In the last week i hooked up my ipod to change songs, now i can't get itunes radio to play any stations.  How can i fix that?

i can't get itunes radio to play since i hooked up and synced my ipod.

Grayed out whee? Computer? On iPod?
If in iPod that means the music files got corrupted and are lost.
You can redownload most iTunes purchases by:           
Downloading past purchases from the App Store, iBookstore, and iTunes Store        

Similar Messages

  • In the last week my Imac (OS Lion) has started opening two to seven programs every time I log in.  Why?  How do I stop it?

    In the last week my Imac (OS Lion) has started opening two to seven programs every time I log in.  Why?  How do I stop it?  I think it started after I was led to do something I can't remember with Terminal.app.

    If they have open windows/documents from your last use of the application, try going to System Preferences/General and check the 'Close windows when quitting application'.

  • The volume control has disappeared from the music app on my iPhone and i can't play any music how do i fix this?

    The volume control has disappeared from the music app on my iPhone and i can't play any music how do i fix this?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

  • My family shares an apple id so we can share music, etc.  With the update, we are all getting texts from each other, etc!  How do we fix that?

    Our family shares an apple id.  How do we have separate names for separate users?

    Hello cmdenham97
    The question I have is how are using your Apple ID on both of the iPhones. If it is just for purchases, then you can just have that Apple ID for purchases and then have separate accounts for iCloud to sync that data. Check out the article below for more information.
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Regards,
    -Norm G.

  • My iTunes isn't playing a movie, how do I fix it? I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program.

    I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program...how do I fix this???

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • I pulled the bookmarks html file off of my computer after it crashed, and am trying to get my old bookmarks into firefox. How does one do that?

    When my computer crashed, we managed to recover a bunch of the files and information from it. One of the files we pulled was the bookmarks.html from the firefox folder. The computer was running on Vista when it crashed, and I now have it running 7 Professional. The file is recorded as a Chrome html file on the new computer, and when I click on it, it pulls up a basic html page within Chrome or firefox that has links to the firefox website (kind of like a webpage version of the bookmarks folder from the toolbar, but without any of the bookmark adding capabilities). I'd like to get my old bookmarks loaded into firefox. Help?

    Firefox hasn't used the '''bookmarks.html''' file for storing bookmarks since the Firefox 2 versions, in 2008. Later versions use '''places.sqlite''' for bookmarks and history. What you have is the default file that Firefox uses on new installations and new Profiles, which has like 6 bookmarks.
    If you still have access to that old hard drive, see this for help: <br />
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • I moved to a new house and we kept the same wifi but my current location won't change and now it can't even find my location at all!?

    How can I fix this it is screwing up Siri and everything.

    For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that Apple has not yet updated their database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
    Just make sure the users with iPhones visit you and connect o your wifi.

  • My speaker jack broke of and is still in the headphone jack in my imac  and i have no sound now. Can I fix

    My cord for my speaker broke of and a part in still inside the headphone jack(and the back of my i mac) so I have no sound now. is this something I can fix or do ihave to take in

    It is better to take the computer to the Apple store to have it removed.
    Genius Bar reservation:
    http://www.apple.com/retail/geniusbar/
    Best.

  • Over the last week my Firefox has been crashing whenever i close games and sometimes in the middle of them. What is going on??

    I got a new rogers box and I had a Norton Security installed and since then the games like farmville and cityville have been crashing on a regular basis. I have called about the Norton 3 times, and i tried the Internet wireless and wired and nothing has changed so I don't know what else they can do. Is there something wrong with the flash player over the last week????

    It seems to be a common complaint. Norton Security does not play nicely with Firefox (or IE).

  • TS1424 Has anyone had a problem purchasing movies in the last week? I get a message say that my purchase was not complete and to contact itunes support.

    Has anyone had a problem purchsing movies from iTunes in the last week? Everytime I try to buy a movie or TV show I get a message from iTunes saying "You purchase was incomplete please contact www.apple.com/support/iTunes/ww/." which is no help, still waiting for help!

    If you haven't contacted iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why you are getting the message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Is there a reason that Skype quit workin on my macbook pro in the last week?  Microsoft went their messenger to it, so is there something there?

