In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

I have checked with ISP, there response is like below:
Those are the NNI to GBNET IPs for Dominican Republic. They are Network IPs. You should be able to ping them-that means they are working.
WANRT01#show  ip route | include 192.168.20.20
B        192.168.20.200/30 [20/0] via 192.168.20.226, 02:18:29
B        192.168.20.204/30 [20/0] via 192.168.20.226, 02:18:29
Here its shows from any of our MPLS site we are able to trace the IP and it seems like, 192.168.20.204/30 is one more site but in actual its not.
INMUMWANRT01#ping 192.168.20.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.205, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/232/260 ms
INMUMWANRT01#trace              
INMUMWANRT01#traceroute 192.168.20.205
Type escape sequence to abort.
Tracing the route to 192.168.20.205
VRF info: (vrf in name/id, vrf out name/id)
  1 192.168.20.226 24 msec 24 msec 24 msec
  2 192.168.20.206 [AS 8035] 232 msec 232 msec 252 msec
  3 192.168.20.205 [AS 8035] 224 msec 224 msec *

Similar Messages

  • I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  No firewall involved.

    I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  There is no firewall inbetween the two connections, as this is all on our internal network. 
    Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
    Thanks.

    If anyone ever comes across this and has the same issue, here's what I did to fix it:
    My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only".  (I would've used N but one of the NICs in my house is too old to support it.)  Anyway, after making this change, Facetime works fine on the phone.  Hope this helps someone else!

  • We are using iPhoto '09 trying to import photos from  a memory card.  We stopped the import and ejected the card over 20 hours ago, but iPhoto says its still importing.  Any idea how long the import should run if there were 5000 photos on the card?

    We are using iPhoto '09 trying to import photos from  a memory card.  We stopped the import and ejected the card over 20 hours ago, but iPhoto says its still importing.  Any idea how long the import should run if there were 5000 photos on the card?

    Don't know how long it would take to import that many photos but if you stopped import and ejected the card ther is something else wrong here.
    I would Force Quit iPhoto. Then Restart your mac. Then restart iphoto to see if any or all of your photos were imported. If they ae you're good to go. If they were not imported I would try importing fewer photos at a time and see what happens.

  • I recently purchased the newest nano. I have 3 other nano's and iPad   iPhone, oh and iPod touch. When I plug in nano to my mac I get the message "iPod cannot update because it contains files that are used by another application. How can manage this?

    I recently purchased the newest nano. I have 3 other nano's and iPad   iPhone, oh and iPod touch. When I plug in nano to my mac I get the message "iPod cannot update because it contains files that are used by another application. How can manage this?

    dedonred wrote:
    "iPod cannot update because it contains files that are used by another application.
    It means that nano was used on a third-party software or synced from different computer to sync music. Does that nano show in iTunes? If yes, then restore completely. If not, then you may need to head to Apple Store and see what they can do.

  • Both my kids iPads are using my Apple ID if I give them both their own will they loose the existing apps they already have on their iPads?

    Both my kids iPads are using my Apple ID if I give them both their own will they loose the existing apps they already have on their iPads?

    Apps on a device are forever associated with the Apple ID that was used to purchase or download them. If the Apple ID on a device is changed the apps acquired with the original Apple ID will require that original Apple ID and password to be updated.
    My suggestion would be to erase your kids' iPads and set them up new, each with their own Apple ID. Then turn on Family Sharing with you as the Organizer. This will allow any of the Family members to share apps as long a those apps allow Family Sharing. Turn on Family Sharing in the Settings app.
    Settings > iCloud > Family

  • COPA Derivation Rules are not assigning the correct values

    COPA Derivation Rules are not assigning the correct values when we process billing documents in batch.  We currently have derivation rules defined to take the ship to country and refer to custom tables were we identify custom geographic groups (INT/DOM and EAM, AP, etc.).  The derivation rules work accurately when the billing documents are created individually, and more than 75% of them are accurate when generated in batch, but in some circumstances, it populates the derived values with the wrong field and we can not identify where or why that's happening.  It looks like it may have something to do when the ship to customer number account group is different, but that's not consistent..  Does anyone know how or where these values get populated, or have any ideas why incorrect values are appearing sporadically throughout the billing run?  Thanks!!!

