In the read_text function module,  how to find the  lines

The coding follows like this,
call function 'READ_TEXT'
       exporting
            client                  = sy-mandt
            id                      = id
            language                = sy-langu
            name                    = name
            object                  = object
       importing
            header                  = header
       tables
            lines                   = tab
       exceptions
            id                      = 1
            language                = 2
            name                    = 3
            not_found               = 4
            object                  = 5
            reference_check         = 6
            wrong_access_to_archive = 7
            others                  = 8.
can u provide me with the correct data form which i can read the lines.

I think this code will help you to read the lines
*--LOCAL VARIABLES
  DATA : LV_NAME TYPE THEAD-TDNAME,
         LV_TEMP(128) TYPE C      ,
*--Structure to Hold the Header Data for Func Modules
*--Read_text
         X_HEADER TYPE THEAD      .
  CLEAR  : LV_NAME     ,
           LV_TEMP     ,
           V_IND_FG    ,
           X_HEADER    ,
           IT_TLINES   ,
           IT_TLINES[] .
  LV_NAME  = P_DELV_NO .
  X_HEADER-TDOBJECT = 'VBBK'.
  X_HEADER-TDNAME   = LV_NAME .
  X_HEADER-TDID     = 'ZMAN'.
  X_HEADER-TDSPRAS  = 'E'.
  CALL FUNCTION 'READ_TEXT'
       EXPORTING
            CLIENT                  = SY-MANDT
            ID                      = X_HEADER-TDID
            LANGUAGE                = X_HEADER-TDSPRAS
            NAME                    = X_HEADER-TDNAME
            OBJECT                  = X_HEADER-TDOBJECT
       TABLES
            LINES                   = IT_TLINES
       EXCEPTIONS
            ID                      = 1
            LANGUAGE                = 2
            NAME                    = 3
            NOT_FOUND               = 4
            OBJECT                  = 5
            REFERENCE_CHECK         = 6
            WRONG_ACCESS_TO_ARCHIVE = 7
            OTHERS                  = 8.
  IF SY-SUBRC <> 0.
     ERROR.
    CLEAR :IT_TEXT,
           IT_TEXT[] .
    V_IND_FG = 'X' .
    EXIT .
  ENDIF.
  LOOP AT IT_TEXT .
    IT_TLINES-TDFORMAT = '*'.
    IT_TLINES-TDLINE = IT_TEXT-LINE.
    APPEND IT_TLINES.
    CLEAR  IT_TLINES.
  ENDLOOP.
Thanks,
Koshal

Similar Messages

  • How to make use of SE37- Function Module & how to find out the table?

    Hi ,
    1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
    For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
    But after giving the particular name what should i do?
    Please help me.
    2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
    Thanks in adavnce for spending some time
    Raj.S

    Hi Raj
    Function Modules
    Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
    Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating  and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
    Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
    The Function Builder  also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
    Check this link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
    You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
    By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

  • Finding the master user records , how to find the active users

    Hi friends,
      i want  master user information, which table consists master user information and also which table consists active users ,
    like address ADRC is the master table like that for users which is the master table .
    can any one help me urgently.

    Hi,
    check the below tables
    USR01                          User master record (runtime data)
    USR02                          Logon Data (Kernel-Side Use)
    USR03                          User address data
    USR04                          User master authorizations
    USR05                          User Master Parameter ID
    USR06                          Additional Data per User
    Edited by: Velangini Showry Maria Kumar Bandanadham on Apr 24, 2008 3:31 PM

  • How to find the nearlest value in 1-D array ?

    Hi.. everybody..
    I need to seperate the raw data(1-D) into 2 group of array by the center value and then make the average value in each array. But I also still have the problem about if the center value is not the same of some value in the 1-D array. I cannot use the split function.
    "How to find the nearlest value to the center point that I calculated, in the 1-D array ?"
    Thanks a lot for anybody help

    In a general sense, since I'm not sure what your data values are or how far away your calculated center is from the true value, I would do it one of two ways:
    1) Use a threshold value and scan the array until the threshold is reached (assumes constantly increasing values in the array).
    2) Use either a) round to nearest integer b) round to + Infinity (round up) or c) round to - infinity (round down). If you don't have decimal values, you'll have to devide the values by a power of 10.
    2006 Ultimate LabVIEW G-eek.

  • How to print text rertrived by using the READ_TEXT fun module in smartform

    Please tell me how to print the text which is rertrived by using the READ_TEXT function module in smartform.
    I have coded all things in the program lines and in that i am retriveing the long texts.
    I am getting the text lines in my internal table clearly, the thing is that I am not able to pass these lines to the text module.
    its urgent. Points will be rewarded for any type of clue. whether it will work or not.

    loop the table into which u have retrieved the text .
    in the form interface of the smartform ... in importing parameter give the that table name .
    and in smartform whereever u want to print there insert the data into work area and pass to fields for dispaly .
    decalre ur work area in global defintions
    thnaks .

