In ECC application server getting hang becase of RFC's calls
When ever BOP jobs running on SCM system it is doing no of rfc calls from ECC system, almost all the workprocess is occupying and it is causing application server to be hang. We have created RFC logon Groups (RZ12) parallel_generators, the we assign these groups in SMQS, SMQR. Even though we are still facing the same issue.
Can you explain how logon groups use SMQS, SMQR and Could you please suggest how we can restrict the RFC calls?
Thanks
Mani
Hi Mani,
I try to explain to you as simple as I can.
1) In your source system (APO/SCM), BOP batch program generate tRFCs/qRFCs and store them into outbound queue.
2) In your source system (APO/SCM), qRFC outbound scheduler send the data to target system (ECC) through RFC group (rfc resource management parameters works here), and maximum number of connection per destination (SMQS) can be defined to limited the connection to target system
3) These RFC connections logons to target system (ECC) through the RFC definition which you can use LB, i.e. logon group (SMLG).
4) Same number of work processes (as number of activated connecions) will be activated (running), these processes write the data into inbound queue of your target ECC system.
5) target system (ECC) inbound queue scheduler, pick up the data (trfc/qrfc) in the queue, and send to work process of RFC group(RZ12), these work processes execute the inbound processing application.
6) inbound processing appliation might generate outbound tRFC/qRFC, trigger above processing again (target and source system exchanged)
i would recommend you increase parameter rdisp/rfc_min_wait_dia_wp in your ECC system for now, and also decrease the "Max.Conn." of the ECC destination in your APO/SCM sytem for immdiate remedy.
You need review your system resource ad configuration, business scenarios etc in detail and then optimize your qRFC and RFC resource configuration.
You should be able to find a lots of oss note by searching use key words "RFC" and "resource"
Good luck!
Denny
Similar Messages
-
my sun application server 8 hang whenever i access the admin console (http;//localhost:4848). and when i look at the task manager in process tab appserv.exe. it does not running in memory.
thanks for your reply.Hi, I'm having the same problem. When I start the Server from within Netbeans, I get the message "Starting Sun Java System Application Server" and then nothing else happens. Here's the log:
[#|2006-09-04T14:45:35.312-0400|INFO|sun-appserver-pe9.0|javax.enterprise.tools.launcher|_ThreadID=10;_ThreadName=main;|
D:/Sun/AppServer/jdk\bin\java
-client
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=D:/Sun/AppServer/domains/domain1/logs/server.log
-Djava.endorsed.dirs=D:/Sun/AppServer/lib/endorsed
-Djava.security.policy=D:/Sun/AppServer/domains/domain1/config/server.policy
-Djava.security.auth.login.config=D:/Sun/AppServer/domains/domain1/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=D:/Sun/AppServer/domains/domain1/config/keystore.jks
-Djavax.net.ssl.trustStore=D:/Sun/AppServer/domains/domain1/config/cacerts.jks
-Djava.ext.dirs=D:/Sun/AppServer/jdk/jre/lib/ext;D:/Sun/AppServer/domains/domain1/lib/ext;D:/Sun/AppServer/javadb/lib
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Dcom.sun.aas.classloader.optionalOverrideableChain=appserv-ws.jar,commons-logging.jar,commons-launcher.jar
-Dcom.sun.aas.classloader.appserverChainJars=admin-cli.jar,admin-cli-ee.jar,dbschema.jar,j2ee-svc.jar
-Dcom.sun.aas.classloader.serverClassPath.ee=%HADB_HOME%/lib/hadbjdbc4.jar,D:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,%HADB_HOME%/lib/dbstate.jar,%HADB_HOME%/lib/hadbm.jar,%HADB_HOME%/lib/hadbmgt.jar,D:/Sun/AppServer/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Dcom.sun.aas.configName=server-config
-Ddomain.name=domain1
-Djmx.invoke.getters=true
-Dcom.sun.aas.promptForIdentity=true
-Dcom.sun.aas.classloader.optionalOverrideableChain.ee=
-Dcom.sun.aas.instanceRoot=D:/Sun/AppServer/domains/domain1
-Dcom.sun.aas.domainName=domain1
