In the same box, firefox saves every form but one..

this happens in my phone operator website. There is a place to send sms and there is a box to enter the phone number to send the sms. Firefox saves every phone number but one... I don't remember what I did but it used to store that number as well as the others, now it doesn't.. it is like its on blacklist or something... I tried clearing form history, reinstalling firefox, deleting registry entries.. it wont save that number..

Did you give yourself write permissions for this registry key?
You may nee to go up a level and apply the permission to sub keys:
*HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins

Similar Messages

I notice that in the new update to Firefox if I have two bookmark folders with the same name Firefox will end up deleting one of them.

Both of these problems with the bookmarks started occurring after I installed the latest update to Firefox.
I frequently have bookmark folders of the same name under the older version of Firefox and it has never been a problem before. It is now, and I notice that after I've created two folders with the same name Firefox will end up deleting one of the folders, almost always the older of the two folders (the one created first, chronologically).
I have also noticed that with the new update Firefox will occasionally fail to open all bookmarks in Tabs if I've asked it to do so. I can simply close Firefox and reopen the program and it will work again, but I don't know why this bug is occuring in the first place.

You are using two IP address ranges.. which results in the printer being cut off from the other network..
Why do you have two networks?? It is always better in home situations to run one network.
If you have work setup with an enterprise level router you can setup routes between the two networks.. this is not possible on domestic level apple routers.

I'm using the same font in all my pages but one particular page is blurring and substituting other text.

I'm using Handwriting-Dakota font, which I found out is quite temperamental. I did what someone on here suggested and went to Preferences>Show text imaging indicator. and that fixed all my problems. Now I added a page and the text is all messed up, blurred and stretched sometimes and other times substitutes other text on the page for that box.
I haven't done anything different on this page and even deleted it and started over again but now it's worse than before. This is the only page that is doing this so I'm not sure what to do.
The messed up page is the media page at http://www.intimateopera.org/intimate_opera/Media.html
The main page is http://www.intimateopera.org/intimate_opera/Intimate_Opera.html and from there, once you click the picture all the other pages are fine.
Does anyone know what I can do?

Do a Command A on the page to make sure that the text images and the other images are not overlapping or touching.
You do realize that by turning all your text into images the search engines will see your website as having virtualy zero content with nothing for them to index?
Try to use web safe fonts for the descriptive text and save the images for special occasions like one heading per page or the header.

Firefox saves my cookies, but it keeps logging me out every time I exit the window. What do I do?

Firefox saves my cookies, but it keeps logging me out every time I exit the window. I have "Remember Me" checked off, so I don't understand why it's doing this. Just started all of a sudden. What do I do?

tried the above still having the same problem

Whenever i type in the google box to search every letter i type firefox asks what would i like to use to open this file this is so annoying how do i get it to stop doing this?

whenever i type in the google box to search every letter i type firefox asks what would i like to use to open this file this is so annoying how do i get it to stop doing this?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How do you apply the same password policy to every PDF document you create with inDesign?

All,
Adobe peeps!,
I don't know if this is really supported with inDesign 5.5, but here is my my use case:
I constantly create more than 10 PDFs a day using inDesign
On all PDF's I create, i want to apply password security to protect them
But in order to do so, within inDesign, I am always forced to go to the "security dialogue" pane to set up the same permission and passwords over and over again
This gets tiring :/
So what I am hoping to do is the following:
Like acrobat, I want to create a password policy within inDesign
I want all PDFs created to have such a password policy be automatically applied
I know acrobat supports something like this (http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7d68.w.h tml), but, unless I may have missed something, the Acrobat feature is limited. That is, the help link does not tell me how to automatically do this with Acrobat either (the link does not explain to me how to "automatically apply the same password security policy to every PDF document I save within the application). I think the only way to do so is via "Adobe LiveCycle Rights Management ES", but for non server users, I am hoping there is another way.
So my questions are:
Is it possible to create password security policies in inDesign?
Is it possible to apply the same password security policy to every PDF i create in inDesign?
If not, can I change default settings within Acrobat ProX to automatically apply a password security policy everytime I save a PDF?
If all fails, do you guys know of any extensions that can support this?
Any help would be great. Thanks!

Steve,
Thanks for your notes. To follow up on your response.
Bummer. I kinda had a hunch at this inDesign limitation.
I have been aware of the method for setting up of a security policy within Acrobat. While this feature does cut down some of the work involved in creating and applying password policies to pdfs, what I am looking for with Acrobat is to apply the same password policy to every document I save from the app. Automatically. Without having to manualy select a policy.
I think my solution will have to lie in me creating some sort of script to help support this need. I don't think Acrobat Pro X has the capabilities to allow me to tinker with, say, creating a save PDF preset that will allow me to automatically apply a password policy.
PS. I am using acrobat pro x.

When I try to install download helper I am told to restart firefox. I do, and go back to the same "restart firefox" message.

I have tried to install "download helper" as a Firefox add-on. I hit the install button, but then get a box telling me to restart firefox. I do, but end up at the same page with the same "restart firefox" message everytime I try to install "download helper."

It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved

9ias R2 infrastructure and middle tier on the same box

Can someone please point me to a referece where the details of installing 9iasR2 on the same box are located? I need information on the install and especially on the Unix scripts and the appropiate enviroment variables that need to be configured to start/stop iASR2. i.e. dcmctl needs to be called twice? for each httpd server instance?
If at all possible, notes on Reports and Forms variables startup scripts would be helpful. I've search through metalink but only found crumbs...
System in Question
Sun Sparc
Solaris 8

Claudio,
Check out the Oracle9i APplication Server Administrator's guide - chpt 2 and 3 lay this out pretty well. In my case, my infrastructure is in "isuites" and my base is "isuitesDB", so it is fairly clear (but could be clearer) which service belongs to which install.
I don't remember where, but also in that document is info that specifically states the order that must be followed in starting up each of the tasks.
r.b.

