In field updates of the sbRio9606

I am looking at using an sbRio board in a deployable system however I'm not sure how I could provide updates to systems in the field.
Is it possible to perform in field updates of the sbRio9606 without having the complete NI environment installed at that site?
A simple procedure via a tool or via ftp/web page for example would be great.
many thanks for any suggestions / feedback

Hi BeeTee,
I'll try to tack on some details.
In short, you do not need the full NI development software suite on a PC to update Single-Board RIO units in the field.
Any PC with network access to the device can update the application image on the device. One tool I would recommend to this procedure is the NI Replication and Deployment Utility.
The RAD utility can take compiled system images and distrubute them on networked devices. Using this tool to upgrade images assumes that you have an identical device available in your development system to build, test, and capture the image from.
With proper software architecture, the Single-Board RIO can also be programmed to recognize when a new application update should be downloaded from a USB key. This article demonstrates a reference design for creating a Single-Board RIO system that can be updated in the field via USB memory device.
Finally, compiled applications can also be readily copied onto deployed sytems via the onboard FTP server or securely with WebDAV.
Regards,
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

Similar Messages

A field of the table in sql server db can't be updated with the db adapter

Hi all,
I am using db adapter to update data in bpel. The database is sql server.
But on the running time, i find a field which named 'JDBCT1' can't be updated. all the other fields of this table can be updated properly.
For the operation type, i have tried the update only and execute pure sql. None of them works.
The version of SOA is 11.1.1.6.
Can any one give some solutions?
It's urgent, thank you!

Hi,
Pls check the data type in your mapping file and data type in table. It might be mismatched.
thanks

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

Project Center - How to Update / Correct the URL/Link stored in the Project Name field.

In the Project Center list, the link in the "Project Name" field for some projects take you the the project details page and some display the project schedule. How can I update/correct the links to display the project schedule?

Reason for this behavior is your enterprise project template which your project manager used for creating project.
We create Enterprise project template, associate PDP , Schedule, workflow according to our need then we use these Enterprise project template for project creation.
In your case some of the project manager must have used basic template( default template) for some project, Custom Enterprise template for some project and f you are using workflow then workflow template for some project, that is why you are able to see
PDP page first for some project and Schedule page for some project.
In order to change it you can change default PDP as schedule for Enterprise project template then open project save and publish them.
kirtesh

Update of the field earliest/latest possible activity (AFVC-FRSP)

Hello Abaplers,
is their a solution for updating the field FRSP of the AFVC table, out of a report, without updating it directly via OpenSQL?.
Actually i use the BAPI: BAPI_NETWORK_MAINTAIN.
But it seems to be that the bapi has no entry in the corresponding
structure I_ACTIVITY for the FRSP field of the AFVC table.
I searched for different function modules for updating the field seperatly,
but with no result.
I will appreciate your help.
Many thanks in advance.
Alexander

thanks for your answer, i know but i think it`s usally not the way which SAP recommend.
I want to avoid it because of the risks in some cases (FK-Field updates, changeable masterdata -> inconsistency, bypassing the checks of the data element etc.).
But it seems to be that there is no other way (bapi, fm etc) and the direct update is the one and only method for updating the field?

User Defined Field that gives the date output of the last price update.

We would like to create a User Defined Field (UDF) with a Formatted Search (FMS) on the Item Master form that gives the date output of the last price update specifically the wholesale price.
Last Price Update
Pricelist 2 = Wholesale
Is this feasible?
If it is feasible what is the recommended approach?
Current working UDF on Item Master.
/* Date output is based on all the latest updates on the Item Master.*/
select max(updatedate)
from aitm
where itemcode = $[oitm.itemcode]
Resources that were helpful.
1.(Note:1165947 - Tracking Item Price Changes.)
2. Case 4-I6: Query on price updates. Mastering SQL Queries for SAP Business One By: Gordon Du

Thank you Gordon,
We are looking for the date output of the 'Last Price Update' based on 'Pricelist 2 = Wholesale' which is the challenge.
These 2 are the parameters for the date output, I should have mentioned that in my original message.
Last Price Update
Pricelist 2 = Wholesale
Per reading a bunch of other similar Forum Questions it looked like it is might not be possible to do. With there being no date on the AIT1 table and AITM.Updatedate is based on any and all updates not just last 'Last Price Update' and not sure how to use the loginstanc.
Thanks,
Vern

Fields not getting updated in the database through BAPI enhancement

Hi Experts,
I have added 4 custom fields in the transaction FB60. The fields are getting displayed in vendor line item.
I have to fill these fields from an inbound idoc which uses the BAPI_ACC_DOCUMENT_POST bapi. I have implemented the BADI BADI_ACC_DOCUMENT to pass my custom fields to the bapi and it is processing correctly by adding the custom field values to the extension table that is getting passed to the standard program of the BAPI from the BADI.
But I think, I have missed to append my fields in one of the standard structures. I have added the fields in BSEG, CI_COBL( which is getting called in BAPICOBL_CI, ACCIT).
Can anybody tell me which other standard structure I should add my custom fields so that it functions properly and gets added to the BSEG table.
Regards,
Sangeeta.

