In Lense Correction the Fujifilm X-T1 is not recognised ,only the Fujifilm x100 is listed
The Adobe rubric says that it recognizes the Fujifilm X-T1, but in Lens Ccorrection it does not list the X-T1, the only Fujifilm camera listed is the X100. As a result I cannot fully adjust my pictures to the X-T1 and its lenses
Wait! It is so new I do not see it on list. Keep checking beta ACR 8.4 to see when it is added.
Similar Messages
-
My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.
I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!
-
It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?
Hello Whitney262,
Thanks for using Apple Support Communities.
I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases. The article below will walk you through the entire process:
Download past purchases
http://support.apple.com/kb/ht2519
Take care,
Alex H. -
How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."
Hello Beckieor,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
iOS: Troubleshooting Wi-Fi networks and connections
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I have developed a batch harness whereby all scheduled tasks (W2012) invoke a common powershell script that acts as a wrapper to all our housekeeping jobs.
The first step in the wrapper is to create a Transcript file using following code
if ($Host.name -ne "Windows PowerShell ISE Host") # Transcript does not work within ISE
$timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
$path = "c:\corp\$timestamp" + "_$pid.txt"
Start-Transcript -path $path -append
As expected the folder contains files with timestamp & pid in name
08/08/2013 11:00 AM 14,388 2013-08-08-11-00-01.158_1620.txt
08/08/2013 11:00 AM 12,506 2013-08-08-11-00-01.485_936.txt
08/08/2013 11:00 AM 12,994 2013-08-08-11-00-01.735_9328.txt
08/08/2013 11:00 AM 12,024 2013-08-08-11-00-01.766_8624.txt
08/08/2013 11:00 AM 13,902 2013-08-08-11-00-01.860_1756.txt
08/08/2013 11:01 AM 15,142 2013-08-08-11-01-31.392_10120.txt
08/08/2013 05:00 AM 14,982 _1692.txt
However note the last file, it has a zero length date time value in the name
The error recorded by PowerShell is
get-date : The term 'get-date' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At C:\Corp\Powershell\DMPRun-ScheduledTask.ps1:171 char:18
+ $timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
+ ~~~~~~~~
+ CategoryInfo : ObjectNotFound: (get-date:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
IE get-date has failed and returned a zero length field as the timestamp
Can anyone think of a good reason why get-date would fail intermittently?
Do I have to code defensively for base Powershell functions?I implemented David's suggestion and now I intermittently get
import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
At D:\temp\loop_jc2_2013_11_25_08_55_02.ps1:15 char:1
+ import-module Microsoft.Powershell.Utility
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Import-Module], UnauthorizedA
ccessException
+ FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
erShell.Commands.ImportModuleCommand
I added a trap chain (My Powershell skills do not yet include recursive trap coding, any suggestions welcome)
trap {
trap {
"Trap1"
"Exception: " + $_
"Error: " + $Error[0]
"Message: " + $_.Exception.Message
"InnerException: " + $_.Exception.InnerException
"StackTrace: " + $_.Exception.StackTrace
"FailedItem: " + $_.Exception.ItemName
import-module Microsoft.Powershell.Management
import-module Microsoft.Powershell.Security
import-module Microsoft.Powershell.Utility
"Trap2"
"Exception: " + $_
"Error: " + $Error[0]
"Message: " + $_.Exception.Message
"InnerException: " + $_.Exception.InnerException
"StackTrace: " + $_.Exception.StackTrace
"FailedItem: " + $_.Exception.ItemName
import-module Microsoft.Powershell.Management
import-module Microsoft.Powershell.Security
import-module Microsoft.Powershell.Utility
import-module Microsoft.Powershell.Management
import-module Microsoft.Powershell.Security
import-module Microsoft.Powershell.Utility
trap {
"Trap3"
"Exception: " + $_
"Error: " + $Error[0]
"Message: " + $_.Exception.Message
"InnerException: " + $_.Exception.InnerException
"StackTrace: " + $_.Exception.StackTrace
"FailedItem: " + $_.Exception.ItemName
exit 1
get-date
Now I intermittently get ..
Trap2
Exception: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
Error: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
Message: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
InnerException:
StackTrace: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.Threading.Mutex.MutexTryCodeHelper.MutexTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.Mutex.CreateMutexWithGuaranteedCleanup(Boolean initiallyOwned, String name, Boolean& createdNew, SECURITY_ATTRIBUTES secAttrs)
at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew, MutexSecurity mutexSecurity)
at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew)
at System.Management.Automation.AnalysisCache.CacheExportedCommands(PSModuleInfo module, Boolean force, ExecutionContext context)
at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadUsingModulePath(PSModuleInfo parentModule, Boolean found, IEnumerable`1 modulePath, String name, SessionState ss, ImportModuleOptions options, ManifestProcessingFlags manifestProcessingFlags,
PSModuleInfo& module)
at Microsoft.PowerShell.Commands.ImportModuleCommand.ImportModule_LocallyViaName(ImportModuleOptions importModuleOptions, String name)
at Microsoft.PowerShell.Commands.ImportModuleCommand.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
FailedItem:
import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
At D:\temp\loop_jc2_2013_11_25_09_19_52.ps1:26 char:1
+ import-module Microsoft.Powershell.Security
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Import-Module], UnauthorizedA
ccessException
+ FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
erShell.Commands.ImportModuleCommand -
The tax code entered is not defined in the company code country.
