Importing In different DBProvider name : Urgent

Hi,
I am trying to export a DataBase Provider from one Portal to another Portal environment. The case is that I want to import the exported DBprovider with a different name into the destination Portal environment..
Is this Possible to be done ...
Thanks in Advance

Bob,
It appears that you can import duplicate named files by unchecking the "ignore Duplicates' box--the first time you import files (or a file) from a folder. But, if you go back to that folder to use 'import' to update, then the import takes place immediately bypassing the screen with the "ignore Dulicates' box on it--I presume it assumes that you would not want to change any of the original settings for an import from a given folder.
The point is you had better leave it unchecked always if you want duplicates ingested intially or later on reimport.

Similar Messages

Problem in importing two different classes with same name...

I have to import two different classes in my program with the same name....
import org.apache.lucene.document.Document;
import org.w3c.dom.Document;
//    I AM USING THE DOCUMENT FROM W3C PACKAGE HERE....
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                 DocumentBuilder builder = factory.newDocumentBuilder();
                 InputSource is = new InputSource( new StringReader( tempString ) );
                 d = builder.parse( is );
                 NodeList images = d.getElementsByTagName("img");
                 int length = images.getLength();
                 for(int i = 0;i<length;i++)
                     Node image = images.item(i);
                     String tempAltText = image.getAttributes().getNamedItem("alt").getNodeValue();
                     altText = altText.concat(" ").concat(tempAltText);
                 }and the error i am getting is
[javac] C:\Documents and Settings\sumit-i\WolframWorkspaces\Base\WolframNutch\src\java\com\wolfram\nutch\indexer\InfoCenterFilter.java:20: org.apache.lucene.document.Document is already defined in a single-type import
    [javac] import org.w3c.dom.Document;
    [javac] ^
    [javac] C:\Documents and Settings\sumit-i\WolframWorkspaces\Base\WolframNutch\src\java\com\wolfram\nutch\indexer\InfoCenterFilter.java:132: incompatible types
    [javac] found   : org.w3c.dom.Document
    [javac] required: org.apache.lucene.document.Document
    [javac] d = builder.parse( is );
    [javac] ^
    [javac] C:\Documents and Settings\sumit-i\WolframWorkspaces\Base\WolframNutch\src\java\com\wolfram\nutch\indexer\InfoCenterFilter.java:133: cannot find symbol
    [javac] symbol : method getElementsByTagName(java.lang.String)
    [javac] location: class org.apache.lucene.document.Document
    [javac] NodeList images = d.getElementsByTagName("img");
    [javac] ^
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] 3 errorsany idea ..how to resolve it
Edited by: ping.sumit on Jul 16, 2008 3:39 PM
Edited by: ping.sumit on Jul 16, 2008 3:40 PM

now i changed the code to
import org.apache.lucene.document.Document;
import org.w3c.dom.Document;
org.w3c.dom.Document d = null;
try{
     System.out.println("in author");
               URL url = new java.net.URL(urlString);
               java.net.URLConnection conn = url.openConnection();
               BufferedReader in = new BufferedReader(new InputStreamReader(conn.getInputStream()));
               while ((in.readLine()) != null)
                    //tempString = tempString.concat(in.readLine());
                    String temp = in.readLine();
                    tempString = tempString + " " + temp;
               System.out.println("the string in author" + tempString);
                in.close();
                DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                 DocumentBuilder builder = factory.newDocumentBuilder();
                 InputSource is = new InputSource( new StringReader( tempString ) );
                 d = builder.parse( is );
                 NodeList images = d.getElementsByTagName("img");and their is only one error i am getting ...and that is
[javac] C:\Documents and Settings\sumit-i\WolframWorkspaces\Base\WolframNutch\src\java\com\wolfram\nutch\indexer\InfoCenterFilter.java:20: org.apache.lucene.document.Document is already defined in a single-type import
    [javac] import org.w3c.dom.Document;
    [javac] ^
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] 1 error

Import table with a different table name!

