In-Place Hold Query Based on Assigned Policy

Is it possible to create an "in-place hold" query that places a hold on all items matching an "assigned policy/personal tag?' If so, how do you do it? We have three possible assigned polices. If staff do not select a policy, their
email is purged in 90 days. If they do select a policy, it's an important message and we want to place it on an In-Place hold for the duration of the Assigned Policy.

I don't think so. The cmdlet used to create an in-place hold is New-MailboxSearch.
https://technet.microsoft.com/en-us/library/dd298064(v=exchg.150).aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

Rolling In-Place Hold & Archive Mailbox Interaction

Hello,
I've been looking at replacing existing Journaling with a combination of Exchange 2013 In-Place Hold and Archive Mailboxes, however I have a theoretical situation I've been having trouble mapping the behaviour for from the documentation available.
My theoretical configuration would be a Time Based In-Place Hold for all mailboxes for a 7 year period, with Archive Mailboxes for all users with a Retention Policy that moved all messages to the Archive Mailbox after 1 year (note; no Retention Policy to
force deletion of messages after 7 years).
In this situation I believe that a message the user reads and takes no further action on would follow the below flow:
day0: message delivered to inbox
day365: message moved to Archive Mailbox
day2555: message available for deletion
I am however unsure of the behaviour of messages the user has deleted within the first year which are in the Recoverable Items Folder at the point they should be moved to the Archive Mailbox, I would hope for the below flow:
day0: message delivered to inbox
day8: user deletes message (moved to Recoverable Items Folder on Primary Mailbox Database)
day365: message moved to Archive Mailbox (Recoverable Items Folder on Archive Database)
day2555: message purged from Recoverable Items Folder
However my concern would be based on the description of In-Place hold that all messages deleted would actually continue to be retained in the Recoverable Items Folder on the primary mailbox database and thus end up causing issues with around the Recoverable
Items Quota for the database.
I would be grateful if someone could help me straighten out the logic in this theoretical situation and help me identify if this general idea is a workable replacement for Journaling.
Many Thanks

Hello,
For recoverable items folder, we can set retemtion policy tag with action "move to achive". See more detail in the following link:
http://technet.microsoft.com/en-us/library/dd297955(v=exchg.150).aspx.
Meanwhile, In-Place Hold allows the search and preservation of messages matching query parameters. Messages are protected from deletion, modification, and tampering and can be preserved indefinitely or for a specified period. See more details in the
following link:
http://technet.microsoft.com/en-us/library/ff637980(v=exchg.150).aspx
Journaling can also help organizations respond to legal, regulatory and organizational compliance requirements by recording inbound and outbound e-mail communications. See more details in the following link:
http://technet.microsoft.com/en-us/library/aa998649(v=exchg.150).aspx
In my opinion, we can use In-place hold in place of Journaling to preserve the deleted messages.
if there's any question, feel free to let us know.
Sent By
Silver

