In CIN  cst & vat itra and inter states

Hai Guru,s
I have to give with in the state(Bangalore) selling takes place VAT applicable....Maharastra Customer buying in bangalore plant.........CST applicable...
In which combination i have to create condition records...................plz help me
Thanks

Dear Anjaneyalu
Pls close the previous thread if that answered
The access
Country
Region of del plant
Region
Cutomer tax classification
Material tax classification
or
Country
Plant
Region
Material
Try these
Hope you are working on TAXINN
Regards
Deepu Pillai

Similar Messages

  • CIN Reports and Shipping State Issue

    Hello everyone,
    Can anyone help me out on the below mentioned points:
    1. Standard CIN Reports. ( AR CST/VAT, AP CST/VAT, AP Service Tax Reports )
    2. We have around 22 plants. We are procuring materials from a Vendor (State: Karnataka) to a plant located in state Andhra Pradesh. But if the Vendor plans to ship goods from another state,
    say, Tamil Nadu. How will this impact?
    What is the procedure i need to follow? The PO will be created on Vendor(Karnataka) and what about MIGO and MIRO. My problem is with the tax codes that i need to use because it is being shipped from another state Tamil Nadu.
    How to address this issue.
    In short, Ship from state is different from the procurement vendor state, how will this be handled ?
    Any help is highly appreciated.
    Thanks,
    Anil

    For question 1 > The report is RFUMSV00 . Refer master note for VAT 818732.
    For question 2 > You have to have partner function where the goods supplier would be different. As such the purchase is from a different state in which case I believe CST will be relevant which in case of VAT based CST will have to be inventorised.

  • FREIGHT AFTER ED AND BEFORE TAX (CST/VAT)

    Hi Friends,
    We need the freight to be calculated after Excise duty and before Tax ( CST/VAT). For example
    Basic Value = 100
    ED 10% = 10
    ECS 2% = .2
    SECS 1% = .1
    10.3
    Freight = 10
    120.3
    CST 3% = 3.60
    Total Value = 123.90
    In our case Freight is calculation after TAX. But we need to calculation of CST/VAT includes freight.
    Kindly suggest how to make changes in pricing procedure.
    I created one condition in pricing procedure for freight, but the same is not transferring to tax procedure for calculation. I also created one condition in tax procedure. But value is not passing to tax procedure.
    Knidly give the solution at the earliest.
    Regards,
    Shital Deshpande

    Check in tax procedure(OBQ3) whether freight condition(Z*) is included after ed subtotal ?
    Whether you maintained condition record(FV11) for lumpsum Z* freight condition ?

  • VAT TIN and CST NO

    Dear Frds,
    Where do we maintian VAT TIN and CST NO for a comapny? if it is at plant level, then where do we maintian that in plant?
    If Possible provide Table name and field names also
    Thanks in Advance.

    Go to J1ID, select "Excise Indicator for Plant" and maintain the CST and VAT numbers of that plant.
    Table::::::::J_1IMOCOMP
    Field names are
    CST No.::::::J_1ICSTNO
    VAT No.::::::J_1ILSTNO
    PAN No:::::::J_1IPANNO
    thanks
    G. Lakshmipathi

  • Business area Not coming for CST /VAT account

    Hi,
    I am using Business area wise financial statements.System fetches business area for gl accounts  except  CST /VAT accounts  as per the configuration.
    Can this be solved through by running the program SAPF180?
    i do not know how to do this .
    GURU

    Before using substitution, refer Note 199886. Think about all possibilities and then you decide.
    BSEG-GSBER field for call point 9 (Line item) is not available for substitution. However substitution is possible but tricky.
    Good luck.
    PP