Dear All,
I have backup all users in my database using exp command.
Now i want to import 2 tables from this backup, as tables already exists i want to import table with different table name.
Is it possible with exp command? If not what else is the solution.
Thanks, Imran

Hi..
Now i want to import 2 tables from this backup, as tables already exists i want to import table with different table name.Is it possible with exp command? If not what else is the solution.
>
Well, its not possible.You can import those two tables in some test database, rename them and then take the export and import in the database you want.
Or,
You can import those 2 tables in some other schema in your database, rename them again take the export and them import it.
Anand

Tp import eroor: Systems name (DB0) is different from name in TADIR (PA0)

Experts,
I am receiving the error:
ERROR: SAP System not installed properly. Systems name (DB0) is different from name in TADIR (PA0)
when trying to execute the command:
tp import DB0K900022 DB0 client=300 u1268 pf=/usr/sap/trans/bin/TP_DOMAIN_PA0.PFL
I am peforming this from solution manager unix command line. I have a single transport domain where all systems and landscapes(ie. ECC, SRM, BW etc) are included.
I am trying to perform this without having to log on to each system to execute the command and import.
Any advice is appreciated. Thanks.
David Carr
Basis Administrator

Hello David Carr
Why don't you logon to your domain controller and process the transport request through STMS, if setup correctly you don't have to logon to each seperate SAP system either, you can access each import queue from there.
Kind regards
Tom

How do you do a quick transfer of data from one TX to another TX with different user name

I have more than one TX and want to keep most of the information, addresses, media, calendar as well as third party software the same on all my TX's. Is there a way to do this without the long hassle of exporting all that can be exported, and then importing it into each TX. Then adding all the third party software again? I have a new TX and remember how long this takes, so I am hoping for a faster method. I already know how to do a transfer if using the same user name, but this won't work when each will have a different user name in order to hotsync.
This may be a different question. All the TXs will be used and will sync to the same computer via USB, and all are on the Palm Desktop. I want to use them interchangeably. I would also like to keep the information current on all of them, as I now must copy paste any new info (ex. new address) into each via either palm desktop, or beaming to the others. Often this leads to discrepancies of the data between the different TXs.
Post relates to: Palm TX
Message Edited by Silfox on 06-22-2009 09:03 AM

You might look into a program called "SyncUs" from an author in the UK. It will keep all the PIM data synced between two Palm OS units.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

When importing a CD, the CD Lookup Results dialogue box came up and I choose the wrong CD title. Now iTunes is importing a different song list than the one on my CD. How can I retrieve the CD Lookup Results to choose the correct title?

When importing a CD, the "CD Lookup Results" dialogue box came up and I choose the wrong CD title. Now iTunes is wanting to import a different song list than the one on my CD. I've shut down my computer and opened iTunes from the hard drive Program Files and tried to import the CD again with the same problem. How can I retrieve the "CD Looup Results" diaglogue box to choose the correct CD title to fit the song list on my original CD?

You might also be able to do it without importing the songs again I think. Just highlight the tracks, right click them and choose "Get Track Names". This feature only works on CDs that were imported via iTunes.

Import to different tablespace

Hi all..
I created dump file in one database with tablespace1 in Oracle 10g XE using expdp
and
now i want to import that dump file in another database with different tablespace2 name.
What is the option for this...?
Thanks in advance
Pal

Change the default tablespace of the user, under which the dump is to be imported, to a different tablespace.
Once importing is done, you can restore the tablespace.

How to import songs by file name (not by song name)

Hi
I've got many files with different names yet they all have same song name (the website precisely!!!). When I import them into iTunes, all of them appear with same song name (such as www.apple.com). Is there anyway I can import them by file name as song name???
Thanks

iTunes uses the id3 tags, not the file name to determine the information that is displayed. There is no way that I know of to change this. Are you saying the songs have the same title, artist name, and album name but they're different songs?
Check out Doug's Scripts. There may be something useful there.
http://dougscripts.com/itunes/index.php

Import from Picasa - Album names

I'm in the process of migrating from Picasa to Lightroom and have a number of questions. I'm posing these separately to help others search later Should the thread be worthwhile.
One is:   Is there a way to get the Picasa album name into metadata somehow (presumably as a keyword)?
I will be setting a keyword to indicate the images come from Picasa.

