Impossible getting abs tree (SOLVED)

I am new on arch. This is the first time i use ABS. I have installed cvsup. When i type abs, it seems to be ok, but when it arrives at base/coreutils/coreutils-i18n.patch, it stops. But i am not prompted then. I think this is not a big file and i do not know how to do.
[root@nabucodonosor /]# abs
Connected to cvs.archlinux.org
Updating collection arch/cvs
Checkout PKGBUILD.proto
Checkout base/acl/PKGBUILD
Checkout base/attr/PKGBUILD
Checkout base/autoconf/PKGBUILD
Checkout base/automake/PKGBUILD
Checkout base/bash/PKGBUILD
Checkout base/bash/bash-noinfo.patch
Checkout base/bash/profile
Checkout base/bin86/PKGBUILD
Checkout base/binutils/PKGBUILD
Checkout base/bison/PKGBUILD
Checkout base/bzip2/PKGBUILD
Checkout base/coreutils/PKGBUILD
Checkout base/coreutils/coreutils-i18n.patch
Thanks to all
Last edited by kyaneos (2007-03-08 18:50:32)

[root@nabucodonosor ~]# cp /home/kyaneos/coreutils-i18n.patch /mnt/unstable/var/abs/base/coreutils/
[root@nabucodonosor ~]#
[root@nabucodonosor /]# ls /var/abs/base/coreutils/
coreutils-i18n.patch
[root@nabucodonosor /]#
[root@nabucodonosor /]# abs
Connected to cvs.archlinux.org
Updating collection arch/cvs
Checkout base/coreutils/PKGBUILD
Checkout base/coreutils/coreutils-i18n.patch
the same... Thank you very much

Similar Messages

Pacman kernel version different from abs tree

I've started using Arch Linux since last week, switching from Ubuntu, and I must say, I'm impressed. I've been using Gentoo on another system for a while, and I wanted the power of Gentoo, without the compiling, which actually is what Arch is providing.
I've installed a i686 system, but I have 8Gb of memory so I've compiled my own kernel with HIGHMEM64G=yes.
When I updated my system today, I got a new kernel package from pacman: 3.1.3-1.
But when I rebuild my kernel using abs, I get 3.1.2-1.
Shouldn't these versions be the same? I've tried different mirrors to sync my abs tree, to no effect. Am I missing something?

Ok, thanks, then I know what's going on.
How can I use a 64bit kernel with a i686 install? That might be easier than recompiling my kernel each time. What about nvidia module and virtual box modules? I had to recompile these myself as well after I compiled my own kernel.
Sure, if I had to reinstall, I'd go 64bit all the way; though I now have my system full up and running and configured so I'm not really looking forward reinstalling right now. I chose i686 not for a particular reason, I just assumed there would be a pae enabled kernel, but unfortunately there isn't one in the official repositories.

How to get a tree item when my mouse moves

I want to get the tree item which my cursor points to when my
cursor moves over a tree.
I can get a row index in itemRollOver event, but it seems
useless.
And I don't know how to use getObjectsUnderPoint method.
Is there anyone who can help me?

Take a look this example:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="srv.send()">
<mx:Script>
<![CDATA[
[Bindable]
public var selectedNode:Object;
[Bindable]
public var XLC:XML;
public function initList(event:Event) : void
XLC = event.target.lastResult;
public function treeChanged(event:Event) : void
selectedNode=Tree(event.target).selectedItem;
]]>
</mx:Script>
<mx:HTTPService id="srv" url="../assets/tree.xml"
resultFormat="e4x"
result="initList(event)"/>
<mx:HDividedBox width="100%" height="100%">
<mx:Tree id="myTree" width="50%" height="100%"
labelField="@label"
showRoot="false" dataProvider="{XLC}"
change="treeChanged(event)"/>
<mx:TextArea height="100%" width="50%"
text="Selected Item: {selectedNode.@label}"/>
</mx:HDividedBox>
</mx:Application>
"hybak" <[email protected]> wrote in message
news:fd5gao$229$[email protected]..
>I want to get the tree item which my cursor points to
when my cursor moves
>over
> a tree.
> I can get a row index in itemRollOver event, but it
seems useless.
> And I don't know how to use getObjectsUnderPoint method.
> Is there anyone who can help me?
>

How to get a Tree Node Value when a Tree is Expanded

My reqiurement is when i Expand a Tree i need the Expanded tree Node Value. For Example Consider Parent as a Root Node of a Tree, and Consider its two Children Child1 and Child2.
When + Parent Expanded
I will Get the Output as --Parent
- Child1
- Child2
so As when i expand the Tree i must Get the String Value Parent.