Dear sap guru's
I am facing a problem while doing invoice or while cancelling the invoice or even during Subsequent Credit/Debit
Tax code V0 in procedure is invalid
Message no. FF704
Diagnosis
The tax code entered is not defined in the company code country.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system
settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax procedure has been allocated to the
company code country. The Procedure field is on the detailed screen.
2. If you need a new tax code, you can create one yourself.
For this i have checked the assignment of company code and tax code V0 in Tcode (OBCL)
In FTXP the tax code is created in country IN, for the same tax procedure and the tax is a input tax.
please suggest what could be the exact problem
Regards
SujitHi Sujit,
1.Go to FTXP and create tax code V0 for country IN and procedure ZAXINN.
2.In Txn: FV11, For the condition type- XXXX (You will get this in Txn: FTXP, against the tax type, you get the condition type OR in the PO-Item details- Invoice tab, next to field: Tax code, see the Tab-Taxes, click on it and will get the condition type) , maintain the country-IN, Tax code-V0 and the rate.
3.Also things to be checked
1> assign country to company code
2> assign company code to tax code
3> create tax code for country IN
4.Under the following menu path, pls check if you have assigned your tax code to Company Code
IMG>Logistics (General)>Tax on Goods Movement>India>Basic Settings>Determination of Excise Duty>Condition Based Excise Determination>Assign Tax Codes to Company Code
Hope it clears,
Rahul. -
The Reader Wi-Fi is not recognized by the computer or Reader software.
Solved!
Go to Solution.When this situation occurs, the Reader™ Digital Book will not appear in the software or the software may shut down when connecting the Reader Digital Book to the computer. Follow these steps to resolve this problem:
NOTE: Because each of these steps represents a possible solution to this problem, open the Reader software and connect the Reader Digital Book to the computer after completing each step.
Make sure you that you are using the Reader for PC or Reader for Mac software.
NOTE: These models are not compatible with the Reader Library software.
When you connect your Reader Digital Book to the computer, depending on your model, do the following:
PRS-T1: In the USB connected screen, make sure you tap the Data Transfer Mode icon so that your Reader goes into Data Transfer Mode.
PRS-T2: In the Do you want the computer to recognize this device screen, make sure you tap Yes so that your Reader is recognized correctly.
If the problem persists, close the software, re-open it, and then check the connection status again.
Verify that the Reader Digital Book battery has an adequate charge.
NOTE: If the battery is discharged, allow the battery to charge for at least one hour before attempting to connect the Reader Digital Book to the software.
Verify that the Reader Digital Book is turned on and is not locked.
Verify that the USB cable is properly and securely connected to the Reader Digital Book and the computer.
NOTE: The USB cable should be connected directly to the computer. Connecting the Reader Digital Book using a USB hub or extension cable is not supported.
Verify that the Reader Digital Book displays the USB connection indicator in the upper-right corner of the screen.
Remove any Memory Stick® media or SD media in the Reader Digital Book.
Disconnect any other USB Device except for your Keyboard, Mouse or Wireless USB transmitter.
With the Reader Digital Book connected to the computer, uninstall the USB driver.
After you uninstall the driver, disconnect and then reconnect the Reader Digital Book back to the computer, allow a few moments for the driver to reinstall and then check the status.
If the problem still happens, turn off your Reader digital book and do a Hard Reset.
IMPORTANT: After doing a Hard Reset, it will be necessary to authorize your unit again.
If possible, install the Reader software on a different computer and connect the Reader Digital Book to test.
The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required. -
I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favorites icons, URL field and Google search field while in full-screen mode, so it's not really full-screen anymore. How can I correct this?
== This happened ==
Every time Firefox opened
== Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards.Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
The Vendor account entered is not associated with the item you are trying to open
Hi
I moved from a Windows laptop to a Mac Book pro and moved all my files across, now I have found that two of my purchased books I can no longer open, I always get "The Vendor account entered is not associated with the item you are trying to open" message, I have the correct authorisation but they do not open, is theer a way to recover these 2 books?
Thanks in advanceThis is the Adobe Reader forum; please ask in the Digital Editions forum.
-
The e-mail account does not exist at the organization
Hi, I have a user account that people receive the following message from:
The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.
<mailserverishere #5.1.1>"
I'ved looked and this particular case could be a quirky one.
The details are:
User account A is the account that Exchange thinks doesn't exist.
User account B is her boss.
A copy of user B's email is sent to A. (done through Delivery Options)
Senders sometime receive an email back saying user A's address doesn't exist.
(which really confuses them because they sent the email to B)
This is the only time the bounce message appears.
I've removed the forward and added it again. Still the problem.
Any clues?You need to verify old delegates in UserB's mailbox by going to Tools -> Options -> Delegates. Remove old UserA and re-add it.
