In iphoto i could export direct to flickr and facebook is it possible to this in photos ?

in iphoto i could export from the application to flickr and facebook
i cant seem to do this in photos
also where is the straighten button in edit ?

Yes - using the share feature (in the top bar the rectangle with an up arrow coming out of the top)
and straighten is part of Crop in editing
LN

Similar Messages

Delete the Flickr (and Facebook) Account preference on iPhoto

How can I delete my Flickr and Facebook account information from iPhoto? I tried to delete the iPhoto .plist file and then, when I started iPhoto again it just had all configured, I then deleted the iPhoto Library and even the Application, but it does not delete the Flickr account preference when I reinstalled iPhoto, does anybody knows what to do?
Message was edited by: zppx
Sorry, my english is very poor.

If you've got an album published to flickr, click on it in your side bar of iphoto, and then click the settings button in the bottom right corner. When the window pops up, click on remove account from iphoto.
Once thats done, close the window and click settings again, and it will prompt you to link iphoto with your flickr account again - just enter in the new details and it's all done.

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

IPhoto got videos my phone doesn't and that i need. when i synchronize my photos including videos they are still not getting on my phone. i need help...

iPhoto got videos my phone doesn't and that i need. when i synchronize my photos including videos they are still not getting on my phone. i need help...

You aren't running iOS if you are using iPhoto, or a Classic operating system. Go to Apple menu -> About This Mac and find out what you really are running, and then use this link to post in the right place:
http://discussions.apple.com/docs/DOC-2463

Export Direct to DVD and Burn?

Is it possible in LR2 to export photos directly to a CD or DVD and then burn it, rather than copy all the photos to hard drive first? If not, is it possible in LR3?

Here's what is possible in LR2:
1. Select the files you want to burn to DVD.
2. Choose Export
3. Click the gray bar at the top of the dialog that probably says "Files on Disk".
4. A pop-up will appear - choose Files on CD/DVD
5. In the "Export To" pop up (under Export Location), choose Temporary Folder.
Although this still writes files to your hard drive, it will clean up once the files have been burned to CD/DVD.

When opening iPhoto 9.5.1 a dialog box appears: "A photo has been found in the iPhoto library that was not imported". "Would you like to import it?" After appearing twice iPhoto then opens normally with no changes and works OK. Why dose this happen.

Unwanted dialog box when opening iPhoto.

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. Make no other changes. Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

HT4101 Camera connector kit not working with ipad3. Not at all able to see any photo . Have tried both the USB connector directly with camera and thru card reader. Tried by copying photos to DCIM folder also.

Got a iPad camera connector kit. It is not working as expected. It is not able to read any photos. Both the USB connector and sd card reader arenot showing any photos on iPad. Tried copying all photos directly in DCIM folder. Still no result.
Any other setting needs to be changed?

Hey, thanks for your updates.
The photos are 8 character long and extension is .jpg
The file names are 8 characters long with 3 as alphapet followed by an "_" and then 4 numbers.
Initially the photos were in a folder inside DCIM folder. I manually copied them to DCIM folder, still no result.
Can you advice.

IPhoto 11 - Saving/Exporting Photos Edited in iPhoto 11

I just updated to iPhoto 11 from what I think was iPhoto 09. In my previous version of iPhoto, I would import photos from my camera, edit (crop, straighten, adjust, etc) and then I would FILE/Export photo in .jpg format to my hard drive for backup and upload to flickr.
When I follow this same procedure in in iPhoto 11, the edits that I make in iPhoto do not save to the exported photo. The application just exports the original file w/o edits.
What am I doing wrong? Is there a fix?
Thank you,
Charles

I am exporting as a JPG. I think I figured out the problem. In the old iPhoto I could export from the Edit menu. On this new version, I have click on the Photos button and go back to the screen that shows the whole event and export from there.
It's a pain and much less efficient but it seems to be working.

Moving iphoto's mobileme and facebook galley into Aperture 3

In iPhoto I have a lot of mobileme and facebook gallery that I update frequently.
I'd like to use Aperture3 also for this, but I'm unable to import these galleries.
I migrated all iphoto's library into Aperture, but on the left of Aperture mobileme and facebook galleries didn't appair...
can u help me please?

You are correct with your re-explanation
I typically have one album that I push all my family/snapshots too on Facebook, so in this case, I just deleted that album on Facebook, and restarted by creating in in Aperture, so now I am in sync. I have other albums already on Facebook that I will leave as is.
There was/is a Facebook plugin for Apeture I was using in Aperture 2:
http://www.apple.com/downloads/macosx/aperture/facebookexporterforaperture.html? cmp
I assume it will still work (32-bit only of course). It has not been updated in eons though, as you can see. This plugin simply pushed any selected photos up to Facebook, and allowed you to choose which album on Facebook. You then had the extra step of then going into your Photos section on your Facebook profile, selecting those photos, and "approving them to be published". Tedious. I actually like the Aperture 3 way better now (like in iPhoto before). The bummer of course is that you have to start from ground zero in terms of the synchronization
-gandalf44

I could export from iPhoto 6.0.0 until today. What gives?

I could export photos from iPhoto 6.0.0 until today. What gives?

I'm reading this in the iPhoto for iOS forum. You might want to post this in an iPhoto for Mac forum. When you do you might explain what you are doing, what error messages do you receive and any other things that might help users help understand your problem.