How to implement place holder columns in data template

Hi,
I have a requirement where I have to mimic the functionality of place holder columns in RDF using Data Templates in XML Publisher.
How can I call a pl/sql function at element level when we try to group records in the data template.
To make it simple , let us say I have a requirement to retrieve the address of an employee(address line 1,address line 2, city,country)
In RDF what I do is define 4 place holder columns to capture address attributes, and in a formula column I set values to these attributes. How do I implement this in XML Publisher data template.
When I tried to implement the above requirement using test variables, I was able to execute a pl/sql function after the group tag, but not within the group tag.
I got the result for calc_values3 , but didn;t get anythng for calc_values1 and 2
Data Template:
<dataTemplate name="XXLCPAY142R" description="online payslip" defaultPackage="XXLCPAY_ONLINEPAYSLIP_PKG" version="1.0">
<parameters>
<parameter name="P_ASSIGNMENT_ACTION_ID" dataType="number" />
</parameters>
<dataQuery>
<sqlStatement name="Q_PAYMENT_RUN">
<![CDATA[
SELECT PAAPRV.assignment_action_id assignment_action_id
,PAAPRV.payroll_action_id payroll_action_id
,PAAPRV.run_assignment_action_id run_assignment_action_id
,PAAPRV.run_payroll_action_id run_payroll_action_id
,PAAPRV.person_id person_id
,PAAPRV.full_name full_name
,PAAPRV.last_name surname
,PAAPRV.assignment_id assignment_id
,PAAPRV.business_group_id business_group_id
,PAAPRV.assignment_number assignment_number
,PAAPRV.registered_employer legal_employer
,PAAPRV.abn abn
,PAAPRV.grade grade
,PAAPRV.payroll_id payroll_id
,PAAPRV.time_period_id time_period_id
,PAAPRV.period_start_date period_start_date
,PAAPRV.period_end_date period_end_date
,TO_CHAR(PAAPRV.period_start_date,'DD-Mon-YYYY') period_start_display
,TO_CHAR(PAAPRV.period_end_date,'DD-Mon-YYYY') period_end_display
,PAAPRV.period_number || ' ' || TO_CHAR(PAAPRV.period_end_date,'YYYY') period_number
,TO_CHAR(PTP.regular_payment_date,'DD-Mon-YYYY') pay_date
,PAAPRV.date_earned date_earned
,PAAF.ass_attribute2 legacy_position
,HR_GENERAL.DECODE_LOOKUP('EMPLOYEE_CATG',PAAF.employee_category) paypoint
,PPB.name salary_basis
,PAAF.people_group_id people_group_id
,PAAF.collective_agreement_id cagr_id
FROM pay_au_asg_payment_runs_v PAAPRV
,per_time_periods PTP
,per_all_assignments_f PAAF
,per_pay_bases PPB
WHERE PAAPRV.time_period_id = PTP.time_period_id
AND PAAPRV.assignment_id = PAAF.assignment_id
AND PAAF.pay_basis_id = PPB.pay_basis_id
AND PAAPRV.date_earned BETWEEN PAAF.effective_start_date AND PAAF.effective_end_date
AND PAAPRV.assignment_action_id = :P_ASSIGNMENT_ACTION_ID
]]>
</sqlStatement>
<sqlStatement name="Q_EARNINGS_DEDUCTIONS">
<![CDATA[
SELECT PAI.locking_action_id assignment_action_id_elements
     ,PRR.assignment_action_id assignment_action_id_run_ele
     ,PRR.run_result_id run_result_id
     ,PPA.effective_date effective_date_run
     ,PAAF.pay_basis_id pay_basis_id
     ,PETF.element_type_id element_type_id_ele
     ,NVL(PETF.reporting_name
     ,PETF.element_name) element_name_ear_ded
     ,PIVF.input_value_id input_value_id
     ,PEC.classification_name classification_name
     ,PRRV.result_value amount_elements
     ,DECODE( PEC.classification_name
     , 'Earnings' , 1
     ,'Pre Tax Deductions' , 2
     ,'Involuntary Deductions' , 3
     ,'Voluntary Deductions' , 3 ) sort_order_elements
     ,CASE NVL(PETF.reporting_name
     ,PETF.element_name)
     WHEN 'Salary' THEN 1
     ELSE 2
     END sort_order_name
     ,DECODE( PEC.classification_name
     ,'Earnings',1
     ,0
     ) earnings_count
     ,DECODE( PEC.classification_name
     ,'Earnings',0
     ,1
     ) deductions_count
     FROM pay_action_interlocks PAI
     ,pay_assignment_actions PAA
     ,pay_payroll_actions PPA
     ,per_all_assignments_f PAAF
     ,pay_run_results PRR
     ,pay_run_result_values PRRV
     ,pay_input_values_f PIVF
     ,pay_element_types_f PETF
     ,pay_element_classifications PEC
     WHERE PAI.locked_action_id = PAA.assignment_action_id
     AND PAA.payroll_action_id = PPA.payroll_action_id
     AND PAA.assignment_id = PAAF.assignment_id
     AND PAA.assignment_action_id = PRR.assignment_action_id
     AND PRR.run_result_id = PRRV.run_result_id
     AND PRRV.input_value_id = PIVF.input_value_id
     AND PRR.element_type_id = PETF.element_type_id
     AND PETF.classification_id = PEC.classification_id
     AND PPA.effective_date BETWEEN PAAF.effective_start_date AND PAAF.effective_end_date
     AND PPA.effective_date BETWEEN PETF.effective_start_date AND PETF.effective_end_date
