In condition records section Search help problem at one data type

hi there,
we are upgrading 4.6c version to ecc 6.0 past january. but in
vk11/vk12/vk13 condition master records sections, we have a problem for
one data type search help. when we want to join sales deal code to sales
detarmination condition, at one tables rows type price list (data type =
pltyp_d) does not allow f4 (search help).
thanks your interesting.
Sinan Altıner
Betek Boya ve Kimya Sanayi A.Ş.
SAP CONSULTANT / ABAP Developer

Hi surya,
I per your suggestion i did like this ,
data : date1 like sy-datum.
types : w_date1 type sy-datum.
date1 = w_date1(ztable-date1). "ztable-date1 - is screen field.
but it is giving error "The field "W_DATE1" is unknown, but there is a field with the similar name "DATE1" . . . ."
actually that value is coming after triggering PBO event but i want that value in at time of calling F4 help at that screen filed
suppose on screen the fields like
date : 30.08.2008.
matnr : ( .............F4 ) '".....on this field when i m pressing F4 that time only that above date materials should come as per my first query see my first thread.
thanks,
Sanket.

Similar Messages

How to add a search help to a field Bank Type in Transaction FK02

Dear All,
     How to add a search help to a field Bank Type in Transaction FK02.
     Is there any possibilty of using exit or searc help or domain to solve this problem.
        Thanks in Advance..
Thanks,
Lakhsmi.

Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin

Problem in creating data type

hi..
i've problem in creating data type in xi after importing idoc from the R/3 sender
plz tell me the basic steps for creating data type in the receiver i.e xi.....
thanks in advance

Hi,
You don't need to create a data type after importing the IDOC.
Idoc itself acts as message type and message interface.
check this for creating a data type..
http://help.sap.com/saphelp_nw70/helpdata/en/2d/c0633c3a892251e10000000a114084/frameset.htm
Thanks,
Vijaya.

Search Help Problem - Passing parameter between to search helps.

I created following 2 table for entering data in PO screen using ME21N using Custom Data Tab.
ZSTATE_TAB - State table (has elementary search help ZSTATE_SH - Value of SCODE is exported)
SCode(Key)     Description
S001           New York
S002          Virginia
S003          West Virginia
ZCITY_TAB - City Table (has elementary search help     ZCITY_SH - Value of SCODE is imported)
SCode(Key)     CCode (Key)     Description          Level
S001          C001          New York City          L001
S001          C002          Rochester          L002
S001          C003          Buffalo               L003
S002          C004          Richmond          L029
S002          C005          Fairfax               L030
I have created an custom input field LEVEL in t-code ME21N in Customer Data Tab.
I want to create search help for LEVEL using import parameter STATE & CITY .
On selection screen of search help two selection parameters STATE and CITY are displayed.
Step 1:User press F4 for getting list of state and selects any state using search help ZSTATE_SH (Value of SCODE is exported)
Step 2:User press F4 to get the list of City using search help ZCITY_SH, based on state selected in Step 1. (Value of SCODE is imported)
In Step 2, I want to see only the cities selected in Step 1. But instead all Cities are displayed in hit list.
I also created a table maintenance program SM30 for ZCITY_TAB, the search help ZCITY_SH is correctly displaying the data in hit list according to the State selected in ZSTATE_SH.
But it is not displaying the correct list for cites in ME21N.
Kindly help me in fixing this problem.
Thanks in advance.

here is the answer from [sap library - Value Transport for Input Helps - Parametrizing the Import Parameters of the Search Help|http://help.sap.com/saphelp_nw2004s/helpdata/en/35/bdb6e2c48411d1950800a0c929b3c3/frameset.htm] :
If the search help is attached to the table field ( Attaching to Table Fields) or to the check table of the field ( Attaching to Tables), a value transport can take place for all the screen fields that are linked with a parameter of the search help.

