In replacing a hard drive on a Mac book circa 2006, can you put too much hard drive space in and cause overheating? I've had 2 hard drives fail after installation in the past 3 weeks.
I recently had my Mac book circa 2006 updated to OS Lion and in the process was told I needed a new hard drive. I just replaced my original hard drive 9 months ago and was told at that time not to put too large a hard drive on my laptop or it could overheat. Now I have gone through 2 hard drives in the past 3 weeks since updating to Lion both of which were a terabyte in size. The authorized repair shop that put both failed hard drives in insists that the size of the hard drive does not cause problems in the Mac book but I am wondering why 2 failed in such a short time when the smaller hard drive lasted. It was working when I took it in for the updates but their diagnotic test showed that the first replacement HD was failing. I'm not sure what to think now.
Can I take that cloned hard drive and just plug it into my new Mac Mini and Viola I have two computers set up perfectly
Yes.
Similar Messages
-
My wall charger is showing sign of charge but it's not charging, last three days I charged my iphon to mac book pro, what can do for charge with my wall charger. And I tarted also 3 deferent chargers wich is working with other iPhones but my iphon is not charging it's only showing the sign of charge.
Hi there Zeeshan Saeed Al Barvi,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
-Griff W. -
Can you update too much for an older Mac?
I have the original Intel iMac, 2 GHz Intel Core Duo. It is plodding along ok. I am using OSX 10.5.8. I am wondering if I can update to Snow Leopard or Lion? I know sometimes you can update too much on an older machine and it will run slowly. I have some software I want to run that needs Snow Leopard or has a Beta for Lion.
Hi,
Here are the System Requirements for
Snow Leopard Specs:
http://support.apple.com/kb/SP575
Lion Specs:
http://www.apple.com/macosx/specs.html
In all honesty your are probably correct in your assumption about updating an Older Mac too much...
Just my opinion by the way... others may differ...
Cheers, -
I have a laptop and desktop can I sync my itunes to a master libary on a nas or my airport extream? this would be similar to syncing my devices to my imac (iPad, iPhonce, ect.)
two answers as I am unshour to what you want to do:
Setup homeshareing or:
1) QUIT not just Close iTunes if it open
1) Make a folder on the shared disk
2) Move the "Users/username/Music/iTunes folder you want to share with all the devices to the folder on the shared disk
3) Make that folder accessable by all the users you want to access it.
4) Hold the "Option/alt" key down and click iTunes and it will ask if you want to "Choose a Library"
5) click "Choose a Library" and choose the one on the shared disk
6) Do this on evey meachine you want to have access to this library
8) REMBER THAT IF YOUR NOT CONNECTED TO YOUR SHARED DISK THEN YOU WILL NOT BE ABLE TO ACCESS YOUR LIBRARY but you can choose librays at any time by using step 4 and you can have as meany librarys as you like.
I hope this answers your question
Sorry for any bad spellings I am dyslex...... -
It is taking nearly 10 mts for moutain lion to boot. I have used Mactune up utility to check disk status and there are no problems with the disk. Double checked with SMART utility and it reported no issues with the disk. Out of 320GB disk, 220 gb is free space in the disk
Ran anti virus to check for any virus relalted issues and found none. I have also checked programs which are part of login in User and Groups. I found only iTunes helper and unchecked the same. Post this operation, i had shutdown my pc and then re-started and am still experiencing 10 mts window for start up. I am not seeing errors in the macbook pro. can someone advise what needs to be done. do i need to reinstall mountain lion. if yes, can someone advise me how to reinstall mountain lion without erasing disk.pls refer my previous post, i have indeed checked console message. please let me know if i need to look for specific error message. i have pasted logs below from the latest PC start i did. time mentioned here is indian standard time.
03/01/13 6:43:35.000 PM bootlog[0]: BOOT_TIME 1357218815 0
03/01/13 6:53:54.000 PM kernel[0]: PMAP: PCID enabled
03/01/13 6:53:54.000 PM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
03/01/13 6:53:54.000 PM kernel[0]: vm_page_bootstrap: 835918 free pages and 204466 wired pages
03/01/13 6:53:54.000 PM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
03/01/13 6:53:54.000 PM kernel[0]: zone leak detection enabled
03/01/13 6:53:54.000 PM kernel[0]: standard timeslicing quantum is 10000 us
03/01/13 6:53:54.000 PM kernel[0]: standard background quantum is 2500 us
03/01/13 6:53:54.000 PM kernel[0]: mig_table_max_displ = 74
03/01/13 6:53:54.000 PM kernel[0]: TSC Deadline Timer supported and enabled
03/01/13 6:53:54.000 PM kernel[0]: corecrypto kext started!