    Leigh,
    Apparently the function module is changing the values for some billing docs. Check one of the following user exits, if it gets triggered and the values are changed:
    COPA0001  Enhancement for derivation in Profitability Analysis (CO-PA)
    Function Module: EXIT_SAPLKEDRCOPA_001
    COPA0002  Enhancement for valuation in Profitability Analysis (CO-PA)
    Function Module: EXIT_SAPLKEAB_001
    COPA0003  Enhancement for assignment to profitability segment (CO-PA)
    Function Module: EXIT_SAPLKEAK_001
    COPA0005  Enhancement for actual data update (CO-PA)
    Function Module: EXIT_SAPLKEII_001
    Function Module: EXIT_SAPLKEII_002
    Award suitable points if the above helps. You can also reach me at [email protected]
    Thanks
    Ajay

  • Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open

    Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open! Im very frustrated and anything would help! I have Windows 7 or Vista. Idk which

    Hello Dr.Help,
    Thank you for providing so much information about the issue you are experiencing with iTunes.  It sounds like you have tried reinstalling it, but nothing happens when you launch it.  I recommend following the steps in this article to resolve launch issues with iTunes:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • The first 7 or 8 letters of a sentence are jumbled as I type. This happens only after a period of inactivity. Short or long. I start to type and a word like 'anybody', looks like this: 'ybodyan' I have done all the normal fixes. No luck. Ideas? Thx

    The first 7 or 8 letters of a sentence are jumbled as I type. This happens only after a period of inactivity. Short or long. I start to type and a word like 'anybody', looks like this: 'ybodyan' I have done all the normal fixes. No luck. Ideas? Thx

    It's in every text-input app I use in my normal day.....most frustrating as you have to do a doublecheck especially in documents which do not have any special spellcheck system. I've done the cleanmymac, maintenance, cocktail, PRAM reset, Font Cache Smash fixes.....and still I'm dogged by this. Its almost as though the motherboard or some interface system is 'sleeping' longer than it should (if there are any input areas of the MBP which rest during short periods of inactivity) and then the initial keystrokes on the keyboard are somehow not registered and only 'kick in' once half of a new word's characters are already on the screen........grrrrr.

  • I turned on my icloud account but suddenly some of my contacts disappeared ... I tried to turn off and delete icloud account but still some of my numbers are unreachable ... Help pls

    I turned on my icloud account but suddenly some of my contacts disappeared ... I tried to turn off and delete icloud account but still some of my numbers are unreachable ... Help pls

    Hi Prince,
    OK, so you did turn on PhotoStream on your device. On iCloud.com there is no setting for PhotoStream - it is not needed. PhotoStream only get "turned on" on a device or a computer (in the computer settings - not on the website).
    So, once it is turned on, you take a picture, and it may take a few minutes before you see it in the PhotoStream on your phone. If you take a couple of pics and they don't show up, say within a half an hour, then you might want to do a reset on your phone (press the Home and Power buttons at the same time, and hold them down until the silver Apple appears - you won't lose anything by doing this....) Once it comes back up, you could try a couple more pics, or check the PhotoStream to see if the ones you took previously are there.
    Not sure about the option at the bottom of the Photo App - I think it is a permanent item (like Places - I don't use Places for my photos, but it is there all the same.
    I agree with you that it is a great backup for your photos - especially if you don't regularly sync to a computer. PhotoStream will keep up to 1000 of your photos, so it's good insurance against losing them. Just as a major user of the camera on my iPhone, I would recommend that you do back up to your computer as well. Videos are not saved in PhotoStream, so those would be lost if anything ever happened to your phone and you had not backed up to a computer....
    But don't give up on PhotoStream either - it's not only great for backing up those last 1000 photos, it is also great for sharing between devices (say, if you have an iPad).
    So, give it another try, and if you have any questions, post back!
    Cheers,
    GB

  • HT3209 If you buy a movie on the IPad in HD(720p) are you able to download in 1080p resolution? Or do you have to buy the 1080p or is there even such a thing?

    If you buy a movie on the IPad in HD(720p) are you able to download in 1080p resolution? Or do you have to buy the 1080p or is there even such a thing?

    As far as I can tell, yes. I purchased an HD movie on my old Apple TV 2 (720p) and just upgraded to the Apple TV 3 (1080p) and it displays 1080p on the info sheet and plays in that quality, so I have a feeling the same should go for you with your iPad.