Please bear with me, I think you have compressed a couple of steps.
You're suggesting that Picasa is embeding the album name in 'the' image file, either the edited copy or an exported version?
And that there is noting in LR or plug-ins to directly grab this data, rather I have to spelunk around the picasa forums & docs.
Ive been using Picasa in a somewhat unthoughtful manner (I suspect like many), both for library organisation and for most simple image adjustments.
Typically, after import from camera, basic adjustments are made, bad images deleted.
For 'events' (a vacation or Christmas) Id create an album and copy the non reject images there. (Sometimes from 2, and on a couple of occasions, 3, cameras).
Then for major events, Id create a 'best of' album inside that.   The edits in the different albums may differ (mainly cropping).
My basic migration plan was to move the various image folders under one umbrella (using windows) then import that folder in one go to LR.
Ideally, in order not to lose anything Id like to import the whole mess as is.   Particularly including the original which handily are in a distinct folder. However that leads to what was going to be the next question.
Am I correct that fundamentally Lightroom will be importing image folders (that happen to have been handled by Picasa)? Thus folders will contain images in 3 states
- unedited, ie original
- edited but edits not saved, image file is still original
- edited and saved, original image moved to 'originals' folder, and current image file updated.
Just to complicate things, because for a long time I did not fully understand how to use non-destructive editing, I would create different versions of an image with different file names as I experimented with different edits.   I dont expect to weed out those duplicates on migration; for the major collections Ill deal with it in Lightroom. (many duplicates will just be deleted - but this is a rainy Sunday project to clean house).
So the next question is - how can I tell in LR what the 'status' of an image is (other than in the originals folder which is easy)?
Presumably a preparatory step is to make sure Picasa has saved all edits back to the folder.   (Select all images in entire Picasa library and 'save' ?)
At least the second category is then eliminated.
I imagine Im not the only one with this kind of mess... my next question is, are there standard approaches to the migration process?   I think my goals are, in order:
- not to lose any originals
- to be able to get to the original of any image with certainty
- where possible to also have the latest / best picasa edited version

SSO through the BOE repository manager for different user names.

Hi all.
I have a task to provide a SSO access from Portal to the Crystal reports, stored in the BO folder.
I've configured everything following the configuration guides, including:
1. SSO by SAP Logon Ticket with the back-end system.
2. System in portal SLD. Connection tests passed successfully.
2. BusinessObjects Enterprise repository manager (BOErm) in KM.
I've created in the Portal a test user with the same name as in the back-end system. Everything works fine.
But I SSO doesn't work if users are different.
The problem is that production users have different names in the Portal and in the back-end system.
I cannot find how can I configure user mapping for access reports through the BOErm.
I changed the Logon Method in the portal system from SAPLOGONTICKET to the UIDPW but it didn't help.
Seems like BOErm doesn't use the portal system at all and always connects to the back-end by SAPLOGONTICKET method.
Can anybody help me to solve my problem?
How can portal users access folders in the back-end system where they have different users names?
Thank you in advance.
Mikhail.

Hi,
just to clarify it a bit more.
You have a SAP EP woth SSO to BO. Whats the Datasource ? R/3, BW, CRM ?
Usually the names of the users are identical on the SAP EP and the Backend like BW.
You just have to confiure SSO (like you did), import the roles from BW to BO, grant permissions on EP (that the users/roles can see the iView), grant permissions on BO (that the users/roles have access to the report) and you should be fine.
Where is the mismatch of the Usernames ? Between SAP EP and Backend like BW ?
SAPLOGONTICKET is the only authentication method you can use between SAP EP and BO
Regards
-Seb.

