In IE, triple clicking will select an antire paragraph. In Firefox, double-clicking will select a word, but it stops there. Is there a way to get the IE behavior?
In IE and most Windows apps, double-click will select a word and triple click will select a paragraph. In Firefox on Windows WP, double-click selects a word, but triple click does nothing more.
Is there some way I can get Firefox to select the paragraph?
Triple-click still works for me in Firefox 6.0.2.
Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Similar Messages
-
Adobe digital editions will not finish downloading ebook even after double clicking on hard drive .
ADE will not download and open the ebook automatially. After locating the .ascm (ebook) file on the hard drive and double clicking on that, it still will not open in ADE.
I did all that and after I close the ADE and double click on the file, ADE opens right up and it looks like it is downloading (very fast), but nothing shows up in the ADE.
How do I only get emails from you and not all the other people on the discussion?
Date: Fri, 23 Dec 2011 15:48:24 -0700
From: [email protected]
To: [email protected]
Subject: Adobe digital editions will not finish downloading ebook even after double clicking on hard drive .
Re: Adobe digital editions will not finish downloading ebook even after double clicking on hard drive .
created by Jeff A Wright in Adobe Digital Editions - View the full discussion
Right click on the ACSM file or option click and go to Open With and select Other. You can then navigate to your Adobe Digital Editions and set the file to open with that. I would then recommend closing Digital Editions, if you have it open, and try double clicking the file. If Adobe Digital Editions opens then the file association is still correct. If you continue to have difficulties then I would recommend contacting the vendor you obtained the e-book from.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4101791#4101791
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4101791#4101791. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Digital Editions by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
my ipod touch will only let me enter apps by double clicking and there is now a voice which wasnt there before how do i get it back to normal does anybody know, please help ??????
Head to Settings -> General -> Accessibility and turn off VoiceOver.
See this article for more assistance.
http://support.apple.com/kb/ht3577
B-rock -
Exe that will open a file when it's double clicked in explorer.
Can you make an exe with labview 6.1 that will open a file when it's double clicked in explorer.
I want to be able to save images with my own extension, and when they are double clicked in explorer my own exe will open and process the image.It's easier in 7.0 or higher but you can do it with 6.1. Download the file at http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B123AE0CBBD5111EE034080020E74861&p_... and add this to your VI. Then you can associate a specific file extension with your app in the Windows Folder Options>File Types so that double clicking the file will start your app and pass the file name as a parameter.
-
Brand new computer with Windows 8.1 will not sync to iPod Classic 120G. Windows does not recognize anything but iPod Touch? Is there a simple solution. Diagnostics have run and failed to point to a fix.
Might be worth tearing down the whole iTunes install and starting over...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)
Let me explain:
In the clock app for ios 6.0.2 I am a little confused. It allows you to go into your music library, and create a ringtone using any songs you choose. However, I cannot find a way to remove a song from this list, just like I cannot delete one of the preset ringtones (which I'm not trying to do, but just as an example)
Thanks for your time! If you need more information just ask.
(I believe both my iPod and iTunes are up to date)I believe you just are able to delete them from iTunes.
Hope it will be helpful -
I have photos on an old 2nd generation ipod nano, that have since been wiped from any other source.
I now have a shared photostream through icloud between all my other apple deivces (iphone, ipod, ipad, macbook air, apple tv), but I cant find a way to get the ipod nano photos onto the stream. The original photo files were detroyed with an old computer, that also had the itunes library to which the nano was linked.
The photos are the only items I want from the nano. Can anyone help?You need to copy the photos off of the Nano and onto your MacBook Air first.
The photos you synced to your iPod through iTunes are no longer in their full resolution, but instead are scaled down thumbnails of those photos. So if you do manage to get them off your iPod, they will be quite small in size compared to the original ones you lost.
In order to get them off of your iPod, you'll need the help of some sort of 3rd party software. Here is one option.
http://www.macroplant.com/podtopc/
B-rock -
So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead? please i really need help
Did you try to charge it using the adapter or your computer?
If you can, let it charge for about 15min, then connect in recovery mode, described in this article:
iOS: Unable to update or restore
If still not luck, your battery might have to be replaced:
Apple - Support - Service Answer Center -
I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?
You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894) -
DVD and CD sharing will not let you play or share DVD movies and audio CD's. Does any one know of a way to get music from a CD on a MacBook Pro wirelessly to an iMac?
I cannot find the eMac install disk, and I haven't been able to get it to start up from my 10.3 CDRm (holding down option or c), though I read something somewhere about these not being able to start up from system folders earlier than those they shipped with. I've dealt with this sort of thing several times before, and it always seemed to work to simply use target disk mode.
It definitely won't start up fromt the 10.5 DVD-R, and I'm pretty sure I tried putting the MBP into TM to use its optical drive as well, but it didn't work. But it's worth trying again, and I appreciate your input greatly. -
AS it stands now, in order to use the calculator that comes with the Dashboard, you cannot read from a list of numbers in, lets say, word or excel. The dashboard is full screen and nothing can stand along side it. Is there a way to get the calculator from the dashboard to appear along with other programs? Can anyone recommend a calculator which will work as a stand alone app?
there is one, just search with spotlight "Calculator".
It works great!
Hope this helps. -
Is there a way to get the selection order for selectedProperties?
app.project.activeItem.selectedLayers seems to be ordered by the selection order, but app.project.activeItem.selectedProperties (at least in Shape Layers) seems to be ordered by the stacking order. Is there a way to get the selection order for selectedProperties?
Thank you!Hi,
i had tried to investigate this a while back and it's really hard to figure out.