duplicate
How to get a Tree Node Value when a Tree is Expanded

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

dougiedc wrote:
It boggles the mind. The Verizon store on L Street downtown Washington, D.C. cannot access my Verizon account. They can only sell cellphones then it's up to me to contact Verizon on my own to get the hook up. I even asked "Are you Verizon employes? Is this a vendor store or is it really a Verizon owned and operated store?" The answer "Yes, we are Verizon employes, yes this is a Verizon owned and operated store" ...
Yes, it indeed boggles the mind. I'm of course referring to the fact that your post concerns Verizon Wireless products and services. This forum is dedicated exclusively to Verizon Communications services. As you probably know, Verizon Wireless and Verizon Communications operate as separate companies.
If you need help for a Verizon wireless product or service, it's best to direct questions to the Verizon Wireless forums. You can reach them by clicking on "Wireless" (either here or at the top of the page).
Good luck and I sincerely hope you get your issue resolved.

How to get a tree-oriented view of a pdf document's sections in Acrobat 8 Professional?

Hi, I have a PDF that has a document outline (with table of contents etc.). This may be a stupid question, but in earlier versions of Acrobat Reader -- I used to be able to get a navigation panel that showed the sections in a tree-form that made it easy to jump to a given section. I now have the Acrobat 8 pro.. and when I read PDF's with it, I do NOT get this tree-oriented view.. but just a thumbnail or page oriented view. How can I get the other view?
Thanks,
-Sundar

Well.. the contents page seems ok, and when I click on the lines in the contents page, Adobe takes me to the right spot. Others (w/ earlier versions of Acrobat) also are able to see the outine. I have to conclude that perhaps pro8 is just broken. (I guess I have to talk to someone to figure out how I can get my reader back.. because right now even the reader launches Acrobat Pro..). Sigh.

To get the tree structure using html

how to get tree structure using html?is there any commands in html to get the tree structure

This is a Java forum, not HTML.

How to relocate the abs-tree

Hi,
I reinstalled my laptop, I wanted to save the abstree and I found a line in
/etc/makepkg.conf:
# the top-level directory of all your PKGBUILDs
export ABSROOT="/usr/abs/"
Cewl, this make it easier for me to keep my own costumized abs-repository
at a seperate partition,(well, i could mount this partition to /usr/abs, but I
wanted to try it with "ABSROOT")
Well I tried to relocate my abs-tree there - but it failed. Running "abs" as root
downloaded all the files to /usr/abs.
Now, before I try to crash my system, if I put the quoted line to /etc/profile
would it work? If ABSROOT is important for "makepkg" so it should be
important for "abs", too, and so makepkg.conf should be parsed everytime
"abs" is running, or am I wrong here?
bye neri

No, you make a good point. the 'abs' script doesn't pay any attention to makepkg.conf, it is hard-coded to use /usr/abs instead (though I'll change this in the future).
For now, you'll have to edit /usr/bin/abs and change the top line, ABS_ROOT, to point to your new abs location.

Help! can i get a tree view component used in jsp ,urgent!!

hello all
can i get a tree view component can be used in jsp ,it gets children data from database only when user expand one node, and it must be able to add nodes or removes node by user,so i can do some post handler in my database.
regards!

Where did you get this tree view component?

Simple shell script utility to copy abs tree for build

Hi,
I'm learning shell script and decided to make a simple script to copy the folder i want from /var/abs to
a new folder so i can build the package. here it is: (remember, i'm new to shell scripting, if you know a better way to do it, you can modify my script
and post here a better solution, so, i (and others) can learn with my errors)
#!/bin/bash
#Looks for the abs tree of the software you want
#and copy it to your build path
ABSTREE=/var/abs
echo -n "What software do you want? "
read absname
result=$(find $ABSTREE -name $absname)
for i in $result; do
echo -n "$i, is this what you want? [y/n] "
read opt
if [ $opt = "y" ]; then
echo -n "Copy to... "
read buildpath
relative=${i#$ABSTREE}
absolute=$buildpath${relative%$absname}
mkdir -p $absolute
cp -r $i $absolute
echo "$i successfully copied to $absolute"
exit 0
fi
done
exit 1

spoonman wrote: mkdir -p $absolute
cp -r $i $absolute
echo "$i successfully copied to $absolute"
You are assuming `mkdir` and `cp` were successful. You should test them to make sure, and exit with failure if not:
mkdir -p $absolute || exit 1
cp -r $i $absolute || exit 1
echo "$i successfully copied to $absolute"
You could also include your own error message, but mkdir and cp would throw their own if something fails...
mkdir -p $absolute || { echo "mkdir failed"; exit 1; }
cp -r $i $absolute || { echo "cp failed"; exit 1; }
echo "$i successfully copied to $absolute"
Another way is to use `set -e` which will exit the script on any failure without explicit testing:
set -e
mkdir -p $absolute
cp -r $i $absolute
set +e
echo "$i successfully copied to $absolute"

Should abs tree be in sync with repos?

hello,
today while playing with bauerbill i noticed that pkgbuilds in the abs tree have a lower pkgver and/or pkgrel than the packages from my selected pacman mirror. i don't use testing repository.
now my question is:
should the situation be the opposite, in another words, should abs contain newer pkgbuilds than the packages in repositories (if the repositories are not in sync), or is this normal behaviour?
thank you for your answers

wonder wrote:abs is using a rsync snapshot from svn and is generated twice of day if i remember well.
It is generated only once a day.