This is because of option “Delegates receives copy of meeting-related mails sent to me” is ticked with old UserA id in Delegates.
If you can't see any delegates then you have another option to delete delegates rule with MFCMapi.
- Open UserB's Mailbox with MFCMapi where UserB's outlook profile configured in online mode (not Cache mode)
- Double click the Mailbox of userB to open.
- Expand Root Container -> Top of the information store -> Inbox folder
- Right-click the "Inbox" folder, and then click "Display Rules Table".
- You can see all rules configured in mailbox.
- Delete the Delegate Rule with "PR_RULE_PROVIDER" column property shows "Schedule+EMS Interface". (this is the same option which you can set with GUI Delegation "Delegates receives copy of meeting-related mails sent to me" but stale copy is still in mailbox.)
THANK YOU! Amit Tank -
The tax code entered is not defined in the country for this company code
HI ALL
when we relase billing document to finance i am getting this below error
Diagnosis
The tax code entered is not defined in the country for this
company code.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the
system settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax determination procedure
is assigned to the relevant country. the Procedure
field is in the detail screen.
2. Create a new tax code if required.
Thanks & Regards
AarmanYou can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
Hope this helps.
Regards
SATYA -
The term 'Add-SPDistributedCacheServiceInstance' is not recognized as the name
Hi,
I have setup Sharepoint 2013 standalone on Windows 2012 server. I am developing an app that will make use of social apis of sharepoint 2013. Out of the box installation didnt have Distributed Cache Service running and I am not sure if its needed to be run
in order to make social apis working on the server. Anyhow, since distributed cache service was showing up as Stopped and I could not restart it, I have deleted the distributed cache service and when I retry to re-add it by entering Add-SPDistributedCacheServiceInstance
command on powershell, I get the following error,
Add-SPDistributedCacheServiceInstance : The term 'Add-SPDistributedCacheServiceInstance' is not recognized as the name
of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included,
verify that the path is correct and try again.
At line:1 char:1
+ Add-SPDistributedCacheServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Add-SPDistributedCacheServiceInstance:String) [], CommandNotFoundExcept
ion
+ FullyQualifiedErrorId : CommandNotFoundException
I am at total loss here. Any help/pointers to get around this error and setup social api working on this server will be helpful.
Regards,
UsmanThe issue is because your PowerShell console has not loaded the appropriate SharePoint DLL
in order to call the API. To resolve this, you can open the SharePoint 2010 Management Shell to execute the script or add the assembly manually before running the script.
--Cheers -
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm
PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Analy...viceApplication:
NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
+ FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it worksPS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Analy...viceApplication:
NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
+ FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works -
The ovmcore-console libraries were not found on the system!!
Hi all,
I need help to open serial console from Oracle VM Manager GUI.
I'm using the beta version 3.3 of Oracle VM Manager and the agent with Oracle VM Server 3.1 installed on a SPARC Enterprise T5240.
I created a virtual machine with the manager, but when i try to launch serial console i have the following message:
"Error 404: Page not found.
The ovmcore-console libraries were not found on the system.
Please install the correct ovmcore-console rpm suitable for your system on the Manager server.
See the Oracle VM Installation Guide for additional information."
any help ?Thank you for testing Oracle VM Manager 3.3 beta.
We are still reviewing ovmcore-console package and have not made it public yet. Meanwhile, please use the following workaround to access the VM console:
You can redirect the remote port to local using the ssh(1) command.
1) From Oracle VM Manager UI, find out the UUID of the virtual machine. For example: 0004fb0000060000e98127266687b615.
2) Log into Oracle VM server (dom0), use xm list command to get the domain id. In this example, the domain id is 2. The VNC port number will be 59xx, starting with 5900.
# xm list -l 2 |grep 59
(location 127.0.0.1:5900)
3) From your own desktop, then you can execute the command in a local shell to redirect the port to your desktop:
$ ssh -L 12345:localhost:5900 -N -f root@OVS
4) The "5900" port will be redirected to "12345" of your local desktop, so that you can run the following command to connect the guest console:
$ vncviewer local:12345
5) For Windows, you can set up an ssh tunnel by using PuTTY for example. -
when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
How do I shrink the page size of a PDF when printing?
I opened up a PDF and it opened in Preview and i need to print the page of the pdf but shrink it so it takes up 1/4 of the page and it has to be in the corner. What do I do?
-
Getting SQL Exception occurred during PL/SQL Upload instead of custom message in Web ADI excel.
I am using procedure driven WEB ADI and want to do basic validation for the same. The code for validation is: BEGIN SELECT 'X' INTO V_X FROM DUAL WHERE P_FROM_DATE IS NOT NULL AND P_TO_DATE IS NOT
-
How to get the Dynamic UI component value from JSFF page to any managedbean
HI , We have list of bean objects in jSF page we are iterating the list of bean using the forEach loop and displaying the value into Input type text (UI component) value filed . If we try to get the UI component value in Managed bean we are not getti
-
As above, was using the updated version for a short time before this happened
-
Download photo from ipad to ipad????
I want to download photo's from one ipad to ipad??????