In SOLMAN after applying security notes warings are coming

Hi All,
Please help here
We have applied some security notes in SOMAN Dev & made the TR for the same
after importing the TR in Live we are getting warining.
log detail is as below
Post-import method SCWN_AFTER_IMP_METHOD started for NOTE L, date and time: 2010111705264
Beginn: After import method for SAP Note 0001379987
No release data for Note 0001379987 in the data file in the request
End:    After import method for SAP Note 0001379987
Beginn: After import method for SAP Note 0001380710
No release data for Note 0001380710 in the data file in the request
End:    After import method for SAP Note 0001380710
Beginn: After import method for SAP Note 0001381719
No release data for Note 0001381719 in the data file in the request
End:    After import method for SAP Note 0001381719
Beginn: After import method for SAP Note 0001402132
No release data for Note 0001402132 in the data file in the request
End:    After import method for SAP Note 0001402132
Beginn: After import method for SAP Note 0001412774
No release data for Note 0001412774 in the data file in the request
End:    After import method for SAP Note 0001412774
Beginn: After import method for SAP Note 0001430970
End:    After import method for SAP Note 0001430970
Execution of programs after import (XPRA)
End date and time : 20101117052647
Ended with return code: ===> 4 <===
we checked and could see these SAP Notes coming in warning message has been implemented in our Dev & Live suuccessfully
still waring is coming
please help here to avoid this warnings
Regards,
Vyash

Hi,
Regarding the message "No release data for Note XXXXXXXXX in the data file in the request"
You can normally ignore this warning.
The warning's meaning:
When a Note (R3TR NOTE) is transported, the release data for the
software components affected by the Note is normally transported too. If
a transport request contains several Notes, however, the release data
is only transported with one of the Notes, and not with all of them.
When a transport request containing several Notes is imported, the
system issues a warning for all Notes that do not have release data
transported with them.
If the system issues this warning for all Notes during a transport
request import, however, this might mean that the data in the target
system is incomplete. If this is the case, the system will issue an
error message when the imported Notes are displayed with transaction
SNOTE.
You can solve this display problem by downloading one of the Notes again
from SAP Service Marketplace. The functionality of your system is in no
way impaired.
Hope the above information could be helpful to your situation.
Kind regards,
Fabricius

Similar Messages

After applying Security Update 2006-001 can't launch Office X apps

I noticed that, after applying Security Update 2006-001, I can't launch Microsoft Word nor Excel nor Power Point (Office X, 10.1.6 updated). If I double click the app icon, select and try to open from File menu or try to launch it from the Dock, I get the message "The app has unexpectedly quit". This does not affect Entourage so far. I can open existing files double clicking on their icons and, once the app is running, create new files from menu bar. Repaired permissions, checked for corrupted preferences files or templates but to no avail.
Can anybody help?
iBook G4 Mac OS X (10.3.9) 512 MB RAM

DivX Doctor is a freeware I had downloaded a few days before applying Security Update 2006-01 (http://www.macupdate.com/info.php/id/4683). It certainly was responsible for my problems with Office X apps because, as I said, they completely disappeared as soon as I got rid of it.
I hadn't the memory problems you mentioned (I've applied also Security update 2006-02 without problems).
Don't know if this can help, but you might want to give a try to Disk inventory X (http://www.macupdate.com/info.php/id/14393) [quote]Disk Inventory X is a disk usage utility for Mac OS X. It shows the sizes of files and folders in a special graphical way called "treemaps".
If you've ever wondered were all your disk space has gone, Disk Inventory X will help you to answer this question.[/quote]
Once DiskWarrior fixed a problem with free hard disk space on my machine, even though a small one.
iBook G4

Error could not access a java object field called allowAppDataInServContext after Applying Security

After applying the security patch 12-26 I am getting the error "Could not access a java object field called allowAppDataInServContext". When I removed the update the error goes away. When I read the update it returns.
The error states it occurred in the following line: cfapplication name="somename" clientmanagement="No" sessionmanagement="Yes" setclientcookies="Yes"

Is it a linux server? Look at the following, second comment.
http://blogs.coldfusion.com/post.cfm/coldfusion-security-update
^_^
EDIT: Also, http://www.shilpikhariwal.com/2012/12/security-hotfix-for-coldfusion-9-and.html

