In UDT while entering data, error occurs

hi everyone,
I have created a udt and have entered the data in it but now when i am tying to add new data into it, it is showing me the error
"The entry already exists in the table"
can anyone suggest me wy it is happning so.
Regrds,
Meghana

Hi Meghana.......
Just delete the last recent entry you did and enter it again and then enter the new one.
Hope this will help you to add....
Try this in test DB......
Regards,
Rahul

Similar Messages

  • Error While entering data in VA01

    Hi,
    I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
    Runtime Errors SAPSQL_INVALID_TABLENAME
    Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
    Date and Time 27.04.2009 12:57:13
    Short dump has not been completely stored (too big)
    Short text
    A table name, specified in an SQL command, is unknown.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLV61Z" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
    not caught in
    procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An invalid table name "A996" was specified in an Open SQL command:
    Due to one of the following reasons, the error occurs only at runtime:
    - the table name was specified dynamically, or
    - the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
    ORDER-BY clause was specified dynamically.
    Missing RAISING Clause in Interface
    Program SAPLV61Z
    Include LV61ZU01
    Row 260
    Module type (FORM)
    Module Name SEL_KONDTAB
    Trigger Location of Exception
    Program SAPLV61Z
    Include LV61ZU01
    Row 724
    Module type (FORM)
    Module Name SEL_KONDTAB
    Source Code Extract
    Line SourceCde
    694 and kschl = se_kschl
    695 and datbi >= se_date
    696 and datab <= se_date
    697 and (coding_tab).
    698 endif.
    699 endif.
    700 else.
    701 if t681-ksdat is initial.
    702 if not <entrytab> is assigned.
    703 select * from (t681-kotab) appending table <cond_tab>
    704 where kappl = se_kappl
    705 and kschl = se_kschl
    706 and (coding_tab).
    707 else.
    708 select * from (t681-kotab) appending table <cond_tab>
    709 for all entries in <entrytab>
    710 where kappl = se_kappl
    711 and kschl = se_kschl
    712 and (coding_tab).
    713 endif.
    714 h_subrc = sy-subrc.
    715 if select_split ne 0.
    716 modify coding_tab from coding_alter index select_split.
    717 select * from (t681-kotab) appending table <cond_tab>
    718 where kappl = se_kappl
    719 and kschl = se_kschl
    720 and (coding_tab).
    721 endif.
    722 else.
    723 if not <entrytab> is assigned.
    >>>>> select * from (t681-kotab) appending table <cond_tab>
    725 where kappl = se_kappl
    726 and kschl = se_kschl
    727 and datbi >= se_date
    728 and datab <= se_date
    729 and (coding_tab).
    730 else.
    731 select * from (t681-kotab) appending table <cond_tab>
    732 for all entries in <entrytab>
    733 where kappl = se_kappl
    734 and kschl = se_kschl
    735 and datbi >= se_date
    736 and datab <= se_date
    737 and (coding_tab).
    738 endif.
    739 h_subrc = sy-subrc.
    740 if select_split ne 0.
    741 modify coding_tab from coding_alter index select_split.
    742 select * from (t681-kotab) appending table <cond_tab>
    743 where kappl = se_kappl
    Thank you in advance....
    Regards,
    Sriram.

    An invalid table name "A996" was specified
       in an Open SQL command
    Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
    thanks
    G. Lakshmipathi

  • While connecting ssms error occured...2node cluster server...........

    TITLE: Connect to Server
    Cannot connect to TCCDBSQLDEV\SQL01.
    ADDITIONAL INFORMATION:
    A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) (Microsoft SQL Server, Error: 10054)

    Hello,
    Another possible solutions and causes for this error can be found on the following resources:
    https://social.msdn.microsoft.com/Forums/en-US/201a4e08-4faf-4183-a585-b69622f1a213/cannot-connect-to-sql2k5-instance-with-error-an-existing-connection-was-forcibly-closed-by-the?forum=sqldatabaseengine
    http://msdn.microsoft.com/en-us/library/ms187005(SQL.105).aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Kernel data error occuring while installation of windows 10

    i have downloaded windows 10 but during its installation my laptop's screen turn blue and shows "kernel data inpage error" and says that laptop needs a restart...and when my laptop restarts its shows no reboot device found and no operating system is found in your hardrive....then i have to press my laptops power button and shut it down and then again turn on my laptop.....three times i have tried installing windows 10 and each time this error  has occured........please someone answer me that what is this kernel inpage error?....what is this reboot device?....and what should i do to fix this problem?