     AND PPA.effective_date BETWEEN PIVF.effective_start_date AND PIVF.effective_end_date
     AND PPA.action_type IN ( 'R','Q' )
     AND PRR.status IN ('P','PA')
     AND PEC.classification_name IN ( 'Earnings'
     ,'Pre Tax Deductions'
     ,'Involuntary Deductions'
     ,'Voluntary Deductions')
     AND PIVF.name = 'Pay Value'
     AND PAI.locking_action_id = :assignment_action_id
     ORDER BY sort_order_elements ASC, sort_order_name ASC
]]>
</sqlStatement>
</dataQuery>
<dataTrigger name="beforeReport" source="XXLCPAY_ONLINEPAYSLIP_PKG.BEFORE_REPORT" />
<dataStructure>
<group name="G_PAYMENT_RUN" source="Q_PAYMENT_RUN">
<element name="assignment_action_id" value="assignment_action_id"/>
<element name="payroll_action_id" value="payroll_action_id"/>
<element name="run_assignment_action_id" value="run_assignment_action_id"/>
<element name="run_payroll_action_id" value="run_payroll_action_id"/>
<element name="person_id" value="person_id"/>
<element name="full_name" value="full_name"/>
<element name="surname" value="surname"/>
<element name="assignment_id" value="assignment_id"/>
<element name="business_group_id" value="business_group_id"/>
<element name="assignment_number" value="assignment_number"/>
<element name="legal_employer" value="legal_employer"/>
<element name="abn" value="abn"/>
<element name="grade" value="grade"/>
<element name="payroll_id" value="payroll_id"/>
<element name="time_period_id" value="time_period_id"/>
<element name="period_start_date" value="period_start_date"/>
<element name="period_end_date" value="period_end_date"/>
<element name="period_start_display" value="period_start_display"/>
<element name="period_end_display" value="period_end_display"/>
<element name="period_number" value="period_number"/>
<element name="pay_date" value="pay_date"/>
<element name="date_earned" value="date_earned"/>
<element name="legacy_position" value="legacy_position"/>
<element name="paypoint" value="paypoint"/>
<element name="salary_basis" value="salary_basis"/>
<element name="people_group_id" value="people_group_id"/>
<element name="cagr_id" value="cagr_id"/>
<group name="G_EARNINGS_DEDUCTIONS" source="Q_EARNINGS_DEDUCTIONS">
<element name="assignment_action_id_elements" value="assignment_action_id_elements"/>
<element name="assignment_action_id_run_ele" value="assignment_action_id_run_ele"/>
<element name="run_result_id" value="run_result_id"/>
<element name="effective_date_run" value="effective_date_run"/>
<element name="pay_basis_id" value="pay_basis_id"/>
<element name="element_type_id" value="element_type_id"/>
<element name="element_name_ear_ded" value="element_name_ear_ded"/>
<element name="input_value_id" value="input_value_id"/>
<element name="classification_name" value="classification_name"/>
<element name="amount_elements" value="amount_elements"/>
<element name="sort_order_elements" value="sort_order_elements"/>
<element name="sort_order_name " value="sort_order_name "/>
<element name="earnings_count" value="earnings_count"/>
<element name="deductions_count" value="deductions_count"/>
<element name="calc_values" value="XXLCPAY_ONLINEPAYSLIP_PKG.CALC_VALUES(67772)"/>
<element name="calc_values1" value="XXLCPAY_ONLINEPAYSLIP_PKG.RETURN_TEST"/>
<element name="calc_values2" dataType="number" value="XXLCPAY_ONLINEPAYSLIP_PKG.P_TEST" function="XXLCPAY_ONLINEPAYSLIP_PKG.P_TEST"/>
</group>
</group>
<element name="calc_values3" dataType="number" value="XXLCPAY_ONLINEPAYSLIP_PKG.P_TEST"/>
</dataStructure>
</dataTemplate>
CREATE OR REPLACE PACKAGE XXLCPAY_ONLINEPAYSLIP_PKG
AS
P_TEST NUMBER;
P_ASSIGNMENT_ACTION_ID NUMBER;
FUNCTION BEFORE_REPORT RETURN BOOLEAN;
FUNCTION RETURN_TEST RETURN NUMBER;
FUNCTION RETURN_TEST1 RETURN NUMBER;
FUNCTION RETURN_TEST2 RETURN NUMBER;
FUNCTION CALC_VALUES(element_type_id number) RETURN NUMBER;
END XXLCPAY_ONLINEPAYSLIP_PKG;
CREATE OR REPLACE PACKAGE BODY XXLCPAY_ONLINEPAYSLIP_PKG
AS
P_TEST1 NUMBER;
P_TEST2 NUMBER;
FUNCTION BEFORE_REPORT RETURN BOOLEAN
IS
BEGIN
P_TEST := 2;
FND_FILE.PUT_LINE(FND_FILE.LOG,'From Before Report');
RETURN(TRUE);
END BEFORE_REPORT;
FUNCTION RETURN_TEST RETURN NUMBER
IS
BEGIN
FND_FILE.PUT_LINE(FND_FILE.LOG,'Call 1');
RETURN(P_TEST);
END RETURN_TEST;
FUNCTION CALC_VALUES(element_type_id number) RETURN NUMBER
IS
BEGIN
FND_FILE.PUT_LINE(FND_FILE.LOG,'Call 2');
p_test1 := null;
p_test2 := null;
if ( element_type_id = 67772 ) then
P_TEST1 := 5;
P_TEST2 := 7;
elsif (element_type_id = 67804 ) then
P_TEST1 := 9;
P_TEST2 := 11;
end if;
RETURN(1);
END CALC_VALUES;
FUNCTION RETURN_TEST1 RETURN NUMBER
IS
BEGIN
RETURN(P_TEST1);
END RETURN_TEST1;
FUNCTION RETURN_TEST2 RETURN NUMBER
IS
BEGIN
RETURN(P_TEST2);
END RETURN_TEST2;
END XXLCPAY_ONLINEPAYSLIP_PKG;
/