  • How to find the Standard Program associated with a Standard IDOC

    Hi,
          I am going work on enhancing the standard IDOC. Any body can suggest how to find a standard pogram associated with a Standard IDOC. And can any body send some exaple code for extending a standard IDOC and to implement the logic in the standard program .....

    Hi,
    For outbound IDoc the program can be found:
    1) For master IDoc via transaction BD60. Here for the message type you can find the function module used to generate the IDoc. Within this function module you can find the user exit where you can code your logic.
    2) For IDocs with message control (output control) we maintain settings for proces code in WE41. This process code will lead to outbound IDoc generation program.
    For Inbound IDoc the program can be found:
    Via WE42 where inbound process and its related inbound function module is maintained.
    In each cases above we can go the function module and find the customer exit where idoc enhancement logic can be coded.
    For extending IDoc look at the following links:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm">Extending IDoc - SAP help</a>
    It can be summarized as follows:
    Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
    - Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
    - Click on Create new and enter a description and press enter.
    - Click on ZIDOCTYPE01 and then on the Create icon.
    - Enter ZIDOCTYPE as the segment type, click on Segment Editor.
    - Enter a description for your segment type and create.
    - Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
    - Save and generate, press back
    - To release the segment choose Goto, Release from the menu.
    - Check the box on the line of your segment.
    - Save, back and enter.
    - Your Idoc type structure should be displayed with your new segment.
    - Save and back.
    - To release the Idoc type choose Extras, Release type from the menu and Yes.
    Hope this helps.
    Regards,
    Gajendra.

  • Change the standard function module

    The standard function module FI_DUPLICATE_INVOICE_CHECK will check whether an invoice/credit memo has already been posted where all of the following attributes match: Company code, vendor, currency, document date, reference number (If a reference number was entered in the current invoice/credit memo). If no reference number was entered in the current invoice/credit memo the system checks whether an invoice/credit memo has already been posted where all of the following attributes match: Company code, vendor, currency, document date, amount in document currency
    my requirement is
    The above functionality described in the short description doesn’t provide for the need within AP to check on duplicate invoices. The functionality in FI differs from the functionaltiy provided in LIV and therefor needs to be aligned. The risk of posting duplicate invoice entry is eminent since the check is dependent on all parameters. For a good duplicate invoice number check we need FI to check on Vendor and invoice reference within the same fiscal year. To modify rules, copy FI_DUPLICATE_INVOICE_CHECK, modify the checks and then call the copied function module from FB60. The remaining field check in the standard function module should be deleted.
    how  to achive this. i didn't understand the requirement .Please give me any suggestion for this.

    Hi ,
    I think what you are saying is the functionality given in Logistics Invoice verification is not suitable for FI Invoice.
    If I am correct , then there is a configuration setting in SPRO where you set check for duplicate invoice. It has just three checkboxes
    a) Company code b) Reference number c) Invoice date
    so I think this configuration setting will suffice your requirement.
    Please let me know.
    Amit

  • How to find the transaction code for the particular program or include

    Dear All,
    Please help me on this queary.
    1) How to find what is the transaction assigned for the particular Report
    2) How to find the particular include is used in which programs and also transaction codes
    I have one ZProgram that contains only includes no selection screen, I have to find where this program is used, in that one include is ther I would like to know in which program and in which transaction that is used,
    They have given ME9F, ME21N/22n, wheren this includle is calling.
    Please kinely help on this.
    Thanks and Regards,
    Muralikrishna

    HI
    1. you can find the transaction for your report by opening in se80. On the left side window it will show the transaction if there is any.
    2. to find in which programs particular inclue is called , just open include in se38 and press where used list icon. in the pop up window select programs.
    regards
    vijay
    reward points if helpful

  • Need to know the standard function module/program in E recruitment

    Hi All,
    I need to know the standard function module/programm that defaults the 'Functional area' field in the posting page from the requisition page.
    Early responce is greatly appreciated.
    Thanks and best regards
    Rajeev

    Hi Masa,
    Thanks for your reply.
    We are using Assets with the integration of Project systems. We are now in 4.6C R/3 & SRM 5.0 system. And now R/3 upgrade and SRM upgrade going on smultaniously to ECC6.0 and SRM 7.0 respectively.
    I would like to know any new functionality available in the latest upgrades and we have done lot of customization for Asset Procurement. And would like to go with Vanilla.
    Can you please provide me some inputs about the Project (WBS element ) based Asset Procurement in SRM as standard.
    Thanks and Regards,
    Ramesh

  • WHAT ARE THE UPDATED FUNCTION MODULES

    Hi Friends,
    Can anybody explain me about UPDATED FUNCTION MODULES (types of function modules)