Data at all level do not match after applying security

Hi ,
We are implementing the security and observed following.
1. Data is loaded in the cube correctly and report shows up the data correct at all level.
2. Now we apply the security which which will restricts the users to see some members according to the role they are mapped to.
3. When we create a report we are seeing the values at second and all below level to be correct but the value at all level still shows same as got in step 1.This means that the value is not dynamically aggregated while creating the report.
Also we checked that the values are not precomputed at all level for any dimension.
Any pointers to resolve this?
Thanks in advance.
Thanks
Brijesh

John, A sureshot way to simulate the relational aggregation for various users (who have vpd) applied on the fact information is to create the AW for each user. That way the scoping of dimension hierarchies and/or facts occur on the relational source views and each user only sees the summation of the visible values in the AW. You can use (local) views in each user's schema on the appropriate AW and make the application access seamless across all the user schemas. Such a solution may be a bit redundant (leaf data present in multiple AWs increasing load time) but should work in all environments since it does not involve any tweaking of internal objects via custom olap dml.
+++++++++++++
Regd implementing the approach to have a single AW servicing multiple users but also allow for individual users to see only their data (for both base and summary data).. This can be done in 10gR2. We have used this approach with a 10gR2 AW based on suggestions from people who were in the know :)
Please note the disclaimers/caveats..
* Works for 10gR2 with no foreseeable way to port this onto 11g when olap dml object manipulation is prevented by the lock definition (lockdfn) keyword.
* Custom code needs to be run at startup.. Preferably in PERMIT_READ program alone since this way any changes made by any of the restricted user(s) do not get saved/commited. This is the manner that sql query on AWM using vpd (say) would work.
* OLAP DML Code is very dependent on the nature of the cube structure and stored level setting.
* This approach provides for a neat and nifty solution in the context of a PoC/demo but the solution performs a (possibly exhaustive) cleanup of stored information during the startup program for each user session. And since this happens in the context of a read only session, this would happen every time for all user sessions. So be sure to scope out the extent of cleanup required at startup if you want to make this a comprehensive solution.
*********************** Program pseudo code begin ***********************
" Find out current user details (username, group etc.) using sysinfo
limit all dimensions to members at stored levels
limit dim1 to members that user does *not* have access to.
NOTE: This can lead to perf issues if PROD dimension has thousands or millions of products and current user has access to only a few of them (2-3 say). We will have to reset the stored information for the majority of products. This is undo-ing the effects of the data load (and stored summary information) dynamically at runtime while the users request a report/query.
limit dim1 add descendants using dim1_parentrel
limit dim1 add anscestors using dim1_parentrel
limit dim1 keep members at stored levels alone... use dim1_levelrel appropriately.
same for dim2 if reqd.
"If we want to see runtime summation for stores in North America (only visible info) but see the true or actual data for Europe (say).. then we need to clean up the stored information for stores in North America that the current user does not have access to.
Scenario I: If Cube is uncompressed with a global composite.. only 1 composite for cube
set cube1_meas1_stored = na across cube1_composite
set cube1_meas2_stored = na across cube1_composite
Scenario II: If Cube is uncompressed with multiple composites per measure.. 1 composite per cube measure
set cube1_meas1_stored = na across cube1_meas1_composite
set cube1_meas2_stored = na across cube1_meas2_composite
Scenario III: If Cube is compressed but unpartitioned..
set cube1_meas1_stored = na ... Note: This can set more cells as null than required. Each cell in status (including cells which were combinations without data and did not physically exist in any composite) get created as na. No harm done but more work than required. The composite object may get bloated as a result.
Scenario IV: If Cube is compressed and partitioned..
Find all partitions of the cube
For each partition
Find the <composite object corr to the partiton> for cube
set cube1_meas1_stored = na across <composite object corr to the partiton>
"Regular Permit Read code
cns product
permit read when product.boolean
*********************** Program pseudo code end ***********************
The cube in our aw was uncompressed/partitioned (Scenario I).
It is more complicated if you have multiple stored levels along a dimension (possible for uncompressed cubes) where you apply security at an intermediate level. Ideally, you'll need to reset the values at load/leaf level, overwrite or recalculate the values for members at all higher stored levels based on this change, and then exit the program.
HTH
Shankar

