In R12 Invoice Register Concurrent Request running long time
Hi
In R12, Invoice Register Concurrent Program Running more than 30 mins , before its use to finish with in 10 mins, any suggestions.
Thanks
I don't wanna hear sorry from gurus,Thanks. By the way, I do not consider myself a guru, just a simple guy who is still learning new things everyday and at the same time like to share what he knows :)
Sawwan, I checekd locks there iare no locksWell, in this case I would suggest you wait for the request to complete. Once it is done, bounce the application as well as the database and run the request again (if possible) after enabling trace and see if takes that long to complete.
If the request keeps running (i.e. does not seem to complete), then cancel the request, kill all associated process from the backend, and follow the action plan above (bounce, and enable trace).
Similar Messages
-
Select query running long time
Hi,
DB version : 10g
platform : sunos
My select sql query running long time (more than 20hrs) .Still running .
Is there any way to find sql query completion time approximately. (Pending time)
Also is there any possibilities to increase the speed of sql query (already running) like adding hints.
Please help me on this .
ThanksHi Sathish thanks for your reply,
I have already checked in V$SESSION_LONGOPS .But it's showing TIME_REMAINING -->0
select TOTALWORK,SOFAR,START_TIME,TIME_REMAINING from V$SESSION_LONGOPS where SID='10'
TOTALWORK SOFAR START_TIME TIME_REMAINING
1099759 1099759 27-JAN-11 0Any idea ?
Thanks. -
Is index range scan the reason for query running long time
I would like to know whether index range scan is the reason for the query running long time. Below is the explain plan. If so, how to optimise it? Please help
Operation Object COST CARDINALITY BYTES
SELECT STATEMENT () 413 1000 265000
COUNT (STOPKEY)
FILTER ()
TABLE ACCESS (BY INDEX ROWID) ORDERS 413 58720 15560800
INDEX (RANGE SCAN) IDX_SERV_PROV_ID 13 411709
TABLE ACCESS (BY INDEX ROWID) ADDRESSES 2 1 14
INDEX (UNIQUE SCAN) SYS_C004605 1 1
TABLE ACCESS (BY INDEX ROWID) ADDRESSES 2 1 14
INDEX (UNIQUE SCAN) SYS_C004605 1 1
TABLE ACCESS (BY INDEX ROWID) ADDRESSES 2 1 14
INDEX (UNIQUE SCAN) SYS_C004605 1 1The index range scan means that the optimiser has determined that it is better to read the index rather than perform a full table scan. So in answer to your question - quite possibly but the alternative might take even longer!
The best thing to do is to review your query and check that you need every table included in the query and that you are accessing the tables via the best route. For example if you can access a table via primary key index that would be better than using a non-unique index. But the best way of reducing the time the query takes to run is to give it less tables (and indexes) to read.
John Seaman
http://www.asktheoracle.net -
In r12 Custom Concurrent Requet taking long time
All
One of User running Custom Concurrent Request
User saying slow running process which probably is going to run for more than 6 hours.he don't want to terminate request
when user had done bulk loads in PROD on weekend the performance was much better. . Do we know what they are? Are they contributing to slow performance on the production box?
when i checked in OAM
Phase Running
Status Normal
Request ID XXXXXXX
Diagnostics This request is currently processing normally. Processing began on 02-APR-2008 13:12:03. No action required. You may examine the request log to determine its processing status.
Run times
Average 1253
Minimum 0
Maximum 14019
Estimated Completion 02-Apr-2008 13:32:56
what could be the reasons to perform slow processSo, reviewing:
1) Bulk data load took place over the weekend.
2) Custom code performs poorly after bulk load.
3) All database tables analyzed recently.
Looks like you have an adventure on your hands. :-)
No magic quick-fix here...you'll need to either review your custom code for any obvious performance bottlenecks, or trace the database session to determine where it is slowing down. Unless you're personally very familiar with the custom code, running a trace is probably a faster way to pinpoint the problem.
