Importing file error

Hi all. I was recently on a job and got a band member to record me some clips on his camera. Adobe CS6 is having issues importing the videos he filmed. See images:
Am I right in assuming I must convert the files to Mpeg-2 which is a more CS6 friendly format?
Thanks

H.264 will not work inside an AVI wrapper http://forums.adobe.com/thread/854115
-Insignia camera uses H.264 to either AVI... or SOME models to MOV wrapper
-so use the MOV wrapper if YOUR Insignia camera offers that option
-Says VLC will convert in reply #6 http://forums.adobe.com/thread/1172956

Similar Messages

  • Scenario Export /Import Issue: Import file error

    The Procedure scenario when I am trying to import in higher environment, it is giving me error " Import file error" and when I click on Details, it shows following message.
    I am trying to import scenario with INSERT/UPDATE mode and trying to replace with the same version. The scenario is executing fine in dev environment. What could be the cause. I have tried importing the same, 2-3 times ...even on different days with connecting and disconnecting the repository. What could be the reason. I am exporting the scenario from designer/procedure/scenario. using same option, I have exported the scenario many times but did not get any issue so far while importing into higher environment
    &Exception track Trace 1 of 1
    com.sunopsis.dwg.SQLWorkReposException: ORA-00942: table or view does not exist
         at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
         at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
         at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:953)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1224)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3467)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
         at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
         at $Proxy3.executeUpdate(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.odi.core.datasource.support.RuntimeClassLoaderDataSourceCreator$StatementInvocationHandler.invoke(RuntimeClassLoaderDataSourceCreator.java:163)
         at $Proxy4.executeUpdate(Unknown Source)
         at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
         at com.sunopsis.dwg.dbobj.generated.GeneratedSnpObjectId.insertAction(GeneratedSnpObjectId.java:271)
         at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2885)
         at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2908)
         at com.sunopsis.dwg.DwgObject.createMissingReference(DwgObject.java:6779)
         at com.sunopsis.dwg.DwgObject.correctMissingReference(DwgObject.java:6636)
         at com.sunopsis.dwg.DwgObject.correctMissingReferences(DwgObject.java:7206)
         at com.sunopsis.dwg.DwgDuplicationTools.createMissingRefAndReInsert(DwgDuplicationTools.java:2790)
         at com.sunopsis.dwg.DwgDuplicationTools.importOtherObjects(DwgDuplicationTools.java:2385)
         at com.sunopsis.dwg.DwgDuplicationTools.synonymImport(DwgDuplicationTools.java:1835)
         at com.sunopsis.dwg.DwgObject.importFromObjectLst(DwgObject.java:6205)
         at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:5705)
         at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5365)
         at com.sunopsis.dwg.DwgObject.importFromXmlWithCommit(DwgObject.java:5410)
         at com.sunopsis.graphical.dialog.SnpsDialogImportXml.doImport(SnpsDialogImportXml.java:360)
         at com.sunopsis.graphical.dialog.SnpsDialogImportXml$1.doInBackground(SnpsDialogImportXml.java:1221)
         at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker$1.call(SwingWorker.java:240)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker.run(SwingWorker.java:278)
         at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
         at java.lang.Thread.run(Thread.java:662)

    actdi wrote:
    This error is weird.+1 thats what I was thinking.
    OP - Are you exporting from a Development work repos to an Execution Repos or another Dev Repos?

  • Duplicate Import File Error

    Help!! I am trying to import our purchase records into Zenworks Configuration Management. I tried an import yesterday and it did not work because it said I did not have any headers. So today I revamped the spreadsheet today and only put one item on the sheet. I then saved it as a tab delimited .txt file and tried to import it. It errors out saying:
    "No new items were created. This looks like a duplicate import. Fatal Error - Duplicate Import File 0 "
    But when I go to purchase records there are none. So where or what needs to be cleaned up so it doesn't think there is already a record?
    Please respond! Thanks for the help!

    amyke,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • IMPORT FIle Error

    hi,
    I am using oracle express edition 10g in os linux ,
    i hv create export dump file easy_defination.dmp in my own schma ,all granted to my user but when take a import some error is occured.
    IMP-00003
    ORA-00959 :tablespace CDLS_ADMIN does not exit
    IMP-00017
    how can sole this problem

    If the objects are explicitly created in a particular tablespace imported where such a tablespace is not present, then you will get this error.
    create table dept(deptno number,dname varchar2(10),loc varchar2(10)) tablespace USERS;
    While importing dept in another database for example and if tablespace USERS does not exist then you will get this complain.
    If objects are not created explicitly then uncle oracle will put all these objects in the destination user's default tablespace. Make an experiment on this to crystallize it.
    If you still face the problem, post here the complete log and let us see what we can do for you.