Need to add a record in search help

Hi all,
I have field in my selection screen with search help.
serach help contains 4 records i need to add 5 th record in that search help how can i add that one.
Thanks,

check it out may be helpful for u
Re: how to add a value/entry in a exisiting search help
check the below link also
http://help.sap.com/saphelp_nw04s/helpdata/en/b3/4d3642eca5033be10000000a1550b0/content.htm
Regards,
Naveen

Search help problems

Hi All,
we are facing problems with search helps. The search help doesnt work when ever there is an error in the UI.
If there is an error in the application window and the user press F4, the error is coming up on the search help window also. Now any value selected in the personal value list is working fine. But if we go to More Values to provide filter criterion, the search help window hungs up. It wont respond at all.
Any one knows how to resolve the issue. Please let me know.
Thanks,
Anand

Maybe thats a SAP standard error.
Have you looked at OSS / notes search page?
Regards, Matthias

Search help - problem

Hi All,
i have created a search help with input parameters. i have a material number as a input field and other parameters as well and MARA is the selection table. When i enter material no, say XX_XXXXX* in the input field, i expect to get all the materials in that pattern in the hitlist. Problem is matnr stored in other format in MARA say XXXXXXXXXX. So its returning null entries..
how to handle this problem
Regards
Shekhar

Hi Shekar..
this is sample code just copy and execute. it to set your desired result..i think it will set you requirement.
SAMPLE CODE:
REPORT ZGSHELP                       .
tables: vbak,vbap,likp,lips.
parameters: p_vbeln like vbak-vbeln.
at selection-screen on p_vbeln.
ranges: gr_vbeln for vbak-vbeln.
data: begin of gt_vbeln occurs 0,
        vbeln like vbak-vbeln,
      end of gt_vbeln.
data: gv_repid   type sy-repid,
      gv_dynnr   type sy-dynnr.
gr_vbeln-sign = 'I'.
gr_vbeln-option = 'CP'.
gr_vbeln-low   = p_vbeln.
append gr_vbeln.
select vbeln
    from vbak
    into table gt_vbeln
where vbeln in gr_vbeln."5000000355
   where vbeln like '50000005'.
   if sy-subrc eq 0.
   call function 'F4IF_INT_TABLE_VALUE_REQUEST'
     exporting
       retfield               = 'VBELN'
      DYNPPROG               = gv_repid
      DYNPNR                 = gv_dynnr
      DYNPROFIELD            = 'P_VBELN'
     tables
       value_tab              = gt_vbeln.
   endif.
UR's
GSANA

Process On Value Request with Search Help Problem

I have a screen with a field that has a custom search help attached to it. I am using Process On Value-Request which ultimately uses function module F4IF_FIELD_VALUE_REQUEST to return the selected value from the search help. The value is then moved to the screen field.
THE PROBLEM: If I enter a value in a field on the screen, then use the search help from a different field the first value I entered gets cleared. Here is a code sample. Any suggestions as to why this is happening?
NOTE: The values that get cleared are fields on the screen that I do not reference at all in user_command_2501.
*****SCREEN 2500 FLOW LOGIC*********
PROCESS BEFORE OUTPUT.
MODULE status_2500.
PROCESS AFTER INPUT.
MODULE user_command_2500.
PROCESS ON VALUE-REQUEST.
FIELD makt-matnr MODULE user_command_2501.
MODULE user_command_2501 INPUT.
ok_code = sy-ucomm.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
            searchhelp      = 'ZWS_ASSETMATR'
            fieldname       = ' '
            tabname         = ' '
       TABLES
            return_tab      = search_itab
       EXCEPTIONS
            no_values_found = 1.
MOVE search_itab-fieldval TO: makt-matnr.
REFRESH search_itab.
SELECT SINGLE maktg FROM makt INTO crea_description
    WHERE matnr = search_itab-fieldval.
MOVE 'I' TO scrn_attr_sw.
sy-ucomm = 'ENTER'.
LEAVE SCREEN.
CALL SCREEN 2500.
ENDMODULE.                 " user_command_2501 INPUT
Message was edited by: Jason DeLuca
Message was edited by: Jason DeLuca

Hi Jason
It seems you should first revise your code since your POV is not implemented so good.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Search help Problem for Sales Org

Hi All ,
I have created a new 'Z' table and have a table maintenance for that . I need to attach search help for the field VKORG . I have attached C_VKORG in the table itself . But I'm not able to see any values for sales org .
I checked with the other standard table . It has the same search help but it was giving values there . I'm not able to find what the problem is .
Can you guys suggest any thing ?
Thanks ,
Shounak M.

