In the report level user wants two persons against each work center.

Hi Experts,
Please let me know the solution, I have provided scenario below.
check the query which the user is referring to report:
Example
Work center     Person
KNE33102     44003850
According to the user, the names for the Work centers should be as follows:
Work center          Person
KNE33102         44003850,
KNE33102        44003603
I have check the data in T-code-CR03, each work center getting two persons, as can be shown below.
Work center        Person
KNE33102           44003850,
KNE33102           44003603
In RSA3 it can be seen that both the records are being extracted
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
In BI , when checking in PSA, it can be seen that the data is also being loaded to BI (Two persons loaded against Work center-KNE33102)
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
But when loading to the Info Object, one person has deleted. Because of this, in the report level displaying one person.
Note:-Please let me know what is the procedure, in the report level user wants two persons against each work center.

Hi,
As you said in your post the data has mentioned up to 2009. can you try execute the query till to date .
Regards
sivaraju

Similar Messages

Logic at reporting level to compare two dates .

Dear Friends,
I have a scenario here , where i have a counter keyfigure in my DSO which has constant value 1 . there is two dates : Stock issue date & stock receipt date . At the reporting level , in selection screen there is an input on stock receipt date . Now i want to show key figure counter for which stock issue date lies between the stock receipt date which the user enters .
Kindly suggest on this matter .
Thanks & regards,
Ashutosh Singh

1. Create a customer exit variable on Stock issue date. Pass on the value the user enters through exit to this variable.
2. Create a New formula with the counter keyfigure and restrict it based on the customr exit variable.
This will work correctly if Stock issue date and stock receipt date are not displayed in the report.
If it is displayed, then if the stock issue date lies between the stock receipt date it will have the value as 1 else 0.
Hope this helps.
rgds, Ghuru

Cannot implment security setting on the report level - SSRS 2012

Hi All:
I am having a weird problem on my SSRS 2012 reporting portal, I cannot click any of the drop down list like the example below. Is there anything from the setting?
It is not only about the reporting level, any arrow on the reporting server, like data source, are kind of dead as well.
Please kindly help and thanks in advance.
Cheers
Johnny

Hi JohnnyKahWang,
According to your description, you can view folders and reports on report manager, but you could not click any of the drop down list.
Reporting Services uses role-based security to grant user access to a report server, and there are two types of roles: Item-level roles and System-level roles. Access to reports, folders, models, shared data sources, and resources is controlled through item-level
role assignments. Each user who requires access to a report server must have at least one item-level role assignment. On a new installation, only local administrators have access to a report server. In this case, a local administrator need to create a role
assignment which has Manage folders and Manage reports task to the account by following steps:
Click Home at the top of the page to open the Report Manager home page.
Click the drop-down arrow next to the folders and reports.
Click New Role Assignment.
In Group or user name, specify the name of a group or account.
Select a role which can perform Manage folders and Manage reports tasks.
Click OK to save the role assignments.
For more information about Setting Item-Level Permissions on a Report Server, please refer to the following document:
http://technet.microsoft.com/en-us/library/aa337471(v=sql.105).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How do we fetch the top-level users and groups for a particular resource

Hi Experts,
I need to fetch the top level users and groups (permissions) for a particular resource, Currently i am able to fetch the effective users list.
Thanks.

To elaborate...
Here we need the users and groups who have direct access to the resource. We dont want to resolve groups.
Please help us with the apis to use in our java code to fetch the users and groups.

I have request in the report level but the same is missing in the infocube

Dear Experts,
I have request in the report level but the same is missing in the compressed infocube level. What could be the cause? does the compressed infocube deletes the request ? if so, I could able to view other requests under infocube manage level.
Kindly provide with enough information.
Thanks.............