03/01/13 6:53:54.000 PM kernel[0]: Running kernel space in FIPS MODE
03/01/13 6:53:54.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
03/01/13 6:53:54.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
03/01/13 6:53:54.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
03/01/13 6:53:54.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
03/01/13 6:53:54.000 PM kernel[0]: calling mpo_policy_init for Sandbox
03/01/13 6:53:54.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
03/01/13 6:53:54.000 PM kernel[0]: calling mpo_policy_init for Quarantine
03/01/13 6:53:54.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
03/01/13 6:53:54.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
03/01/13 6:53:54.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
03/01/13 6:53:54.000 PM kernel[0]: MAC Framework successfully initialized
03/01/13 6:53:54.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
03/01/13 6:53:54.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
03/01/13 6:53:54.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
03/01/13 6:53:54.000 PM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
03/01/13 6:53:54.000 PM kernel[0]: [ PCI configuration begin ]
03/01/13 6:53:54.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
03/01/13 6:53:54.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
03/01/13 6:53:54.000 PM kernel[0]: console relocated to 0xf80000000
03/01/13 6:53:54.000 PM kernel[0]: PCI configuration changed (bridge=16 device=4 cardbus=0)
03/01/13 6:53:54.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
03/01/13 6:53:54.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe353428; max speed s800.
03/01/13 6:53:54.000 PM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
03/01/13 6:53:54.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
03/01/13 6:53:54.000 PM kernel[0]: rooting via boot-uuid from /chosen: BE73913A-31AD-3011-8443-CBF5FED7F18E
03/01/13 6:53:54.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
03/01/13 6:53:54.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
03/01/13 6:43:36.990 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
03/01/13 6:53:54.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK3265GSXF Media/IOGUIDPartitionScheme/Customer@2
03/01/13 6:53:54.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 2
03/01/13 6:53:54.000 PM kernel[0]: BTCOEXIST off
03/01/13 6:53:54.000 PM kernel[0]: BRCM tunables:
03/01/13 6:53:54.000 PM kernel[0]: pullmode[1] txringsize[ 256] reapmin[ 32] reapcount[ 128]
03/01/13 6:53:54.000 PM kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
03/01/13 6:53:54.000 PM kernel[0]: Kernel is LP64
03/01/13 6:53:54.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
03/01/13 6:53:54.000 PM kernel[0]: macx_swapon SUCCESS
03/01/13 6:43:36.990 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
03/01/13 6:53:47.390 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
03/01/13 6:53:54.499 PM fseventsd[46]: event logs in /.fseventsd out of sync with volume. destroying old logs. (19 619 646)
03/01/13 6:53:54.500 PM fseventsd[46]: log dir: /.fseventsd getting new uuid: 70E015B3-1743-4179-AE1D-35C49D8FD5AB
03/01/13 6:53:54.761 PM distnoted[58]: Bug: 12C60: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
03/01/13 6:53:55.353 PM hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
03/01/13 6:53:55.000 PM kernel[0]: BCM5701Enet: Ethernet address 3c:07:54:1b:f4:64
03/01/13 6:53:55.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address 28:cf:da:ef:f6:c2
03/01/13 6:53:55.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
03/01/13 6:53:55.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
03/01/13 6:53:56.000 PM kernel[0]: Waiting for DSMOS...