-Dcom.sun.aas.classloader.sharedChainJars=javaee.jar,D:/Sun/AppServer/jdk/lib/tools.jar,install/applications/jmsra/imqjmsra.jar,commons-launcher.jar,D:/Sun/AppServer/imq/lib/jaxm-api.jar,D:/Sun/AppServer/imq/lib/fscontext.jar,D:/Sun/AppServer/imq/lib/imqbroker.jar,D:/Sun/AppServer/imq/lib/imqjmx.jar,D:/Sun/AppServer/imq/lib/imqxm.jar,D:/Sun/AppServer/lib/ant/lib/ant.jar,appserv-ws.jar,mail.jar,jsf-api.jar,jsf-impl.jar,appserv-jstl.jar,appserv-env.jar,jmxremote_optional.jar,D:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,commons-logging.jar,activation.jar,appserv-rt.jar,appserv-admin.jar,appserv-cmp.jar
-Dcom.sun.aas.classloader.sharedChainJars.ee=appserv-se.jar,appserv-ee.jar,%HADB_HOME%/lib/dbstate.jar,%HADB_HOME%/lib/hadbjdbc4.jar,jgroups-all.jar,D:/Sun/AppServer/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.xml.bind,javax.help,javax.portlet
-Dcom.sun.aas.classloader.serverClassPath=D:/Sun/AppServer/lib/install/applications/jmsra/imqjmsra.jar,D:/Sun/AppServer/imq/lib/jaxm-api.jar,D:/Sun/AppServer/imq/lib/fscontext.jar,D:/Sun/AppServer/imq/lib/imqbroker.jar,D:/Sun/AppServer/imq/lib/imqjmx.jar,D:/Sun/AppServer/lib/ant/lib/ant.jar,D:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar
-Dcom.sun.aas.classloader.appserverChainJars.ee=
-Dcom.sun.aas.configRoot=D:/Sun/AppServer/config
-Djava.library.path=D:/Sun/AppServer/jdk\jre\bin\client;D:\Sun\AppServer\lib;D:\Sun\AppServer\lib;D:\Sun\AppServer\jdk\bin;.;C:\WINNT\system32;C:\WINNT;D:\Sun\AppServer\lib;D:\Sun\AppServer\bin;D:\Sun\AppServer\lib;D:\Sun\AppServer\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;%JAVA_HOME%\bin ;C:\SQLLIB\BIN;C:\SQLLIB\FUNCTION;C:\SQLLIB\SAMPLES\REPL;C:\SQLLIB\HELP;C:\IMNNQ_NT;D:\Sun\AppServer\bin;D:\Sun2\AppServer\bin;;;
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-Dcom.sun.aas.installRoot=D:/Sun/AppServer
-Dcom.sun.aas.ClassPathPrefix=
-Dcom.sun.aas.ClassPathSuffix=
-Dcom.sun.aas.ServerClassPath=
-cp
;D:/Sun/AppServer/lib/appserv-launch.jar
com.sun.enterprise.server.PELaunch
start
display
native|#] -
Applications are getting hanged up in Safari browsers
Hi,
Ours is an AJAX based application which is working in almost all the browsers and their respective versions. Of late we have been observing that our application is getting hanged up in the Safari browsers, specially in the latest versions of it. The content that we are displaying mainly contains simple HTML attributes along with respective events set for them.
However once the AJAX call is completed and after displaying the page in the browser, none of the user's events is recognized by the browser for eg: the radio buttons' clicks, drop down selections and the corresponding Javascript functionality is not working, which further leading to flow breakage in our application.
Could you please throw some light on when we come across these kind of issues and how best we can resolve them?is any increment in the speed of rendering the page in Safari browsers during the latest versions launch?
Yes. Safari 5 introduced DNS Prefetching: Safari looks up the addresses of links on webpages and can load those pages faster.
In Safari 5 this could sometimes overwhelm the router and stall the page opening.
This was fixed in Safari 5.0.2.
More details here:
http://support.apple.com/kb/TS3408?viewlocale=en_US -
Report server getting hanged frequently
Hi
Our Reports service on our Flexcube application server is always going down and this has been a case for a long time. We get errors like Unable to connect to the reports server when we try to print reports. We at times get the error Unable to connect to the reports when the reports server under OPMN is shown as ALIVE. we also have a case where the users will be able to generate reports but the status of the reportsserver will be shown as DOWN or NONE. when the reports server is down and we try to start it. at times the reports server wont start with error Exceed Max Connections Allowed OR Process (pid=21326)
failed to start a managed process after the maximum retry limit
Regards
ShwetaCurrently we are shutting it down and then restarting it, whenever it hangs, as a work around.