  • Scenario Base Value + Packing + Excise + Freight + CST/VAT + Octroi  + LBT

    Hi SAP,
    My scenario is as Base Value + Packing + Excise + Freight + CST/VAT + Octroi  + LBT and Inventory cost will be Toatal value  - Excise + LBT, I will provide the Example.
    Base Value         100        P000
    Packing                   1         ZPK3
    Excise (10.3)       10.4       (BEDECSSECESS) on 101 value
    Freight 10 val       10          (FRD1)
    Subtotal                121.40
    CST 12.5               15.18     (JVCS on 121.40) but in TAXINN procedure it will calculate on before Freight means 111.40 but client required on after addition of freight 121.40, I have assigned this Condition (JVCS) as statistical and remove From and TO steps it gives calculation 15.23 but correct calculation is 15.175 i am not understanding why it comes 15.23.
    Now i have to pass this (JVCS) condition value from Taxinn procedure to ZJRM00 procedure please guide me how to pass in ZJRM00. After that i will take subtotal of this means 121.40  + 15.18 = 136.58 now i will calculate on Octroi 5.5%
    Subtotal              136.58
    Octroi 5.5%         7.51       (JOCM on 136.58)  in ZJRM00 procedure
    Subtotal2             144.09
    LBT 2%                  2.88    (ZLBT on 144.09)  in ZJRM00 procedure
    Now Inventory cost will be
    Subtotal 2 (144.09) + LBT ( 2.88) - Excise (10.40) = 136.57
    Please guide me on this scenario in configuration.
    Thanks
    Shital Deshpande

    Follow the folloing pricing procedure:
    Base value          100                    
    Packing          1                    
    SUB total1          101                    
    ED          10.403          BEDECSSECESS     (remove the accrual key in the conditions)     
    Freight          10          FRD1          
    SUB total2          121.403                    
    cst          15.175375          JVCS          
    SUB total3          136.578375                    
              136.578375                    
    octroi          7.511810625          JOCM          
    SUB total4          144.0901856                    
    lbt          2.881803713          ZLBT          
    Total          146.9719893                    
    Inventory          135.6

  • CST & VAT Amount should be seperated....

    Hi,
    In my report 1 column is Tax Amount.....I want that it should be seperated by CST Amount and VAT Amount...I means:---e.g.
    Doc. No..................Tax Amount................CST Amount.............VAT Amount
    1000001.....................8000.00......................8000.00.......................................
    1000002.....................5000.00......................5000.00.......................................
    1000003.....................7000.00........................................................7000.00
    1000004.....................4000.00......................4000.00.......................................
    Here i want that, from tax Amount...CST & VAT amount should be displayed seperate....
    (look at doc. no. 1000003, here from tax Amount it goes to VAT Amount)
    Please let me know what should be condition here......
    Thanks...

    Hi Prince
    In classical output you can do something like this
    WRITE : / 1 doc_num, 10 tax_amt, 20 cst, 30 vat.
    So vat values would always be displayed after a particular length
    Pushpraj

  • Excise,cst,vat calculation

    Hi!,
    Can any one send me the material regarding procedure /rules/regulations of our government  for excise,cenvat availament, sales taxes,cst,vat in different scenarios...
    I am new to taxes...
    [email protected] or [email protected]
    thanks in advance.
    full points will be given,
    ramesh B.
    Edited by: Ramesh Balivada on Feb 12, 2008 7:20 AM

    Dear Ramesh,
    The rule for excise,cenvat availament, sales taxes,cst,vat vary from company to company, product to product within the same company. These inputs are correctly available from the client & we require to map the same accordingly. Incase of CST, it is 4% against 'C' form when product / material crosses the state boundary, but without 'C' form the LST / VAT will be applicable.
    Regards,
    Rajesh Banka

  • CST/VAT on imported material

    Hi
    Situation is
    When imported duty paid material bought in India the trader has to collect CST/VAT after CVD/Ecess/SEcess/AED depanding on interstate or within the stae transaction.
    For CST there is no issue as the CST is inventorized in material cost.
    For VAT as we get set off
    We have gone with ZIMP order type and Import vendor. Here we have not used tax code for VAT, we have created condition ZVAT and A/C key ZVA.  OBYC A/C key ZVa G/L account is defined as GRIR VAT clearing.
    So when there is MIGO, G/L A/C is credited and when we do MIRO the G/L A/C is debited hence there is no effect of capturing VAT.
    Is there any other way.

