Imprimante Zebra

Bonjour.
Dans mon application, je dois imprimer (via une imprimante Zebra TLP 2844 et ou 2824 ) un numéro de série.
En utilisant l'application de zebra, j'ai réussi via des commandes EPL à imprimer mon numéro de série.
Mais maintenant je ne sais pas comment envoyer dans mon application ces différentes lignes de commandes.
Pour information, je suis connecté via le port USB sur cette imprimante, je ne peux pas utiliser le port COM ou parallèle car je n'en ai pas sur mon PC.
Merci pour votre aide.
Résolu !
Accéder à la solution.

Bonjour.
J'utilise CVi pour cette application.
J'ai résolu mon problème grace a cette note trouvé chez Sebra :
https://support.zebra.com/cpws/docs/usb/dos2usb.pdf
Pour imprimer je lance donc une commande "dos" depuis mon application et cela fonctionne.

Similar Messages

Driver imprimen

Bonjour ,
Je dois écrire un pilote qui permet de lire à partir d'un code à barre et piloter deux types d'imprimantes: zebra(EPL,ZPL) et Cab (Basic ABC). Je suis débutante . Je veux savoir d'où je dois commencer le .c ou .h. Je veux des documents qui cible la création des drivers.
Merci d'avance.
Cordialement.

Bonjour FibrilA,
Bienvenue sur le forum de discussions de National Instruments
Voici un document qui pourrait peut-être vous aider à créer votre driver en utilisant l'assistant d'entrées/sorties d'instruments.
Vous pouvez également jeter un coup d'oeil à ce document PDF qui contient pas mal d'informations sur la création de drivers en utilisant LabWINDOWS/CVI
En éspérant vous avoir aidé,
Cordialement,
Vincent.O
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

Imprime en tres páginas, cabeza, cuerpo y final. Si el cuerpo es más grande que 1 página, lo que sobra no se imprime, salvo que reduzca a tamaños demasiado pequeños. ¿Porque pasa esto? ¿Como lo puedo solucionar?

Al imprimir una pagina web (de blogs, periódicos, por ejemplo), muchas veces se generan tres páginas, como si fueran una cabecera con la cabecera de la página, el cuerpo de la página web y un pie. Si el articulo a imprimir es largo, el cuerpo seguira teniendo una página, que quepa o no, por lo que el artículo está cortado y lo que sobra no se puede imprimir, salvo cambiando el % de zoom y hacerlo demasiado pequeño.
No es un tema de frames ya que de ser así al hacer clic derecho podría abrir el frame en otra ventana, pero no lo propone por lo que supongo que la página no los utiliza. Pero el comportamiento parece muy similar: dividir la página en tres partes: en la primera la cabecera, p.e. del blog (pág.1 de impresión); luego el artículo en sí - sólo la parte que cabe en una página (pág.2); y el pie, p.e. los comentarios en un blog (pág.3).
La versión de firefox es: Mozilla/5.0 (Windows; U; Windows NT 5.1; es-ES; rv:1.9.2.22) Gecko/20110902 Firefox/3.6.22
(se actualiza sola).
Pongo un enlace con el que me pasa:
http://www.lavanguardia.com/lacontra/20110909/54213913374/lo-que-pensamos-varia-nuestra-biologia.html
He tenido bastante más casos, algunos de los cuales he impreso al final desde explorer, sin problema, pero es un incordio (además que el explorer no me funciona bien y paso de reinstalarlo porque casi no lo utilizo).

Yes in an STL file the subs have a comma after each In and Out Timecode (as a separator) and also they don't normally have line spaces between each entry. If you want the subs to be on two lines and "force" what goes on to the second line (rather than SP deciding for you) then where you want the return to be you need to add "bar" symbol (the one above the backslash on a Mac keyboard)
Try it on a couple of lines of your subtitles to see if it works before committing. I usually create my subs as STL files but it should work
Steve

FI-AA Imprimir Totais em relatorios Sandart.

Olá
Boa tarde.
Eu estou com um problema na impressão dos totais de relatorios.
Bom primeiro eu vou na transação S_ALR_87011964
Tirei o utilizar ALV grid control e gero o relatorio analiticamente.
Quando eu faço a impressão os sub-totais (linhas em amarelo) dinamicos não saem na impressão.
Agora por exemplo o relatório de aquisição de imobilizado S_ALR_87012050 da certo pois embaixo desses sub-totais dinamicos aparece outra linha amarela que sai na impressão, ou seja esses sub-totais dinamicos não saem na impressão, procurei nas configurações do relatórios e nada, alguém já passou por isso? Tem como mudar para ficar igual o relatório de aquisição ou ainda tem alguma configuração que pode ser feita?
Não encontrei nada dentro da OAVI também.
O cliente precisa imprimir direto do SAP, ou sejá não é possivel exportar para o excel ou para word por exemplo.