Transform path error when uninstalling 8.1.2 after applying security update

I have been testing a customized install of 8.1.2 and noticed that when you try to remove 8.1.2 after applying the latest security update, an error pops. "Error applying transforms. Verify that the specified transform paths are valid". Looking in the registry you can see an odd entry in the "TRANSFORMS" string value entry under HKEY_CLASSES_ROOT\INSTALLER\PRODUCTS\68AB67CA7DA73301B7448A2100000030\. The value is changed to "@AcroRead.mst;C:\Program Files\Adobe\Reader 8.0\Setup Files\{AC76BA86-7AD7-1033-7B44-A81200000003}\RdrSU.mst" after applying the security update. You can edit the path to remove everything after @AcroRead.mst and then the software can be uninstalled. This problem does not happen if the install is not customized using a transform. I would like to deploy this software with the security update but do not want problems removing the software in the future. Please advise...

I don't have a solution but found the exact same problem when I was testing security update 1 for a customised 8.1.2 deployment.
I have decided NOT to deploy the update until it is fixed (or released as an MSP file so I can patch the MSI)
I tried to contact Adobe support (UK) but they were not interested as we don't have a support contract :-(

Too much Time until logon window after applying Security Configuration Wizard on DC

Hi,
The scenario is the following:
Domain Controller on Windows 2012 R2
DHCP installed on Domain Controller
Clients: Win7, Win8
Servers: Win2008/R2, Win2012 R2
After applying a SCW template on a DC, the logon window takes too much time to appear (after reboot, lock or sign out).
The seetings in the template are the following:
Select Server Roles: All of the default options selected by SCW
Select Client Features: All of the default options selected by SCW
Select Administration and Other Options: All of the default options selected by SCW
Select Additional Services: All of the default options selected by SCW
Handling Unspecified Services: Do not change the startup mode of the service
Network Security Roles: All of the default options selected by SCW
Require SMB Security Features: 2 checkboxes marked
Require LDAP Signing: the checkbox marked
Outbound Authentication Methods: Domain Accounts
Outbound Authentication using Domain Accounts: 2 checkboxes marked
Inbound Authentication Methods: none of the checkboxes marked
System Audit Policy: Audit successful activities
The question is:
What options(s) include/exclude from SCW template that avoid too much time logon windows takes to appear?
Thanks in advance!

Hi,
Based on my research, SCW helps administrators to ensure that only those services, application capabilities, and ports required for the roles to function are available; anything not specifically needed by the roles the server holds will be disabled. These
tasks above all consume time to implement, which causes the delay for the Windows logon screen to display.
Therefore, as the way I see it, it is a normal behavior, and I didn’t find any option which could avoid/reduce time spent on applying settings within the SCW template.
More information for you:
The Security Configuration Wizard
https://technet.microsoft.com/en-us/magazine/2007.04.securitywatch.aspx
Security Configuration Wizard
https://technet.microsoft.com/en-us/library/cc754997.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

CK40N - Still open even after applying the note

Hello Everyone!
Greetings!
Experiencing issues in the costing run. SAP ECC 5.0
After the marking job completion observed that there are some u2018Still Openu2019 items. After some research found the SAP notes u2013 0000542790, 0001321242 & 0001402978.
SAP note 0000542790 is not applicable to us as the client is on SAP ECC 5.0. For the short term fix, as per the note 542790 have executed the command u2018=cksuu2019. It worked.
To apply the notes 0001321242, 0001402978 was testing in the test systems and I still see the u2018STILL OPENu2019 items even after implementing the SAP notes 0001321242 and 0001402978. Both the notes have been sucessfully implemented and also verified the corrections.
Any suggestions/advice, please. Thanks in advance !
Satish