For this, you need to have a master query and child query.
1) In your master query you will have to identify one unique column and call a pl/sql pkg function which calculates all values for your place holder columns and inserts rows into a pl/sql table with the index as your unique column
ex: Master query returns
empnum name amount
1 scott 250
2 bob 350
and your calculated value is 10 percent of the amount
your pl/sql pkg should insert records into the pl/sql table like r(1):= 250*0.1 = 25 r(2):= 350*0.1 = 35
2) The child query will get executed for each row of you rmaster query, so you should be able to read the values based on which master records row it is executing for
Please bear in mind that you have to make sure that the report is not executed by two different people at the same time, else you have to consider session or any other unique identifier in addition to your master records unique identifier.
Cheers,
Girish.

Change the source of place holder dynamically in report

Hi,
We need to assign values to place holder dynamically in report pages based on the page number.
Basic requirement is to have dynamic images (generated in before report trigger with file name having timestamp and page number) in dynamic pages (getting repeated based on number of lines in the report).
Is there any way we can have a place holder mapped to this field (Read from file, type: Image) and change the source dynamically when each page is formatted?
Any pointers for this will be helpful.
Thanks,
Ayyappa

Hi,
We need to assign values to place holder dynamically in report pages based on the page number.
Basic requirement is to have dynamic images (generated in before report trigger with file name having timestamp and page number) in dynamic pages (getting repeated based on number of lines in the report).
Is there any way we can have a place holder mapped to this field (Read from file, type: Image) and change the source dynamically when each page is formatted?
Any pointers for this will be helpful.
Thanks,
Ayyappa

Access to Query based on characterstic as infoprovider

Hi All,
is there any special access to be given for roles having worbooks, whose queries are based on characterstic (as infoprovider)
i have a characterstic (as data target ) assigned to an infoarea, and i have reporting role that gives access to this info area.
user can access other reports based on cubes / multiprovider in the same infoarea, where as they can't access this query based on charaterstic info provider.
and this characterstic is not authorization relevant.
Best Regards
Robyn

Hi Vikram,
Still the same, no authorization.
is there any place we can look like SU53 for BEx access.
Best Regards
Robyn.