Hello,
What is your release of CRM?
For the values of sales org, should you not use the search help :CRM_ORGMAN_SALES_ORG?
Regards,
Frédéric

CRM_BSP_FRAME search help problem

Dear firends
I m having a problem with populating the search help for the Product profile wich has appliation CRMM_BSP_ACCOUNT_FS, I have created a search help with user exit Z_BP_GET_ADDRESS_EXIT, here i am accessing the address numbers, I have usesd this exit in Transaction EEWB ZBP_Product_Profile..under the (TASK) CRM_BUPA_PCUITD for the portal,, where this search work in SAP GUI...(i have attached this fumction module for BP transaction also) correctly and have no trouble. where it is not working in portal.. please tell me the what could be the problem is i ll be really thankful to you...
I m giving you the search help code also...
FUNCTION Z_BP_GET_ADDRESS_EXIT.
""Local Interface:
*" TABLES
*"      SHLP_TAB TYPE SHLP_DESCT
*"      RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*"     VALUE(SHLP) TYPE SHLP_DESCR
*"     VALUE(CALLCONTROL) TYPE DDSHF4CTRL
IF CALLCONTROL-STEP = 'SELECT'.
    DATA: PARA TYPE tpara-paramid VALUE 'BPA',
          PARTNER TYPE BU_PARTNER,
          ADDRESS TYPE BU_ADDSC,
          T_ADD_NO TYPE STANDARD TABLE OF BAPIBUS1006_ADDRESSES_INT,
          LINE TYPE SEAHLPRES,
          ADD_NO_LINE TYPE BAPIBUS1006_ADDRESSES_INT.
   GET PARAMETER ID PARA FIELD PARTNER.
MOVE '0000000061' TO PARTNER.
    DATA: ES_BUT000     TYPE     BUS000___I,
ES_BUT000_OLD     TYPE     BUS000___I,
ET_partner TYPE TABLE OF BAPIBUS1006_KEY.
    CALL FUNCTION 'BUPA_ADDRESSES_GET'
     EXPORTING
       IV_PARTNER                     = PARTNER
IV_PARTNER_GUID                =
IV_ADDRESS_TYPE                =
IV_OPERATION                   =
IV_VALID_DATE                  = SY-DATLO
IMPORTING
EV_STANDARD_ADDRNUMBER         =
EV_STANDARD_ADDRGUID           =
EV_STANDARD_USED_INSTEAD       =
     TABLES
       ET_ADDRESSES                   = T_ADD_NO
ET_ADDRESSES_ALL               =
ET_RETURN                      =
    LOOP AT T_ADD_NO INTO ADD_NO_LINE.
      CALL FUNCTION 'BUA_ADDRESS_DESCRIPTION_GET'
       EXPORTING
          I_PARTNER                        = PARTNER
    I_PARTNERGUID                    =
    I_OPERATION                      =
          I_ADDRNUMBER                     = ADD_NO_LINE-ADDRNUMBER
    I_ADDRGUID                       =
    I_BUT000                         =
    I_XMEMORY                        = ' '
    I_XWA                            = ' '
    I_VALDT                          = '00000000'
    I_VALDT_SEL                      = '00000000'
    I_VALDT_SEL_NAMES                = SY-DATLO
       IMPORTING
    E_DESCRIPTION                    =
          E_DESCRIPTION_STREET             = ADDRESS
    E_XSTANDARD                      =
    E_XFIX                           =
    E_DESCRIPTION_LONG               =
    E_ADDRNUMBER                     =
    E_DESCRIP_STREET_WITH_NAME       =
EXCEPTIONS
    NO_ADDRESS_FOUND                 = 1
    WRONG_PARAMETERS                 = 2
    INTERNAL_ERROR                   = 3
    DATE_INVALID                     = 4
    OTHERS                           = 5
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CONCATENATE ADD_NO_LINE-ADDRNUMBER ADDRESS INTO LINE-STRING.
      INSERT LINE INTO TABLE RECORD_TAB.
    ENDLOOP.
    CALLCONTROL-STEP = 'DISP'.
ENDIF.
ENDFUNCTION.
thanking you..
regards,
Naim
Message was edited by: Naim Khan S Babi

