In mail, is there a master setting for line spacing when replying?

When replying to an email, the spacing is very compressed, the reply is only one line above the original message. Is there a way to tell mail that for all replys, it should increase the line spacing between the reply and the original message? Thanks.

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Similar Messages

How do you set the line spacing when using the Append Text Table to Report VI?

I have a table of numbers which I wish to print using the report generation VI's. Since each column has a different numerical format, I first convert the number for each cell to a string with the appropriate format and then build a string array to pass to the Append Text Table to Report VI. The table is printed with double line spacing. How do I reset this for single spacing?
Attachments:
print_array.vi ‏112 KB

Dave,
The issue is not with the NI-Reports functionality, but the Array to Spreadsheet String funvtion in the for loop. Here is the context help for this function:
"Converts an array of any dimension to a table in string form, containing tabs separating column elements, a platform-dependent EOL character separating rows, and, for arrays of three or more dimensions, headers separating pages."
The thing to note here is that it says it adds an EOL (end of line) character at the end of every row. This is what is happening. Your first column of data has a \r\n in it and adds the second row to each data item. This in turn makes the rest of the columns have a larege blank space at the bottom so that all of the cell heights are equal. I w
ould re-write that little bit of code so that you just do one large string concatenation of number, spaces, number, spaces, number and this should solve your issue.
Thank you for using the Developer Zone Discussion Forums.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I've looked at that, but on my PC, "look for remote speakers connected with airtunes" isn't an option.
The only options I get are "prevent ipods [etc] from syncing automatically" , "warn me when [X %] of the data on this computer will be changed" and "forget all remotes". Its also got a list of backups I have saved, as well as a button to reset sync history.
When I am playing a song, the "airplay" button isn't even visible.
I am sure that the apple tv setting is on as well. Is there anything else you can help me with?

Creation of HR master record For a user when a time entry role is added

Hi,
Description summary:Automating creation of HR master record For a user when a time entry role is added to a user account
Description detail:When time entry role is provisioned to a user account,the HR master record is linked,It is compleated after a user is created because a user id must exist .
It is part of the record.In addition the user must be hired into SAP in order for the HR Master Record to Appear in SAP.
What we need to do is when a 'Time and Personal Data Maintainer Role "is Added by the VIRSA_ADMIN user,automate the creation of the HR Master Record.
Transaction code :SU01 to add the role to the Account.
How to Create the User Exists For this RequestIts very urgent pls help me on this.
Thanks.
Vipin

Why do you need a User Exit? You can create a BDC on PA40 & kick it off upon adding the role..
~Suresh

Is there a known issue for using IE11 when using business catalyst cms

Is there a known issue for using IE11 when using business catalyst cms? I have a client trying to update pages on her site using IE11 and the it says it updates successfully, but the new content is not saved.

I concur with Barry; I see no significant difference in using the Home button vs. the gestures. But the "fade" effect is part of iOS 7.1 and there's no way to disable it that I know of.
Regards.

TS1702 I'm trying to get youmail. It says that it's installed but there is no app for it. When I try to get an app from the app store, it says it cannot connect to itunes.

I'm trying to get youmail. It says that it's installed but there is no app for it. When I try to get an app it tells me that it cannot connect to itunes.

Yes, according to my information that was the model number for what you have. If you aren't sure then open Systemp Profiler and look for the model identifier in the display on the right. Following are the identifiers:
5,2
6,1 (this is the Late 2009; it is model number A1342)
This should provide all you need to pick the correct item.

Is there any System setting for Update statement

Is there any setting for update statement related to implicit commit because Update statement in my code behaves differently in different systems.
My code is
Data: it_eaus like eaus occurs 0 with header line,
        wa_eaus type eaus.
select * from eaus into table it_eaus where auszbeleg = '000000000001' and storausz = 'X'.
if sy-subrc = 0 .
wa_eaus-aedat = ''.
wa_eaus-aenam = ''.
wa_eaus-storausz = ''.
modify it_eaus from wa_eaus transporting aedat aenam storausz where auszbeleg = '000000000001'.
update eaus from table it_eaus.
endif.
Data: it_eausv like eausv occurs 0 with header line,
        wa_eausv type eausv.
select * from eausv into table it_eausv where auszbeleg = '000000000001' and storausz = 'X'.
if sy-subrc = 0 .
wa_eausv-aedat = ''.
wa_eausv-aenam = ''.
wa_eausv-storausz = ''.
modify it_eausv from wa_eausv transporting aedat aenam storausz where auszbeleg = '000000000001'.
update eausv from table it_eausv.
endif.