Please take this as a priority and suggest
regards
shweta -
Urgent: Essbase server getting hanged frequently
Hi All,
I am facing an issue with essbase server which gets hanged frequently. Following are essbase logs
Info(1051037)====Logging out user [admin]` active for 64 minutes
Info(1051164)====Received login request from [10.3.0.253]
Info(1051187)====Logging in user [admin2] from [10.3.0.253]
Please let me know how can I resolve this?Hi John,
Following are the details
What version are you running on?
11.1.1.3
Is this windows or unix?
Windows
How many total users are you licensed for?
Not sure about that
When this happens what is utilization on the ESSBASE process like?
Cache Size:
Inline image 4
Index cache setting (KB): 1024000
Index cache current value (KB): 1024000
Data file cache setting (KB): 3276800
Data cache setting (KB): 307200
Data cache current value (KB): 126053
Regards,
Hitesh -
Oracle 10G Application Server : Getting Servlet error
Hi,
When I am trying to execute the JSP after deploying the same as war file in Oracle 10G Application server, I am getting the following exception.
I am not sure why this sample jsp is not compiling and giving this classnot found exception.
Exception is:
SampleJSP: Servlet error
javax.servlet.ServletException: java.lang.ClassNotFoundException: Sample_Hello
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:323)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
This is working fine with Tomcat server when I tried to test from my Netbeans IDE.
thanksHi
I could figure out the problem. For Oracle AS, we need to include the folloiwng in web.xml file. Now every thing is working fine for me.
<servlet>
<servlet-name>jsp</servlet-name>
<servlet-class>oracle.jsp.runtimev2.JspServlet</servlet-class>
<init-param>
<param-name>check_page_scope</param-name>
<param-value>false</param-value>
</init-param>
<load-on-startup>0</load-on-startup>
</servlet>
Thanks -
Server get hang due to JDBC connections
Hello Folks,
Recently we have seen very strange problems ...
[JDK 5, Oracle db, dbcp connection pool, tomcat application server]
Suddenly Tomcat which runs our application becomes dead slow. Total number of db connections goes around 30-40. kill -3 thread dump reveals dump similar to following:
"TP-Processor3829" daemon prio=1 tid=0x6b96e2d0 nid=0x72e7 runnable [0x66f19000..0x66f1d4f0]
at oracle.jdbc.driver.T4CTTIdcb.receiveCommon(T4CTTIdcb.java:147)
at oracle.jdbc.driver.T4CTTIdcb.receive(T4CTTIdcb.java:114)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:703)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:216)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:799)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:839)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3285)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3329)
- locked <0xad5542d0> (a oracle.jdbc.driver.T4CPreparedStatement)
- locked <0xac9f8650> (a oracle.jdbc.driver.T4CConnection)
I have seen this issue has been faced by other members too http://forum.java.sun.com/thread.jspa?threadID=343023&start=15&tstart=0
But I couldn't able to fine any resolution on this problem. If you have any suggestion it will help a lot to resolve it.
regards,
bdIf that is the problem then one obvious solution would be to not spend so much time scrolling through a result set that the pool decides a timeout is in order.
-
Where does Application Server get its time information from?
Hello All,
My OS (AIX 5.2) has the correct time info. for e.g. right now, it's 09:40:24 EDT 2007
My application server console however displays GMT time on the home page. I've tried restarting the console to no avail. Has anyone run into this?
Thanks.A SCCP device will send a TimeDateReq packet to CCM and the CCM will respond with a DefineTimeDate packet which includes the current date/time and the phone can use the new time to keep in sync with CCM (ie. compensate for any drift since its previous DefineTimeDate request).
Sample snippet from CCM trace.
=====
08/07/2006 03:39:17.630 CCM|StationInit: (0000060) TimeDateReq.|
08/07/2006 03:39:17.630 CCM|StationD: (0000060) DefineTimeDate timeDateInfo=8/7/2006 3:39:17,1 systemTime=1154936357.|
=====
The interval at which a SCCP sends the TimeDateReq may vary by device type/model.
Here are a few of the known intervals/times.
