Importing VHS tapes to iMac on the cheap?

Is there a way to import a VCR tape to the iMac on the cheap? I guess some type of cable convert from a composite out on the VCR to an input on the iMac? These are just tapes of tapes and such and do not need to the quality output of either the Canopus ADVC 110 or Elgato EyeTV 250. I copied a VCR tape to a mini-DV and was able to output into iMovie with no problem. But that seems a bit tedious!

I have this device. I don't know if $89 will be considered "on the cheap."
http://daystar-store.com/xlr8xtraview-theeasytousevideo-insolutionforthemac.aspx
It takes RCA composite or S-Video input and sends it to the Mac over USB 2.0 (must be a direct connection). It comes with software to convert that input to MPEG-4 or other compression format. It also has audio input (a pair of red/white RCA connectors); you can use that for audio or the iMac's built-in audio input.
I mostly use it to watch the output of my old TiVo box on my iMac's screen.

Similar Messages

Importing VHS tape into iMovie.

I am importing VHS tapes into either imovie 09 or 06. When I play back in the program, it has good quality. But when I save it, no matter what format: mp4, .avi, .mov, etc. The quality is very poor when played back on DVD player.
Any suggestions as to what I am doing wrong?

I am importing VHS tapes into either imovie 09 or 06.
Use iMovie 06 with iDVD 09.
iMovie 09 and 11 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
Your workflow is editing DV clips and making DVDs, so iMovie 06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie 09, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 09 is a "lossless" combination.

HT3775 This info is not helping. I am using VC500MAC digital video conversion system to record old VHS tapes to computer. The file is .mov, but quicktime is not playing it back. Help, please.

This info is not helping. I am using VC500MAC digital video conversion system to record old VHS tapes to computer. The file is .mov, but quicktime is not playing it back. Help, please.

Sorry for this question. Can you use this device with Vlc or QuickTime? Does skype support it? Is this device supported only by its own software?
I need a device that can work with my own software. My software can work only with a QuickTime supported device.
Thanks if you will reply to me.

Problem importing VHS on intel iMac

I import VHS into iMovie using a Canopus ADV C100 converter via Firewire. I used to import onto an iMac G5 no problem. Now I switched to a new iMac Intel. When I now preview the VHS tape there is no audio, although the audio is captured when I import.
But I really need the audio to work during preview.
Could this be related to the built-in camera? I noticed when
the converter is on and I open Photo Booth all I see is a green screen. When the converter is off, the camera works fine. Could the camera and converter be interfering with each other?
Thanks for any help!

Another option would be to check your preferences in iMovie and uncheck "filter audio from camera".
this may be working overtime and removing all audio.

Importing VHS tape from VCR into iMovie

I'm trying to find out if it is possible to connect a VCR to my iMac and import the content from a VHS tape into iMovie in a similar way to connecting a camcorder to the iMac.
Thanks in advance.

Welcome to Apple discussions!!
I have done lots of this.
To get your VHS video into iMovie, look at the Grassvally ADVC300. Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 09/11 (I have used it a few times with iMovie 09 also).
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source and convert it to FireWire (iMovie will treat it like a camera).
http://www.grassvalley.com/products/advc300
I would use iMovie 06 with iDVD 09/11, why?
iMovie 09/11 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
If your primary workflow is editing DV clips and making DVDs, iMovie '06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie 09/11, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 09 is a "lossless" combination.

Import VHS Tapes to DVD and iMovie

I have many old VHS tapes I want to finally digitize so I don't lose them. Most are old football games, generally between 1-2 hours per tape. I am working off of a new iMac - 27inch 3.1gHz 1TB hard drive.
I want to do 2 things:
1 - Backup each tape to a high quality DVD for backup purposes - to be played in a DVD player
2 - Store lower quality versions on my iMac hard drive to be viewed/ edited/ possibly uploaded to YouTube or other web based video sites
I have iMovie, and would like the ability to edit if possible - nothing major, ading scores, dates, etc...and possibly manipulating video (cropping of scenes, etc...) but not much.
I have researched and found a few different options. Most threads I have read seem to indicate the need for one of the following:
Canopus ADVC300
Canopus ADVC55
Elgato Eye TV Hybrid
I am willing to spend $100 - $200, but this I'd rather not go crazy. At a certain point it would just be easier to sed them away to be professionally archived to DVD.
Any advice?

I have many old VHS tapes I want to finally digitize so I don't lose them.
I have done lots of that.
To get your VHS video into iMovie, use the Grassvalley ADVC300. With the ADVC300 Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 09/11 (I have used it a few times with iMovie 11).
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source (VCR, Tivo, Satellite Receiver) and convert it to FireWire (iMovie will treat it like a camera).
http://www.grassvalley.com/products/advc300
I would use iMovie 06 with iDVD 09/11, why?
iMovie 09/11 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
If your primary workflow is editing DV clips and making DVDs, iMovie '06 is better suited.
Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie 09/11, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 11 is a "lossless" combination.