    Hi,
    While doing a fresh install of Windows server 2012 R2 on a machine I am getting error as
    "Windows could not update the computer's boot configuration. Installation cannot proceed."
    I have even tried to delete all the partitions and then tried to do the installation but similar error pop up after complete installation.
    Even I tried to run bootrec with /fixmbr /fixboot but still no resort.
    Any thoughts how to fix the issue.
    Thanks in advance.
    you need a fairly modern rig with lots of RAM to run Server 2012 R2
    Corsair Carbide 300R with window
    Corsair TX850V2 12V1 70A
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 660 Ti FTW Signature
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 x64 Professional
    LG WH14NS40 14X Blu-Ray Writer BDXL 128GB
    Microsoft Wireless Desktop 2000
    Wacom Bamboo CHT470M

  • Sorting a Vector while entering data

    Hi, I want to sort the data of a vector as data is entered, the vector is going to contain a tree type structure in other words each element inside the vector can link to another vector in an element.
    I have this add procedure at the moment which doesn't work.
    public void add (char i)
         TreeNode node = new TreeNode(i);
         if (child.contains(node) == false) /* does the tree contain the node */
         int f = 0;
         boolean inserted = false;
         while (inserted == false)
         if (node > child.elementAt(f));
              f++;
         else
              child.addElement(node);
              inserted = true;
         else
         System.out.println (" The child already contains the child");
    And this is my calls for the procedure
    class TreeNodeTest
    public static void main (String[] args)
    TreeNode nodes = new TreeNode('Z');
              System.out.println ("The variable held in the node is " + nodes.data());
    nodes.add('d');
    nodes.add('c'); //the elements put into my tree
    nodes.add('a');
    nodes.add('a');
    System.out.println(nodes.numChild());
    So z is the root node and d,c,a are its children. Please Help

    I don't see any sorting going on there, and I don't see any vectors. And you didn't say what your problem was. Want to try asking a better question?

  • Short Dump while entering data in VF01

    Runtime Errors         SAPSQL_INVALID_FIELDNAME
    Except.                    CX_SY_DYNAMIC_OSQL_SEMANTICS
    Program                               SAPLV61Z
    Include                                 LV61ZU01
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
         not caught in
        procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        An Open SQL clause was specified dynamically. The contained field name
        "WERKS" does not exist in any of the database tables from the FROM clause.
    Error found in these codes.
    if se_read_all_prestep is initial.
              select * from (t681-kotab) appending table <cond_tab>
                     up to 1 rows
                     where kappl  = se_kappl
                     and   kschl  = se_kschl
                     and   datbi >= se_date
                     and   datab <= se_date
                     and   (coding_tab).
              h_subrc = sy-subrc.
    I had debug the codes and found that when t681-kotab = A752 and line in coding_tab is ALAND = 'DE' and WERKS = 'XX' and VSTEL = 'XX' and LLAND = 'NL'. I will hit error because in A752 table, field WERKS does not exists!
    I guess this is a config problem but I do not know how to fix it.
    Appreciate helps. Thanks a lot.

    Hi,
    I executed v/07 but I cannot find the 752 table.
    T-code: v/07
    Usage: A
    Application: V
    Access sequence: MWST
    Access No: 08, Table = 78
    Access No: 10, Table = 2
    Access No: 20, Table = 11
    Please assist. Thanks.

  • Error While fetching data error on line 2 at column 245:

    This page contains the following errors:
    error on line 2 at column 245: Opening and ending tag mismatch: img line 0 and span
    Below is a rendering of the page up to the first error.
    I'm not using date column in report.