    I have a macbook pro, in the last week, i have lost the use of skype. is there a reason? has it something to do with Microsoft setting their msn up there?

    Well, running on a 2006 model.  I did not have a startup disc.  Initially, it booted up on original software in 2006.  Since then, I've upgraded to 10.6 via a box set.  And, since then I think I popped it up to lion. 
    All I have on a disc is snow leopard.  And, I can't get farther than the setup screen due to hard drive.  I'm taking to a apple authorized repair store right now.  We'll see what they tell me .  I'm just going to weigh the cost of repair vs. buying new.
    Another bad, stupid thing is I had no means of backing up my stuff.  So, I might have lost things like music, vids, etc.  we'll see if they can recover.  If the cost is too much for repair I might just forget it and start over with a new system.  Just not sure at this point.

  • My four-month-old macbook pro's battery when fully charged is now down to 2 hours life from 7...in the last week. Why?

    I bought my macbook pro 13" about four months ago and have been in love with it ever since - especially as compared to my old PC laptop, the battery stays cool and lasts forever when I am working. Best charge was 7 hours. However, in the last week I have noticed the battery suddenly becoming hot when I unplug the charger, and the best length of time I can get on a full charge is 2 hours.
    I have made sure all the settings are for prolonged battery life - which they've been since I first set up - and turned off all programmes running in the background, but this has not made any difference. I have been using iMovie a lot lately which takes a lot of battery which is probably why I didn't notice the battery being low as it automatically seems to make the battery slump to 2 hours when it's on. It's off now, and my battery won't improve.
    I have also now followed the instructions (below) about calibrating, but this has had no effect. My housemate bought the same model a month ahead of me, uses it probably slightly less, but his is still 7 hours for a charge.
    Is my battery faulty?
    Calibration instructions used:
    PowerBook G4 (15-inchDouble-Layer SD), MacBook (all models), MacBook Pro (all models), and MacBookPro (17-inch) (all models)
    Thebattery calibration for the PowerBook G4 (15-inch Double-Layer SD) and anymodel of MacBook or MacBook Pro has been updated because of a new batteryreleased with this computer. With these computers, follow these steps tocalibrate your battery:
    Plug in the power adapter and     fully charge your PowerBook's battery until the light ring or LED on the     power adapter plug changes to green and the onscreen meter in the menu bar     indicates that the battery is fully charged.
    Allow the battery to rest in the     fully charged state for at least two hours. You may use your computer     during this time as long as the adapter is plugged in.
    Disconnect the power adapter while     the computer still on and start running the computer off battery power.     You may use your computer during this time. When your battery gets low,     the low battery warning dialog appears on the screen.
    At this point, save your     work.  Continue to use your computer; when the battery gets very low,     the computer will automatically go to sleep.
    Turn off the computer or allow it     to sleep for five hours or more.
    Connect the power adapter and     leave it connected until the battery is fully charged again.
    Tip:When the battery reaches "empty", the computer is forced into sleepmode. The battery actually keeps back a reserve beyond "empty", tomaintain the computer in sleep for a period of time. Once the battery is trulyexhausted, the computer is forced to shut down. At this point, with the safesleep function introduced in the PowerBook G4 (15-inch Double-Layer SD)computers, the computer's memory contents have been saved to the hard drive.When power is restored, the computer returns itself to its pre-sleep stateusing the safe sleep image on the hard drive.

    Thanks Sig. The information is here: Anything useful stand out?
    Battery Information:
      Model Information:
      Serial Number:    9G1130CJVD3MA
      Manufacturer:    DP
      Device Name:    bq20z451
      Pack Lot Code:    0000
      PCB Lot Code:    0000
      Firmware Version:    0201
      Hardware Revision:    0002
      Cell Revision:    0158
      Charge Information:
      Charge Remaining (mAh):    5663
      Fully Charged:    Yes
      Charging:    No
      Full Charge Capacity (mAh):    5663
      Health Information:
      Cycle Count:    59
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    261
      Voltage (mV):    12574
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    10
      Wake on AC Change:    No
      Wake on Clamshell Open:    Yes
      Wake on LAN:    Yes
      Current Power Source:    Yes
      Display Sleep Uses Dim:    Yes
      Battery Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    2
      Wake on AC Change:    No
      Wake on Clamshell Open:    Yes
      Display Sleep Uses Dim:    Yes
      Reduce Brightness:    Yes
    Hardware Configuration:
      UPS Installed:    No
    AC Charger Information:
      Connected:    Yes
      ID:    0x0100
      Wattage (W):    60
      Revision:    0x0000
      Family:    0x00ba
      Serial Number:    0x00262704
      Charging:    No