  • I deleted my events in iPhoto Help?  The "events" are not in the trash.  I did download stellar phoenix recovery but not sure what to do

    i deleted my events in iPhoto Help?  The "events" are not in the trash.  I did download stellar phoenix recovery but not sure what to do

    i deleted my events in iPhoto Help?
    You deleted them in iPhoto on your Mac?
    If you do not have a backup of your iPhoto library, run the recovery program you downloaded, then reimport the folder with recovered photos into iPhoto.
    You will probably have to weed out plenty of seemingly duplicates (thumbnails, previews, and original files), since the program will not be able to reconstruct your events, only find image files.

  • PHONE 5 - switches have not changed the label of 200 euro in Turkey Newborn living in the Republic of Kosovo and no IPstore FCC ID: BCG-E2599A IC: 579C-E2599A IMEI: 013427002320018 MODEL: A1428.  YOU ARE A COMPANY AND THE CORRUPTED ...

    PHONE 5 - switches have not changed the label of 200 euro in Turkey Newborn living in the Republic of Kosovo and no IPstore FCC ID: BCG-E2599A IC: 579C-E2599A IMEI: 013427002320018 MODEL: A1428.
    YOU ARE A COMPANY AND THE CORRUPTED ...

    FCC ID: BCG-E2599A IC: 579C-E2599A IMEI: 013427002320018 MODEL: A1428.
    yes ok bot your Iphone 5 is so so bad my phone dont work  when the mobil is to low batery and off , and after dont work  dont work

  • I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?

    I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?

    Hi RadarCat16,
    Welcome to the Apple Support Communities!
    I know it can be frustrating when you are waiting for content to download to your iPhone from the iTunes Store. There are a few steps I would recommend in this situation. Please read over and follow the steps in the attached article.
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/HT1725
    If your download was interrupted using your iPhone, iPad, or iPod touch
    From the Home screen, tap the iTunes app.
    For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password if prompted.
    Tap the blue download arrow to resume.
    If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
    Have a great day,
    Joe

  • I just lost my iphone5 in a foreign country. Was not able to register it with icloud and have not installed the findmy iphone app. How can i wipe out my data remotely without these setups? Please help!

    I just lost my iphone5 in a foreign country. Was not able to  previously register it with icloud and have not installed the findmy iphone app. How can i wipe out my data remotely without these setups? Is there any good app i can use to track it? Please help!

    No, nothing you can do to track it if you did not take any measures before the loss.

  • HT4993 getting error message could not activate cellular data network when trying to access the internet without using wifi.  what do i need to do?  i have already restore the phone.

    getting error message could not activate cellular data network when trying to access the internet without using wifi.  what do i need to do?  i have already restore the phone.

    contact your phone carrier as they handle cellular network.

Maybe you are looking for

  • My HTC Droid Eris rant, maybe you can help, maybe someone with some power will read

    Alright I've got a new HTC Droid on the way, for the next 2 days I have a phone I can use the internet and check my email on, but the most basic cell phone functions I can no longer use, send/receive both calls and messages.  I'll get into the proble

  • ORA-01722: invalid number error when trying to pass a list of values

    Gurus We are using a function like so The usage for the function below is Select fn_st_bb_nm_uc ('1232131312, 123213312') from dual; SQL> / Select fn_st_bb_nm_uc ('1232131312, 123213312') from dual ERROR at line 1: ORA-01722: invalid number It's givi

  • How to setup a network setup with an airport extreme card in a mac pro

    I have installled an airport extreme card in my mac pro. Restarted the mac. The AP black triangle appears on right top of the screen. If I activate the AP than the a light grey triangle appears, with grey bars. I can create a network, than the triang

  • How to query in two tables

    Hi all How to query in two different tables? Should i use the following SET_BLOCK_PROPERTY('ins1', ONETIME_WHERE, 'serial = ''' || :GLOBAL.CODE || ''''); this is working but for one table if i want for both tables and and it display the related infor

  • Dragging One Image Onto Another

    The book, Photoshop Layers, by Kloskowski, starts the subject of Masks on p. 94 by telling the reader to open two images, then use the Move tool to drag one onto the other so that they are in the same document. A picture of what that should look like