Can E-RECRUITING share the same box of ECC?

I always install E-RECRUITING on a dedicated server as an ABAP application. Then connect to its backend ECC.
Just curious, can I install E-RECRUITING on the same box where its backend ECC system is installed? ECC and E-RECRUITING will have
different SIDs but co-exist in one Oracle MCOD DB.
Further more, can E-RECRUITING and its backend ECC belong to the same SID but on different clients?
Thanks for help.

Yes and yes. The first scenario is comparable to I2-A and the second one to I2-B. See the application help for details.

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
thanks everyone

BaconHouseVidz wrote:
… at the same time…
in hope to speed things up?
no, no effect.

BW and R/3 in the same box with a single instance ECC 5.0

Hi anybody using this scenario of having bw and r/3 in the same box....we are planing to consider in our project.
will be happy if anybody can provide me some help on this.
thanks and regards
neel

HI Neel Kamal,
I think its a better option to distinguish OLTP like R/3 or ECC and OLAP like BW rather on a single instance
from the above posts
Let us know if this holds good
Thanks,
Raj

ABAP and JAVA Stack in the same box

Hi all,
I have installed Java Sneak preview first and after I installed ABAP Sneak in the same box.
Everything is working fine but I noticed a little detail.
My jcontrol.exe service disapeared from SAP Management Console.
I mean before installed ABAP Stack my MMC had 2 divisions in my J2E instance:
server 1 with 2 Process msg_server.exe and enserver.exe
server 0 with 2 Process jcontrol.exe and igswd.exe
After installed ABAP Stack, my server 0 became part of NSP Instance and jcontrol process is not displayed anymore anywhere.
Instead I see now msg_server.exe and disp+work.exe and igswd.exe that of course are Process of the ABAP system.
Does anyone have a nice explanation for this?
Regards,
Mauricio

Hi mauricio,
I was installing Netweaver sp15 both Java and ABAP version on one PC. But it seems they are working.
Can you please tell the procedures to follow, to have good installation?
If I load java version first and then ABAP i get error at step 11.
Did you parttition the drive in to 2 or you installed on the same partition?
Your help will be greatly apprecieated.
Thanks

Picture and text in the same box for the calender?

Is it possible to put a small picture in the box (for say May 4) and also get a short text line in the same box?
When I'm doing it now, the picture takes up the whole box and the text goes underneath.
Thanks

Unfortunately that's how it works. If you have a 3rd party editor you could add the text to the picture before adding it to the calendar. Put in a feature request at http://www.apple.com/feedback/iphoto.html.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Two different 10g installations in the same box

Hi,
I installed oracle 10.2.0.2 and 10.2.0.4 in the same box, using different paths as ORACLE_HOME, but the same user... I am gettin this errors when trying to create an instance:
hu Feb 12 10:31:29 2009
Errors in file /oracle10/app/oracle/admin/SIDBDPR1/bdump/sidbdpr1_ckpt_29994.trc:
ORA-07445: exception encountered: core dump [kgskhighthreshold()+72] [SIGSEGV] [Address not mapped to object] [0x0000001F6] [] []
Thu Feb 12 10:31:44 2009
Errors in file /oracle10/app/oracle/admin/SIDBDPR1/bdump/sidbdpr1_pmon_29984.trc:
ORA-00469: CKPT process terminated with error
Thu Feb 12 10:31:44 2009
PMON: terminating instance due to error 469
Instance terminated by PMON, pid = 29984
Wonder if this error could be a consequence of the /usr/local/ssl/lib/ files update... I first installed 10.2.0.2, then 10.2.0.4, and I am using 10.2.0.4 to create the instance.
Thanks!!!

ISSUE CLARIFICATION
===================
-- Problem Statement:
CKPT crashed with ORA-07445 [kgskhighthreshold()+72] during CPU count dynamically.
ISSUE VERIFICATION
==================
Verified the issue referencing data collected records as DC#1.
CAUSE DETERMINATION
===================
The issue matches exactly Bug 7172531 as I mentioned based on the error, symptom and call
stack.
CAUSE JUSTIFICATION
===================
- Same erorr : ORA-7445[kgskhighthreshold]
- Same symptom : CKPT crash during cpu count change
- Same call stack : gskhighthreshold kskcpucc ksbcpu_mod kspptval kspset0
PROPOSED SOLUTION(S)
====================
Apply one-off patch for bug 7172531 on top of 10.2.0.4.
PROPOSED SOLUTION JUSTIFICATION(S)
==================================
Note 7172531.8: Bug 7172531 - Dump when CPU count dynamically changed
SOLUTION / ACTION PLAN
======================
-- To implement the solution, please execute the following steps::
Apply one-off patch for bug 7172531.
KNOWLEDGE CONTENT
=================
Note 7172531.8: Bug 7172531 - Dump when CPU count dynamically changed
Email Update button has been pressed: Sending email to [email protected]

Why does the same photo appear in every iphoto album?

Why does the same photo appear in every album? Clicking on it makes other pictures appear?

Backup your iPhoto library, depress and hold the option an command keys, launch iPhoto and from the resulting first aid window rebuild your thumbnails. This may take several trys
If it does not fix the issue then repeat and rebuild your database
LN

In the same box, firefox saves every form but one..

Similar Messages

Maybe you are looking for