Good luck! In this case, at least, you're fortunate that it is custom code...if the problem is in the code itself, you have the freedom to change it, unlike the Oracle-delivered code. :-)
Regards,
John P. -
R12 Restrict Parallel Concurrent Requests Per User to a Limit.
Hi everyone,
Is it possible to restrict parallel concurrent requests per user to a limit.
e.g. UserA sending concurrent requests to submit 15 heavy reports one after another. After 2 minutes he feels free. Now 15 reports running in parallel are heavy enough to take system's performance down. Is there a way to restricting parallal reports by a single user to 5.
Waitning........
Regrads,
M. Farooq Khan.Hi,
Please check the profile optiion
Concurrent:Active Request Limit
Thanks, -
Concurrent Program Takes Long Time to complete
Hi every body,
Normally concurrent i will takes 5 min time to complete.But some time same concurrent program takes more than 30 min's to complete.
How to troubleshoot in that senario.
Thanks in Advance
With Regards
Gogineni'S
Edited by: Gogineni Surendra on Dec 10, 2009 11:40 PM
Edited by: GogineniS on Dec 11, 2009 11:46 PMHi;
Please follow those link and see its helpful:
tune concurrent manager
Oracle apps database
Also check:
Concurrent Manager very slow........
Concurrent Request very slow
Re: Concurrent Program "Running" for a long time
How to Run the Purge Concurrent Request and/or Manager Data Program and Which Tables Does it Purge? [ID 154850.1]
How to Optimize the Process of Running Purge Concurrent Request and/or Manager Data (FNDCPPUR) [ID 92333.1]
Purge Concurrent Request and/or Manager Data Slow Performance [ID 789698.1]
Regard
Helios -
Releasing transport request taking long time
Hi All,
I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
In SM50, i didn't find any processes running.
Can anyone tell me the solution.
Thanks & Regards
UdayHi Uday,
>> I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
You didn't note what release your are running on, but you can check the note 1541334 - Database connect takes two minutes
>> In SM50, i didn't find any processes running.
It is normal, because the system exports the transport request by "tp" command at the OS level, after TMS complete its job on a DIALOG wp.
Best regards,
Orkun Gedik -
Concurrent request taking more time than usual
HI,
I am running a concurrent request : Payables transfer to general Ledger
which was usually getting completed within 5 minutes....but now it is taking hours to complete....Log file not showing any errors as such...
I increased the standard mangers processes and bounce the Concurrent managers n Database as well...i also ran cmclean.sql, but no luck..
Can anybody suggest me the approach for this problem...
thanks n regards,
SajadCheck the enable trace option in the concurrent program definitions.
After that run the concurrent request and get the trace file in udump directory and tkprof it, and analyze which is the query that is causing the issue. -
Concurrent report takes long time to complete
Dear all,
Concurrent report "Inactive items report" takes long time to complete.
How to solve this performance issue ?
Kindly offer me solution to this.
Regards,
ArunPlease post the details of the application release, database version and OS.
Was the performance acceptable before? If yes, any changes been done recently?
Do you have the statistics collected up to date?
Please enable trace and generate the TKPROF to determine why the request takes that long to complete.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Slow+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Slow+AND+Concurrent+AND+TKPROF&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Patch R12 on T4 engine takes a long time
Hi All,
I have patched R12 64bit (patch 8919491) on T4-1 machine takes a long time (not completed after 40 hours).
ram 16, sga 2g, another init.ora I set default, idle cpu concumption 99%
message alert.log : Incremental checkpoint up to RBA [0x3.1afee1.0], current log tail at RBA [0x3.1aff77.0]
please helpHi Husein,
Thank you for your help.
