In Design not starting up.

Hi; I installed the complete CS6 on a Win 7 x64 Acer M5 laptop.
Everything works except In Design.
I re-installed In Design and it made no difference.
The program closes before fully starting and Windows just says the program closed and has a problem which it can't identify.
Adobe gives no error messages.
How can i get this program to work????????????

Check the below articles, they should help.
http://helpx.adobe.com/creative-suite/kb/troubleshoot-launch-issues-problems-cs5.html
http://helpx.adobe.com/indesign/kb/hang-freeze-open-create-file.html

Similar Messages

[BO XI 3.1] BO Designer not starting after installing SP5

Hello All!
I installed SP5 on top of BO XI 3.1 SP3 (Windows Server 2008 R2 64bit) on server. There is an issue that Designer is not starting. The process designer.exe shows up in "Task manager" for 1-2 second and disappear. No entries in Event Viewer and in BO logs. I also installed SP5 on client desktop machine and the same happens.
Do you have any tips/advices? Thanks for that!
Bartosz

Hello,
we are not aware of such type of problem and it is most likely something peculiar to the configuration or architecture of your deployment.
I would analyze trace logs from Designer and from Process Monitor ( [http://technet.microsoft.com/en-us/sysinternals/bb896645] )
My advice is to open a support message because is a complicated investigation that probably will need some remote support as well
Thanks
Best regards,
Simone

Fiori launchpad designer not starting on ERP HANA trial

Dear all,
I would like to start the FLP designer using URL: http://yourip:50000/sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html?sap-client=100&sap-language=EN
Trying this ends in:
I have done a search and took a look to: SAP Fiori - SAP Fiori launchpad troubleshooting
but Im not able to find something matching regarding my issue or maybe dont understood something properly. In fact the message is telling me gateway is down, as I got it the demo case should contain anything that needs to run Fiori stuff properly. Did I missed some configuration maybe? Thank you,
regards

Sorry, own fault, client 100 was a bad idea, works well on 102.
cheers

Livecycle Designer not starting !

Hello, I tried to start up Designer on a laptop (with Vista) with full Acrobat 8 Professional installed but its closing automatically just after briefly showing the window with the Designer logo.. and then Acrobat opens.
Would anyone happen to know what the problem could be?
Thanks in advance hopefully :)

This could be related to running an Acrobat 8 "trial version". If your trial version has expired, you need to uninstall it, and install a full version. Just a guess.

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Could not start Layout Designer (see long text)

Dear All,
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Refer also to SAP Note 1121176.
Note : I have already checked forums and also the long text file , i have installed SAP gui 720 with latest patch even though , we are getting the same error . or i have to installed ADOBE LIFE CYCLE DESIGNER to user PC ?
Note :
One of the forum is mentioned ,we can also download and install the newest SAP GUI (what is 7.2 i believe) which has LCD as a part of installation.
but still i am getting error .
SAP gui Details :
SAP PC VERSION INFORMATION: saplogon.exe
MAIN MODULE INFORMATION:
   saplogon.exe
   SAP Logon for Windows
   720 Final Release
   7200.3.9.1071
   1286983
SYSTEM INFORMATION:
   Operating system: Microsoft Windows XP 5.1 (2600)
                     Service Pack 3
Kindly advise.

Please let me know the path and it can be used permanent ? or it will ne expired ?
Thanks
Edited by: satheesh0812 on Nov 29, 2011 12:17 PM

Design standard 5.1 -illustrator does not start

Hello. I´m using an design standard 5.1 - and only my illustrator does not start a few weeks ago. what could be the problem?

Please post this question in the Illustrator forum. You’ll get far more attention there.

Could not start Layout Designer

When i press layout button in adobe forms (SFP) i am getting the following error..
LONG TEXT:
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).

Hi Kodandarami Reddy.S ,
Which web site did you downlad the adobe lifecycle v8.0 ? I have to install this program to make a adobe forms.
Regards
recoba561161

Sharepoint Designer workflow not starting or listing.