  • APEX 2.2 application import file error

    Hi all,
    When trying to import an apex export file and clicking NEXT button, got error on page. Nothing happens! Still remains at first step.
    What is wrong?
    Im have a brand new apex 2.2. install in a Ora 10g rel2 DB.
    I created a workspace and now Im logged in to that workspace.
    First I created my apps on a standalone Application Express 2.1.0.00.39
    Now i'm trying to importing this in apex 2.2
    here is a listing:
    Product Build: 2.2.0.00.32
    Schema Compatibility: 2006.02.24
    Last DDL Time: 11/21/2006 04:41:57 PM
    Host Schema: APEX_PUBLIC_USER
    Application Owner: FLOWS_020200
    Workspace ID: 825125856768784
    Workspace Name: PTL
    Current User: ADMIN
    Language Preference: en-us
    Current Time (on server): 11/23/2006 11:48:51 AM
    NLS_CHARACTERSET: WE8ISO8859P1
    DAD CHARACTERSET: CP850
    JOB_QUEUE_PROCESSES: 0

    got error on page.
    Nothing happens!Of course, those are contradictory statements. What "happened" was that a javascript error occurred. Use a browser tool to get the details of the error.
    Maybe you did not follow all of the installation steps (web toolkit patch, edit conf files, etc.).
    DAD CHARACTERSET: CP850This looks incorrect. The DAD charset must be AL32UTF8.
    Scott

  • While importing file error msg - 7.5NW

    Hi,
    I am working on 7.5 NW, when i am trying to import the transaction data I am getting the following error.
    XML file (...OR\TRANSFORMATION FILES\EXAMPLES\TRANSFORMATION.TDM) is empty or is not found
    I am new to 7.5, please help me in this regard. Thanks in advance.
    Raghu B.S.

    Hi Rich ,
    I am stepping in for Raghu.
    I have tried your suggestion , but still , I am getting the same error message. While importing the file in DM , I am not getting "import.xls" in transformation file option .
    Thanks
    Vijay

  • Unreadable Files: cannot import files error message

    I am trying to import old photos from a previous hard drive and get the following message-
    Unreadable Files: (# of files)
    The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
    Then it will have the files and their locations that I am trying to open in the box below. These files can be opened with no problems using Adobe Photoshop Elements 3, Canon's Image Browser as well as Preview. They originally came in as digital photos from a Canon digital camera. They used to be able to open in iPhoto with no problem. They either have a [.JPG] extension or none at all. There are a lot of them. Could it be they were used by an older version of iPhoto and are unrecognizable in this one?
    I am running iPhoto 4.0.3 Any suggestions?

    David:
    You just reminded me of one more thing you can try. Log in to another account on your iMac and see if iPhoto will import as it should. If it does then it's a problem with your primary account. One cause might be another preference file that's in conflict with iPhoto. You can use Preferential Treatment to check for any corrupt or damaged user or system preference file. It's not foolproof however. If none are found and it sill won't import, then you can try the following method developed my another user:
    Trouble Shooting Preferences
    Go to HD/Users/Your_name/Library. Move the Prefs folder (in its entirety) to the desktop. Start iPhoto. Determine if problem is fixed.
    If the problem IS fixed, then go to the new Prefs folder that the OS will have created and open it up. Except for those items that are obviously not related, move the contents to the old Prefs folder on the desktop, replacing what had been there. When in doubt, move the item. The worst thing that can happen is a harmless "alert" message. Then, trash what remains of the new folder. Finally, move the old (but modified) Prefs folder back to the library.
    If the problem is NOT fixed, trash the new Prefs folder and move the old one back to its original location.
    If stlll no go, I'd try reinstalling the 10.2.9 COMBO updater followed by a permissions repair.

  • "File error: unknown file" upon movie import

    Got a DVD. Extracted the footage with Mac the ripper. Created an mp4 file with Handbrake. It plays fine in Quicktime at 720 by 480 and 23.98 FPS. I've tried importing it into FCP and I get the error, "File error: unknown file". FCP sequence presents are 24 FPS...I've also tried switching it to 23.98 FPS. I've re-encoded the movie in Quicktime to a .mov file with "DV/DVCPRO - NTSC" compression and it still will not import. Any suggestions?

    Tried making an AVI in Handbrake. Handbrake just froze everytime and it would never finish.
    I should also note that FFMpeg did not like the footage either and would not convert it to a file of any kind.
    So I put the DVD into a consumer DVD player and used my Panasonic DVX100B camera to record the footage in VCR mode. The tape turned out fine.
    BUT...
    I am trying to capture the footage from another low end Canon camera. Usually there is no problem. However, with this particular footage from this cursed DVD, I get a "general error" when I try to capture the footage in FCP.
    No matter what file format or media is used, this footage will not import into FCP. It must be watermarked to not like FCP.
    Any further suggestions???