I run adpatch as instruction on Readme.txt 8919491.
here are status 16 of workers:
96 -rw-r--r-- 1 oradev dba 48423 May 9 07:06 adwork004.log
134 -rw-r--r-- 1 oradev dba 67870 May 9 07:04 adwork007.log
148 -rw-r--r-- 1 oradev dba 74786 May 9 07:04 adwork005.log
124 -rw-r--r-- 1 oradev dba 63411 May 9 07:04 adwork008.log
54 -rw-r--r-- 1 oradev dba 27221 May 8 21:00 adwork002.log
162 -rw-r--r-- 1 oradev dba 82239 May 8 21:00 adwork003.log
224 -rw-r--r-- 1 oradev dba 102927 May 8 21:00 adwork001.log
16 -rw-r--r-- 1 oradev dba 7809 May 8 21:00 adwork012.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork014.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork013.log
20 -rw-r--r-- 1 oradev dba 9746 May 8 21:00 adwork011.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork015.log
20 -rw-r--r-- 1 oradev dba 10140 May 8 21:00 adwork010.log
68 -rw-r--r-- 1 oradev dba 34358 May 8 21:00 adwork006.log
22 -rw-r--r-- 1 oradev dba 10493 May 8 21:00 adwork009.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork016.log
I'll send you 2 workers status are adwork004.log and adwork016.log:
1. adwork004.log :
The Index in xdf-file and db match perfectly. No alteration necessary.
Index WF_USER_ROLE_ASSIGNMENTS_N3 exists under APPLSYS schema.
Checking for differences
Column_name and Uniqueness match for both file and DB Indexes
The Index in xdf-file and db match perfectly. No alteration necessary.
Index WF_USER_ROLE_ASSIGNMENTS_N4 does not exist in APPLSYS.
Skipping the creation of index WF_USER_ROLE_ASSIGNMENTS_N4 in current mode.
Index WF_USER_ROLE_ASSIGNMENTS_U1 exists under APPLSYS schema.
Checking for differences
Column_name and Uniqueness match for both file and DB Indexes
The Index in xdf-file and db match perfectly. No alteration necessary.
Performing AOL meta data updates
Attempting to update fnd tablespace meta data
Upload of Fnd_Object_Tablespaces is successful
AOL metadata updated successfully.
==========================================================
Done calling the utility function. Return Code = [0] TimeStamp = [Wed May 08 21:01:01 WIT 2013]
Updating task with status 0
Time when worker completed job: Wed May 08 2013 21:01:01
AdjavaWorker has reached the maximum wait timeout specified( 36000000 ). So Exiting.
2. adwork016.log :
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/oracle/oradev/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/oracle/oradev/apps/apps_st/comn/java/lib/appsborg.zip:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/oracle/oradev/apps/apps_st/comn/java/classes"
Calling /u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.sql.SQLException: The Network Adapter could not establish the connection
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at oracle.apps.ad.worker.AdJavaWorker.getAppsConnection(AdJavaWorker.java:1041)
at oracle.apps.ad.worker.AdJavaWorker.main(AdJavaWorker.java:276)
Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection
at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
It's mean my machine is not enought for 16 workers ?
please help -
Process chain running long time
Hi all..
I have one process chain.that chain haveing very small data.when iam created time it runs nearly 20 to 30 mints.
Now the same chain running nearly 3 hours..
Why its taking very long time?How to reduce the chain running time.Any steps to reduce the chain running time..
Thanks
RamyaHi,
Check the load in the chain which is taking long time.
Check out how much data is that load uploading.
Regards,
Rohini -
Background Job running long time.
Hello All,
One of customer background job running for long time more than 11 hours, but usually this jobs get completed within 4 hrs.
I have checked in WP trace file, it shows "WP has reached abap/heaplimit=40000000".
This is the Value I can see in RZ11. Now it is not possible to change the value.
Frequently facing this problem, please guide me to solve this issue.
Regards
Vinay.Hi
First of all, abap/heaplimit is the limit of memory usage by a WP.
Follwing is the documentation from help.sap.com
The value of the parameter should be between 10000000 (10 MB) and 2000000000 (2GB), the recommended default setting is 40000000 (40 MB).