Third-gen-phones (7970/61/41/etc) resync around 3:15am daily.
http://wwwin-metrics.cisco.com/cgi-bin/ddtsdisp.cgi?id=CSCsc29075&show=R-comments
Symptom:
A 7970/71, 7941/61, or 7911 that is not used for an extended period of time may show a different time compared to other 7940/60s registered to the same CallManager. It may be a few minutes behind.
Conditions:
Phone not used for an extended period of time
Workaround:
None. When the phone is taken off-hook, the date and time will be synchronized with the CallManager
Use latest phone load.
7912/05s are random.
http://wwwin-metrics.cisco.com/cgi-bin/ddtsdisp.cgi?id=CSCsd48532
7920 resyncs at 3am.
http://wwwin-metrics.cisco.com/cgi-bin/ddtsdisp.cgi?id=CSCse54674&show=fulltext
Other phones models/types may vary.
HTH
//G -
i have iphone 4 32gb. the internet and messaging and other application are working properly but while making or receiving calls it gets hanged.the model no is MC605ZA.
Have you taken the basic troubleshooting steps recommended in the User Guide?
What happened after you took those steps?
What exactly have you done thus far to troubleshoot? -
Getting Return values from RFC function call with visual basic
Hi,
I am creating a sample app to connect to a SAP system which call its RFC functions created with ABAP. It was known that the function will return more than 1 return values.
SAP Function name ==> "ZFMTP_RFC_GET_RESULT"
Export parameters (to SAP):
- Student Name [char 10] ==> "STUNAME"
- Student ID [char 20] ==> "STUID"
Return values (From SAP):
- Results [char 10] ==> "RESULT"
- Remarks [char 200] ==> "REMARKS"
i have managed to get sample codes for connecting and call a RFC function with vb but they only get a return value. How do i retrieve multiple return values like the above function "RESULT" and "REMARKS"?
Here's my vb code to accessing the function
Dim R3 As Object
Dim FBFunc As Object
Dim returnFunc As Boolean
Dim connected As Boolean
R3 = CreateObject("SAP.Functions")
R3.Connection.Client = "000"
R3.Connection.User = "BCUSER"
R3.Connection.Password = "minisap"
R3.Connection.Language = "DE"
R3.Connection.System = "dtsystem"
R3.Connection.Applicationserver = "xxx.xxx.xxx.xxx"
connected = R3.Connection.Logon(0, True)
If connected <> True Then
MsgBox("Unable to connect to SAP")
End If
FBFunc = R3.add("ZFMTP_RFC_GET_RESULT")
FBFunc.exports("STUNAME") = "Jonny"
FBFunc.exports("STUID") = "12345"
returnFunc = FBFunc.Call() <<== How do i get the return value? or RESULT and REMARKS of the RFC Function?
thanks alot.
Edited by: Eugene Tan on Mar 4, 2008 7:17 AMHi Gregor,
Thanks for the link....i am having some doubts with the codes, hope you can clarify them for me if you know the codes..
Below is the code snippet.
Set impReturn = CHPASS_FN.Imports("RETURN") <<=== is RETURN the standard keyword to get a return object?
expPassword.Value = currpass
expNewPass.Value = newpass
expFillRet.Value = "1"
''' Call change password function
If CHPASS_FN.Call = True Then
outFile.Write (", Called Function")
Message = impReturn("MESSAGE") <<==== So if i have 3 return values..i just replace with the return value variable names?
outFile.WriteLine " : " & Message
Else
outFile.Write (", Call to function failed")
End If
thanks alot...all your help is very appreciated. -
Business Intellingence Application Server installation hangs !!!
hello i am trying to install the Oracle Business intelligence 10g Server( the BI components of the AS 10g ) on a Windows XP machine.I know its not supported but no where they say you should not install it, they only say not recommended .
I successfully installed one instance on one machine, but while installing on a second one the Oracle Universal installer just froze at "java security configuration assistant", looking in the log file i found
" Start output from spawned process:
Oracle JAAS [Mon Feb 05 10:37:14 EET 2007]: invoking command:C:\BIToolsHome\ASPlus\dcm\bin\dcmctl.bat resyncInstance "
With nothing , no errors no output nothing !!
and it stayed like that for almost an hour and when i tried to stop this component's configuration also no action occured until i decided to stop the installation becasue i had no choice, i couldnt go forward i couldnt go back and i couldnt cancel either , so i forcively terminated the installation . And when i tried to uninstall , also nothing happened the installer just froze again !
i am trying now to manually complete the configuration using the other machine's log file.