Imprimir Número de série do item na Nota Fiscal - usando o PLD

Boa Tarde.
Estou desenvolvendo um layout de Nota fiscal para itens que possuem garantia, então é necessário que seja impresso, juntamente com a descrição do Item o número de série. Já tentei imprimir o número colocando um field com OSRI:IntrSerial, mas ao invés dele trazer apenas os números de série relacionados na NF, ele tráz todos os números de séries cadastrados no estoque para o item.
Alguém já desenvolveu uma NF com Número de Série em PLD? Poderia por favor me ajudar?
Abraços,
Bruno Cassaro
Edited by: Bruno Cassaro on May 5, 2009 7:16 PM

Oi Bruno
A versão 2007B não tem a tabela do campo de número de séries exposto para o PLD.
Paulo Calado
SAP Business One Forums Team
Edited by: Paulo Calado on Sep 11, 2009 4:35 PM

Unable to get the print from the zebra printer

hi,
i have copied a SAP standard form into a Zform. i have made changes to the Zform depending on my requirement(i.e. i have added more fields and also barcodes). I did not make any changes to the driver program since i copied the standard layout. After making changes to the Zform when i check the print preview everything seems to be fine. But when i try to print the Zform from a zebra printer it does not get printed. But it says printing is completed and also a spool request is created but the print never comes

Hi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna

Communication problem with Zebra printer

Post Author: rafu
CA Forum: .NET
Hi,I'm trying to write bidirectional communication with Zebra printer - e.g. send data to print and receive data read from tags. To send data it's possible to use WritePrinter methods described in internet, however I don't know how to get it?? In producer's manuals there is only example to printer connected by LPT1, my uses usb.Does anyone have any ideas??? Help please!rafu

I would look at XP's port configuration for the printer and then try and use the same protocol on the Mac. If XP is showing it as RAW Port 9100, then that is shown as HP jet Direct - Socket on the Mac. The only issue then is whether the OS X driver is available in the Lexmark list. Sometimes the provided OS X driver is only for direct USB connections, so you have to look at using an alternate driver, such as those offered by Gutenprint.

Not printing...zebra printer

Hi All
I am using zebra printer TLP 2844, all the fonts are feeded in the printer.
I am printing a simple text.. but its not printing anything.
REPORT ZTEST2 .
data: x-prin(4) value 'LOCL'.
data:
t1(80) value 'A100,100,0,d,1,1,N,"Material Number"'.
do 1 times.
new-page print on
      destination x-prin
      copies '1'
      immediately 'X'
      keep in spool 'X'
      no dialog.
write: / 'O'.
write: / 'Q1217,1'.
write: / 'q811'.
write: / 'S2'.
write: / 'D6'.
write: / 'ZB'.
write: / 'JF'.
write: / 'N'.
write: / t1.
enddo.
any idea what can be the reason
cheers
AJ

Hi Pavan
As the SAP vesion is 4.6c...and they have no support package for printing using samrtforms.
but other reports, which prints the labels in the warehouse are printing the barcode labels....
and I am using the same printer........so definetly it should print.
but I dont know what mistake I am doing........
AJ

A question on different zebra printer dpi printing - sapscript

Hello,
We have an existing sapsript (with ZPL code) to print label via a zebra printer (300dpi). There is a requirement to print
the same label on new device zebra QL 320 plus(wireless printer, 203 dpi).
Please advise how to make use of the existing sapscript to print to the wireless device without creating another sapscript(with different dpi).
existing 300dpi ZPL code in sapscript:
^FX
~DGR:ROHS.GRF,2222,22,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
^XA
^PRC
^LH0,0^FS
^LL610
^MD0
^MMT
^MNY
^LH0,0^FS
^FO32,20^A0N,45,45^CI13^FR^FDPART #: 60000001^FS
^BY2,3.0^FO36,66^BCN,56,N,Y,N^FR^FD>:60000002^FS20000001
^FO709,74^A0N,45,45^CI13^FR^FDMSD: 60000003^FS20000002
^FO32,137^A0N,36,36^CI13^FR^FD60000004^FS
^FO32,183^A0N,36,36^CI13^FR^FDMPN: 60000005^FS30000001
^BY2,3.0^FO36,222^BCN,56,N,N,N,A^FR^FD60000006^FS
^FO32,293^A0N,36,36^CI13^FR^FDBATCH NO: 60000007^FS
^BY2,3.0^FO36,330^BCN,56,N,Y,N^FR^FD>:60000008^FS3000000230000003
^FO460,293^A0N,36,36^CI13^FR^FDD/CODE: 60000009^FS
^BY2,3.0^FO461,330^BCN,56,N,Y,N^FR^FD>:60000010^FS30000004
^BY42,42^FO750,300^BXN,5,200,0,0,1^FH\^FD60000011^FS30000005
^FO200,517^A0N,36,36^CI13^FR^FDCOO: 60000012 ^FS
^BY2,3.0^FO36,500^BCN,56,N,Y,N^FR^FD>:60000013^FS
^FO500,460^A0N,36,36^CI13^FR^FDQTY: 60000014^FS
^BY2,3.0^FO500,500^BCN,56,N,Y,N^FR^FD>:60000015^FS
^FO32,399^A0N,36,36^CI13^FR^FDSAP Doc: 60000016^FS20000003
^FO500,399^A0N,36,36^CI13^FR^FDV/CODE: 60000017^FS20000004
^BY2,3.0^FO36,432^BCN,56,N,Y,N^FR^FD>:60000018^FS
^FO30,566^ABN,25,15^CI0^FR^FDDate RECEIVED: 60000019 ^FS
^FO520,566^ABN,25,15^CI13^FR^FDUser:60000020^FS20000005
^FO713,455^FR^XGRoHs,1,1^FS20000006
^FO0,282^GB931,0,2^FS
^FO0,126^GB931,0,2^FS
^FO0,172^GB931,0,2^FS
^FO0,390^GB931,0,2^FS
^FO0,558^GB931,0,2^FS
^XZ
^FX End of job
^FX END OF FORMAT

