In table TVTA, the entry SE44 02  is missing

Hi all,
When am trying to create a customer master record with ref to another customer master record am getting the message "In table TVTA, the entry SE44 02  is missing" and cld not able to extend the same customer master reocord to another sales area with different company code.
I want to create a customer master record in ref to the customer master record of sales area SE44/02/01 and company code SE01 to a new customer master reocord with sales area FI44/02/01 and company code FI01. But due to the above message am failing to do so.
what should i do in this case?
awaiting ur responses.
thanks in advance.
Cheers,
Anil.

Hello Aniku,
I think that I have reproduced your issue, and I get the message Nº F2644, please confirmed if your issue is this one. I have created the customer master record in the transaction XD01, and I have written the fields: the customer number (KUNNR); the sales organization (in your case: SE44); distribution channel (in your case: 02); and as reference: the customer number again; the sales organization (in your case: FI44); distribution channel (in your case: 02).
If this one is your issue, the problem is that you have forgotten to write the Division Number in the sales area you want to create, and also in the reference division.
Maybe your issue is the message Nº 2100. In this case, I have written the fields: the customer number (KUNNR); the sales organization (in your case: SE44); distribution channel (in your case: 02); division (in your case: 01); and as reference: the customer number again; the sales organization (in your case: FI44); distribution channel (in your case: 02).
If this one is your issue, the problem is that you have forgotten to write the reference Division Number.
I hope this solution helps you, if this explanation does not solve you issue please write step by step what you did.
Regards,
Johnattan Company
SAP SD Consultant

Similar Messages

  • In table T019, the entry  S  0   is missing

    I use FB50. When I want to park document, it gives error as "In table T019, the entry  S  0   is missing"
    How can I solve this problem?
    Wbr.
    İlker Çokkeçeci
    Computer Engineer
    Ankara,Turkey

    Dear Ilker,
    please check if You have all the following entries into Your T019 Table:
    A     S                300
    B     S                300
    D     S                300
    E     S                300
    V     S                300
    Z     S                300
    if not please do it by sm31.
    I hope this helps.
    Mauri

  • Error while creating cust In table T078D, the entry VD01 is missing...

    Hi Gurus,
    I am new to SAP and have just installed SAP 4.7 on my laptop. While creating customer master, a message displays In table T078D, the entry VD01   is missing, and even for XD01 the same message is displayed. Can you guysplease help me with this?
    Thanks
    Shiva

    Hi,
    this looks like some customizing records are missing in your installation.
    Table T078D contains the transaction dependant field settings.
    This is in relation with customizing transaction OB20
    In that table, there should be at least 15 records with the corresponding table key
    FD01
    FD02
    FD03
    VD01
    VD02
    VD03
    WR01
    WR02
    WR03
    WR11
    WR12
    WR13
    XD01
    XD02
    XD03
    So, if you don't find why standard customizing records are not part of you installation, you may re-create such records with the above keys.
    Please note that all fields that are not part of the key should at least contains '.' character for each digits of each fields.
    eg: FAUSA is 40 digits long.
    FAUSA = '........................................'
    Hope this helps
    Regards
    Alain

  • The entry ABCD ABCV  is missing in table T043G

    Hi
    I have to clear an open invoice manually using F-53.
    This is the error message i m getting
    "The entry ABCD ABCV  is missing in table T043G"    [Here ABCD is the company code]
    Please Help!
    Thanks!

    HI,
    please check if Your company code is defined in transaction OBA3
    or check the path IMG -> Financial Accounting -> Accounts Receivables and Accounts Payables -> Business Transactions -> Incoming Payments -> Manual Payments -> Define Tolerances (customers)
    Go through the customer master  and check which tolerance group the customer is assigned to (field' technical name is LFB1-TOGRU.
    Regards,
    Satish Muvva.

  • The entry FBZ4 S  is missing in table T021V

    HI
    I am doing the service tax thorugh f-58 , there i am geeting this error.
    The entry FBZ4 S  is missing in table T021V.

    Hi,
    I think you have not maintained the t. code for payment.
    Go to SM30. Enter the table name V_T021V. Click on Change button. Maintain the entries for FBZ4, Account Type S.
    I hope this will solve your problem.
    Regards,
    Jigar

  • F110 -In table T074U, the entry K   is missing

    Hi All,
    I am trying to process an item with Sp.GL indicator through payment run F110. I am geting following error message in the proposal log
    "In table T074U, the entry K   is missing". This table gives me all the Sp. GL indicators with the relevant config value. And for the related Sp. GL indicator I have checked that entry K is defined in the table T074U for the relevant Sp. GL indicator.
    In the Payment run config (FBZP) - All company codes. the relevant indicator is entered in the field "Special GL indicator to be paid". And I have checked that the relevant alternative recon account for this special indicator is defined correctly and the special indicator is not marked as noted item as well. So, I have no clue
    Please let me know what is the solution.
    Thanks
    Ron