Hi Satish,
There can be valid reasons for the 'still open' Materials.
The following are reasons for 'still open'
1. the materials were included in another costing run so there was an
overlap in released cost estimates
2. there was already a released cost estimate for those materials so
the system did not allow for another one - this could have been costed
manually and released manually (ck11) rather than in ck40n
3. there was a stop in the job that ran to release them (you mentioned
periods were closed). After the restart, some of the statistics could
have been incorrectly updated.
Furthermore, please see the note:
542790 Inconsistency correction: Costing run statistics
If need need to find the 'still open' Materials.
If you run tCode 'SE16' and view the table table KALM which contains
the entries for all materials costed within the costing run.
Field 'KALM-FEH_STATUS is the cost estimate's status after step costing.
1) Find cost estimates created originally within cstg run
So, you have to select all entries of KALM for the specific costing
run which are having KALM-FEH_STATUS = 'KA'.
This is the number of cost estimates which should have been marked in
the later marking step.
2) Find cost estimates released successfully
The set of released cost estimates is given by selection of table
KEKO: specify KALAID and KALADAT and FEH_STA = 'FR'.
3) Find missing cost estimates
Compare the results of 1) and 2):
Which material/plant have an KALM entry, but not a released cost
cost estimate ?
> this will be the set of cost estimates you are looking for...
Regards,Declan

Error refreshing report after applying security restrictions in IDT

Hi,
I have created a report and now the requirement is that the user should be able to view data of his profile only for which i have created restricstions at universe at Business layer.. But after applying these if i refresh by the user id i get the error where as on removing this no error.
"An internal error occured while calling 'porcessDPCommandsEx' API. (Error: ERr_WIS_30270) (Error: INF)".
If i refresh using any other id other than used at restrictions the reports is getting refreshed. Please advise.
This is on BOXIR4 SP3.
Thanks in advance.

I believe you are implementing Row level restrictions either in UDT or IDT, The below video is for IDT, the concept is same for UDT.
http://scn.sap.com/docs/DOC-8461
Create a data security profile that restricts access to specific rows: Information design tool 4.x - YouTube
Regards,
Ashok Vemulapalli
Search is out best friend

Variable SERVERNAME is undefined in CFIDE after applying security patch for APSB09-12

We attempted to apply the hotfixes available for ColdFusion and JRun released August 17, 2009 on our ColdFusion v8.0.1 and now are not able to connect to the ColdFusion administrator page.
This is the link to the securty update:
http://www.adobe.com/support/security/bulletins/apsb09-12.html
We receive the login screen, enter our user/pass and are then presented with the following error message:
The web site you are accessing has experienced an unexpected error.
Please contact the website administrator.
The following information is meant for the website developer for debugging purposes.
Error Occurred While Processing Request
Variable SERVERNAME is undefined.
The error occurred in index.cfm: line 22
-1 : Unable to display error's location in a CFML template.
Resources: Check the ColdFusion documentation to verify that you are using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser
Mozilla/5.0 (Windows; U; Windows NT 5.2; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 (.NET CLR 3.5.30729)
Remote Address
127.0.0.1
Referrer
http://127.0.0.1/CFIDE/administrator/index.cfm
Date/Time
01-Sep-09 04:59 PM
Stack Trace
at cfindex2ecfm274406133.runPage(E:\cf8_final\cfusion\wwwroot\CFIDE\administrator\index.cfm: 22)
coldfusion.runtime.UndefinedVariableException: Variable SERVERNAME is undefined.
     at coldfusion.runtime.CfJspPage._get(CfJspPage.java:325)
     at coldfusion.runtime.CfJspPage._get(CfJspPage.java:287)
     at coldfusion.runtime.CfJspPage._autoscalarize(CfJspPage.java:1405)
     at cfindex2ecfm274406133.runPage(E:\cf8_final\cfusion\wwwroot\CFIDE\administrator\index.cfm:22)
     at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196)
     at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370)
     at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
     at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:288)
     at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48)
     at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40)
     at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
     at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
     at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:74)
     at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28)
     at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
     at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
     at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
     at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
     at coldfusion.CfmServlet.service(CfmServlet.java:175)
     at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
     at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
     at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42)
     at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
     at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
     at jrun.servlet.FilterChain.service(FilterChain.java:101)
     at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
     at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
     at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
     at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
     at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
     at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
     at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

This was caused by the Adobe patch, we removed the patch and applied the newly provided hot fix 3 and that resolved the issue.