Hi
Compressing InfoCubes
Use
When you load data into the InfoCube, entire requests can be inserted at the same time. Each of these requests has its own request ID, which is included in the fact table in the packet dimension. This makes it possible to pay particular attention to individual requests. One advantage of the request ID concept is that you can subsequently delete complete requests from the InfoCube.
However, the request ID concept can also cause the same data record (all characteristics agree, with the exception of the request ID) to appear more than once in the fact table. This unnecessarily increases the volume of data, and reduces performance in reporting, as the system has to perform aggregation using the request ID every time you execute a query.
Using compressing, you can eliminate these disadvantages, and bring data from different requests together into one single request (request ID 0).
This function is critical, as the compressed data can no longer be deleted from the InfoCube using its request ID. You must be absolutely certain that the data loaded into the InfoCube is correct.
Features
You can choose request IDs and release them to be compressed. You can schedule the function immediately or in the background, and can schedule it with a process chain.
Compressing one request takes approx. 2.5 ms per data record.
With non-cumulative InfoCubes, compression has an additional effect on query performance. Also, the marker for non-cumulatives in non-cumulative InfoCubes is updated. This means that, on the whole, less data is read for a non-cumulative query, and the reply time is therefore reduced. See also Modeling of Non-Cumulatives with Non-Cumulative Key Figures.
If you run the compression for a non-cumulative InfoCube, the summarization time (including the time to update the markers) will be about 5 ms per data record.
If you are using an Oracle database as your BW database, you can also carry out a report using the relevant InfoCube in reporting while the compression is running. With other manufacturers databases, you will see a warning if you try to execute a query on an InfoCube while the compression is running. In this case you can execute the query once the compression has finished executing.
If you want to avoid the InfoCube containing entries whose key figures are zero values (in reverse posting for example) you can run a zero-elimination at the same time as the compression. In this case, the entries where all key figures are equal to 0 are deleted from the fact table.
Zero-elimination is permitted only for InfoCubes, where key figures with the aggregation behavior SUM appear exclusively. In particular, you are not permitted to run zero-elimination with non-cumulative values.
For non-cumulative InfoCubes, you can ensure that the non-cumulative marker is not updated by setting the indicator No Marker Updating. You have to use this option if you are loading historic non-cumulative value changes into an InfoCube after an initialization has already taken place with the current non-cumulative. Otherwise the results produced in the query will not be correct. For performance reasons, you should compress subsequent delta requests.
Edited by: Allu on Dec 20, 2007 3:26 PM

How to Concat multiple columns to single column at the report level

Hi All,
I have a requirement in such a way that I have to concat multiple colulmns to single column at the report level.
First of all the column I am using in my report is "X" with datatype as Integer. Now if the length of this column "X" is <8 then I have add zero's (0) before the number.
And then I have to concat with a column "Y" and then cocnat with a column "Z" and finally the datatype should be casted to CHAR.
Can anyone please let me know the logic how I can add to my column so that it satisfies all the above.
Thanks All

>Also, Another thing is if X < length of 8 Ihave to append with zero's..
>Ex: if the actual value of X is 123456 i wanted to show it as 000123456.
Try to be consistence what you said, you are looking for 8 length and above ex is 9 in length.
You need to learn many things one of those is CASE, at least do copy and also read
Forums Etiquette/Reward Points

Lync 2013 commands shell to get the report which user is connecting to which pool in coexistence with Legacy version

HI,
We have LYNC 2013 in coexistence with OCS 2007 R2 and setup is like that user can connect to any pool either sip is exist on OCS 2007 or on LYNC 2013
Do we have any command shell to get the details about which user is connecting to which pool?
lync 2013 commands to get the report which user is connecting to legacy pool in coexistence with ocs 2007
Thanks
jitender

HI Holger,
Thanks for reply!!
But the above link will not work as per scenrio.
The SIP addresses has been migrated to LYNC server. ther is no user host on OCS server. However in communicator client the manual entry is done and OCS pool name is given. OCS pool just redirect the query to LYNC pool.
And we need to idenfy the SIP user request on OCS which are redirecting by ocs pool to lync pool
In other word we can say this question like: How to collect the number of SIP users connections coming on OCS Direct server?
Thanks
jitender
As all users are migrated to Lync Server, all users will be redirected to their home pool.
You want to collect the number of SIP connections coming from OCS server that means you want to count the number of Lync client with manual configuration pointing to OCS server.
This information is stored in SIP session. There is no Lync command to get this kind of information natively.
Lisa Zheng
TechNet Community Support

The report of user activity

The report of user activity
Can anyone show how the sample report of user activity?
Is there information that the website opened and how much time was running applications? Is used in an active way of running applications?
I will be grateful for your help.
Jerry

Finding a program of monitoring user activity MAC OS X okazauje be very difficult.
The program aims to monitor sites visited, but:
- Can not save passwords
- It can not sending data to an external server
I can not find such software
I found: http://www.net-monitoring-software.com/secure-order.html
but it turns out that the manufacturer no longer supports MAC platform.
Help! Is anyone familiar with this type of software?
Pls. Help me.

I have a fairly elderly I Mac 7.1 (2.47 Ghz Intel Core Duo) operating OSX v 10.9.5. At the core level I find two Library folders, one within the System Folder and one by itself with the other core level folders - mostly same content. Is this right?

iMac 7.1 (2.47 Ghz Intel Core Duo w/2GB memory) operating OSX v 10.9.5. At the core level I find two Library folders, one within the System Folder and one by itself with the other core level folders - mostly same content. Is this right or do I have a duplication problem?
The system is slow.