    Hi
    Configuration for the Sp Gl indicator is correct. And i am able to find out the reason for discussed error. Actually, a substitution was deleting the Sp. Gl indicator from the line item after the posting. So, when F110 was trying to do the payment it sees an item with Sp. GL posting key but was not able to find the Sp. GL indicator which got deleted before by the substituion. So, there was not a way to find the alternative recon account for posting for the payment run.
    Thanks
    Ranjit

  • In table T159L the entry 1111 is missing

    HI All,
    When I tried to do Production Receipt with MB1C, I have got the below error.
    in table T159L the entry 1111 is missing. (1111 is my plant)
    Pls advice.
    Niranjan

    Hi Niranjan,
    Please check in SPRO>Materials Management>Inventory Management and Physical Inventory>Plant Parameters.
    I don't think that the Plant creation is missing in OX10, because message clearly says Plant 1111 does not exist in Table.. so it is clear that Plant is existing in OX10.
    Regards,
    SAPFICO
    Edited by: SAPFICO on Mar 24, 2011 9:21 AM

  • Which field ,table gets the entry when we refresh cube statistics

    Hey,
    I just want to know  into which field or table entry is made when we Refresh statistics using the manage tab of the Infocube.. I saw the fields of the table RSDCUBE , there are two includes as given below and their fields, Im noy able to quite figure out which field gets the entry when i click on refresh statistics button in the Performance tab.
    1) RSDCUBEDBFLAGS (InfoCube: DB Performance Flags): which has the following fields namely
    CLEAR_INDEX     Boolean
    DELTA_INDEX     Boolean
    REBUILD_STAT     Boolean
    DELTA_STAT     Boolean
    PERCENTAGE     internal use
    NULLCOMP     Zero elimination in the summarization module
    COMP_DISJ     Flag: only disjunct records
    REFUPDATE     No update of the non-cumulative marker
    2)RSDCUBEBWSTAT (InfoCube: BW Statistics)
    BWSTATISTICS     Boolean
    BWSTATWHM     Boolean
    However , when i click on refresh statics, there is a job which runs from my id which triggers the program RSDSTAT1 with variant as the cube name..
    its kinda urgent...  helllpp
    Thanks,
    vaish

    Hey,
    I just want to know  into which field or table entry is made when we Refresh statistics using the manage tab of the Infocube.. I saw the fields of the table RSDCUBE , there are two includes as given below and their fields, Im noy able to quite figure out which field gets the entry when i click on refresh statistics button in the Performance tab.
    1) RSDCUBEDBFLAGS (InfoCube: DB Performance Flags): which has the following fields namely
    CLEAR_INDEX     Boolean
    DELTA_INDEX     Boolean
    REBUILD_STAT     Boolean
    DELTA_STAT     Boolean
    PERCENTAGE     internal use
    NULLCOMP     Zero elimination in the summarization module
    COMP_DISJ     Flag: only disjunct records
    REFUPDATE     No update of the non-cumulative marker
    2)RSDCUBEBWSTAT (InfoCube: BW Statistics)
    BWSTATISTICS     Boolean
    BWSTATWHM     Boolean
    However , when i click on refresh statics, there is a job which runs from my id which triggers the program RSDSTAT1 with variant as the cube name..
    its kinda urgent...  helllpp
    Thanks,
    vaish

  • In table T030R the entry #### SKE is missing

    Does anybody know how to configure the automatic account determination rules to populate this table for this specific transaction (SKE)?  I am seeing this as an error message and am trying to further understand the background on the root cause of this error message.

    Hi,
    Go to FBKP, choose 'Automatic postings' and maintain accounts determination for 'Cash discount and payment differences'.
    Regards,
    Eli

  • Does deletion of a document also deletes the entries in audit tables?

    Hi,
    Can anyone tell me that if a document is deleted from UCM (say it's archived and then deleted) will this also remove all the audit trails and entries in other tables(docmeta,revisions,workflowhistory.. etc) as well?
    Also if there are custom tables , will the entries be deleted automatically? How does this work?
    I have to generate reports for the documents that are not archived.
    Regards,
    saumya

    Hi,
    Tables like Workflow History need to persist these content items as its purpose is totally different. If a admin wants to know how many content went through a particular workflow, this is the table he could refer to and also know who approved them. It is up to you to truncate records in these tables depending upon the organization need. You can for example truncate records older than 5 years from these tables.
    Regards,
    - Anand

  • How Can I Export A Table With Its Entries ( values )

    Hi guys,
    How can i export a table with the entries that the table is populated with ??!!
    Best Regards,
    Fateh

    To export a table and its data you can do it a number of ways.. Do you have access to SQL Developer? If not you can do it through the APEX SQL Workshop..
    Under SQL Workshop, Utilities, Data Unload, To text (or XML, whichever you are more comfortable with..).. Select your schema, click next button, select the table, click next, select the columns you want exported (select ALL ITEMS in the select List), click next, on optionally enclosed by I usually enter a " (Sometimes I have long strings in columns), click the include column names checkbox to get the column names at the top of the document, click unload data button..
    To get the ddl (code to build table) Sql Workshop, utilities, generate ddl, create script, select schema, select next, click table checkbox, select next, click the checkbox of table you want to get ddl for...
    Thank you,
    Tony Miller
    Webster, TX
    There are two kinds of pedestrians -- the quick and the dead.
    If this question is answered, please mark the thread as closed and assign points where earned..