In-place archive and in-place hold

Hello,
I have a question concerning the archiving of the Recoverable items folder.
The question refers to Exchange 2013 SP1 and in-place archive in coherency with in-place hold.
First of all I have an active in-place archive with the default retention policy.
Futhermore a Time-based In-Place Hold is enabled.
So if I hard delete a item its moves to the DiscoveryHolds folder, by reason of the in-place hold.
As the "DiscoveryHolds" Folder is a subfolder of the "recoverable items", will the hard-deleted email be moved to the users in-place archive according to the Retentiontag of the "recoverable items" folder?
If not, is there any possibility to ensure that hard-deleted items which are being kept in the database by in-place hold are being moved to the archive? We want to assure that items, which are being deleted by the user, do not remain in the
users active mailbox, but are being moved to the archive mailbox DiscoveryHolds folder to keep the active mailbox database "tidy".
Thanks!

Hi,
If set a retention policy for recoverable items folder, then the In-Place Hold will not prevent the items being moved from the primary mailbox's recoverable items folder to archive mailbox's.
Here is a related thread for your reference.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/635c9357-d0f1-4de6-b8f4-5f78867d2f19/rolling-inplace-hold-archive-mailbox-interaction?forum=exchangesvradmin
More information for your reference.
http://technet.microsoft.com/en-gb/library/ee364755(v=exchg.150).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2013 In Place Hold with In Place Archiving

I'd like to use in place hold to ensure all data is kept for 5 years rolling but still use in place archiving for all data over 1 year old.
Is this possible without all data between 1 and 5 years old being held both in the recoverable items folder of the primary mailbox as well as in the archive mailbox?

Hi,
Based on your description, you want to use In-Place Hold to keep data for 5 years and use retention policy to move messages older than 1 year to archive mailbox.
If you have mails older than 1 year, then they will be moved to archive mailbox and In-Place Hold will not prevent the items being moved from the primary mailbox to archive mailbox. These won't go to the recoverable items folder in the primary mailbox.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

In-Place Hold Combined with In-Place Archiving in Exchange 2013

Hi,
In-Place Hold is enabled for a mailbox and set to keep everything indefinitely. The same mailbox has a Retention Policy with a Default Policy Tag set to move everything to an archive mailbox after 2 years.
Let's say the user keeps mail in the primary mailbox and 2 years passes. This piece of mail should then be moved to the archive mailbox. When this happens, does the indefinite In-Place Hold mean that the mail is ALSO kept in the primary mailbox
(in the Recoverable Items Folder)?
Or is the In-Place Hold smart enough to consider both the primary and archive mailbox as a single "whole" and would therefore completely purge the mail from the primary mailbox when it is moved to the archive?
Obviously I would expect if the user were to subsequently delete the mail from the archive mailbox that In-Place Hold would actually keep the mail in the Recoverable Items Folder in the archive mailbox.
I am essentially trying to determine if In-Place Hold effectively nullifies any space saving in the primary mailbox when mail is archived or whether the two mailboxes are treated as a single "whole" for the purpose of the hold.
Cheers,
David

Hi,
Thanks for the reply. If that is the case, doesn't that effectively mean that when In-Place Hold is active, any In-Place Archive process actually ends up creating a second copy of the mail and therefore using twice as much space?
One copy in the Archive mailbox and one copy kept in the Recoverable Items Folder (due to the In-Place Hold) in the Primary mailbox.
My feeling is that Microsoft would have been smart enough to get this right and Exchange will actually bypass the In-Place Hold functionality in the specific case when the mail is being moved to the Archive - but this is just a guess. I'd like to know
for sure.
Cheers,
David

Error while creating place holder definition in Site Studio using Jdev,UCM

Hi,
I am Using UCM and Jdev 11g.
I was creating a website using Oracle® Fusion Middleware Developer's Guide for Site Studio for External Applications
11g Release 1 (11.1.1).
It worked fine till step 9 of 4.2 i.e i created till region template.
But as i was creating place holder definition, i was trying to add region definition.
This was the step where i got the error :
Unable to retrieve search results. Error occurred while retrying the search query. Error occurred while processing. Unable to return results.
Because of this i am not able to see any region definitions which i had created earlier. so i am not able to add any region definition to it.
Please help me resolve this.