    Hi,
    at least, isn't this should be in double quotes: 'Stock Order'
    i.e. 'Stock Order' change to "Stock Order"
    seems you either using some customized RMS or you have couple errors in table names and columns names as well.
    Eldar.A

  • Oracle 10g AS on RHEL3 -- While restarting Component-- Error occurs

    Friends,
    I have installed Oracle 10g AS on RHEL3, under Oracle_Home where already Oracle9i is installed. I got some errors while changing the parameters in component[u] home and restarting it. I have changed some parameters in webcache and succesfully restarted.
    1) OC4J-home - failed to set the process status to ProcStatusRestart.
    2) OC4J.home - failed to restart a managed process after the maximum retry limit.
    I have commented some lines in server.xml(commented log, in order to
    reduce space for testing process) and one more file global_******.xml
    It also shows errors like orionp..... javahostexception.
    1)Can we install different versions of Oracle under one Oracle_Home.
    2)What could be the cause of the problem.
    3)How can i rectify it.
    Help me.
    Thanks,
    Raj

    Hi all,
    I have installed Oracle10g R2 on RHEL3.
    Regards,
    Raj

  • Calculations while entering data into table via table maintenance generator

    Hi all,
    This is the following requirement.
    I created a ztable and also I created the table maintenance generator.  I have two fields which accept integer data.
    The requirement is when I enter value in the first field from the tcode SM30 the data should be populated into the second field automatically by subtracting the first value from 100.
    Can anyone explain me how I can do that.
    Thanks,
    Daniel

    hi,
    take the help of events in TMG and write the code in that event
    like field2 = field1 - 100
    steps to create events
    Step: 1: Create a table
    Step: 2: In SE11, go to Utilities --> table maintenance generator.
    Step: 3: Follow the path Environment --> Modification --> Events.
    Step: 4: Click new entries, select a table maintenance dialog event which suits your requirement.
    Step: 5: Create a form routine.
    Step: 6: Include your logic in the routine created in step 5.
    Hope this helps you.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
    Re: bdc
    reward if helpful
    prasanth

  • Import fixed asset data, error occur.

    Dear all,
    I imported fixed asset master data as following:
    FA21600111;602;Dell电脑;OPTIPLEX 380DT      ;2010-03-26;;;;G300662098;非生产设备;104;;3179;1;3179;100;2010-04-01;60;60;LINP;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    SB1 prompted system message: Import end; Number of successfully imported:0; Number of processed assets:1
    and I open the log file, it says:
    2010-05-06 12:12:43.420      0     BA     ER     CBAMasterDataTransfer::CBAMasterDataTransfer     Life Parameter: FA21600111;602;Dell电脑;OPTIPLEX 380DT      ;2010-03-26;;;;G300662098;非生产设备;104;;3179;1;3179;100;2010-04-01;60;60;LINP;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    what's that means?
    and I found that if the asset's Capitalization Date is current year, It can't be imported and show the message in the log file, why?

    Hi,
    You may check this thread first:
    How can we import Fixed asset of the current year ?
    Thanks,
    Gordon

  • While running auotpatch error occured

    hai folks,
    when i am applying patch for 11.5.10.2
    it thrown error ERROR OCCCURED IN VERSION CHECKING FOR DRIVER FILE.
    TELL ME THE CAUSE. 3036401 THIS MINI PACK I AM APPLYING. TELL ME THE CAUSE.
    ALL PREREQUESTS ARE APPLIED.
    REGARDS
    DBA

    check the ownership for patch dir (directory 3036401 where u have extrcted) that should not be root .
    That sould be apps os user(in my system it is applmgr) and u have to apply the patch as apps os user

  • Error while validating data  template

    hi ,
    I get the following error while i validate the data template
    failed to save data
    error occured while crating xml data
    nls_error_illegal_value
    NaN
    Nan
    the following is the data template
    <dataTemplate name="dataTemplateName" description="Template description"
    dataSourceRef="val_ds" defaultPackage="employee" version="1.0">
    <parameters>
    <parameter name="department" dataType="character" defaultValue="10"/>
    </parameters>
    <dataQuery>
    <sqlStatement name="Q1"
    select EMPNO,ENAME,JOB from emp WHERE DEPTNO=:department
    </sqlStatement>
    <dataQuery>
    <dataTrigger name="beforeReport" source="employee.beforeReportTrigger"/>
    <datastructure>
    <group name="G_EMPLOYEE" source="Q1">
    <element name="EMPLOYEE_NUMBER" value="EMPNO"/>
    <element name="NAME" value="ENAME"/>
    <element name="SALARY" value="SAL"/>
    </group>
    </dataStructure>
    </dataTemplate>
    can someone checkfor me
    ta
    s