IPhoto 5 not exporting images as jpg anymore

Hi all
Yesterday I downloaded the trial version of Fireworks to be able to do some work on my web site. Previously to the download I could export images out of my iPhoto and have it displayed in my finder as .jpg . After downloading Fireworks the images are sent to finder with just the name I've given it with no .jpg. I've tried, in the export box, to change it to jpg when prompted but this doesn't work. Suddenly all the pictures I try to export are not accepted by my web site.
I tried loading the pictures to Fireworks and then saving them but again when looking in the finder under pictures there is no jpg, or any other attachment with the pictures.
I have since un-installed Fireworks and restarted m computer but the problem still exists.
Any thoughts?

Michael:
Launch Image Capture and make sure iPhoto is selected as the application to launch when you connect your camera. IC's preferences is where you make that selection. Did you run any updaters shortly before this started?
As a note if case you have iPhoto delete the memory card after the upload I suggest you do not as there have been too many cases of incomplete uploads and complete erasures. It's safer to have the camera reformat the card.

Exporting direct from FCP vs. sending to Compressor?

I've done both, but the choice ends up being a coin toss. So I'm curious if there's any accepted wisdom as to the Pros & Cons of each workflow (using the current versions of each app, and in a hypothetical All Things Being Equal scenario)?
In other words, if you were to create the exact same "Master File" from a given FCP Project using each route (in terms of the finished file's dimensions, frame rate, etc), and you selected the exact same codec/quality options to create that file (assuming the identical options exist to be chosen), would there still potentially be any significant difference between the two files? Either in terms of file size, length of time it takes for the file to be created, or any appreciable difference in image quality (despite the theoretically identical file settings)?
Because a difference in any one of those three categories might be enough to tip the scales towards using one workflow vs. the other, depending on the priorities in a given situation.
(And for the sake of this comparison, I'm leaving aside the issue of which app could still be used for other tasks while the export is in progress. Let's just assume for the sake of argument that in both cases the machine would not be being used for ANY other work during each of the exports.)
Any theories? Real-world experiences? Or has some 3rd-party test site already attempted this kind of direct comparison (using the latest versions of FCP-X and Compressor 4.x)?
Thanks,
John B
Toronto

Without considering every possibility, here are a couple of general thoughts.
Given the same Compressor preset there should be no quality difference between the output from a master fie to Compressor and sending it from the timeline to Compressor. There are speed differences and exporting from FCP X is the fastest workflow. Lately, I've found second fastest to be Send to Compressor. But the inferences differences aren't great.
Most of this depends on one's workflow preferences. The most lengthy workflow is to first export a master file and then bring that into Compressor;. Funnily enough, that is how I work because I want to have an iFrame master file that I can compress for different purposes over time.
One user recently posted that he used Send-to-Compresssor because it gave him the opportunity to pause the processes without losing his work.
In the past (particularly with legacy FCP) the Send-to-Comnpressor workflow was something I avoided. It was slow and unreliable. 10.0.x to 4.0.x was faster but troubled in other ways. The latest versions, however, seem to get it done efficiently.
Final thought: if you do your own tests, check o ensure you have similar amounts of free memory. Otherwise, it's not a "fair fight"/
Russ
edit: override the auto complete

When to use import and export directives?

I'm very confused about what the import and export language extensions do and when one should use them.
I have a Bridge application with multiple source files. As long as I don't call code in another file from the startup execution path (before all source files are loaded) and only call across modules after Bridge is running (e.g. from events in Bridge), I don't seem to need import and export. All source files seem to be in the same namespace and all can see each other's global objects/functions.
So, when would someone use import or export? And, what is the #engine that the manual discusses in relation to import and export? If some of my source files are library files that I intend to be used by multiple different files/applications, should I be using import/export for that use? Or is this only applicable when there are somehow multiple JavaScript engines involved? And when would that situation arise?
--John

John,
The import and export directives don't really matter in Bridge. All scripts execute in the same namespace. That's why namespacing your scripts is crucial in Bridge.
The #engine directive creates another JavaScript engine instance containing the script with the directive. If you then wanted to use stuff from that engine, the import and export directives would be needed. But even with that, in Bridge, the main engine will contain the script. There will just be a second engine (you can see this in the ESTK) containing the same stuff. Since it's in the main engine, there's no point in using the import and export.
Some of the other apps, GoLive, for instance, each script executes in its own engine and namespace. And import and export are needed.
This could change in future versions, and if it does, we'll be certain to make sure everyone knows about it.
Bob

Can I update iPhoto 8.1.2 directly to 9.5.1?

I was finally able to reinstall iPhoto on my iMac. However, I'm running Maverick and my iPhoto version is 8.1.2 - can I upgrade directly to 9.5.1 from the Apple store? I've been trying to download various updates to iPhoto but am unable to do so. I guess I need to know which version came after 8.1.2. I just tried 9.1.5, but it didn't work as I have the older version. Any help would be appreciated.

You do not backup your iPhoto library by exporting - you back it up by making a copy - best to simply drag to an external drive that is formatted Mac OS extended (journaled) or by having a good ongoing back using at least Time Machine and probably another daily backup
LN

Iphoto 08 image export limitation (!?)

Hi,
It used to be that you could export all your images out of iPhoto if need be. Why is it now limiting me to 60 photos at a time? And, if there's no way to do it in program, what is good work-around?
Appreciate any insight here.
Thx!

Never mind...had it set to Facebook utility instead of just files. Doh!

In iphoto i could export direct to flickr and facebook is it possible to this in photos ?

Similar Messages

Maybe you are looking for