I have googled for this and seen many occurences of the problem but no specific answer, if anybody could help me i'll be grateful.
ThanksHello again
this is crazy, i have tried to uninstall the instance following the instructions you gave me Keith but i couldn't , the uninstal process also froze !! can you believe that !
it stopped right at the "Deinstall Products" step of Universal installer with a message saying that i have to run "<ORALCE_HOME>\perl\5.6.1\bin\MSWin32-x86\perl.exe <ORALCE_HOME>\bin\deconfig.pl" before proceeding with the uninstallation in order to properly deconfigure the instance,and that after having this completed,i can continue.
When i ran the command i got (C:\BIToolsHome\ASPlus is my ORACLE_HOME)
C:/BIToolsHome/ASPlus/jdk/bin/java -classpath C:/BIToolsHome/ASPlus/jlib/DeconfigWrapper.jar;C:/BIToolsHome/ASPlus/jlib/ldapjclnt10.jar;C:/BIToolsHome/ASPlus/jlib/ojmisc.jar;C:/BIToolsHome/ASPlus/opmn
/lib/optic.jar;C:/BIToolsHome/ASPlus/dcm/lib/dcm.jar;C:/BIToolsHome/ASPlus/config/Queries.jar;C:/BIToolsHome/ASPlus/jdk/jre/lib/ext/sslqueries.jar oracle.ias.deconfigtool.DeconfigWrapper -o C:/BITools
Home/ASPlus -osso false
OIDhost not found in ias.properties
equired parameter OIDhost was not found in ias.properties. This means that this Oracle Home is not registered with Oracle Internet Directory. To deinstall this Oracle Home, you do not have to run this tool. Instead, you can just run Oracle Universal Installer (OUI) and select the "Deinstall" option.
so far so good, i returned to the OUI and sat their for an hour and nothing happened , it kept displaying the Remove window with the progressing bar stopped at "Synchronizing inventory" (actually the bar never moved it's always at 0)
and that's it !!
can you beat that ?!
and Michael believe me i will never install this software again -
Application are always getting hanged.
Hi,
we are using windows7 professional operating system.It is an desktop pc and particularly using for Kaspersky endpoint security 2013.
whenever we are using this desktop pc applications are getting hanged and not at all responding.Even if we click on any application like Internet explorer,Google chrome, the system is keep on rotating and sometimes it is getting re-starting automatically.
Moreover,we have tried to install Microsoft SQL server and it is keep on installing more than 1 hour.We are particularly using this pc for Kaspersky endpoint security for blocking the usb,cd-roms etc.
Please let me know the how to fix the issue and your support is highly appreciated.
Regards
Pradeep.RHi,
Have you make any change to your system before this problem occures? How about disable Kaspersky temporarilly for test?
On the other hand, please check Event Log if it identify this problem.
If problem persists, you can try to perform a Clean Boot to check whether this problem caused by 3rd program or
service start with system. Refer to the link below for more details.
http://support.microsoft.com/kb/929135
Roger Lu
TechNet Community Support -
Hi All ,
One of my application server is hanging. When I checked the OS monitor of the application server through Tcode st06, I found that the CPU utilization is very high.
There are two process which contributed to most of the CPU utilization .
Now when I checked these process through Tcode Sm50 , I found that these process are currently executing monthly report running in the background.
Please suggest me the approach to prevent application server hanging.
Thanks
GauravIt is very common that most of the customers face performance problems during monthend due to high number of batch jobs taking all system resources.
You may need to look at the available resources and plan for enhancement if required. Schedule batch jobs to off-peak hours and use dedicated servers for batch processing if ur batch job load is high. -
Application Server - Does it realy work?
We recently purchased IAS version 9.0.2. We have it running on a dual Xeon 2 Ghz machine with 4gb of Ram, and a very fast raid with WIN 2k SP4. (A pretty beefy server). We have both the infrastructure and Mid Tier on the same box. We have it running as a test environment with only 3 people hitting it (Please keep in mind ONLY 3 people)
1 - We had to apply 3 patches just to make it function properly.