    Hi,
    Try removing the defaultPackage="employee" from the dataTemplate element. I also noticed that there are the following errors in your XML template:
    <sqlStatement name="Q1" is missing the closing ">"
    There are two <dataQuery> tags - the 2nd one should obviously be </dataQuery>
    You are selecting EMPNO,ENAME,JOB but reference EMPNO,ENAME and JOB in your GROUP
    Cheers
    Andy

  • Error entering data in a data form using Smart View

    One of my user is facing an issue while entering data in a data form through Excel, if she uses the same data form in workspace she is able to enter data. She is facing the issue while entering in a specific column, for all other columns she is able to enter data in the data form. It is only one column for which she is facing issue while using smart view/excel and not workspace, as in workspace she is able to enter data.
    Thanks,

    Hi
    Check they have the "Data Form Write Back from Excel" role in Shared Services.
    See p.133 of the security guide for more info -
    http://docs.oracle.com/cd/E17236_01/epm.1112/hss_admin_1112200.pdf
    Regards
    jpr

  • Error occured while importing xsd.file(Name contains invalid characters: -

    Hello,
    i muss import xsd.file.  while importing this error occured:
    İFMEXTDEF CCTS_CCT_SchemaModule-2.0 | http://example.org/XXX/XXX/OUT/NOZ (SC_NOZ V001 of example.org):
    Name contains invalid characters: - .
    Only a(A)-z(Z), 0-9, and "_" are permitted
    This xsdfile name is CCTS_CCT_SchemaModule-2.0 but PI doesn't  accept "-". But i muss use this file because this file is standart. What can i do for this?
    Thanks
    Nurhan
    Edited by: Nurhan on Oct 18, 2011 11:22 AM

    HI,
      PI doestnt support special characters like '-'. first you need to change the file name as you specify '-'. to remove that and you have to give '_'. then uyou have to impot >XSD file into ESR under ExternalDefination.
    i hope this will help you.
    regards,
    ganesh.

  • I have an iPad 2 ios 6.1.3 and im trying to download ios 7 and it says error occured while downloading ios 7.0 any ideas?

    Anyone can help me?
    Ios 7 error while updating
    An error occured while downloding ios 7.0

    The entire planet Earth is trying to download the same thing at the same time.
    Give it some time.   

Maybe you are looking for

  • I am getting Error that there is nothing to be processed.

    I am trying to convert an access database to SQL 2008 Database. I have done this conversion multiple times with sucess but now I am getting the following error. I get this error when I try to create report, convert schema and migrate data. "Conversio

  • Is it possible to use a presenter remote with an iPad2? If so what kind?

    I am a youth pastor and I like to connect my iPad2 to the sound system and to our flat screen tv. My problem is I want to use my iPad2 in a presenter style type of way where I do not need to be standing next to my iPad2 to change the slides. I was wo

  • Zen Touch Playlist From Compu

    I couldn't find anything on this in the FAQ that was definiti've--so here is my question....is the only way to transfer a playlist from a computer by using Creative Mediasource? I can't get WMP0 to work, nor the new Yahoo Music Engine (which works gr

  • Adding XML Declaration and Document Type Declaration.

    I'm using Oracle's XML Class Generator C++ version 1.0.2.0.0. I can create classes from a defined external DTD and create my XML document. But the document does not contain the XML Declaration <?xml version='1.0?> nor does it contain the Document Typ

  • OSX G5 Disk Image and HDD manipulation... Help

    Hello Everyone. On the PC a program called Partition Magic, among others, that allows partition copy, resize, create, delete, etc. I have used Mac disk utility, but I haven't found it to do what I'm trying to do. I am looking for the same type of pro