in te SAP SCRIPTS?

    Hi All,
    Can anyone of you let me know how to print the Barcode in the SAP SCRIPT? This is the first time I'm working on the Barcode. I've to print many fields data into one barcode. Like PO number, Material Number, Plant, Company code..etc..
    Best Regards,
    Venkatesh Eddala.

    Hello Venkat,
    Creating Bar code:
    -->From trans code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    --> when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    -->Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    -->The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Which barcode printer are you using ? Can you download this file and see.
    http://www.servopack.de/Files/HB/ZPLcommands.pdf.
    It will give an idea about barcode commands.
    SAP Barcodes
    -->Barcode solution consists of the following:
    barcode printer
    barcode reader
    mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    for your reference check the below links:
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    for smart, please check the below link:
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    See the below program forbarcode in sapscript for your reference:
    DATA: BAR_CODE1(16) VALUE `ABC01230123A01'
    NEW-PAGE PRINT ON IMMEDIATELY `X'.
    FORMAT COLOR OFF INTENSIFIED OFF.
    If the barcode is the first element on the page, the following Write
    statement is needed (otherwise you get a date in the first print
    control.
    WRITE:/
    Turn on the barcode font, print the data, and switch back to the
    printer's default font. Be sure to use NO-GAP to avoid unwanted
    characters or CR/LF.
    PRINT-CONTROL FUNCTION `BCPFX'
    WRITE: BAR_CODE1 NO-GAP
    PRINT-CONTROL FUNCTION `BCSFX'
    Add a Write statement to prevent insertion of CR/LF into the barcode.
    WRITE:/
    Sample SAPSCRIPT
    Variable BAR_CODE1 contains the barcode data, including asterisks.
    The & is needed to avoid unwanted spaces or CR/LF characters
    /E LINE
    /: PRINT-CONTROL BCPFX
    = &BAR_CODE1&
    /: PRINT-CONTROL BCSFX
    Venkat - Please reward points for previous therad if you feel good answer ...
    Thanks
    Seshu

  • Read Only Barcode Issue

    I have a form that was imported from a PDF document in Adobe LiveCycle Designer ES 8.2.  I added a 3 of 9 barcode and the Default value is the form number (*1.764903.105NFS*).  I do not want a user to be able to click on the barcode, so I made it Read Only.  When this form is opened in Adobe Acrobat, I'm not able to click on the barcode, however, when this form is opened in Adobe Reader, I'm able to click on the barcode and the value displays (the form number) - which is what I do NOT want to happen. I have added Adobe Reader Extensions and I'm opening the form in Adobe Reader 9.4 and Adobe Acrobat Professional 7.0.
    Also having the same barcode issue with forms that are designed in LC Designer.

    you can verify your selectionListener event by creating your own custom selection listener
    public void mySelectionListener(SelectionEvent selectionEvent) {
    FacesContext fc = FacesContext.getCurrentInstance();
    String me = "#{bindings.myViewObject1.collectionModel.makeCurrent}"
    MethodExpression myMethodExpr = fc.getApplication().getExpressionFactory().createMethodExpression(fc.getELContext(),me, null, new Class[] {SelectionEvent.class});
    myMethodExpr.invoke(fc.getElContext(), new Object[] {selectionEvent});
    RowKeySet rwKeySet = selectionEvent.getAddedSet();
    and in your jspx <af:table selectionListener="#{package1.view.backing_myBackingBean.mySelectionListener}"/>
    by that way you can atlest verify whats wrong... ,hope this helps,

Maybe you are looking for