2 - The Application server constantly hangs.
3 - Within portal if you want to hit an external database, you have to create synonyms for every thing you wish to use on the external database (Views, Tables, Etc.)
My points are:
1) Does Oracle Beta Test at all!?
2) Build a Self-Service Portal in Days, Not Months (Quoted from the OTN web site) - VERY Un-realistic!
3) $40,000 for this software in its current state is INEXCUSABLY!
If ANYONE at all has had 100% success/satisfaction running IAS Enterprise on a win 2k platform. PLEASE let me know. I Hope that I'm not the only one going through these problems!We currently have it running in Win2k on Dual P3 1.4GHz with 2GB of Ram with the Infrastructure and Mid-Tier on the same box. We started having problems with the Report Server hanging but still able to use the Portal, this was happening every 2-3 days. We modified the init.ora file to up the number of processes from the default to 300.
Since doing this the machine has been up and running reports for a month. :)
This has also speeded EM up by 20% not sure why but i am glad that it did.
I only wish Oracle support could have recommended this to me in response to my TAR instead of me having to mess about.
From the sound of the spec of your box you should get better performance than i get and mine is definitely acceptable. -
Oracle application server 10.1.3.1.0 install - JAVA error
Hi Everyone,
I am trying to Install Oracle Application Server 10.1.3.1.0 on 32 bit Red Hat Enterprise Linux Server release 5.8 (Tikanga)
When running the Installer, I use the -ignoreSysPrereqs option because 10.1.3.1.0 is only supported with Linux Server 4, I believe. But I know people have installed it on Linux 5.7 and 5.8
anyways, Oracle application server gets installed and asks me to run root.sh. I run root.sh and then hit the OK button to proceed,
At this point, it tries to run the configuration assistant and fails right away with the following error:
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Application Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: '/u01/app/oracle/product/10.1.3.1/jdk/bin/java -cp /u01/app/oracle/product/10.1.3.1/j2ee/home/applications/ascontrol/ascontrol/WEB-INF/lib/ascontrol.jar:/u01/app/oracle/product/10.1.3.1/j2ee/home/applications/ascontrol/ascontrol/WEB-INF/lib/log4j-core.jar:/u01/app/oracle/product/10.1.3.1/jlib/oraclepki.jar:/u01/app/oracle/product/10.1.3.1/jlib/ojmisc.jar: oracle.sysman.ias.studio.installer.ASControlConfigAssistant -sso false -j2eeinstance home -username oc4jadmin -password Protected value, not to be logged -oraclehome /u01/app/oracle/product/10.1.3.1'
Start output from spawned process:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
End output from spawned process.
Configuration assistant "Oracle Application Server Configuration Assistant" failed
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Any ideas? am i missing a library or environment variable?
ThanksI have now set the following environment variables
ORACLE_BASE
ORACLE_HOME
TNS_ADMIN
PATH
JAVA HOME
and now when I try to run opmnctl startall, I get:
opmnctl: starting opmn and all managed processes...
globalInitNLS: NLS boot file not found or invalid
-- default linked-in boot block used
main: NLS initialization failed!!
globalInitNLS: NLS boot file not found or invalid
-- default linked-in boot block used
main: NLS initialization failed!!
globalInitNLS: NLS boot file not found or invalid
-- default linked-in boot block used
main: NLS initialization failed!!
opmnctl: opmn start failed.
Maybe you are looking for
-
Whatever startup page I specify for 3.6.11, when I attempt to move to a new page (not a new tab), the new page opens as a new tab in the left third or so of the window, with the startup page occupying the rest. The startup-page tab contains no "X" to
-
Have an itunes account on a computer that is currently not working. Just installed itunes on a new laptop. Want to transfer music from near dead computer to my laptop. I can't access the 'home sharing' button on other computer - so is there a way to
-
Creation of Business Event Type
Hi We have already created a Business Event Type called Safety Refresher. Actually this training will happen every month. already created Safety Refresher and again trying to create its showing business event type already exists. Now i want under saf
-
How can I pay for skype number for one year
How can I pay for skype number for one year?
-
ISU FICA generic DS - business transaction events
Hi All, I have created an ISU - FICA generic delta DS but delta is not working for this DS. I have specified one date field as delta specific field. I tried all possible combinations for this field like calday ,timestamp but delta is not working prop