Hi,
You should generate a new label file and upload it to a new sapscript form as described in note #179534.
Regards,
Aidan

Label printing on ZEBRA printer TLP2844 with smartform

Hi Gurus,
Requirement:
Print label on Zebra printer with smartform
1. i have created a smartform with desired layout
2. and trying to print on Zebra printer
Questions:
1. smartform is not printing on zebra printer
2. suggest me if there are any ways to print smartform on zebra printer
3. does it requires any native programming language for printing labels on zebra printer
Best Regards,
Krishna

hi Krishna,
This printer does not support ZPL2 so I thnk you cnnot use the device types like LZEB2. It should work to print via windows and a device type like SAPWIN or SWINCF.
Regards,
Aidan

Assistance with Printing to Zebra QL220 using the LabVIEW report VI

I currently am trying to use the LabVIEW report VI to output a formatted set of strings to the above mentioned printer.
The UMPC hardware that runs the developed application is bare bones XP box and doesn't' have MS office installed
I use the LV new report set to a standard report and successfully set orientation to portrait or Landscape, set margins and set report fonts and headers.. However in sending the text strings to this label printer (labels are 45mm X 60mm) I find that that two issues arise.
1. Printing out double labels. The pagination fails and prints a blank label after each print when text is output. However if I disable all headers and body text (i.e blank label print). This pagination works fine.?
2. The formatting of the information on the page reliably, I currently use inserted blank spaces, is there a better way?
I thought, perhaps I should try using the ZLP programming language, but then not sure how to I send it to a USB printer? Has any one had any experience with this and these label printers ?
Thanks
Greg Nicholls

hi all
i am C sharp programer
and i have zebra QL 220 plus
and roll type is 42X20mm
and i have the zebra sdk
and i create mobile application in C# smart device
and i tring to connect to printer from my application by bluetooth
in sdk i got this and use
using System;
using ZSDK_API.Comm;
using System.Text;
using System.Threading;
// This example prints "This is a ZPL test." near the top of the label.
private void SendZplOverBluetooth(String theBtMacAddress) {
try {
// Instantiate a connection for given Bluetooth(R) MAC Address.
ZebraPrinterConnection thePrinterConn = new BluetoothPrinterConnection(theBtMacAddress);
// Open the connection - physical connection is established here.
thePrinterConn.Open();
// Defines the ZPL data to be sent.
String zplData = "^XA^FO20,20^A0N,25,25^FDThis is a ZPL test.^FS^XZ";
// Send the data to the printer as a byte array.
thePrinterConn.Write(Encoding.Default.GetBytes(zplData));
// Make sure the data got to the printer before closing the connection
Thread.Sleep(500);
// Close the connection to release resources.
thePrinterConn.Close();
} catch (Exception e) {
// Handle communications error here.
Console.Write(e.StackTrace);
// This example prints "This is a CPCL test." near the top of the label.
private void SendCpclOverBluetooth(String theBtMacAddress) {
try {
// Instantiate a connection for given Bluetooth(R) MAC Address.
ZebraPrinterConnection thePrinterConn = new BluetoothPrinterConnection(theBtMacAddress);
// Open the connection - physical connection is established here.
thePrinterConn.Open();
// Defines the CPCL data to be sent.
String cpclData = "! 0 200 200 210 1\r\n"
+ "TEXT 4 0 30 40 This is a CPCL test.\r\n"
+ "FORM\r\n"
+ "PRINT\r\n";
// Send the data to the printer as a byte array.
thePrinterConn.Write(Encoding.Default.GetBytes(cpclData));
// Make sure the data got to the printer before closing the connection
Thread.Sleep(500);
// Close the connection to release resources.
thePrinterConn.Close();
} catch (Exception e) {
// Handle communications error here.
Console.Write(e.StackTrace);
and once i use ZPL method it print 17 barcod always with 16 blank Patches (labels)
and when i use CPCL method it print 12 BarCode always with 11 blank Patches (labels)
and i dont know why ?
it must print 1 Patch (label)
what i can do and i dont think there is eny rong with my code
all waht i want is how i can give Length and width and how much label print coz it is always print 17 or 12 what i can do ?

