In Air iOS, what is the path for the included folder which is above .fla file folder?
I have "assets" folder above "src" folder where .fla file is. The assets folder is included via Air iOS publish setting in Adobe Flash CS6 Professional but I'm having trouble accessing it.
the directory structure looks like this. Main.as is the document class for my project.
c:
/project
/assets
/bin
/lib
/src
/Main.as
/Main.fla
Now if the project was an action script project, I can normally access the assets folder by using a path like "../assets". But in Air for iOS project, it says the folder isn't there.
In the Air iOS publish setting window, it says the included folder path is "c:\project\assets" whereas when I move the assets folder under src folder it just says "assets" and then it can be accessed simply by using a path like "\assets".
Does anyone have an idea where the included folder is placed?
Thanks for the reply. I've tried these with nativePath property but it doesn't seem to work. I've also tried passing different path like "project/assets", "../project/assets", etc.
Normally, I'd just move "assets" folder to "src" folder but the problem is the assets folder contains like 10k files and it would slow down the Flash compiler. as it seems like Flash is scanning every file under its directory.
Similar Messages
-
Defining the path for the use of beans in a JSP
Hello,
I would like to use a bean in a JSP file, via the <jsp:usebean> directive.
I didn't find any property (weblogic property) which could define the path
to the directory of my beans classes.
So :
1) i have put the path of this directory in the weblogic classpath in the weblogic
start script.
2) i made the same with the java classpath.
Both solutions don't work at all.
Any suggestion would be appreciated.
Thanks in advance.
We use the \weblogic\myserver\serverclasses for beans..
of course we pack beans into jar files, and these jar files are included into
the wls classpath..
"Sylvain R." <[email protected]> wrote:
>
>Hello,
>I would like to use a bean in a JSP file, via the <jsp:usebean> directive.
>I didn't find any property (weblogic property) which could define the
>path
> to the directory of my beans classes.
>So :
>1) i have put the path of this directory in the weblogic classpath in
>the weblogic
>start script.
>2) i made the same with the java classpath.
>
>Both solutions don't work at all.
>
>Any suggestion would be appreciated.
>Thanks in advance.
>
-
Fixing the path for images in RoboHelp 8
I am rather new to Robohelp, so please forgive me if this has been addressed in another dicussion...I have been searching and cannot seem to find what I am looking to describe.
I am working in Robohelp 8, and creating a new help system by importing topics from a previous help system. The problem I am running into and I cannot see how to fix is that there are a couple of topics that have images where instead of the path for the image directed to a folder called "Images" in the main directory, it dumps the graphic into the project manager window when I import the topic. I tried viewing topics that don't have their images on the main project manager window, and comparing against the one that does, and I cannot see the difference. I have tried renaming the images and placing in the correct folders, and then inserting the images into the topics, but it still tries to look at the main folder and still dumps the image into the project manager.
Any help you can provide please share.I am going to say yes (because it sounds like what I am trying to get at, but not sure).....I have tried deleting the images, and recreating, and then re-inserting into the topic, and they still go to the root of project. As I am going along, I am finding more and more.....so far there are 20 images that are doing this. However, I also just did what you mentioned and dragged it and put it under the topic. But I am still confused as to why I would need to do this for some topics and for other topics the images don't appear at all (meaning they don't show under topics or root of project), they are just linked through the folder on the main directory. Does this image help more?
Left of picture above: The folder directory has a folder called Images, and this is where all of the images were stored and are stored for the new project.
Middle of picture above: The topic Horizontal Command had an image in it "image20.gif", and it was at the root directory and as you suggested I moved to the topic. Also see the topic circled Expand and Collapse Folders topic has the image circled at the left within it.
What I am trying to understand is why would the graphic from the Horizontal command topic dump into the root of the project, while the image from the Expand and Collapse Folders topic not show on the root project or even within the topic listed. (Which is what I prefer for all topics). -
How to set up the path for report in 10gAS?
I have a report which can be run in one folder A but not in the other folder B, both folder are included in the forms_path in default.env of AS. How can I set up the path for the report in AS so that the report server knows to look for the report in the folder B?
Hello,
If you don't specify the "full path name" for your reports, the file will be searched in the directories listed in REPORTS_PATH or in the directory specified in the property sourceDir
For more details :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/envvars/envvar_reports_path.htm
and
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm
Regards -
FatalInternalException The metadata for type "XYZ" did not come from a file,.....
Hy !
Did KODO have Problems if there is a mix of jdo metadata files in
build.dir and in external jar's while registering a Schema with the
MappingToolTask ?
We extracting all *.jdo files from additional jars to a metadata dir and
also copying all *.jdo files from the current build.dir, because KODO
only supports a single Fileset for the Metadatafiles.