  • How create a variable in the TVARVC that calculate the last week

    Hi Gurus,
    i need create a Variable in the table TVARVC that calculate which was the last week to run a Program in BW,  i have no idea how can i do it, where do i must start? please can you tell me step by step, i will really appreciate it

    This blog should help you create a variable in TVARVC table:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9075b11a-6e43-2c10-b7be-cfa0e97ec0cc?quicklink=index&overridelayout=true
    you can leave out the information broadcasting part. But can you elaborate what exactly is the requirement.

  • I have purchased recent songs and within the last week my iPod is no longer synching with iTunes.  I have all the recent downloads.  Help!

    I have purchased recent songs on iTunes within the last week and now my iPod is not synching with recently purchased songs.  I have all the current updates.  Help!

    Hi there seanstrvln,
    Welcome to Apple Support Communities.
    It sounds like there’s an issue syncing recently purchased music from iTunes on your computer to your iPod nano. Take a look at the article linked below, it’ll walk you through the process of selecting the music that is synced to your iPod and displaying music that has already been synced to the device.
    Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
    So long,
    -Jason

  • My Computer has been freezing all of a sudden in the last week and i have to keep doing force shut downs!!!

    My dad usually helps me fix this stuff, well go figure he is on vacation and a day after he leaves, the computer starts giving me problems. im so angry with it right now i might throw it off my balcony...
    The loading icon randomly starts spinning sometimes and wont stop, requiring me to do force shut downs in order to make the computer usable again.  sometimes it does it right away, sometimes it does it after ive been using the computer for a bit... for a while i can switch windows until it completely freezes.  i cant click anything, cant force quit any programs or anything, and i the spinning beachball never goes away!  the computer isn't hot either when it crashes! SO FRUSTRATING! it was perfectly fine until the last week or so. im anything but a computer genious, but i ran the disc utility and it says the drives are fine.  things ive done in the last week.  done the updates that the app store was pestering me with, updated corel painter 12 with the most current patches because that started randomly crashing. well now painter works and its the computer crashing X.x
    I dont have extensions on my safari aside from adblock. and i only have 2 apps downloaded and corel painter is the only software on the mac side of the computer.  parallels has an adobe suite on it but Corel is the only thing that has gone through changes recently... 
    i dont know what to do... i need to work on projects and the computer keeps making me lose progress and keeps giving me frustration. please help if you can...
    I've never used the forums before so i don't know the right category, but if its wrong im sorry.  if you can just move it into the right one...

    Back up all data immediately, if you haven't already done it.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Maybe you are looking for

  • Sharing SharedObjects between multiple .swfs

    Relatively simple problem; I have a project that I think may be more manageable if I break it up into multiple small .swf files rather than having a gargantuan mega .swf. Now, I know that I could use a root .swf and load data from the others, but I t

  • Close OVS Help via Button in Web Dynpro for ABAP

    Hello! Is it possible to use a close-button in a "ovs help popup"? I tried to fire a "Type-Exit Outbound-Plug" of window controller of the "ovs help window" but it didn't work. Thanks for help Joerg

  • SC Workflow Status

    Hi, We have SC approval workflow and are using SRM 4.0. Someone has created SC and approval for SC has been rejected. Then SC is mofied and now its been approved. When SC is approved, the status of SC is still at the status' Waiting for Approval' and

  • Merge 15 applications to ONE - a mess?

    Hello everybody! I created 15 apps that does basically the same but with different content. I subbmited them and got rejected for the reason that they all look the same and I should use the Inn-App method. As first step I want to ask few questions: 1

  • Preview external css stylesheet

    I open two pages, both linked to the same external stylesheet .In design view, the first appears with the CSS stylesheet's specs, the other without. How do I set the second one so it appears too with the stylesheet specs? Thanks for the help. Mark