HI Srinath,
Thanks for the response.
Please let me know how to addsystemdatabase tracing section on UCM .
PFB the error which is coming in Jdev.
oracle.stellent.ridc.protocol.ServiceException: Unable to retrieve search results. Error occurred while processing. Unable to return results. Unable to create the result set for query 'SELECT Revisions.dID, dDocTitle, dDocType, dRevisionID, dSecurityGroup, dDocAuthor, dDocAccount, dRevLabel, dFormat, dOriginalName, dExtension, dWebExtension, dInDate, dOutDate, dCreateDate, dPublishType, dRendition1, dRendition2, dFileSize AS VaultFileSize, DocMeta.*, RevClasses.*
          FROM Revisions, DocMeta, Documents, RevClasses
          WHERE Revisions.dID=DocMeta.dID And Revisions.dID=Documents.dID And Revisions.dDocName = RevClasses.dDocName And dIsPrimary = 1 And dReleaseState IN ('Y', 'U', 'I') AND (((((((( xWebsiteObjectType LIKE '%Placeholder Definition%' ) AND ((( CONTAINS(xWebsites, 'SiteStudioDemo')> 0 ))))))))) AND ((((dSecurityGroup != 'SG_MO_Op' OR dSecurityGroup IS NULL))))) ORDER BY dInDate Desc'. ORA-00904: "CONTAINS": invalid identifier
java.sql.SQLSyntaxErrorException: ORA-00904: "CONTAINS": invalid identifier.
     at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:135)
     at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:107)
     at oracle.stellent.wcm.core.idc.AbstractIdcApi.getResponseBinder(AbstractIdcApi.java:254)
     at oracle.stellent.wcm.core.idc.impl.SiteStudioApi.search(SiteStudioApi.java:216)
     at oracle.stellent.wcm.jdev.cis.PluginSiteStudioApi$1.run(PluginSiteStudioApi.java:127)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619)

How to build a query based on(UNION) 3 vendor InfoObject

Dear Experts:
I have a requirement to build one query based on 3 vendor InfoObjct: 0VENDOR + 0VEN_COMPC + 0VEN_PURORG.
I tried to build a multiprovider upon these 3 infoobjects, but when I Identify(Assign) the key for each InfoObject, supposely there should be 3 InfoObject for me to check (0VENDOR, 0VEN_COMPC and 0VEN_PURORG) so that I can UNION these 3 infoobjects together on vendor number. But since the reference infoobject of these 3 vendor master data is different, I can not check the 3 together.
Can anybody let me know how to build that query? I only need vendor number show once, and the attributes of 0VEN_COMPC and 0VEN_PURORG can be union to 0vENDOR.
Any post would be appreciated and thank you all in advance!
Best Regards!
Tim

Hi,
you can create a link between the vendor objects itself, means link 0vendor with 0ven_compc and 0ven_purorg. This should give you a list of all vendors multiplied with the comp codes multiplied with the purch. org. May be here it is possible to create another link between a attribute (eg. comp_code of 0ven_purorg with comp_code of 0ven_compc). In case it is not possible you need to add this link information somehow. Another option might be to create 2 queries. One on a infoset of 0vendor and 0ven_purorg and another one on 0vendor and 0ven_compc.
regards
Siggi

Creating Infoset query based on ABAP program

Hello
I have 3 tables FEBEP, BKPF and BSEG and I need to join the 3 tables based on:
FEBEP-MANDT = BKPF-MANDT = BSEG-MANDT
FEBEP-NBBLN = BKPF-BELNR = BSEG-AUGBL
FEBEP-GJAHR = BKPF-GJAHR = BSEG-GJAHR
Then I have a few view fields from all the 3 tables. After this I can build an infoset query based on structure + ABAP program, and a generic datasource on top of it.
Can someone give me the ABAP code to be written SE38? Also should I select integrated program/external program in the infoset query?
Thanks,
Srini.

Hi,
Even if you create an ABAP program for infoset, you will writing a SELECT statement from BSEG table which is quite huge.
And you will putting JOIN with other tables.
Performance wise this is not advisble.
Why do not try the following other tables and check if the fields you need are available?
You can't join BSEG as it is a Cluster Table.In the place of BSEG you can use:
Account Recivables data use BSID and BSAD tables
GL Account Related data use BSIS and BSAS tables
Account payables data use BSIK and BSAK tables
Thanks.