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Song names imported as "artist - track name" instead of "track name"

When I add a folder to my library (a folder which contains MP3 files which all contain complete ID3 tags), about 50% of the song names get imported as "artist - track name" instead of just "track name". If I click on any track which was imported like this, and right-click and select "get info", the track name shows up correctly in the dialog box, and it suddenly fixes the display on the listing (without me doing anything).
I could fix each song by clicking "get info", but I would have to do this for all my songs, which would take far too long. Is there any way to get iTunes to import these track names correctly? Or is there a way to refresh the listing, and have iTunes re-read the ID3 tags on the MP3 files?
Windows XP Pro

To get the track names etc., when importing a CD, you have to be connected to the Internet.
This article explains why.
To get the info later, select all tracks (with the generic track names) of an album and choose 'Get CD Track Names' from the Advanced menu in the menubar.
Very often the correct information will show up.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

Transfer structure have two different tech names?

Hi BW experts,
we got issue in transfer structure which have two different technical names:
ZCUSTOMER_DC and
ZCUSTOMER_PS
where zcustomer is the info source name.
The impact: PSA data can't be accessed ...
Any help and feedback is highly appreciated!
Regards,
Lilly

Hi Dinesh,
Thanks for your feedback.
Unfortunately, this issue is thru our system landscape incl. production. If I try to delete the DS assignment I will lose data in the PSA, right?
However, I did try to delete the DS assignment and delete the info source (the one which is available on dev only), failed, the message I get is info object xyz still being used in communication structure (I believe it must the TS with old prefix), deletion not possible.
The problem is I am not able to delete the TS with old prefix , because it is not visible in system (AWB).
Any further feedback appreciated

How to pass database logon info to a Crystal Report in a subreport with different server name using VS C #

Post Author: fabu1971
CA Forum: .NET
I could pass the database logon in Reports with subreports but the reports with subreports with different server name I can not pass the logon information . Do you have any idea how I can do that to pass the database logon with different database or server name ?

Post Author: quafto
CA Forum: .NET
You can use the Subreports collection of the ReportDocument object to access all the subreports in your main report. These are returned as ReportDocument objects. Once you have your subreport as a ReportDocument you can loop through your Tables collection and set the ConnectionProperties to your appropriate Server/Database. For example here is some pseudo code: ConnectionInfo boConnectionInfo = new ConnectionInfo();boConnectionInfo.ServerName = "serverName";boConnectionInfo.DatabaseName = "databaseName";boConnectionInfo.UserID = "username";boConnectionInfo.Password = "yourpassword"; foreach(ReportDocument boSubreport in mainReport.Subreports){ foreach(Table boTable in boSubreport.Database.Tables) { TableLogOnInfo boTableLogOnInfo = boTable.LogOnInfo; boTableLogOnInfo.ConnectionInfo = boConnectionInfo; boTable.ApplyLogOnInfo(boTableLogOnInfo); boTable.Location = "newtablelocation"; }}

HT5624 My husband, myself & our 2 daughters all use the same Apple ID but w different user names. Is this a potential problem?

4 members of my family use the same Apple ID but different user names
Is this a potential problem w privacy etc?

Since the Apple ID does not have a username, I suppose you mean different e-mail-adresses?
In theory, this is not a problem, but of course it can be difficult if you want to keep things separated. For example, logging in with you Apple ID will automatically set up iCloud and sync your calendar, reminder, notes, mails etc. You can disable this syncing on your daughter's devices, but then they won't be able to use functionalities unless they create their own accounts (for example set up another email account). I think (but I am not 100% on this) they will be able to create reminders/notes etc. locally on the iphone.
If you mean app-wise or legal-wise: No, this is not an issue. You can use your Apple ID and the apps you bought on up to five different devices. Still, for simplicities sake and to give everyone their share of privacy I personally would suggest different IDs for everyone.

Importing In different DBProvider name : Urgent

Similar Messages

Maybe you are looking for