Audio Drift when importing VHS Tapes-Do I need a Canopus ADVC 300

Embarking on the daunting task of importing/editting >100 2hr VHS tapes, and want to get the best results for my efforts.
I pop a tape into a VCR connected via S-Video (video) and RCA (audio) cables to a Sony DVMC-DA1 AD converter, and from there to my Mac Pro via Firewire. Use FCE "Capture Now" using NTSC DV Converter setup. Start capture, let it run unattended, and return at my leisure to do some rough editting.
Problem is the audio on the imported clip gradually loses sync, by about 2 seconds by the end of the clip. The sync problem is present on the clip when played with Quicktime as well.
Questions:
1. Is there a reasonable way to correct this in FCE?
2. Since my Sony converter is nearing 10 years old, will use of a more recent AD converter such as the Canopus ADVC 300 result in a perfectly synced import?
3. If so, can you comment on the Canopus's purported video noise reduction and image stabilization capabilities? Is it noticable/worthwhile?
Thanks for your time.

Hello,
The problem is the audio is not 'locked' to the video, and your old Sony DVMC-DA1 does not appear to support locked audio.
The only way you might deal with this in FCE itself would be to capture shorter clips (say, under 15 minutes each) which would minimize the degree to which the audio drifts out of sync in each clip. (The longer the clip, the greater the drift.)
Given the large amount of video you wish to digitize (some 200 hours), it will be far preferable to use a Canopus ADVC-100, 110 or higher model - +they all support DV locked audio+ - so the video & audio are sync'd without the need for manual intervention or capturing short clips.
I have used the Canopus 100 & 110 extensively and have been very happy with the results. Sometimes, depending on the VHS tape, there is some slight banding at the very bottom of the image but 1) this is +usually not visible+ in the finished movie because it is outside the 'image safe area' and 2) if necessary can be compensated via about a 2%-4% enlargement of the image in FCE (which is not enough to soften the image).
I have not used the Canopus 300 because I never felt the need, as I am happy with my results from the 100 & 110. Users of the 300 have been pretty positive about its built-in TBC and image cleaning capabilities.

Importing VHS tapes w/ADVC-300 help

Please help, I'm converting a large number of VHS tapes to DVD using a ADVC-300 Analog to Digital Converter and a Sony VCR. Everything imports fine but everytime the signal hits a break in the tape (the old VHS snowstorm) iMovie stops importing. Since most of these tapes were made by my mother in law, nearly every couple minutes there is a break in the tape and I have to constantly hit import to begin again after a break.
While I enjoy being glued to 45 VHS tapes of my wive's childhood, I rather set it and forget it! It might be a function of the ADVC-300 but I was hoping there is a way to configure iMovie to import till disk full or stopped regardless of the signal coming in.
Thanks!

Hi Tom
I have an ADVC 100. I've imported VHS video through a panisonic VCR snow and all with no problems into imovie 5. The problem could be with the VCR or the ADVC 300.
A possible work around could be to set the VCR to play the video through to a mini DV tape camcorder. It should record one continueous video on a single time code. Then you should be able to import directly to iMovie -- snow and all!
It's an extra step, but you don't have to baby sit the VCR.
Good luck
Carl

Importing VHS Tapes?

Hello,
I have a Honestech VHS to DVD converter package. It comes with a converter box that I can plug in audio and video cables, along with s-video. I don't prefer the software that the package comes with because it is Windows software. You plug the box into your computer with USB. Is it possible to let iMovie or some other Mac application import the my VHS tapes from this box? iMovie does not detect the box when I click "import from camera", so I am willing to try a different Mac application that would recognize it.
Thanks for your help.

If you want to import video on the Mac, there are several options.
1) There is the EyeTV Hybrid. Like the Honetech, it accepts the RCA cables and s-video. It also accepts high definition TV signals from an antenna or cable box. It records in MPEG2 format, so additional conversion is required before editing in iMovie. I do this with MPEG Streamclip (free) and the Apple Quicktime MPEG2 Playback Component ($20). EyeTV does not make DVDs but it can output files that can be burned with Toast or iDVD.
2) Canopus makes a line of converters that will convert analog input from RCA cable or S video into DV which can be imported directly into imovie.
3) Certain miniDV camcorders and Digital 8 camcorders will allow passthrough analog conversion. You plug in the RCA cable or the video cable into the camcorder and it converts to DV and outputs via Firewire. This can be imported directly into imovie. I recently bought a Digital 8 camcorder on eBay for a price much lower than the Canopus for the purpose of importing some old 8mm camcorder tapes.

Importing VHS tapes into iMovie

I have several VHS movies that I am importing into iMovie from a VCR to a Pinnacle Movie Box DV which is hooked up to my computer. The box is a few years old and I am having a problem. I cant simply start the import and walk away because without fail every so often the video screen in iMovie goes blue and while the tape is still playing, nothing is being imported. I have to stop the tape rewind it to where it stopped being imported, and start again. This is VERY frustrating!!! Is it my box, or iMovie???