Query based collections SCCM 2012 R2

Hi to everyone. Is there any book or other material needed to master process of creating query-based collections? It is done using WQL not T-SQL so it is a little bit tricky, not only syntax itself but also classes where particular information useful to
create custom query-based collection can be found. I used WQL before only to create WMI filters for some GPOs in order to narrow their scope e.g. only to Windows 7 workstations in domain. These WMI filters were usually created
with one short WQL line, it was very simple WQL query. Bare in mind all classes that exist in SCCM database googling can be useful to solve some problems but it would be better to have some book and to master creation of query-based
collections.

Hi,
You could review the file smsprov.log.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Need a script to enable in-place hold on Office 365

Hello, I need a script to enable in-place hold on Office 365 for my users.
The options that I have found for this so far is to enable in-place hold for a DL or an individual user. Is there a way to use a CSV instead?
This is what I have used before.....where "allstaff" is the name of a DL.
New-MailboxSearch -name "3 Year In-Place Hold" -SourceMailboxes allstaff -InPlaceHoldEnabled $true -ItemHoldPeriod 1095

That doesn't seem to work.........I think it's trying to create a new hold query for every user.
PS C:\scripts> ./user_hold.ps1
WARNING: The hold setting may take up to 60 minutes to take effect.
Name CreatedBy InPlaceHoldEnabled Status
3 Year In-Place ... S-1-5-21-2495351... True NotStarted
Unable to execute the task. Reason: A mailbox search named <3 Year In-Place Hol
d> already exists or is currently being deleted. Please choose a different name
+ CategoryInfo : InvalidArgument: (Microsoft.Excha...DiscoverySea
rch:MailboxDiscoverySearch) [], MailboxSearchTaskException
+ FullyQualifiedErrorId : [Server=BLUPR06MB097,RequestId=e8df9b95-2e00-428
d-813f-da05ea8d09d4,TimeStamp=11/5/2013 9:38:05 PM] [FailureCategory=Cmdle
t-MailboxSearchTaskException] 95CD9ECA
So my next question...........how do I add users to an existing In-Place hold?

Place Holder values are not displaying when calling the report

Hi,
I have a Place holder column in my report and i am assigning the values in a formula column. When i run the report from report builder place holder column is showing the value. But when i deploy the same in application server and i try to invoke from a form it is not the value of that place holder column. Why is this happening? Please, help me in resolving the same.
Thanks & Rgds,
M T

Yes Gayatri. You are right. When i run the report from report builder it is working perfectly. The same report i deployed in application server and invoking from a form report is not showing the values for place holder columns.
Why is this happening?
How to resolve it?

Can use place holder (?)in select statement.

Is it possible to have have a place holder in my select clause or it is possible to have only in where clause?
Please find the below query I am having place holder in select statement emp_id=? nit it is throwing an error for me.
select * from(select myrows.*, rownum rn from(select acc as account, es as identity,address as street_address
state as stae,select id from mytable where emp_id=? as my site from myview
where ert_id=? and chek=?
I am getting an error ORA-00936:     missing expression is it possible to have a place holder in select statement
Please help me on this.
Regards,
BA

user575682 wrote:
Is it possible to have have a place holder in my select clause or it is possible to have only in where clause?
Please find the below query I am having place holder in select statement emp_id=? nit it is throwing an error for me.
select * from(select myrows.*, rownum rn from(select acc as account, es as identity,address as street_address
state as stae,select id from mytable where emp_id=? as my site from myview
where ert_id=? and chek=?
I am getting an error ORA-00936:     missing expression is it possible to have a place holder in select statement
Please help me on this.
Regards,
BAfor clarity and easy to be read i attempted to rearrranged your code and this is what it will look like:
select *
from (select myrows.*, rownum rn
          from (select acc as account,
                       es as identity,
                       address as street_address
                       state as stae,
                       select id
                  from mytable
                 where emp_id = ? as my site from myview where ert_id=? and chek=?apparently the syntax is not correct and by that you are missing some comma in your column, ? question mark symbol will not be recognize, and some ')' closed parenthesis.
are you using a report builder that you want to use a placeholder column?

In-Place Hold Query Based on Assigned Policy

Similar Messages

Maybe you are looking for