The array seems to be reorganized using various rules:
At layer level : preserve the user layer selection order,
Children of indexed groups : propertyIndex ordering,
Children of named groups : some internal ordering.
The following is may be more detail than necessary, and given that it is based on observation, not official docs, it is not so reliable, but well, it might still be of interest !!
Say you have 2 selected properties A, and B, and call [COMMON PARENT] their "greatest common ancestor", that is:
A = [COMMON PARENT].property(a1).... property(aA);
B = [COMMON PARENT].property(b1).... ...property(bB);
with a1 != b1. Then:
if [COMMON PARENT] = A (ie if A is an ancestor of B), then A comes first.
For instance: if you select comp.layer(1).mask(1).maskPath, there are 2 selected properties, the mask group and its maskPath: the first is the group and the second the path (the parent comes first).
if [COMMON PARENT] is the containing composition, ie A is a property inside comp.layer(a1), and B a property inside comp.layer(b1), then A and B are ordered according to the layers selection order.
This can have some strange side effects. For instance:
deselect everything
select comp.layer(2) (and nothing else)
select comp.layer(1).transform.position
select comp.layer(2).transform.position
===> comp.selectedProperties = [comp.layer(2).transform.position, comp.layer(1).transform.position] even though the first entry was effectively selected after the second...
if [COMMON PARENT] is an indexed group, A and B are ordered by propertyIndex
For instance:
if you select comp.layer(1).mask(2), then comp.layer(1).mask(1), mask(1) appears before mask(2)
if [COMMON PARENT] is a named group, ... no clue (internal ordering).
For instance, at propertyDepth 1, it seems that Time Remapping < Effects < Masks < Material Options < Transform, etc, independantly of the selection order, and this is also not the propertyIndex ordering.
At higher depth, in CS5 the ordering seems to be the propertyIndex ordering, but it is no longer true in CC.
For instance, selected Position (index 2), Scale (index 6) and Opacity (index 11) in various order on the same layer.
in CS5 : selectedProperties = [Position, Scale, Opacity]; // propertyIndex ordering, always
in CC : selectedProperties = [Scale, Position, Opacity]; // always the same ordering, but not the propertyIndex one
So the ordering is a lexicographic ordering (Compare the ancestor of depth 0. If no difference, compare the ancestor of depth 1. If no diff, compare the ancestor at depth 2. And so forth).
But at each step, the comparaison depends on the type of the ancestor, and when the type is named group, the ordering is internal so we can't know.
Practically the most important thing is that selected properties seem to be reorganized by "containing layer" (the layer selection is preserved),
and then in each layer selected properties are "grouped by same parent": you can't have a mask related property, then an effect related property, then another mask related property:
all masks related properties appears together, all effect related properties appear together, etc.
If several effects are selected, effect(1) and all its properties appear first (if selected), then effect(2) and all its properties would appear second etc
and so forth
Xavier. -
I can't open the browser. I double click and nothing happens. I tried uninstalling and reinstalling but every time I do this it tells me I have to close Firefox first! I have restarted and then tried downloading to no avail b/c I get the same message.
Disable Yahoo Messenger (with the arrow on the right of your account name) in Yahoo mail.
-
I have an ipod touch (4th gen) and just bought a clock/charger/player. It says I need ios 4.3. I keep getting a message saying I can download ios 6.? but that it will wipe everything off my ipod. Is there any way to get the ios without wiping out my files?
There is no supported method to "downgrade" iOS on any device. If you update, you will get the latest iOS for your device, which will be iOS 6.1.3. You cannot go backwards to iOS 4.3
If you have never backed up in either iCloud or iTunes, then upgrading to iOS 6.1.3 will involve restoring your device as part of the upgrade. Without a backup to restore from, you will loose everything that is on it.
You should first connect to iTunes with your computer, sync your device without upgrading and create an up to date backup of everything. Then use the upgrade option in iTunes to update your iOS.
However, if the dock device strictly requires iOS 4.3, it will not work, as you cannot downgrade iOS. There simply is no mechanism from Apple to do that. -
hi, my itunes will not work. I get a message saying it is out of date. But I have uninstalled and reinstalled itunes and I get the same message?
When uninstalling iTunes on your windows computer, there is a specific way it must be done in order to completely uninstall all components of the software. Ensure you follow the article for your correct OS.
Did you do this when uninstalling??
Windows XP - http://support.apple.com/kb/HT1925.
Windows Vista or Windows 7 - http://support.apple.com/kb/HT1923.
Maybe you are looking for
-
New Apple id issue with downloading apps.
I have changed my email address. I have successfully changed my apple id at apple.com and icloud. The phone and my computer are syncing for such things as address and calendar. When trying to install a new app, the old email address remains and th
-
How do i get my money off my itunes and onto another itunes
i forgot my itunes security questions answers and put money on my itunes that i cant use but i have another itunes and would like too get the money off this itunes i need help
-
I want to customize the Employee appraisal in Employee self service in mySAP ERP for my client. How will i customise it according to my client's needs, like inputing the employee names, retieving data from tables, puting data to tables, setting up th
-
JSP and location of .properties file
Hi, I have a directory in my C:\apache\tomcat\webapps directory entitled "ignmDBInt". I have a jsp file in this directory that works successfully. I would like it to open a .properties file. However, it cannot be found. Where should this .properties
-
Are all the 9000 series boards the same shape/size, I am going to change a dv9689 board anyway so i was wondering what other ones would fit, maybe with better graphics (256 to 512)? I know dv9700's fit inside a dv9500, just wondered about the rest. A