  • How to delete the entries in CDCLS table

    Hi All,
    There is a potential issue with the size of table CDCLS on production system. We need to reduce or manage the amount of data in this table. CDCLS is a cluster table and cannot be reduced directly,
    So first we were reduced the entries in CDHDR and then from CDPOS tables.
    After that we tried to reduce the entries from CDCLS table through the program - RSSCD7RE, We are facing the error as - no data available and No active archive key was selected.
    Please help me out, how to proceed further in this task. Thanks in advance.

    Go to DB15 and see the archiving object.
    You can also use the archiving object CHANGEDOCU, please refer SAP documents for that.
    Transaction is
    SARA -> Archive object CHANGEDOCU
    Message was edited by:
            ANIRUDDHA DAS

  • How to add the entries and how to delete the entries from custom Z-table?

    Hi Experts,
    My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
    Here how to add the entries from program to Z-table.???
    And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
    Could you please guide me the logic how to crack this???
    Let me know if you need more Info
    Thanks
    Sanju

    Hi Sanjana,
    What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
    *Insert Statement
    INSERT dbtab
    Syntax
    INSERT { {INTO target VALUES source }
           | {     target FROM   source } }.
    Effect
    The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
    System Fields
    The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
    sy-subrc Meaning
    0 At least one row was inserted.
    4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
    The INSERT statement sets sy-dbcnt to the number of rows inserted.
    Note
    The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
    *Modify Statement
    MODIFY dbtab
    Syntax
    MODIFY target FROM source.
    Effect
    The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
    System fields
    The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
    sy-subrc Meaning
    0 At least one line is inserted or changed.
    4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
    The MODIFY statement sets sy-dbcnt to the number of processed lines.
    Note
    The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
    Hope it helps...
    P.S. Please award points if it helps...

  • How to delete the entries from NAST table

    Hi,
    Please help me out by providing any function module that delete's the entries from hte NAST table.
    Regards,
    Kiran.L

    REPORT ZSCD_TEST13.
    delete from nast where VSTAT = '1'.
    =====
    If you see the FM : NAST_DELETE_OBJECT, its only useful when NACHA = 7 (i.e. message transmission medium = Simple Mail)
    For others its not useful.
    We had similar issue few days back and after long RnD, we straightaway deleted the entries using the Zprogram.
    regards,
    Edited by: Pranu Pranu on Aug 19, 2008 1:42 PM

  • How to delete duplicate entries in table for the object DNL_CUST_BASIS2

    Hi All,
    I am trying to download the object DNL_CUST_BASIS2.
    In the SMQ2 the status is SYSFAIL.
    I checked in the ST22 for dumps.It says about the error while accessing the table T006.
    While analysing this,i found some duplicate entries in the related tables of this object.
    Can somebody help me how to delete these duplicate entries?
    Thanks,
    Senthil.

    Delete them directly from the table using se16:
    select the entries in the classic view (not ALV or grid view).
    activate the debugger.
    press the view button. --> you'll enter in the debugger
    press F7
    locate the sy-ucomm variable & change it to "DELE".
    press F8
    delete the entries.
    Trick-shots
    but it works!
    Michael.

Maybe you are looking for

  • HP OfficeJet 6500A all in one Printer . No European size envelopes apart from C6 on the printer.

    We have the OfficeJet 6500A All In One Printer. It is on a network to two computers one using Windows Vista and the other Windows7. It seems strange that the only size of envelope for the European Market is a C6. There is no facility for customising

  • Want to give them a new idea´s

    Hello I have used iTunes now as a player for my songs and as well some video´s for some time but i have allways needed something more with those updates and wy not give the idea then just sit on it. Now you have the player and it needs something that

  • 2 Vat nos in vendor master data.

    Hi I want to know what is the functionality and impact when I put 2 VATnumbers on 1 supplier Can be same in 1 country or VAT number from European supplier where we want to add the VAT number of his transporter that is situated in another country. Ple

  • How to write it in ABAP?

    I wish to delete all those records from my internal table where bktxt <> 'UP' or 'up'. How will I write it in ABAP? pls suggest. Regards, Alok.

  • Package service responds with E_PACK_UNKNOWN_FILE_TYPE to an almost valid PDF

    Some PDFs cause Package service to respond with E_PACK_UNKNOWN_FILE_TYPE. The files are "almost valid" in a sense that they can be opened and displayed by both Acrobat Reader and OS X Preview. But they are not spec-compliant. First few lines in these