03/01/13 6:53:57.178 PM appleeventsd[51]: main: Starting up
03/01/13 6:53:57.186 PM mDNSResponder[38]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
03/01/13 6:53:57.199 PM airportd[65]: _processDLILEvent: en1 attached (down)
03/01/13 6:53:57.253 PM hidd[45]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
03/01/13 6:53:57.251 PM com.apple.usbmuxd[21]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
03/01/13 6:53:57.307 PM coreservicesd[59]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
03/01/13 6:53:57.000 PM kernel[0]: createVirtIf(): ifRole = 1 -
Here's my EtreCheck info:
Hardware Information:
MacBook Pro (15-inch, 2.53GHz, Mid 2009)
MacBook Pro - model: MacBookPro5,4
1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
Startup Items:
HP IO - Path: /Library/StartupItems/HP IO
HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
PenTabletDriver - Path: /Library/StartupItems/PenTabletDriver
System Software:
OS X 10.8.4 (12E55) - Uptime: 0 days 0:15:20
Disk Information:
FUJITSU MJA2250BH FFS G1 disk0 : (250.06 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 249.2 GB (41.93 GB free)
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
at.obdev.nke.LittleSnitch (2.5.4)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] at.obdev.littlesnitchd.plist
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.autodesk.backburner_manager.plist
[loaded] com.autodesk.backburner_server.plist
[loaded] com.autodesk.backburner_start.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.intego.commonservices.daemon.plist
[loaded] com.intego.commonservices.icalserver.plist
[loaded] com.intego.commonservices.metrics.kschecker.plist
[loaded] com.intego.netupdate.daemon.plist
[loaded] com.intego.task.manager.daemon.plist
[failed] com.intego.VirusBarrier.daemon.plist
[failed] com.intego.VirusBarrier.logger.daemon.plist
[failed] com.intego.VirusBarrier.scanner.daemon.plist
[loaded] com.novatelwireless.mobilink3.plist
[loaded] com.novatelwireless.NvtlServer.plist
[failed] com.starfield.backupservice.plist
[loaded] com.wdc.WDDMservice.plist
[loaded] com.wdc.WDSmartWareServer.plist
Launch Agents:
[loaded] at.obdev.LittleSnitchNetworkMonitor.plist
[loaded] at.obdev.LittleSnitchUIAgent.plist
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.epson.eventmanager.agent.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.intego.commonservices.statusitem.plist
[loaded] com.intego.netupdate.agent.plist
[loaded] com.intego.task.manager.notifier.plist
[loaded] com.intego.VirusBarrier.alert.plist
[failed] com.visionobjects.Axiotron.Quickscript.login.plist
[loaded] com.wacom.pentablet.plist
[failed] com.wacom.wacomtablet.plist
User Launch Agents:
[loaded] com.akamai.client.plist
[failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
[loaded] com.divx.agent.postinstall.plist
User Login Items:
uHD-Agent
AdobeResourceSynchronizer
vzwwirelessd
CrossOver CD Helper
3rd Party Preference Panes:
Flash Player
Flip4Mac WMV
Growl
Java
MacFUSE
NetUpdate
Perian
PenTablet
WacomTablet
Internet Plug-ins:
AdobePDFViewer.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
OVSHelper.plugin
QuickTime Plugin.plugin
Unity Web Player.plugin
WacomNetscape.plugin
WacomTabletPlugin.plugin
User Internet Plug-ins:
BlueStacks Install Detector.plugin
fileEditTool64_15.plugin
Bad Fonts:
None
Top Processes by CPU:
14% Safari
4% WindowServer
1% EtreCheck
1% Little Snitch Network Monitor
1% hidd
0% configd
0% mds
0% DivXMediaServer
0% mDNSResponder
0% lsd
Top Processes by Memory:
131 MB WebProcess
123 MB Safari
74 MB Dock
74 MB WindowServer
70 MB CrossOver CD Helper
61 MB mds
41 MB coreservicesd
29 MB SystemUIServer
25 MB Finder
20 MB PluginProcess
Virtual Memory Statistics
1.84 GB Free RAM
1.23 GB Active RAM
164 MB Inactive RAM
525 MB Wired RAM
387 MB Page-ins
0 B Page-outs
Any guidance would be very appreciated! My little MacBook has been a very good machine up until recently.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Help Hotmail wont setup on my IPHONE 7 OIS7 used to work now it won't setup.
If you have two-step verification turned on in Hotmail, you'll have to log in with a browser and turn it off.
-
Safari keeps quitting on me and has been for the past few weeks.. help!
I have a macbook pro and I am using an up to date version of safari. For the past few weeks safari will quit out of now where and any page I was on will be gone, which is very inconvenient if I'm doing research for school and such because everything will be lost. I have gotten rid of extensions and that has not worked. Would love some help! Thanks
Check the links below for options to remove the Adware
http://www.adwaremedic.com/index.php
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support -
I had hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now it is looping on 4 items to delete for the past 2 weeks. I can't reboot, reload, or restart. I have to let the battery run down for it to turn off. I think a big part of the problem is that someon one the internet (the hacker) was mirroring my hard drive. It seems to have locked up my system. I could be wrong about this guess, though. All I do know is that it is now looping on the last 4 iems, and I can't do anything.