Tungsten E2 Reset Loop After Applying Security Panel Update and Daylight Savings Updates

I applied the Security Panel and Daylight Savings updates to my Tungsten E2 handheld. The hotsync operation required me to press reset. Now my handheld loops on the Palm Powered screen. Subsequent attempts to reset have the same result or ask me to delete all data.
Does anyone have a solution for this?
Bob Ludwig
Post relates to: Tungsten E2

If you have the data current in Palm desktop, do the hard reset. Do another sync to see if the E2 starts looping.
If it does, you will need to rename the backup folder in the username folder and then sync again.
Here is a link to an article regarding the location of the username folder on the PC http://kb.palm.com/wps/portal/kb/common/article/37326_en.html
Try installing one update at a time to see if one of the updates are causing the issue.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

OIap AW are Invalid after applying the Oracle patch 9.2.0.6

Hi
We have applied Oracle patch 9.2.0.6. after applied the patch we are not able to connect with AW might be all AW are invalid.
i am getting the following error :
ava.sql.SQLException: ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_AW", line 18
ORA-06512: at line 1
at oracle.olap.awm.businessobject.aw.WorkspaceBO.getWorkspacesAttachedBySchemaUsingDML(WorkspaceBO.java:623)
at oracle.olap.awm.navigator.node.aw.SchemaNode.getChildren(SchemaNode.java:87)
at oracle.olap.awm.navigator.node.BaseNodeModel.refreshData(BaseNodeModel.java:74)
at oracle.olap.awm.navigator.node.BaseNodeModel.dTreeItemExpanding(BaseNodeModel.java:221)
at oracle.bali.ewt.dTree.DTreeDeferredParent.__fireExpansionChanging(Unknown Source)
at oracle.bali.ewt.dTree.DTreeDeferredParent.setExpanded(Unknown Source)
at oracle.olap.awm.navigator.node.BaseNode.expandHelper(BaseNode.java:1527)
at oracle.olap.awm.navigator.node.BaseNode.access$000(BaseNode.java:85)
at oracle.olap.awm.navigator.node.BaseNode$ExpansionThread.run(BaseNode.java:1488)
Any idea or thought would be appreciable.
Thanks
Anwar

Please file a TAR with support to resolve this issue.
Hope this helps,
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

Olap AW Invalid after applying Oracle patch 9.0.2.6

Hi
We have applied Oracle patch 9.2.0.6. after applied the patch we are not able to connect with AW might be all AW are invalid.
i am getting the following error :
ava.sql.SQLException: ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_AW", line 18
ORA-06512: at line 1
at oracle.olap.awm.businessobject.aw.WorkspaceBO.getWorkspacesAttachedBySchemaUsingDML(WorkspaceBO.java:623)
at oracle.olap.awm.navigator.node.aw.SchemaNode.getChildren(SchemaNode.java:87)
at oracle.olap.awm.navigator.node.BaseNodeModel.refreshData(BaseNodeModel.java:74)
at oracle.olap.awm.navigator.node.BaseNodeModel.dTreeItemExpanding(BaseNodeModel.java:221)
at oracle.bali.ewt.dTree.DTreeDeferredParent.__fireExpansionChanging(Unknown Source)
at oracle.bali.ewt.dTree.DTreeDeferredParent.setExpanded(Unknown Source)
at oracle.olap.awm.navigator.node.BaseNode.expandHelper(BaseNode.java:1527)
at oracle.olap.awm.navigator.node.BaseNode.access$000(BaseNode.java:85)
at oracle.olap.awm.navigator.node.BaseNode$ExpansionThread.run(BaseNode.java:1488)
Any idea or thought would be appreciable.
Thanks
Anwar

Igor,
Since you've encountered undocumented errors, your repository upgrade has failed. You'll want to leave the repository as is for troublshooting, if at all possible, and log a TAR with support if you haven't already. They'll ask you to upload your upgrade log file and your upgrade tmp directory.
Regards

EWA报告里的'security notes'

关于生产系统的EarlyWatch Alert报告中有这么一段话：
10.1 Security-related SAP Notes
Vulnerabilities exist in this system that can be closed easily. We found relevant security-related SAP HotNews that have not been applied.
Recommendation:
Apply relevant security-related SAP HotNews and Notes. An overview about such notes is published on Service Marketplace at /securitynotes.
To obtain a list of relevant security-related SAP Notes that can be applied easily, run the tool RSECNOTE in transaction ST13. It will provide a detailed list of the vulnerabilities discovered and the corresponding SAP Notes for correction. More security issues may exist.
For more information, refer to SAP Note 888889.
在st13里运行报表RSECNOTE能看到很多note需要安装。有些note是增加检查权限等。
我担心note安装上去后对现有用户现有操作有影响。例如用户现在操作正常，但安装note后用户操作就失败。
请问大家在实际情况中安装 Security-related SAP Notes吗？