    Dear Viren,
    You have to use Tax code (depending upon your TAXINN or TAXINJ procedure) to capture this VAT.
    Bye,
    Muralidhara

  • CST/VAT on MRP

    Dear All,
    Hi
    There is a situation where, CST/VAT is to calculated on MRP, where as supplier bill is to booked on the basic price+CST/VAT, we are using condtion
    ZMRP for MRP price per unit
    PB00 for Basic price
    Can you please help us out, how to configure in
    TAXINJ and purchase pricing condition which we separate for MRP base pricing
    Regards
    Viren Shah

    Dear Viren,
    You have to use Tax code (depending upon your TAXINN or TAXINJ procedure) to capture this VAT.
    Bye,
    Muralidhara

  • Cst/vat tax classification indicator

    I'VE CREATED CTYP FOR CST & VAT (ZCST /ZVAT)
    IN CUST MASTER FOR JCST -ENTRIES -0 NO CST /1 CST APPLICABLE
    VAT -0 NO VAT/ 1- VAT APPLICABLE
    SAME I'VE MAINTAINED IN MAT MASTER ALSO
    have maintained condition record for all key combibation
    but in sales order always cst combination is geting picked up (though itis not relevant)
    rather than vat though condition record is maintained
    Pl suggest

    hi
    for cst & vat ive created different acces sequence zcst & zlst for both have given table 368 itself
    and have maintained ctype for noth cst & vat ctypes fro respective key combinations
    But in sales order analysis button CST TAX CLASSIFICATION INDICATOR IN CUSTOMER & MATERIAL IS COMING EVEN FOR VAT CTYPE ALSO
    IN customer MASTER cst  indicator  0  --   NO CST   /     1 -- VAT 1 APPLICABLE
    MATERIAL MASTER  CST  indicator  1 --    2% CST   /    2 ---VAT 4% APPLICABLE
    CUSTOMER REGION IS ka & PLANT REGION IS ka SO vat MUST COME
    bUT IN SALES ORDER  - no record is coming - in analysis button for both CST & VAT CTYPES CST INDICATOR   0 1 is coming (which is cst indicator in cust & mat master)
    VAt is not coming

  • VAT invoice and copy receipts?

    I'd like to receive a VAT invoice and be able to download one from my account.
    Why can't I do that and why can't I just download a copy receipt or at least print a statement of purchases from the site?
    Something I am missing?
    Thanks
    AA

    If the iTunes Store provides a VAT receipt, it's not something you can get on your own. You'll need to contact the iTunes Store and request one. Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to contact the iTunes Store.
    Standard receipts are always emailed to the email address associated with your account. As to why Apple has not provided a mechanism for downloading receipts or a list of purchases, that's something none of us here, who are all just fellow users, can answer.
    Regards.

  • CST/VAT from PO

    Hi,
    My client want a report for CST and VAT report for the materials purchsed.
    I can get CST/VAT percentage from KONP table.
    From which table/field can I get the CST value and what values need to be passed to get CST/VAT value?
    Kindly suggest
    Thanks
    NDS
    Edited by: Naveen D' Souza on Mar 23, 2011 3:25 PM

    Hi Bindal,
    Origin of Project costs lies in other modules.
    Pls get you Tax procedure checked by FI/MM. In Tax procedure there will be various Conditions used by your organization. Each Condition type will have an Account Key.
    If that account key has 'Non Decutible' checked then the related tax amount will form cost on your project and vice versa.
    if your organization is producing something using thses input materials then it would want to benifit itself by taking credit for Modavat/Cenvat against the Excise and other recoverable taxes it paid during the purchase of input materials.
    Hence as a correct business practise such taxes will be correctly set as 'Dedutible' in Tax settings so that instead of getting inventorized the'y be offsetted and amount would be posted to some clearing amount.
    In short MM would (correctly) not recognize these taxes amounts as cost and thus these values will not flow to PS also as Commitment cost or actual/statistical cost.
    with regards,
    Ravi Shrivastav

  • When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the SearchText and IF statements that change the URL depending on what is typed?

    When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the searchTerms and IF statements that change the URL depending on the searchTerms? Every time I try to add something firefox doesn't want to add it as a search plugin. I need to create a more powerful search tool for personal use.

    I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

  • I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

Maybe you are looking for