  • File Error:  Unknown file.  - Importing problem

    I recently had some problems getting my FCP 5.0.4 to launch. To make a long story short someone in this forum said that my version of FCP was out of date with my current Macbook Pro running 10.5.5. I found this a little odd because I've had this computer for over six months and have been running FCP the whole time without a single problem. Since funds are tight and I don't have the money upgrade I did some troubleshooting to see if I could make it work again.
    I did remember that I had recently moved some of my older quicktime codecs into my library/quicktime folder and when I removed them I was able to launch and run FCP.
    Now when I try to import files I'm getting a "File Error: Unknown file" error message. I am able to view all the quicktimes and am only able to import a few quicktimes. I have quicktimes from the last six years that I'm trying to import so there's a good variety of different codes that were used. But I am able to watch all of the quicktimes via Quicktime.
    Any suggestions why I might be getting this problem? Any way to fix this without upgrading? Thanks

    *I recently had some problems getting my FCP 5.0.4 to launch.*
    The reason is because that version of for PPC Macs, and you have an Intel Mac.
    *Someone in this forum said that my version of FCP was out of date with my current Macbook Pro running 10.5.5*
    It doesn't matter which OS version is running. You need an Intel/UB version of FCP to run on a Intel Mac.
    *Any way to fix this without upgrading?*
    It's not a problem. It's an incompatibility. Because you have run it for some time without an incident is incidental to its incompatibility.

  • ERROR, while i importing file in Integration Builder/

    Heading 2: HI every body !!!!
    please help me.
    Now' i'm integrate SAP r/3 and IBM MAXIMO via SAP XI3 (SAP netweaver 2004s)
    i need to import file to integration builder, while i'm importing it, I'"ve got the error:
    ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
    sapmaximo\sapmnt\IPC\SYS\global\security\data\SecStore.properties" does not exist although it should..
    Also i did PrtSc
    Link:[http://ipicture.ru/Gallery/Viewfull/17818229.html]
    I am a beginner in sap netweaver please tell how to solve this step byb step

    I need to import file (XI3_0_IMEA-INTEGRATE_IMEA71-mySAPERP2005_of_ibm.com_5.tpz),it''s in another format , so
    i find on this forum the same error Link: [Error while generating Rules in GRC5.3  RAR Component;
    the solution of this error ---"
    Another reason for this error can be lack of resources or pool size of the server. The recommended settings for the Pool size are :
    Max Pool size : 50
    Max connections : 100
    Connection Timeout : 10 sec
    Max wait time : 30 sec"
    Can you tell me where i can configurate this settings? (step by step)

  • File Error While Importing Video

    I am having a problem with importing some mp4 files I just ripped off of a DVD into FCP. The message I get when trying to import is:
    File Error: 1 File(s) recognized, 0 access denied, 1 unknown
    The Files are MPEG-4 and were ripped and converted by MacTheRipper and HandBrake. The only solution I could find is to change all video's to the same as my sequence (Such as NV-NTSC) before importing. Problem is, how do I check the format on a video file? And then convert it if it's not the same?

    Those formats aren't editable formats. Don't use MacTheRipper nor Handbrake for encoding footage for FCP. Use MPEG STREAMCLIP (www.squared5.com) and use the DV/NTSC setting.
    Read this.
    Shane

  • I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

    I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

    Did you look in iTunes?

  • Error During Import: File Could Not Be Imported

    I am trying to load some .AVI movies from my digital camera into iMovie; most of them will, but 1 or 2 for some reason will not. I have played some of these videos on my old G3, which I replaced with this new computer; most loaded in OK.
    The clips that won't load look smaller than the others when playing (don't know why). I played the movies and converted them to Quicktime again in MPEG Streamclip and they played fine (also in VLC PLayer, FWIW).
    I am getting this error message: Error during Import: File Could Not Be Imported.
    Also, I am trying to change the orientation of one clip that I inadvertently shot sideways; I did this in Bitlist but it won't load now into iMovie. Is there away to change the orientation in Quicktime (I'm not buying QT pro) or another free converter that will work?
    Thanks in advance...

    try to ...
    * open the avi/mpegs in Streamclip
    * choose 'DV stream' as export option
    * in the 'DV stream' dialog, you're offered the option 'turn'.. rotate in the wanted direction and choose '75%' size to get all into the video...

  • After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive??

    After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive?? 

    Janet.b wrote:
    About 3 years old...pretty dated now I guess.  Am thinking I may just need to have it upgraded by a Mac tech.
    For what the Apple Store's charge you can buy almost buy a new computer.
    Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
    I did the drive replacement myself, got a faster drive of better quality for $300 instead.
    Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
    The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
    So you see what's going on here.
    I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
    They can offer more personalized care which you need. Clone your old drive to the new and everything.
    With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
    For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

  • Error when import file with non-english character

    Hi,<br /><br />I have images file with non-english character (unicode), for example ABC<X>.png where <X> is non-english character such as japanese, chinese, etc.<br /><br />Whenever I want to import the file to After Effects (right click -> import -> file), I always encounter error:<br /><br />Finding file/dir info for the file "C:\...\ABC?.png" -- file not found (-43) (3::30)<br />Can't import file "ABC?.png": unsupported filetype or extension. (0::1)<br /><br />My PC is Windows XP Professional 2002 SP2 English.<br /><br />How to solve this problem?<br /><br />Thanks

    Adjust your system language settings. Proper file name conventions require a consistent Unicode environment, so install the respective foreign language support files or switch the language system-wide. Mixing different zones/ code ranges is always a bad idea. If your system is not in Japanese, AE will always misinterpret the characters and refuse to import. If that's not feasible, simply rename the files.
    Mylenium

Maybe you are looking for