Hi
It isn't an alternative way: u can only explicit the COMMIT just as I said before:
Update DBTAB set COL.
COMMIT WORK.
Anyway just I said before the debugger can execute a COMMIT, from SAP help:
The New Debugger can run in exclusive and non-exclusive mode. Exclusive mode means that the application that is being analyzed exclusively occupies a work process of the application server during debugging. In non-exclusive mode, the Debugger functions are limited. In non-exclusive mode, after each Debugger interaction, the system requests a roll-out in the application. Therefore, an implicit database commit must be executed. This has the following consequences:
u25CF      Debugging is not possible between the statements SELECTand ENDSELECTbecause the database cursor needs to be closed when using an implicit database COMMIT statement.
In this case, program execution is terminated.
·        Debugging is not possible for conversion or field exits.
·        Due to the implicit database commit, inconsistent datasets can occur in the database.
For this reason, non-exclusive mode is not possible in productive systems.
Max

Automating creation of HR master record for a user when a time entry role

Hi Abapers,
We need an automated solution for the creation of the infotype 105 based on the addition of the time personal data maintainer role into an SAP user Account Master Record(PA30).
Is it asking to add authorisation objects which would allow the user the time data, may be it is talking about 105 as user data is maintained in 105.
For this requirement what I am going to do.Plz help me for this and how we can give authorization setting for a particular user plz send me some document.
Thanks
Sridhar.A

Hi,
You can create a BDC on PA40 & kick it off upon adding the role..
Regards

Is there a video generator for lines?

I'm still drawing circles, squares, and lines to overlay on my videos. Some time ago when I needed to make circles and squares, but didn't know how, someone here (Piero I think) told me about a great plug-in generator called Frames for just that purpose, which I installed in FCE and now use a lot (I forget the author of that wonderful program, but it appears under Video Generators > pf > Frames).
Well, now I'd like an easier way to draw lines on my videos than creating mattes and cropping them down to a sliver, or creating them in Photoshop on transparent backgrounds and then importing them into FCE as .psd files. Those methods are slow and tedious.
What I'd really like is a line generator on the order of that great pf plug-in for creating frames, only this one would be for lines. And ideally it would be able to create control points on a generated line so that you could curve and bend the line into various shapes, for example to match the twists and turns of a road on a map, or to make arcs and S-shapes. And it should have arrowheads available to put on the ends for pointing at things: arrows.
Does anyone know of any such line generator available anywhere for Final Cut Express?
Tom B.
Tom B.

That arrow generator is really nice, Ian, thanks much. That solves one of my problems; I was making arrows in Photoshop and importing them, which was tedious. But now with this generator I can quickly make any size or length arrow easily, right inside FCE. I notice that the size of the arrow after rendering is slightly smaller and thinner than it appears pre-rendered, but once you get used to that, and compensate for it a little in your design, you can make arrows of just the right size needed. Very nice!
Now if there were only a generator for curved, bent, or squiggly lines, able to be shaped as desired, for example to create a line to match the shape of a road as seen on a map, or an aerial photograph, I'd be all fixed. I don't suppose any such generator exists yet, though, so I'm still stuck with Photoshop for that, for now.
Tom B.

I have "upgraded" from Pages 2.0.2 to Pages 5.5.3 and can no longer customize my line spacing. Does anyone know if there are more than 4 options for line spacing?

Is it possible to customize line spacing in Pages 5.5.3? My previous Pages 2.0.2 allowed me to choose spacing in 0.1 increments, but as far as I can tell Pages 5.5.3 only offers four options. Very limiting for creative documents.

Hi Margaret,
Does this work for you?
And 0.6
Or 1.6
Please call back if this does not help.
Regards,
Ian.