Solved on own.

Excise Part 1 updation at the time of issue.

Hi,
I am having one requirement regarding RG23 A part 1 updation at the time of issue.
1) How the register part 1 updated at the time of goods issue.
2) I purchased one material from two different vendor. One is excise unit & other is non excise.
At the time of goods issue to shop floor how the system determine that this issue is from excisable material or non excisable material.And accrdingly how will update part 1 entries.
Every time i will go to J1I5 transaction for updation of RG23 A or it will update automatically.
Regards,
Dinesh

Hi Sathish ,
In CIN - basic settings - Maintain excise groups there in that outgoing excise invoice Excise invoice during the billing and Create and post inv in single make the both fields un mark.
Hope this will make you to create invoice and excise invoice separately, or els find if any exit is used earlier.
Check and revert
Regards
Ram

The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

I updated to the new ios 7.1.1 and now my iphone 4S does not ring. It does vibrate, but even though I've checked all my settings and confirmed that it IS set to ring, it doesn't. Anyone else had this happen, and if so, found a solution?

I have tried the usual: check to be sure "do not disturb" is not activated (it isn't), checked the ringtone to be sure it did ring (it did). . . this didn't seem to happen right away after the update, for some reason -- it was initially ringing just fine. But suddenly, after a few days, it no longer does, nor do I get the tone that used to indicate when there is a message. Didn't change any settings that might have made this happen. Anyone with an idea of why and how to fix it????

Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

Fields update in "Schedule Lines for FRC sched." in a scheduling agreement

May I know how the following fields in the "Schedule Lines for FRC sched." section in a scheduling agreement are being updated?
We have already a new inbound delivery with goods receipt (last June 1, 2010) but the following fields still show the previous inbound delivery details:
For example:
Date of last del. 08.10.2009
Last d. note no. 91011
Last GR 21.10.2009
Last GR qty. 54.500
I wish I can show some screenshots here.
Thanks a lot in advance for your answers.

Hi Sravan,
As per my view point, this is standard SAP behaviour. System will generate PR only in case of external operation.
If you go to OPL8 (Order type dependent parameters) for your respective order type & plant combination you have option of maintaining setting related to PR only and there is no option of using scheduling agreement or generating schedule lines.
I don't see any possibility to use scheduling agreement using to have schedule lines for external operation.
Regards,
Tejas

HT2506 I use Preview to edit photos, and would like to know if there are any Preview updates in the works. I find there is a problem with Preview crashing, or taking a very long time to "catch up" (spinning beachball of death) while I'm editing.

I use Preview to edit photos, and would like to know if there are any updates to this program in the works. It seems Apple is constantly updating its software, except for Preview. I find it crashes all too often, and also takes forever to "catch up" with me (as in spinning beachball of death) when I'm editing a lrge amount of photos. Yes, I know I should be using Photoshop or somesuch, but it's just too **** confusing, and I don't have the time to figure it out. Thanks!!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

OIM 11g r2 User UDF fields Updation based on AD ID

Hi,
We have to update the UDF fields created for the users in OIM using the data from a table.
This table contains the AD ID, and other fields.
OIM User (already available) will be updated based on AD ID ….i;e AD ID column will be used to find the user in OIM and then his UDF will be updated based on the respective data from other columns in the table .
Please can you help me on this task?
Thanks,

Your requirement doesn't tell much like when you want to update your user. If it would be on daily basis then go for Schedule Task, if you want to at the time of provisioning then you can have one task and attach your code to bring AD ID in OIM..
You may leverage Event Handlers as well if your use case requires that.

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Not updated in the table RBKP

Hi,
I have created an append on the tables RBKP_V and RBKP.
I am parking a vendor invoice in transaction MIR7.
I'm using the BADI BADI_FDCB_SUBBAS04 to enhance MIR7 transaction. I have followed the BADI documentation.
When I click on 'Save as completed' button :
The customer fields are not updated in the table RBKP.
Whats the solution ?
Best Regards,
Ramesh.S

Hi, In my opinion, some of Custom fields should move to corresponding field in user exit to update to table.
Example . you have add a field that zzabb into vbak , you should add code like move struct-zzabb to xvbak-zzabb.
**"struct" is from screen field you be inputed

In field updates of the sbRio9606

Similar Messages

Maybe you are looking for