The objective is to have the least number of work process restarts as possible, without a swap space bottleneck occurring. The heap memory allocated by the work processes has to be released again.
As shown in the graphic, the value of abap/heaplimit should be smaller than abap/heap_area_dia or abap/heap_area_nondia, so that the dialog step that is running can still be executed. This prevents the work process from working against the operating systemu2019s swap space limit if there is a programmed termination of the work process.
So,Do the above checks. And importantly check the memory utilizations at the time of running your job and check whether any other job was also running at the sametime.
Increasing the parametes is not a good idea.. If you continuously face this issue then only think of parametes. As u said ,this problem is not happenng too often.
Hope this is useful -
Hi All,
when i run the query in Analyzer,it is taking longer time.the query is built on DSO.
can anyone give me inputs why the query is taking much time
Thanks in Advance
ReddyHi,
Follow this thread to find out how to improve Query performance on ODS.
ODS Query Performance
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Hope this helps.
Thanks,
JituK -
hi
I'm having a query running for long time, Im new to dba can any one suggest me methods to make it faster it's running now and i have to make it execute it faster
parallel servers=4, and there are no inactive sessions.
thanks in advanceMake a habit of putting the database version in the post
As i told u before i depends on lot of things not only merge(cartisian ) joins,
1)It depends on the load the database is having,Was this query running fastly before?if it was running fastly then was the workload same as today?
2)Any changes done to database recently or the server?
3)only this query is slow all the queris are slow?
4)When was database last restarted?
5)Are u using bind variable in the query?
6)Is you library cache properly sized?If the query is doing lots of sorts then is your PGA properly sized?
7)Database buffer cache is properly sized?
8)How much memory your database is having?
9)Is your SGA properly fits in your memory or its getting swaped?
Etc...Etc
Check all these things
Regards
Kaunain -
FIM Reporting initial sync running long time
We have installed FIM Reporting last month , afterwards our FIM reporting initial sync powershell script is running from last month to Sync FIM data with SCSM server , but still only half data is synced with SCSM server ,
we have 4 server
1. Server1 --FIM server
2. Server2 -- FIM database
2. Server3 -- SCSM service manager and SQL server Databases for Service manager and Data warehouse
4. Server4 -- Data warehouse server
As FIM initial sync script is taking long time to sync so we found some errors in Server 4 (Data warehouse server) multiple times during ETL jobs running.
Error screen shot
Please give some suggestions to make FIM initial sync fasterPlease try Resume-FIMReportingInitialSync instead of starting initial sync once again.
Sadly Initial Sync is very long and even on test environments it can take a long time.
But it seems that data from FIM was successfully moved to reporting database, but it hasn't been calculated by Service Manager correctly between its databases.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.
Maybe you are looking for
-
In an Apex report SQL query, i had written a statement for the column as '<div style="width: 260px;">'|| PARTY_NAME || '</div>' as PARTY_NAME to avoid wrapping of the column text. Now, when i download the report in csv format, i get the output in PAR
-
Can't back up files because of one video, no DVD recorder
How do I back up my music and not include the one long video that I have? It's a 900 mb file. My laptop does not include a DVD burner so I can't use DVD R discs. I unchecked the video, but iTunes still wants to back it up and insists on a blank DVD.
-
How good is the java Ras Sdk in Business objects XI?
I have programmed some reports from scratch by using the java ras sdk. Somehow I have the feeling that new features of XI like dynamic image location, or running totals aren't so well supported as for example through the Crystal report Designer. Do
-
hi experts, my customer requires that: for example, for year 2007 field1 field2 field3 A1 B1 =A1+B1 A2 B2 =A2+B2 for year 2008 field1 field2 field3 A1 B1 =A1*B1 A2 B2 =A2*B2 as show above the field
-
I have a push button with mechanical action set to switch until release(so that it gives an impulse boolean ON for 1 sec). I want to know a way so that the case structure remains active for a specified time after the push button goes off. Thanks in a