Hello Mary,
Sorry for the late answer.
So you go to the "Change Management" workcenter, after "System Recommendation" then you have to choose the solution where your system is.
You can select the interval, for exple, the beginning is the last time when you applied security notes and the end is now.
And after you click on "apply filter", the job launched will calculate performance notes, security notes, corrections notes.
After you just have to click on security notes and select all these, and download it in your system, in order to know if you can apply it.

Security Notes with MOPZ

When you create a new maintenance package in MOPZ a screen is displayed saying
Display of Security Notes
With SAP Solution Manager 7.0 EHP1 SP26 and SAP Solution Manager 7.1 SP1 you can display the list of relevant security notes and trigger from Maintenance Optimizer the implementation of the missing security notes. (15 Aug 2011)
How is this done? I see no option in the MOPZ process where this can be done.

Hello Mary,
Sorry for the late answer.
So you go to the "Change Management" workcenter, after "System Recommendation" then you have to choose the solution where your system is.
You can select the interval, for exple, the beginning is the last time when you applied security notes and the end is now.
And after you click on "apply filter", the job launched will calculate performance notes, security notes, corrections notes.
After you just have to click on security notes and select all these, and download it in your system, in order to know if you can apply it.

How to avoid security note popup?

Hi,
I have two BSP Applications, which I start from SRM Enterprise Buyer via new window. I have created an internet service user, which I put in the ICF service of the application.
Here goes the question.
In one of my BSPs the new window appears like expected. In the otherone I get a popup message (I must translate this from German to English, but I hope you get the contents):
The popup says:
<i>Title: Security note
You are about to turn to an insecure connection. data which has been sent to the prior site, will possibly be sent to the insecure site. Do you wish to continue?</i>
Why is that? Both ICF entries use the same user and look the same - under security there is a radio at standard in both cases.
The URL of the BSP without Popup looks like this:
http://<host>:8028/sap/bc/bsp/sap/z_imp_all1/start.htm
the one with popup like this:
http://<host>:8028/sap(bD1kZSZjPTMwMQ==)/bc/bsp/sap/z_scan_pzn1/start.htm?sicht=pzn&username=MEYERM&HOOK_URL=https%3A%2F%2Fukmsapweb%2E<host>%2Ede%3A9211%2Fscripts%2Fwgate%2Fbbppu99354e5a01%2F%3F%7EOkCode%3DADDI%26%7Etarget%3D%5Ftop%26%7ECALLER%3DCTLG&OCI_VERSION=3%2E0&http_content_charset=iso%2D8859%2D1&returntarget=%5Ftop
Any ideas, how to avoid the popup, welcome.
regards, Matthias
Message was edited by: Matthias Kasig

Hi Renald and Rainer,
to Renald: Yes, I have also checked Internet options -- advanced, and unchecked the warning, when switching from save to unsave mode. I also unchecked the warning, if formular data is being redirected. Still this takes no effect. And anyway, I can't see the point, because from the same https page I've got two links which link to http-BSPs. One brings about the unwanted popup - the otherone, with apparently same settings does the security popup. The link itself is launched via JavaScript, like this:
<a href="JavaScript:launchCTLG('PZN_Scan');" class="catalog" alt="PZN" title="PZN">PZN</a>
to Rainer: I checked the note you gave. It contained a chm file. It also refers to the situation, that you get the popup message, when leaving https and turning to http. It also provides a solution like this:
<iframe id="myIframe" src="JavaScript:void(0);"></iframe>
In fact I can't change/modify the call of the URL - and it is already being called via JavaScript. The EBP page is SRM generated.
I shall try to copy the BSP application, that works fine without popup, and then put in the code of the popup-version... and see what happens next.
Thanks so far. I shall give feedback, when I have finished.
Matthias

In SOLMAN after applying security notes warings are coming

Similar Messages

Maybe you are looking for