Tracking changes of the given packages in ABS tree periodically.

well, i need some kind of automation to track changes of the given packages in ABS tree, e.g. daily, and reporting to me if they happens.
it's natural to write a script that does exactly that, but maybe someone has a working solution yet, so i decided to ask here first.
so, any ready solution? thanks in advance.

I don't know what exactly are you trying to do, but you can e.g. visit the online package database and check the log: https://projects.archlinux.org/svntogit … ckages/0ad
If ABS got updated, it means there's a new package is available, so you can use pacman to track it. If you're using ABS to customize some package, add it to IgnorePkg in pacman.conf.

A very old package version is still in the ABS tree

I wanted to add some compile-time options to the qemu package so I synced my local ABS tree and made a copy of the relevant PKGBUILD and its associated files:
$ sudo abs
$ cp -r /var/abs/extra/qemu/ ~/abs/local/
However, I noticed that this particular qemu PKGBUILD is at version 1.4.2-2 whereas the qemu version available from the extra repo is currently at 1.5.1-2.
To be sure I wasn't mistaken, I synced my local abs tree twice and had someone else confirm that they too are seeing the qemu 1.4.2-2 PKGBUILD after updating his abs tree.
Is this to be expected? How often is the central ABS tree updated?

WonderWoofy wrote:To add to the actual topic of the thread. If you really need the updated pkgbuild (and any accompanying files), you can always use the packages web interface and follow the link to the git repo that holds all those stuffs.
You need to be careful if there are versions of this package in testing and non-testing repos, as the web interface will point to the testing ones e.g. https://www.archlinux.org/packages/extra/i686/amule/ If you click 'Source Files' link in the top right and then view the PKGBUILD https://projects.archlinux.org/svntogit … ages/amule you will see it is for version 10803-3, even though we wanted version 10803-2 from [extra].
For amule, there shouldn't be a difference, but for some other packages, there might be: https://bbs.archlinux.org/viewtopic.php?id=164759

[SOLVED]I need help updating the ABS tree by a form other than rsync

hi arch family presented the following problem, I have internet access through a firewall, my problem is I can not update the tree ABS rsync to update there any alternative other than because they appreciate assistance rsync
thanks
Last edited by jccl1706 (2010-03-12 15:50:27)

ok friend thanks Snowman solved my problem thanks to this great community that we all are here greetings from Cuba also used arch
thanks

[SOLVED] Trying to get ADF Tree to show Distinct results only

Hello,
I am trying to make an ADF Tree in JDeveloper 10.1.3.3.0.4157.
I have it show two levels, each level is from one column of my table.
For example, if I had columns
Sec_1
1
1
2
2
and
Sec_2
4
5
6
7
I want it to show a tree that has
1
---4
---5
2
---6
---7
But instead it shows as
1
---4
---5
1
---4
---5
2
---6
---7
2
---6
---7
Is there any way I can fix this? I've tried changing my view objects to specify SELECT DISTINCT but that doesn't work because I need to include a primary key in each view object and the primary keys are of course already distinct.
Sorry for the poor diagrams but I couldn't think of a better way to explain it.
Thanks
Message was edited by:
TheNelson

I guess I sould clarify a bit:
I have a dropdown menu elsewhere on the form that chooses something from a separate column (main_column). When that is selected, the tree appears and shows the columns I mentioned. Sorry, I didn't think this other one might be relevant.
So I have
main_column
a
a
a
a
b
b
b
b
Sec_1
1
1
2
2
3
3
4
4
Sec_2
3
4
5
6
3
4
5
6
The Master VO is for the main_view, and it then had a detail Sec_1 and in that is a detail Sec_2.
I've made view links between all of them.
The problem happens like I said in my above post is that the main_column (and a few others) are primary keys and need to be included. Especially main_column needs to be included in my view object because it is used in the view link with the dropdown box.
Does that make sense? Sorry for not describing this well earlier, I was trying to simplify it.
Basically the problem is:
A view object needs to have a primary key
A primary key has every value distinct
using SELECT DISTINCT therefore selects every row.
Message was edited by:
TheNelson

Impossible getting abs tree (SOLVED)

Similar Messages

Maybe you are looking for