In material master standerd cost value  not updating in group currency

hi gurus
In material master accounting 1 tab, under price and values table. standerd price is not updating in group currency.
Can you sugest me how to resolve this issue
this hapend only for one material
can you sugest me to resolve this
regards
gangadhar

Hi,
As per My Knowledge,Wht ever currency is assigned as company code currency , tht will only be updated in Material Master as Per standard.
Currect me if Iam worng.
Thanks
Goutam

Similar Messages

  • In material master standerd price field not updating in group currency

    In material master accounting 1 tab, under price and values  table. standerd price is not updating in group currency.
    Can you sugest me how to resolve this issue

    Hi,
    As per My Knowledge,Wht ever currency is assigned as company code currency , tht will only be updated in Material Master as Per standard.
    Thanks
    Goutam

  • Statistic condition values not updated during Sales order Settlement

    Hi,
    In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
    We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
    For this purpose we have created one COPA Assessment Cycle.  Tracing factor is Sales Revenue and receiver is Materials.
    In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
    For this reason we have created one new statistic condition type,  what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
    Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
    So is it possible update during sales order settlement time statistic condition values.
    Please give me suggestion.
    Regards,
    Thiru

    Hi Ajay Sir,
    As you said is correct.
    But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field.  System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
    Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
    Please suggest me is there any alternative.
    Regards,
    Thirumalesh .

  • Overhead Cost Element not update

    Hi,
    I have created Cost sheet , assigned to Production plant, for FG Material,
    Overhear updated when run SCE, and production order also updated but after settlement secondary GL a/c with Credit cost center not update. in system show no value in particular overhead
    Please help me
    Thanks & regards.
    Vinu.

    Hi Ajay,
    Yeah I have maintained  inventory valuation (Fixed and variable costs)
    overhead cost should be calculate, Fixed and variable cost so i have maintained (Fixed and variable costs)
    in cost sheet i have maintained only plan rate  not actual.is it ok ?.
    Thanks & Regards.
    Vinu,
    Edited by: vinutha1010 on Oct 25, 2010 7:37 PM

  • Split valuation for Finished Goods - Target cost was not updated

    Hi,
    We are following split valuation for 'Finished goods'.
    Valuation typte 1 is for 'manufacture' and
    Valuation type 2 is for 'External procurement'
    For production orders with this material, we are not getting target costs. It is showing zero.
    We have done release of standard cost estimate before creation of production orders and goods receipt for these orders. But still it is not updating.
    Pls guide me.
    Regards
    MadhuSekhar Gupta

    Hi,
    Thanks for your reply.
    At the time of variance calculation only the credit part of target cost will update and at the time of goods receipt debit part of the target cost will update.
    Our client has done goods receipt but debit part of the target cost was not updated. and the order status is DLV.
    I simulated the scenario in QAS by creating new finished goods materials (Industry-Construction) one is with split valuation and another is without split valuation, then the debit part of target cost was updated at the time of goods receipt and credit part was updated at the time of variance calculation for both the materials. So this problem was not arised because of split valuation.
    Was this problem arising because of the material master data, because for one material it is updating and for another it is not for the same configuration?
    Regards
    MadhuSekhar Gupta
    Edited by: gms gupta on Oct 22, 2011 3:39 PM
    Edited by: gms gupta on Oct 22, 2011 3:41 PM

  • Reg. price maintenance in material master and Costing

    Dear Experts
    I have maintained price for material in material master and costing,but when I create PO price didn't come from anywhere. Pls help me.
    Thanks
    Rajakumar.k

    Dear Rajakumar,
    The values that are maintained in the material master in costing view is considered only for costing
    purpose.
    Say while doing the cost estimate for a material using CK40N,a costing variant will be used and say For
    Eg,PPC1,for this a valuation variant will be linked ,as per this valuation variant for costing purpose the
    first priority would have been given to the planned price in the material master in costing 2 view.
    So this value will be considered only for costing purpose.
    For procurement related things you have to maintain a purchase info record for a material + vendor
    combination in ME11 and a source list in ME01.
    In the purchase info record you can maintain a price for buying the material from that vendor.
    I hope this will clear your doubts.
    Check and revert back.
    Regards
    Mangalraj.S

  • Referance material document of 103 is not updating in 105 material document

    Dear All,
    I have created a Good Receipt through MIGO using 103 movement. Later I have created 105 movement with respect to 103 movement reference through release blocked stock.
    After creation of documents, when checked the document created through 105 movement there is no reference number of 103 document number found in the document number of 105 movement.
    In the table MSEG field LFBNR is supposed to get updated with the reference number of the document created through 103 movement.
    In this case, this reference number is not updated in the table MSEG-LFBNR.
    What is the reason for Referance material document of 103 is not updating in 105 material document at item level in Purchase order Tab.
    Regards,
    Vinay

    Hi,
      I was faced this issue yesterday and finally find it caused by the check box ' Based-GR IV' in the PO.
    Twig Chan

  • Contract value not updated in open order value of credit management

    My requirement is i have created the contract and activated the credit management by assigning credit  group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
    But when i create the contract , the open order value is not updated .
    i do not want the credit to be active at order level.
    Dear guru's
    please let me know where i am going wrong
    thanks in advance

    hi,
    open sales orders value not updating currectly in sales value of CM
    http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
    i think you have to run a report which is under the link number 1.
    regards,
    balajia