Why can't I print to a Zebra 2746e using the report tool kit?

I have read on here how peoople have printed barcodes from LV by sending commands directly to a zebra printer. I am using LV8.2.1 on a windows xp computer. I am sending EPL2 messages to the printer using the report tool kit, but all I get is a couple of line feeds. If I send the commands from a command prompt by coping a test file to the printer port it prints fine. Any thoughts. I have attached my program.
Attachments:
zebra tester.vi ‏22 KB

I tried your code against my printer and it works as advertised. Can you print to other printers with it?
By the way, when assembling a string you should use the Format Into String function instead of a string concatenator with a bunch of inputs. It takes up less room and is easier to interpret when troubleshooting.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Not seeing parameter values in SBO while running a crystal report w/Zebra

I am using the crystal reports addon for SAP Business One. I created a report which prints a label (1"x3") on a zebra thermal printer. If I run the report within SAP Business One with a default printer other then the zebra printer I see the drop downs for the parameter values. However when I select the values and print it , the label does not print correctly. It appears as if crystal thinks the label is 3"x1". If I try to run the report with the zebra printer as a default printer within SAP Business One, the drop downs for selecting the parameters are gone.
If I run the report within crystal 2008 directly, I have no problems with printing the label properly as long as the Zebra Printer is not the default printer. I have updated crystal 2008 with all available service packs and updates. I have made registry entries on the server and workstations to allow more than enough values to be seen in the parameter dropdowns.
Does anyone have any idea why the report will not work when being executed within SAP Business One?

Susan,
I'm not sure if the attached thread is relevant for you? I am also searching related to issues with Zebra, although mine are with PLD.
Re: Crystal Reports viewer(runtime) barcode printing problem

LaserJet 100 color MFP M175nw. impossible de réinstalé le driver de l'imprimante

Bonjour,
imprimante: LaserJet 100 color MFP M175nw.
système d'exploitation : windows 7
le scaner de marché plus , j'ai utilisé HP Print and Scan Doctor qui ma demmandé de désinstalé et de réinstalé le driver de l'imprimant.
mais impossible de le réinstalé :
Préparation ok
connection du produit ( restre longtemps sur 99%)
message d'erreur : une operation à mis trop longtemps à s'executé. il sagit d'une erreur fatale empechant l'utilisation du produit.
merci de m'aider

Hi,
Here is a document that might help resolve your issue, Echec d'impression de la tâche d'impression HP ePrint.
Please let me know if this helps resolve your issue, and good luck!
<via Google Translate>
Salut,
Voici un document qui pourrait aider à résoudre votre problème, Echec d'impression de la tache d'impression HP ePrint.
Se il vous plaît laissez-moi savoir si cela permet de résoudre votre problème, et bonne chance!
TheCurmudgeon
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Help with Zebra Label Printer and Multi Order Shipping Tool- Partial Label Printing

I have a zebra gx420d which is compatible the zebra 2844 (its the new model) and I am having a hard time printing labels with the multi order shipping tool. I have the correct driver, the printer test page works fine, and everything is configured for a 4x6 label.
I have set the selling preferences in paypal to match the zebra 2844 printer and within the mult order tool, I have edited the settings to also match zebra 2844.
My problem is that regardless of what or how I do it, my printer will only print a 1/4 of the label. It is not shrinking the label, it is starting to print at the correct size but stops 1/4 of the way through. Almost like it thinks my label size is too small but as i mentioned, I confirmed 4x6 on the label settings at both printer properties and printer preferences. I spent and hour on tech support with zebra and they confirmed the printer is working as it is supposed to. I also know this because my Amazon labels print correctly as well. Its only paypal and ebay labels that are not working. Very frustrating. Can anyone help?

Hi,
did you upload the desgin in a standard text with option ITF? This you can copy then to the layoutset. At least this is the way of working with BARONE.
Cheers,
Stefan

Imprimante Zebra

Similar Messages

Maybe you are looking for