The Ant Schema Task looks like:
<target name="schema-create-kodo" depends="init-kodo-schematool">
<echo message="Schema Create for KODO"/>
<taskdef name="kodo-schematool"
classname="kodo.jdbc.ant.MappingToolTask"
classpathRef="jdo.schematool.class.path"/>
<kodo-schematool action="refresh">
<config propertiesFile="${zeus.persistence.jdo.properties}"/>
<fileset dir="${jdo.metadata.dir}">
<include name="**/*.jdo" />
</fileset>
<classpath>
<pathelement path="${compile.project.class.path}"/>
</classpath>
</kodo-schematool>
</target>
jdo.schematool.class.path: is the Path for the KODO Schematool
zeus.persistence.jdo.properties: ist the kodo.properties file
jdo.metadata.dir: is the dir with all metadatafiles
compile.project.class.path: is the classpath including a build.dir with
class files + metadatfiles and differnet additional jar files containing
also enhanced classes with corresponding metadata files
and that fails with:
[kodo-schematool] kodo.util.FatalInternalException: The metadata for
type "class com.wuerth.phoenix.bcserver.base.versan
t.PCapacityStruct" did not come from a file, and therefore we cannot
determine where to place the corresponding mapping
information. If you are using metadata from a jar or other resource,
you should use one of the other available mapping
factories.
com.wuerth.phoenix.bcserver.base.versant.PCapacityStruct comes from a
jar which also contains a metadatafile.
We are wondering because if we exlicit give a different metadata file
via a fileset the Schematool should ignore the other Metadata files
inside the jar + build.dir !?
mfg
ChristianThe only Apple computers that have a Mag Safe connector are MacBook laptops (MacBook, MacBook Pro and MacBook Air).
The Mac mini 2010 and 2011 models have a standard power connector, I believe it is called an IEC C7 connector. You can see a picture of the back of the Mac mini here http://www.apple.com/macmini/design.html
Older Mac mini models prior to 2010 have a proprietary connector. While the following page is for a very old PowerPC Mac mini the connector is the same on early Intel Mac mini models as well. See http://support.apple.com/kb/HT3019 -
When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
How can I fix this error ?I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
In the terminal (it kept failing to download in Safari):
curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
Quit and relaunch iTunes.
Should now work for you. -
What is the path in the filesystem for the deployed Wendynpro application .
What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
Please help..Hi,
What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
If you search for your component under the /usr/<SID> folder
We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
If you have NWDI in place CTS would help in this, else you can deploy your application using sdm.
in CE you can deploy the application from NWDS.
Regards
Ayyapparaj -
HT3231 What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air
What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air
As I posted "it is an Unknown", at least to me, what type FW port is on the OPs older Mac.
LowLuster
HT3231 Re: What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air
Dec 26, 2013 8:04 PM (in response to OGELTHORPE)
But the newest Mac notebooks do not have a firewire port.
So he may need a TB to FW adapter, $29, a FW 400 or 800 cable, $??, and then a FW 400 to 800 cable/port adapter (If the old Mac only has a FW 400 port), $??.
It is unknown if the old Mac has a FW 400 or 800 port. -
I have been trying to update my iPhone 4 with iOS 5 for about 30 minutes and I keep getting the same thing. It says,"There was a problem downloading the software for the iPhone. The network connection could not be established." What do I need to do to solve this problem?
iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
What is the hex for the font colors in iOS Pages?
What is the hexadecimal for the font colors that can be used in iOS Pages (specifically, the hex for the four shades of yellow)?
Hi, cs,
Here is the palate from Numbers 3 for Mac it is the same as pages. I clicked the top yellow it would be FFCC33
quinn -
Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
What is the logic for the behavior of LV9 when opening vi references?
I recently started using LV 9 and I can't figure out what the rationale is for the LV 9 behavior when opening references to vis. The way I understand it, LV9 looks up vis using the absolute path on the disk where they came from when opening references, even if they are in memory. If just a vi name is given, LV9 tacks on the path of the referring vi on disk when trying to open the reference. So, as far as I can see, either an application opening references to vis needs to specify absolute paths to the location on disk and be modified whenever a dynamically called vi's location on disk is changed, or a dynamically called vi has to be saved in the same directory as the vi doing the calling or in a rigid and inflexible directory structure.
Example:
I am trying to use a 3rd party library whose vis open a reference to a vi that I create, the name of which is obtained from those in memory using a name pattern. The library vis get the name of the vi I created and try to open a reference to it. Previously this worked because LV looked in memory for "my.vi" when opening the reference but this fails with LV9 because it apparently looks for, e.g., "D:\VI\3rdparty.llb\my.vi", not "my.vi". So, as far as I can see, I have to save my.vi in 3rdparty.llb in order to use it. And, if I want to use 3rdparty.llb in another application, I have to save other vis to 3rdparty.llb or create a new copy elsewhere and save to that copy for the new application. A similar situation would occur if I passed the name of my vi to the 3rdparty.llb vis - either I would need to pass an absolute path and modify my application if I ever want to move my.vi, or save it in 3rdparty.llb.
Another example:
I have a large application built into an executable that calls up to ca. 60 vis using references. Previously I could just specify the path to the executable, and I could easily open references to my vis. Now (if I try to use the LV 9 file structure), I can't figure out the paths I need to open references. Either I have to specify the absolute path to the original location in my development directories, or I have to store all my source vis in some particular directory structure. If I want to reuse my vis in other applications (which I do) things would get pretty complicated. Likewise if I want to optionally open references in other vis than my top level vi (which I do), it seems well nigh impossible.