I have some designer workflows running on my list. One of them is a workflow that runs on
item creation. Sometimes this workflow is skipped when an item is created in the list. This workflow does not get listed for the item. This happens just once in a while but it affects the application a lot. Sometimes none of the workflows are
listed for the particular item when i check the workflow settings.
P.S:- All items created using user accounts only

if the Item is created using System Account, the workflow will not start automatically. check whether there is any difference between the items created withno workflow and the working ones.
Qiao Wei <br/> My blog:http://blog.goobol.com

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

After Successfull Installation of Photoshop Element 3.0 On Mac OS 10.6.8, Photoshop Elements does not start saying that personalization information is invalid or missing

I have installed Photoshop Elements 3.0 from original disk on my MacBook Pro with Mac OS 10.6.8. The installation was successful. However, when I try to run Photoshop Elements, it does not start, with the message "Could not complete your request because of missing or invalid personalization information". I uninstalled Adobe Elements and deleted all Adobe files from both the System Library Preferences and from the User Library Preference. Then tried the installation again. The installation was successful, but the application fails to start with the same missing/invalid-personalization-information message.
Please advise

I am sorry Invalid Personalization but Photoshop Elements 3.0 requires a PowerPC processor or Rosetta installed in order to function. You can find the system requirements at System requirements | Adobe Photoshop Elements.
You may want to try following the steps listed at Mac OS X 10.6: If you need to install Rosetta to attempt to install Rosetta. That may still not resolve your licensing issue however as the application was also designed for Mac OS 10.2.8 and 10.3.

SharePoint Online workflow not starting

Hi All,
I am an administrator for a company and I have been asked to create a workflow for them.
I created 2 workflows using SharePoint designer 2013. The 2010 workflow works as expected.
I created the 2013 workflow because I can use loops. However the 2013 workflow doesn't automatically start when an item is created. but works if I start it manually. I have checked and made sure that the check box is ticked for the workflow to start automatically.
The workflows go like this.
Step: Query Type
If Current Item:Query_Type equals Phone
  Set Status to Opportunity
Else
If Current Item:Query_Type equals Email
  Email Current Item:Sales_Rep2
  Pause for 0 days, 0 hours, 15 minutes
  If Current Item:Follow_Up equals No
   Email Current Item:Sales_Rep2
Step: Rental or Not
If Current Item:Rental equals Yes
  Email Current Item:Sales_Rep2
  Pause for 0 days, 1 hours, 0 minutes
  If Current Item:Quote_Sent equals No
   Email Current Item:Sales_Rep2
  Else
  If Current Item:Rental equals No
   Email Current Item:Sales_Rep2
   Pause until Current Item:Date to Send Quote
   Email Current Item:Sales_Rep2
And the 2013 one goes like this
Stage:Follow Up
Loop: Email to manager
  The contents of this loop will run repeatedly while: Current Item:Follow_Up equals No
   Pause for 0 days, 1 hours, 0 minutes
   If Current Item:Follow_Up equals No
    Email Current Item:Manager
If Current Item:Follow_Up equals Yes
  Set Status to Opportunity
Transition to stage
Go to Rental or Not
Stage:Rental or Not
Loop: Escalation
  The contents of this loop will run repeatedly while: Current Item:Quote_Sent equals No
   Pause for 2 days, 0 hours, 0 minutes
   If Current Item:Quote_Sent equals No
    Email Current Item:Manager
Loop: Escalation
  The contents of this loop will run repeatedly while: Current Item:Quote_Sent equals No
   Pause for 7 days, 0 hours, 0 minutes
   If Current Item:Quote_Sent equals No
   and Current Item:Date to Send Quote is greater than Current Item:Date to Send Quote
    Email Current Item:Manager
Transition to stage
Go to End of Workflow
If this makes sense? If not can anybody give me advice on how to get this working the way it is expected to work?

Hi,
From your description, After you modified the workflow and added "App Step" to it and "Pause" actions apart from few other modifications, you got the issue that
SharePoint 2013 Workflow not starting when a new item is crated.
Whether you got the issue Before you modified the workflow.
I have done a test in my SharePoint 2013 and it works fine.
I suggest you update SharePoint to the latest CU.
Here is an blog similar with your issue, you can use as a reference:
http://blogs.msdn.com/b/sridhara/archive/2014/08/19/fix-sharepoint-2013-workflow-recursion-prevention-part-1.aspx
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I down

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here. The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

Hi Jeff,
Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
Sincerely yours.
Peter

Workflow 2013 does not start automatically but 2010 yes

Hello everyone,
I'm facing to a strange issue on my SharePoint 2013 server:
A workflow creates an item in an other list.
This list has two workflows created by Designer 2013, one 2010, the other in 2013. The two are configured with the "Start when item created".When the item is created, 2010 starts but not the 2013.
I'm not using the system account and I have two workflows to understand why the 2013 is not started automatically.
Regards,

Here is something similar..
http://stackoverflow.com/questions/17222287/sharepoint-2013-workflow-not-firing-when-document-checked-in-but-works-if-checke
Bala

In Design not starting up.

Similar Messages

Maybe you are looking for