  • Subscription value not updated despite payment made days ago

    Please help this is frustrating have been waiting for 3 days now payments have been made but subscription value not updated on skype account 

    Hello and welcome to the Skype Community.
    You have totally different issues. ALWAYS start your own topic please.
    1.0. Philippines Subscription.
    Your account shows that you have used your full minutes allocation in your current billing cycle and your next minutes will be added to your account when your next billing cycle starts on July 17th 2015.
    Renewing your monthly Subscription before your billing cycle ends has no effect on the date upon which your minutes allocation will be added to your account.
    To continue calling until your next minutes allocation is applied to your account please purchase either a Subscription but with a different amount of minutes or Skype Credit.
    2.0. Your account shows that you are calling a cellphone in Austria. Please note that only calls to landlines in Austria are included in the Unlimited World Subscription.

  • Material Master in more than one plant /purchasing group/Valuation Class

    Hi All,
    How to maintain a Material Master in more than one plant /purchasing group/Valuation Class......
    Points shall be awarded accordingly,
    Regards,
    Rounak

    in mm01 u can extent the material for new plant
    first creat all the views say purchasing accounting basic view etc for one plant
    the go to MM01 put same materal code and select the views purchasing and accounting
    now put the other plant number
    enter
    and put the purchasing and valuation class etc asd save
    thuis u can extend the material to other plant
    reward if usefull
    Message was edited by:
            Umakant Bhangale

  • Mock costing run not updating with recipe changes to labor and overhead

    We have made changes to the labor and overhead values assigned to a master recipe.  We are trying to determine what the new standard cost will be when we do our costing run at the end of the the month.  However,  when we do our mock costing run using CK40N it does not reflect the changes we made to the labor and overhead it still pulls in the old values.  We have tried this in our test system on several other products and it has worked for some materials but not others.  I don't think it matters but the material we are costing is a semi finished good.  Any ideas?

    Problem has been resolved.  Thank you!

  • RG1 Value not updated

    Dear All,
    We are selling the material thru Sales BoM. For the same we have maintained Item Cat Grp ERLA & LUMF in material master.
    Druing RG1 updation the Qty is getting updated but not the value for the Sub Items. Can one guide how to updated the values for Sale BoM material.
    Thanks in advance.
    Regards,
    Mahendra

    Here you are using- ERLA which means pricing carried out at main item level-
    RG1 will update the qtty from GI doc & Value from Excise Invoice ( which will flow from Invoice) -
    So, in main item level pricing - value will not get updated in RG1-
    I guess Qtty also should not get updated, as GI document will trigger only for main item, but not for subitems-
    ( because PGI will happen for only Main Item)

  • Material Master Change Pointer IDOCs not generated for Moving Avg Price GR

    No IDOC is created or distributed when the moving average price
    changes. Each time a Goods Receipt is performed, the material master
    moving average price (MBEW-VERPR) changes but the change is not
    distributed. No change pointer is created in the tables. Why?
    We need to send the moving average price each time it changes. In our
    case, each time a Inbound Delivery has been Post Goods Receipt this
    value changes for that material + plant combination and the value
    should be sent.
    The field MBEW-VERPR is included in BD52 as a field relevant for change
    pointers for the message type.
    Please advise.

    Hello,
      SAP will not generate change pointers (and no IDOCs) for Moving Average Price (MAP) changes. This is because MAP updates are not really Master Data changes and they are driven by transactions such as Goods Receipts, Revaluations etc. For these transactions, SAP will generate respective accouting documents for traceability.
    Thanks,
    Venu

  • LC value not updated

    Hi SAP Gurus,
    I have created LC in VX11N. When I am assigning the LC while creating the sale order, in the LC master, the open value is still remaining the same. It is not getting adjusted against the sale order value. Also, in the sale order LC screen part, the tab Ret. beside pmt. guarantee form is remaining at 0%. It is not getting edited. Kindly help.
    regards,
    Anant

    Hi Gaurav,
    I have put the financial document no. LC at item level only. Still the value is not getting updated in the LC.
    Also, I dont see the % in Payment guarantee option in the Payment guarantee document.
    Please help me on this.
    Regards,
    Anant

  • VALUES NOT UPDATED IN EXCISE INVOICE

    hi  gurus ,
                     well all the settings  to my knowledge are correct  for CIN customization  , but the excise values are not updated  in excise invoice .the values are 0 " . can ne1 pl help ? dts  top priority .

    Hi,
    Spro>Logistics u2013 General>Tax on Goods Movements>India>Business Transactions>Specify Which Movement Types Involve Excise Invoicesu2014here check for movt type 122 which register is maintained once appropriate register is maintained there then system will update the same.
    Or even you can try J1I5 update register with movt type 122 & enter material document (return delivery material document no) & classification IPD (Issued for clearance/Removal on payment of duty) & select the correct radio button of register. Once update the register then Extract data for excise registers Using J2I5.
    It will update both the data in the register
    Rgs

Maybe you are looking for