Unusual behavior of View selector with the report level 'Add to Briefing Bo

Hi All,
With the report level ‘Add to Briefing Book’ link, we came across an unusual behavior of View selector in a report.
The Briefing Book saves only the default view from View selector in an Updatable Content type, however it behaves perfectly fine when a Snapshot type is selected for saving in Briefing book.
Has anyone faced similar behaviour, is there any fix?
Regards,
Priti

A case needs to opened via support

Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager

Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager?
when I check on Microsoft site it says
Reports are not upgraded when you upload a report definition file directly to the report server
or SharePoint site. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
When you open an .rdl file in Report Designer in SQL Server Data Tools (SSDT), if the report was
created for a previous namespace, Report Designer automatically creates a backup file and upgrades the report to the current namespace.
This is the only way you can upgrade a report definition file.
Now here is another confusing statement which says
You can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server
2012 report server and it is automatically upgraded on first use. The report server stores the report definition file in the original format. The report is automatically upgraded the first time it is viewed, but the stored report definition file remains
unchanged.
All I want to know is if I deploy a rdl made in 2008 r2 to 2012 will it work on the report manager of
2012?
<o:p>
</o:p>
Mudassar

I have tested this fucntionality and can confirm that ssrs 2008 r2 reports work when you deploy them on new ssrs 2012 report manager .
No Migration is required .
I didnt even moved report server dbs .All I did is just deployed reports on the report manager and it worked .
"You
can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server 2012 report server and it is automatically upgraded on first use. "
Microsoft needs to correct this the documentation is misleading
Mudassar

The report has user profile dependencies when enabling caching.

Hi,
Using SQL Server Reporting Services 2008 R2.
I am getting the error in the subject trying to cache a report, I see that this is described here
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/e2ce8dd0-17db-47de-b13e-3574cc9d536f
But, how does this solve my problem? I still want to use the user as a parameter filter so surely returning a default user as part of the error handling will just give every user the data for that hardcoded user when the report is run?
Sorry for my confusion
Many thanks

Hi ReportCreator,
When we use the User!UserID to filter the data at runtime, the system tries to evaluate the User during Cache Load. At cache time report processing does not have access to the user profile information. Any expression like User!... will cause “has user profile
dependencies” error.
Just as Jerry said, we can write custom code to call the User!UserID in your report to get rid of the UserID during the Caching Operation. Please note that we should use a valid filter instead of "System" like shown in the code to the filter the user.
If there are any other questions, please feel free to ask.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Adding Dynamic remarks to the report by user

Any idea's of adding text to queries? Our customer is using Crystal Reports based on Baan DWH. On of the functions is adding textblocks to the report and put in remarks / comments.
This will be replaced by BW. Is it possible to add (dynamic) textblocks to the BW reporting which can be filled in by the end-user? Any advice will be great!

Yes it is.
In BW, this can be achieved by using document management. The option will be available to the user via context menu in the report (goto-->documents - text/pdf/img etc). In your case user can choose to create/change/display a 'text' document, which will be attached to the report.
cheers,

Error when we take the Desc column in the report when we join two facts

Hi All,
We are facing a issue when we join 2 facts via common dimension.
1) When we take the measures like revenue cost etc from both the facts after they getting aggregated on RPD as sum the report runs fine..
But once we add a desc column like Name, address from any of the facts which cant be aggregated it gives a error.
Can any one please share their knoledge over this & the fix..
Thanks,
Pankaj

Hi All,
I am very near to solve this issue. I tried doing the same.. but seems i am missing something please help me figure it out. I appreciate all your help...
-FACT1 Columns:
1) Amount
2) Transaction scr desc
-FACT2 Columns:
1) Accounted DR
2) Transaction scr desc
Note: 1) These Facts are joining over dimensions currency, period etc, whose IDs i havent mentioned in the list above. also i have created reqd dimension & set proper content level too.
2) The measure Amount & Accounted DR from both facts are aggregated as SUM.
Now when i take a report having F1.Amount, F2.Accounted DR, F1.Transaction scr desc, F2.Transaction scr desc
the query fails as I have a non aggregated columns like Transaction scr dec from both the facts.
I tried the above approach mention by you ppl, and made a 2 new logical table, one having scr from one fact from physical & the onther from other fact from physical & made these 2 new tables are dimensions to the earlier also respectively i have created the dimesnions for both 7 set the content level to detail.
I made a new report:
F1.Amount, F2.Accounted DR, F1_NEW.Transaction scr desc, F2_NEW.Transaction scr desc
Unfortunately i m facing this error: [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: tmpt.TRANSACTION_SOURCE. Please fix the metadata consistency warnings.
Thanks,
Pankaj

Symbol # is comming at the reporting level

Respected all BIs
I have created a report in which one of the infoobjects contains text field of length 40 type char.
along with the text values it also contains symbol # at the very bigining, i have checked every where but fing no clues from where the symbol is comming at my reporting level, is there any setting from which i could remove this symbol.
thanks
abhay

hi
is there any value coming against the # . if yes, then chk whether it is useful or not, then u can restrict the query in designer as suggest above.
thanks
neha

In the report level user wants two persons against each work center.

Similar Messages

Maybe you are looking for