Well, I can get it to turn on, but all it does is continously try to delete the last 4 items. When I try to reload Snow Leopard, it tells me my hard drive is full and that I need to delete items.
Can anyone help? I am so lost without my Mac. I am back on the PC, and though it works, I'm sure many of you will understand when I say it's just not a Mac.
Thanks.I installed Snow Leopard using my Apple external Superdrive. I followed directions I found on the Apple site. Here is the article info: Mac OS X v10.6 Snow Leopard: How to Erase and Install
Article HT3910
located at: http://support.apple.com/kb/HT3910
Everything was going smoothly until I got to the reinstall part. I had to choose to reinstall on a hard drive or network drive. I've never used a network drive; just the hard drive. It seems that's where the troubles began. I selected the hard drive. It seemed to go well, and then I got the message that I needed to delete some files because I was out of space. I chose to get rid of my music files, but, there were only 636. I don't know what the rest of the files were. I was using the Secure Empty Trash command.
That was my first time doing an erase and install. I tried to do it again, but I now get a continuous error telling me that my hard drive is full and I must delete files. Only I can't delete files because 4 files are still being deleted and my computer won't let me stop the process.
I found out about the hackers mostly by the fact that whenever I used to watch something like Hulu or Netflix, I never had problems with internet connection or speed. Lately, I had internet connection problems. I went in to check my settings for my internet provider and found out the settings had been changed to public and all these extra computers were connected to my network. -
I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
I don't know what to do any help would be greatly appreciated!
By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck -
My iPhone 3GS (working on iOS 6.1.3) has not backed up to iCloud for the past 10 weeks.
My iPhone 3GS (working on iOS 6.1.3) has not backed up to iCloud for the past 10 weeks. And whenever I try Backing up to iTunes or to iCloud via either a pc or a Mac, I get the message: "Itunes could not backup the iPhone because an error occured". I tried turning off all apps for backup, but that did not help. I tried deleting all the photos and that did not help either. I tried the backup trobelshooting and I have tried using different computers. I'm completely stomped.
Hi ShakedG,
I'm not sure if this is what you were referring to, but I just wanted to make sure that you had seen the following article:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Regards,
- Brenden -
For the past 2 weeks I have not been able to open any small video on facebook or on the yahoo page . I have installed Adobe and it still dies not work. Help.
Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs -
For the past 2 weeks when I wake my computer I get a white screen in front of my background
for the past two weeks when i wake my computer from the sleep mode, I have a white screen in front of my background and the hard drive spins like I have restarted my computer.
Could be any number of things. What user trobleshooting have you tried? Restart (power off/on) reset, hold the sleep/wake and home buttons together until you see the Apple logo and then release. See if it works after the phone restarts. Next is a restore from a backup (make sure you made a current one), then restore as a new device, which deletes all data from your device. If it doesn't work after all that, then make an appointment at the Genius Bar at the local Apple store, it is probably a hardware issue.
I have seen something similar which is generally diagnosed as a hardware issue. -
Podcasts have not downloaded for the past two weeks. What's happening?
None of my podcasts have downloaded for the past two weeks. Anyone know wht's happening?
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
How can I hide early morning hours in iCal?
how can I hide early morning hours in ical??? i'm sleeping at those hours and i really don't need to see them. it would give me a lot more space to see what really matters if i could define myself what hours i would like ical to show. i saw an old po
-
Unable to read space page parameter value throug EL
Hi All, I have been stuck in a big problem, I have to use dynamic page template in web center space means Different template for different pages. For this I added a new page parameter in page properties but I am not able to read any Page Parameter Pr
-
In Yosemite I cannot locate the My Templates file for Pages.
In Yosemite I cannot locate the My Templates file for Pages.
-
DataTable binding doesn't work dependably
hi all, i'm observing a strange behaviour on my JSF page. i use a dynamic datatable for displaying data. unfortunately the getter of the table isn't called (after the method call / rerender of the page) so the table stays emtpy. the bean providing th
-
I had a case that I drop little juice over my macbook air, I dried it immediately and it keep working fine, as this happen while I am traveling I kept working on it for around two week, it was working fine except that the few key became sticky. Whe