    Hi
    Update Function Module
    Unlike transactions and executable programs, dialog modules do not start a new SAP LUW. Calls to update-task function modules from a dialog module use the same update key as the ones in the calling program. The result is that calls to update function modules from a dialog module are executed only if a COMMIT WORK statement occurs in the calling program.
    If you place a COMMIT WORK in a dialog module, it does commit changes to the database (for example, with UPDATE).However, it does not start the update task. The function modules are not actually executed until a COMMIT WORK statement occurs in the calling program.
    If you use dialog modules, try to avoid including calls to update function modules in subroutines called with PERFORM ON COMMIT. In general, any occurrence of PERFORM ON COMMIT(with or without update-task function calls) in a dialog module can be problematic.
    This is because dialog modules have their own roll area, which disappears when the module finishes. Consequently, all local data (including data used for parameter values when calling an update function module) disappears as soon as the commit in the main program is reached.
    If you must use this method in a dialog module (i.e. include the call to an update-task function in a subroutine), you must ensure that the values of the actual parameters still exist when the update-task function actually runs. To do this, you can store the required values with EXPORT TO MEMORY and then import them back into the main program (IMPORT FROM MEMORY) before the COMMIT WORK statement
    Creating Update Function Modules
    To create a function module, you first need to start the Function Builder. Choose Tools ® ABAP Workbench, Function Builder. For more information about creating function modules, refer to the ABAP Workbench Tools documentation.
    To be able to call a function module in an update work process, you must flag it in the Function Builder. When you create the function module, set the Process Type attribute to one of the following values:
    Update with immediate start
    Set this option for high priority ("V1") functions that run in a shared (SAP LUW). These functions can be restarted by the update task in case of errors.
    Update w. imm. start, no restart
    Set this option for high priority ("V1") functions that run in a shared (SAP LUW). These functions may not be restarted by the update task.
    Update with delayed start
    Set this option for low priority ("V2") functions that run in their own update transactions. These functions can be restarted by the update task in case of errors.
    To display the attributes screen in the Function Builder, choose Goto ® Administration.
    Defining the Interface
    Function modules that run in the update task have a limited interface:
    Result parameters or exceptions are not allowed since update-task function modules cannot report on their results.
    You must specify input parameters and tables with reference fields or reference structures defined in the ABAP Dictionary.
    http://help.sap.com/saphelp_nw70/helpdata/en/41/7af4daa79e11d1950f0000e82de14a/frameset.htm
    Regards,
    Harish

  • Unable to create rule Error:Function Module does not meet the workflow conv

    Hi Workflow experts,
    Could any one help me with rule creation. Below is my Function Module Interface.
    ""Local Interface:
    *"  TABLES
    *"      AC_CONTAINER STRUCTURE  SWCONT OPTIONAL
    *"      ACTOR_TAB STRUCTURE  SWHACTOR OPTIONAL
    *"  EXCEPTIONS
    *"      NOBODY_FOUND
    The function module test is successful with all required conventions for workflow but while i try to create a rule with the funtion module i get the error "Function Module does not meet the workflow conventions"
    I Also have included the following in FM
    INCLUDE <cntn01>.
    Any suggestions would be helpful. Thanks in Advance,
    Imran

    Hi,
    I am not sure whether the rule accepts the optional flag. Remove the optional flag for the tables parameters and try again. According to the documentation you have implemented the right interface. It might be the issue with the tables parameter being optional.
    Hope this helps,
    Sudhi

  • How to find the related PI document from a material document

    Dear All experts,
        If I know the materil document number, how to find the related PI document?
    Thanks!
    Xinling

    Hello Xinling,
    You can extract the details from table MSEG.
    Regards
    Kalpana

  • HOw to find the BAPI function module

    Hi all,
    I have a field called IEVER in table EIKP.
    How to find the related BAPI function module and BAPI structure for this filed.
    Thanks in advance
    KP

    Hi KP,
       can you tell us the name of the transaction in which you saw this field?
    If it is in PO Creation or Change you can probably look at the bapis
    BAPI_PO_CREATE or BAPI_PO_CHANGE
    Regards,
    Ravi

  • How to find the Obsolete function module in ECC 6.0

    Hi Guys,
    How we can find the all obsolete function in ECC 6.0, is any T-code to finding the obsolete function modules, or any other way to find.
    Could you please help me.
    Thanks,
    Gourisankar.

    Hi Gouri,
    If you are looking at determining whether a single FM is obsolete or not is by this method:
    Go to FM in SE37 -> Goto Attributes Tab -> General Data section -> look above the Edit Lock field ... where SAP places the release status and date of the FM, if the FM is obsolete, the text Function Obsolete appears
    This is one way of finding out one FM @ a time
    However if you want to check on a mass scale, I dont have a SAP system here hence cant confirm, however, all FMs are stored in TFDIR database table. Please scroll through the fields of the DB table to check whether any field relates to release status or the like. If it does, then from SE16, you can put the value corresponding to "Obsolete" in the field and run to check all FMs.
    Cheers,
    Aditya

  • How to find out the inbound function module in the extended idoc

    Hi,
    how to find out the inbound function module in the extended idocs
    Thanks .

    through we41/we42 you can find the inbound function module.......
    or
    thorough we19(idoc test tool) ....
    give the input as message type or basic idoc..
    press exec...
    then you can find th button on application tool bar as inbound funtion module....
    from here also you can find..........
    <REMOVED BY MODERATOR>
    Khasimsa
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

Maybe you are looking for