Hi
My Guess. There might be drop outs on Your VHS tapes and Your A/D-box stops
importing then.
I payed up for a more costly way. Canopus ADVC-300. But this costs.
Alt. I used was to connect my miniDV tape Camera and download 1 hour at a time
to tape and use this. The tape has been pre-recorded with eg a wall so that I get
an unbroken time-code on it.
one hour passes are better than constantly supervicing.
iMovie is more accepting to drop-outs than FinalCut Express or pro (my experience)
Setting iMovie to import without breaking up in individual clips works better
for me. (Material from VHS/VCRs doesn't carry the information that can divide
into separat clips anyhow)
Yours Bengt W

Importing VHS Tape

I'm importing a VHS tape using a DataVideo DAC-200 dv converter. while importing, there is no audio coming from the screen showing the tape's progress during the import. I am not sure if this is because the tape has no audio (which I highly doubt) or if some settings are messed up, or if it just won't play the audio during the import. It is importing right now

Let me assume that these movies are important to you and that you want the best quality possible.
The DataVideo DAC-200 dv is a good video converter (now discontinued).
I tried many converters but found the Canopus ADVC300 to be the best.
With the Canopus ADVC300. Audio and Video go in, FireWire comes out (just like the DAC-200). It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 09 (I have used it a few times with iMovie 09). The software that comes with the Canopus ADVC300 has some incredible filters that can improve the picture as well as the sound. I sometimes use it to reduce the background "hiss" found in some tapes. Well worth the price.
http://www.canopus.com/products/ADVC300/index.php
iMovie 09 uses single-field processing. This means every other horizontal line of the video is thrown out, which reduces the sharpness of the footage.
Your primary workflow is editing DV clips and making DVDs, iMovie '06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels, same aspect ratio, and original quality. If you share your movie from iMovie 09, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 will give you audio when importing.
iMovie 06 and iDVD 09 is a "lossless" combination.

Will server search and import existing profiles from Imacs on the network

We are in the process of installing new imacs into an existing windows 2003 SB network. Today the SMB server is the DNS server however I have bought a mac server in order to take the SMB out of the loop and change it over to simply being a file server for reference via VM's using Windows 7 of the old Windows PC's that the Imacs are replacing.
We currently have 4 imacs in the network already and have their own profiles as per the standard start up. The question is will the mac server when configured as the replacement DNS server find and import the existing Imac profiles or will they need to be recreated via the server

The executable will be run on the client computer, if you acces them by a shared drive or something.
But download time can be noticable, but it shouldn't cost performance, be aware that all users will share the same app.ini file.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Import VHS Tape from VCR

Hi all,
I have some old family tapes on vhs to import imto the mac.
in the past I used a canopus and imported to quicktime 7 with h.264 and all was good - but now it seems as though QT 7 is broken and won't import more than a few minutes
https://www.google.com/search?client=safari&rls=en&q=quicktime+7+maximum+duratio n&ie=UTF-8&oe=UTF-8
Basically I want to just do some basic clean up after then save them as h.264 for archiving
So what is the best way to import these videos now?
IMovie or final cut pro or Adobe premier or another app (I'm not very good at final cut or adobe)?

Use the Canopus to import into iMovie.

Importing VHS tape to imovie

Hi there im geting a new macbookpro but i will need to transfer my video wedding video which is on vhs, so I can import it in to imovie or quicktime. Please please if you have any idea on what i can use to do it please help.
PowerBook G4 1.5 15, 80Gb 5400rp128mb grahics Mac OS X (10.4.3)

As you will have read in Sue's link, you need to connect your VCR player to an analogue to digital converter (like, for example, a Canopus ADVC110), and the converter to your Mac by firewire in order to import the digital signal into iMovie.

HELP !!! importing VHS to my IMAC

Hi everyone, Im looking for the simplest solution to import my Dads home movies to my mac. Do I need to invest in something like final cut , or could Imovie cope? Also can anyone put me in the right direction to find a scart to usb lead in order to take care of the hardware side? I dont need any fancy editing features, really just want to protect 40 odd years of family memories without trusting the job to a stranger!!
Thanks in advance!!!!!

I'm doing just this. After a lot of false starts, I bought the canopus 110 from the apple store - cost £200 but was worth it. I can copy home movies and copy protected movies from VHS straight in to imovie with the press of a button. (to break copy protection, just hold down the select button until the light flashes). Since I own my videos, and don't play to keep a VHS recorder any longer, I don't feel like a criminal. Now I can even edit the movies on my mac, clean the up if I'd like and put the on to a DVD. I highly recommend this route - You'll also likely need a good quality scart to composite cable as one is not included.

Importing VHS tapes to iMac on the cheap?

Similar Messages

Maybe you are looking for