Hi,
I think you may use F4 Help feature on the PC-UI.
1. Inherit model access class where the field is defined.(field type must be "Input field" and F4 Application "VALUE_TABLE"). Update blueprint tables.
2. Redefine FILL_DROPDOWN_LISTBOX method.
3. Insert your logic to fill CT_DROPDOWNLB_DATA parameter as required.
Code sample
METHOD if_crm_bsp_model_access_il~fill_dropdown_listbox.
TYPES:
    BEGIN OF t_listbox_data,
      key   TYPE AD_ADDRNUM,
      value TYPE AD_STREET,
    END OF t_listbox_data.
DATA:
    lw_data TYPE REF TO data,
    lw_listbox_data TYPE t_listbox_data,
    li_data TYPE REF TO data,
    li_listbox_data TYPE TABLE OF t_listbox_data,
    li_listbox_data_temp TYPE TABLE OF t_listbox_data.
FIELD-SYMBOLS:
    <fi_listbox_data> TYPE table,
    <fw_listbox_data> TYPE t_listbox_data,
    <fw_ddlb> TYPE crmt_dropdownlistbox_data.
* HERE FILL li_listbox_data WITH YOUR LOGIC)
* Looping over all dropdown list values
LOOP AT ct_dropdownlb_data ASSIGNING <fw_ddlb>.
*   When the custom field is processed
    IF <fw_ddlb>-fieldname EQ 'YOUR_FIELD'.
*     Creating the objects.
      CREATE DATA li_data TYPE TABLE OF t_listbox_data.
      CREATE DATA lw_data TYPE          t_listbox_data.
*     Assigning field symbols.
      ASSIGN li_data->* TO <fi_listbox_data>.
      ASSIGN lw_data->* TO <fw_listbox_data>.
*     Copying the retrieved lines.
      <fi_listbox_data>[] = li_listbox_data[].
*     Name of the key column
      <fw_ddlb>-keycolumnname   = 'KEY'.
*     Name of the value column
      <fw_ddlb>-valuecolumnname = 'VALUE'.
*     Moving the data to the table
      MOVE li_data TO <fw_ddlb>-data.
    ENDIF.
ENDLOOP.
ENDMETHOD.
Hope it helps,
David

Saving Search Help - Problem assigning package

Hi,
I have developed a ALV report, Where I have used only one 'Z' table. I want to create search help for a particular input field in the selection screen.
I tried to create search help in se11.
After giving all the required information, I am not able to save it under any package at all.
It gives an information saying, Search help cannot be assigned under this package.
I have tried it under many packages and also tried to save it as a local object, But no go.
How can I save and activate this ?
Please help !
Thanks in advance
Edited by: Matt on Sep 5, 2011 6:40 AM

Hi
I think you created search help name not starting with Y or Z, but with SAP reserved names. Because of this you are not able to save by assigning a package and TR.
Please change the same to starting with Y or Z.
Custom Search Help
Shiva

Search Help problem in IT0033 (Statistics) in ECC 6

Hi All,
Iu2019m facing an error when trying to update the Statistics in HR Master Data.
I enter the Personnel no. and Infotype 33 (Statistics) and press Display button. It takes you to Display Statistics Screen.
The error occurs when I hit the dropdown button of the second line of Statistical Exceptions.
Letu2019s say that I have two Statistics (01 and 02) and the Statistical exceptions for each one.
When I hit the dropdown button to see the Statistical exceptionsu2019 list for the Statistics 01, the Search Help brings only the Statistical exception related to this Statistics (01). But, when I do the same thing for Statistics 02, the Search Help brings me all the Statistical exceptions, not only values related to Statistic 02.
Debugging the program I could see that for each dropdown the debug starts in a different point of the program.
Someone please could help me?
Thanks.