Basically I am struggling with the concept that an application remembers the directory structure where the source files were located, and/or depends on a particular directory structure of the source files to work. Maybe I'm missing some tricks that would make things easier, but someone will have to explain to me why these are good things.I appreciate the responses and explanations. I've certainly learned
some things. I have extensive experience using LV but over a fairly
narrow set of
applications so I'm certainly not aware of many of the possible
techniques. I clearly don't use LV in the same way as what appears to
be the mainstream for LV programmers.
I have some additional
comments on the various responses:
"But
with VI libraries and LVOOP this had the problem that multiple VIs could
end up with the same name..."
I'm not clear what this means exactly. My first response would be
that it doesn't seem like a good idea in general to use different
portions of code with the same name in a single application. I'm
surprised this is even possible. I don't think LV will even let me
build from a project in which it finds name conflicts for vis.
"In addition to what Rolf wrote, it should be
pointed out that LV should NOT be looking for files if you built your
app correctly. Each VI maintains a relative path to all VI it calls and
it should know exactly where to find them (assuming they're there).
I think this illustrates one thing I was talking about. The
assumption appears to be that the organization of your source files is
an essential ingredient in the application that is built, which is a
foreign concept to me. My project file knows where all my vis are, the
applications build correctly, and, using the 8.x and previous file
structure for my exe, they work, and have for some time. As far as I'm
concerned the main point of using a project that identifies my source
files is to be able to pull in code from different places - if I want to
use a different version of one of my dynamically called subvis, from a
different location, for example, I tell the project file to use the new
version and rebuild. In your scenario, as I understand it, I'm not sure
why a project file in which you identify source files is even needed,
if LV already knows everything about the components of the application
you're building. As I mentioned, my primary application uses ca. 60
dynamically called vis. Most of these control different subsystems of a
large distributed hardware control and data acquisition system. All of
these are used sometimes when the application is used, but pretty much
never all of them at once - typically something like 10-30 of the
user-interactive vis are run at once. There is some communication
between them using globals, queues, and semaphores and such, but for the
most part they are independent and I test them separately. Until the
application is built and used, there is no need to run the entire
application including all subvis, and I never do it. When I build my
application, the app builder finds all the vis I specify and constructs
the exe file including all the vis I've told it about. Before LV 9 it
never occurred to me that I might actually have to worry about being
able to find vis inside the executable.
"However as tst has mentioned having an
executable search for VIs is a VERY VERY bad idea as it can break your
entire app if it happens to find the wrong VI at some point."
I don't really follow this point at all. Where are these vis
masquerading as the ones I want that will break my application? The only
vis on the machines where my applications are used are there because I
put them there inside the executables. I certainly would never use
different vis with the same name in an application - as I said above, I
don't even know if it is possible, and don't want to find out. Search
paths to find components like shared libraries are a common thing. It
doesn 't seem like a stretch for the run-time environment to define a
default search path like "somewhere in the exe file containing the
application".
I don't want to make a mountain out of a mole hill here, as I said
before, I am happy as long as NI supports the 8.x file structure, but if
nothing else I have definitely learned to appreciate how different
executables built w/ labview are from executables constructed in other
systems. -
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
"There was a problem downloading the software for the iPhone....An unknown error occurred (-23)." What should I do?
i have the same problem:
I have an iphone 4s and I have been trying for months to update my phone from iOS 6.1.3 to the new one.
I recently got a new computer (my old harddrive crashed and will not work at all) and I just now copied all my music and photos to the computer.
Now I have been trying to update to the iOS 7.1 both on iTunes and on the iPhone but neither one work. I keeps saying "unknown error" .
I am wondering if I restore it to factory settings and then update it will the install work?
also since i have backed up to the iCloud and my computer..will i be able to recover my music, contacts, notes and photos???
thanks in advance.
Maybe you are looking for
-
Regarding IBOTS in OBIEE 11.1.1.5
Hi , My requirement is to create a new IBOT and using this ibot i have to purge the cache.This process i have to schedule it. I have to do this in OBIEE 11.1.1.5 can any one please help me in giving the steps to do this requirement. Thanks
-
How do I create an on-player playlist on a Zen X-fi?
How do I create an on-player playlist on a Zen X-fi? I've been trying to figure it out for some time now, but I can't. It's quite annoying.
-
Am i going the right way or the wrong way
hi to all my java buddeis out ther how you all doing =) well i had a question for the real professional programmers out there who are making money using their porgramming skills when i look around and see what compines are looking for, i see they mos
-
I need the button to search within a web browser I made this code but it does not work? import java.awt.*; import java.awt.event.*; import java.net.*; import java.io.*; import javax.swing.*; import javax.swing.event.*; import javax.swing.text.Caret;
-
Where does the logging in RDBMSRealm go --and-- are some JavaDocs missing?
I see that a LogOutputStream is created in the example class RDBMSRealm, but where do all of the log statements go. The LogOutputStream is created as: log = new LogOutputStream("RDBMSRealm"); but I do not see and file called RDBMSRealm and/or I do no