Change Font size for Line printer when Printing ALV

We are using device type IBM 64xx LP+ emulation 1.00A to print to an IBM line printer.
I would like to change the font size of an ALV report I am sending to the device.
Can the font size be set in the Printer Initialization section of the Format?
Ex. I am using X_65_255
What/Where can I add the font size
Set to P-Series Emulation (SSCC P 0)
\0x1b\0x7c\0x7d\0x3b\0x50\0x30
Emulation Reset                               (SFCC @)
\0x01\0x40
Character Set = IBM PC, ASCII, IBM PC(0850)   (SFCC l 0 0 1)
\0x01\0x6c\0x30\0x30\0x31
Print Mode/Pitch Selection = DP Quality, 20 cpi
\0x01\0x7c\0x7d;Sxxxxx;0;0;xxx;0024;0048
Line Spacing = 6 lpi                          (SFCC 2)
\0x01\0x32
Forms Length Set = 66 lines                   (SFCC LINES;66 <CR><LF>)
\0x01LINES;66\0x0d\0x0a
Thanks,
Mike

You will find the P-series emulation here: [LinePrinter Plus programmer's reference manual|http://www.printronix.com/WorkArea/downloadasset.aspx?id=4546] (printronix doc)
You don't have many options with P-series. Maybe it's better to choose another emulation, and get the IBM 64xx programmer's guide.

Is there a "master uninstaller" for CS? (CS2 in this case)

I've got CS2, upgrading to CS4. XP SP3.
I'm currently in limbo:
* CS2 partially uninstalled
* Nothing in add/remove programs
* CS installers/uninstallers think I manually installed four CS apps and refuse to touch them
* I installed using CS and have no uninstallers
* (Plus, Adobe support has not responded to my question in a week; so much for 3-day-max turnaround)
Any ideas?
Here's what happened:
* Ran CS2 uninstaller. It wanted my CD's, which were not available at the time
* I clicked cancel...it kept going... and uninstalled some but not all CS2 apps
* When it was done, CS was gone, and some CS apps, but four remained
* No joy
Your thoughts MOST welcome! I really need to get going on CS4!

If you have deactivated everything that needs de-activating, you can use the Microsoft Installer Cleanup tool. It will remove all references in the registry to the apps you select. You can then delete the files that correspond to CS and CS2. There is a CS3 Cleanscript, it might remove parts left over from CS or CS2, but I wouldn't bet on it.
http://www.adobe.com/support/contact/cs3clean.html

Is there any other setting for "zoom in" except in the menu bar?

Every time i open a Firefox window i have zoom in the window via the menu bar (or Ctrl ++). I have to do this every time after I open a new window, or a new tab. It is annoying and tiring. How can I set the level zooming in, so that it will apply for all tabs and windows, and save it?
== This happened ==
Every time Firefox opened

Try using the Default FullZoom Level extension:
https://addons.mozilla.org/en-US/firefox/addon/6965

With Adobe Flash, the image is looking for a "zoom" setting and does not find it. The result is that the imbedded image is too large for the space allowed. Is there a zoom setting for Firefox?

When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
Below is the warning message from the Error Console

I'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
View > Zoom
If you have the orange Firefox button, tap the Alt key to display the classic menu bar.

Does anyone know if there is a setting for calendar events in notification view

It feels like that the notification view for for "at-a-glance" calendar views have regressed from ios6 to ios7 in terms of usability and convenience.
The notification center ALWAYS shows the next 6 hours of your calendar, even when it is empty and there is no way to preview individual events/appointments beyond the 6 hours. This is a waste of space and scrolling. I know how many hours there are in a day and the empty calendar really isn't useful when I have other appointments for that day that would be much more useful to preview.
I just don't understand why Apple thought it would be a good idea to take up the entire "Today" screen with six hours of empty calendar entries ALL THE TIME. With ios6 I could quickly get a glimpse of all the appointments I have for tomorrow all in one place from the notification center, before I go to bed. With ios7 I have to actually open the calendar app. This is a step backwards.
Things like this really makes the ios7 release seem premature and unfinished. Minor UI issues I can live with, but this is actually making my smartphone dumber.
For example: http://thingswrongwithios7.wordpress.com/2013/06/13/calendar-app/#attachment_7
And also All day appointments are no longer visible from the notification drop down.
See: http://forums.macrumors.com/showthread.php?t=1594792

I had the same issue last year. it turned out to be my Bluetooth earpiece reached the end of its battery life.
When I got a replacement the problem went away.

In mail, is there a master setting for line spacing when replying?

Similar Messages

Maybe you are looking for