Hi Muralidaran,
make sure that you have the right kernel for your service pack. SAP notes 919184 and 902694 tell you the required kernel patch level for SP 15 and SP 16.
Best regards,
Klaus

Search help problem in ALV output for field TD24A-DISMM

Hi Abap-Experts,
      I have one issue regarding simple ALV report.
      I need to display search-help for field DISMM. I have used below code in ALV fieldcatalog.
      ts_fieldcat - tabname = 'TD24A'.
      ts_fieldcat - tabname = 'DISMM'.
      I have attached search-help for fields such as MATNR and WERKS too.
      The search-helps are getting displayed for MATNR as well as WERKS.
      But, the search-help is not gettting displayed for field DISMM(RP-TYPE) .
         The output displayed is done using Simple ALV.
        Could anyone please help me and correct my code or logic i have used.

Hi,
I have changed code a bit...and used T438A table.
CLEAR ts_fieldcat.
ts_fieldcat-col_pos = '5'.
ts_fieldcat-fieldname = 'DISMM'.
ts_fieldcat-seltext_l = text-014.
ts_fieldcat-outputlen = 2.
ts_fieldcat-reptext_ddic = ''.
ts_fieldcat-ref_tabname   = 'T438A'.
ts_fieldcat-ref_fieldname = 'DISMM'.
ts_fieldcat-ddic_outputlen = '2'.
ts_fieldcat-input         = 'X'.
APPEND ts_fieldcat TO gt_fieldcat.
still it is not showing me the F4 help in simplae ALV output..
kindly help me

Standard search help problem with merchandise category

Hi,
I am not sure if i am posting into the right forum. Any hints would help.
The transaction RWBE is run on ECC6 and a search help is triggered for merchandise category (first field).
A second screen appears to enter the range..I just press enter and it gives me a range of value to select from.
It works fine.
But the same transaction is called in our Portal and the search help goes for a short dump when pressing enter from the second screen.
I debugged both ECC and portal for this transaction and found that the function module TABCONTROL_RETRIEVE_SEL_OPTS is returning different values that is causing the short dump in portal.
The value of the parameter for select_options is returned as
SHLPNAME                       SHLPFIELD                      SIGN OPTION
HUGO                          |1801                          |I   |IQ     |
HUGO                          |1803                          |I   |IQ     |
if you see the option is returned as IQ and hence causing the short dump.
I am not able to find out how this value is returned. Because if you see inside the above function module, another function module DP_GET_TABLE returns the above value. But when i debug it, i am directed to DDIF_FIELDINFO_GET fm and hence not able to understand how the above values are retrieved.
Any help would be rewarded.

Try using shlp instead of table shlp_tab

KOST : Search Help Problem

Hello All,
we are doing ECC6 Upgrade, due to return to standard, custom elemetary search helps are missing in standard collective search help KOST.
I have added two custom elementary search helps to standard collective search help KOST.
now the issue is, selected possible values are displayed and then after choose any value it's not returned to screen field.(this issue is only with custom search help added but other standard search help are working fine)
i checked all, even import and export are selected correctly in my custom elementary search help.
Only the difference is search help exit available in ECC6 for KOST but not in 4.7.
Kindly let me know suggestion on this issue.
Thanks,
Munvar Basha.

Hi Max,
Thanks for your answer.
They are executing the search entering selection criteria. In this case they should not tget their personal list.
I already tried and created my own personal list, and I was able to execute the search properly.
Br.
Csaba

In condition records section Search help problem at one data type

Similar Messages

Maybe you are looking for