In ux the old and new menu's appear and nothing is moveable.

I downloaded Firefox UX and I understand that Many problems will appear. When I saw the screenshots I didnt see the old menu button, just the new one but on my computer they both appear. And when I hit customize no buttons are moveable (even the addon buttons). Anyone know whats wrong?

Yes, UX is very unfinished. Nothing works as it will in the future - it verges on being useless right now

Similar Messages

  • My iCloud account name was inputted incorrectly when my iPhone was set up. I made a new iCloud account but my phone still automatically loads the old and unusable iCloud account. How can I update my phone to load the new and correct account?

    My iCloud account name was inputted incorrectly during initial phone set up. I created another iCloud account name but it is still the old and wrong iCloud account that automatically loads whenever I access the iCloud tab on my phone. How do I replace it my new and correct account name?

    She won't after the change.
    Note you can use the same Apple ID in
    Settings > iTunes & App Store > Apple ID: > here to share purchased music, apps and books.
    Other than that each of you should use your own Apple ID for iMessage, FaceTime, iCloud, Game Center, etc.

  • Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Welcome to Apple Support Communities
    You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
    There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

  • Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

    Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

    You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
    Best of luck.

  • Do you have the old for new service? Can I upgrade my iPhone 5s to the new iPhone 6 and how much does it cost?

    Do you have the old for new service? Can I upgrade my iPhone 5s to the new iPhone 6 and how much does it cost?

    Actually, in the US at least the website states
    You can recycle your iPhone at the Apple Retail Store and get immediate credit for its value toward the purchase of a new one.**
    from
    http://www.apple.com/retail/iphone/
    my 5S showed a top value of $305 allowance

  • When a contact gets a new phone number, I delete the old and enter the new.  Then when I text or call the old number shows up as a selection yet it's no longer under the contacts info.

    When a contact gets a new phone number, I delete the old number and enter the new number.  When I try to text or call, both the old a new numbers. One up as a selection choice, even though the old number is gone from the contact.

    That's normal behavior as the old one will remain in the memory cache for a while until it's eventually overwritten.  If it's particularly bothersome to you, you can restore your phone as NEW and this will empty the cache.

  • The old and the new - how to do it? cross post in Community.linux-User International

    Hello,
    Currently I have Netware 6.5.7 SB suite/ has GroupWise.
    I want to move to the Linux platform with OES2/NOWS.
    The "Boss" wants to keep the current domain: [email protected]
    He wants to change it to a new web site domain name:
    [email protected]
    I already have the web site redirected.
    Type in old domain name and it goes to new domain name.
    He will however drop the old domain in a few months after all customers make
    the change.
    I am sure that this happens to many companies that change their domain name.
    How can I do this?
    Can I use my old server (GroupWise/Netware) with the old domain email
    addresses and the new Linux server with the new domain address at the same
    time?
    Alternatively, could somehow redirect all mail from the old email address to
    the new one?
    The problem is, I have a lot of email on the older Netware server that I
    still need.
    Could it be transferred to the Linux server?
    Any advice that you can provide will be appreciated very much.
    Thanks for your time,
    Jim
    RE:The old and the new - how to do it?

    Anders,
    That does not sound to hard ---
    I will look into that.
    Thanks!
    "Anders Gustafsson" <[email protected]> wrote in message
    news:[email protected]..
    > Jim,
    >> Can I use my old server (GroupWise/Netware) with the old domain email
    >> addresses and the new Linux server with the new domain address at the
    >> same
    >> time?
    >>
    > Basically yes, but what I would do is to set up groupwise to answer on
    > both
    > domain names. Then migrate the entire GW system to Linux. Ask in the
    > groupwise
    > forums of specifics.
    >
    > - Anders Gustafsson (Sysop)
    > The Aaland Islands (N60 E20)
    >
    >
    > Novell has a new enhancement request system,
    > or what is now known as the requirement portal.
    > If customers would like to give input in the upcoming
    > releases of Novell products then they should go to
    > http://www.novell.com/rms
    >

  • APP-PAY-06841: Person change exit between the old and the new date.

    Hi,
    Please help me by answering this question as very urgent basis.
    ABC employee Effective date should be of future dated 10-jan-2011.
    But ABC employee joining date has been entered on 10-Aug-2010.
    amd also this date is also ended by updating on 10-Dec-2010.
    But these records are wrong.This employee's effective date should be form 01-Jan-2011.
    how to datetrack.
    if iam changing the date bye keeping effective date as 10-Dec-2010 an an iam changing the record to 01-jan-2011,its throwing the error as "**APP-PAY-06841: Person change exit between the old and the new date**"
    Thanks&Regards,
    Sowmya.K

    What is the application release?
    Please see these docs.
    Error: APP-PAY-06841: Person changes exist between the old date and the new date [ID 399056.1]
    APP-PAY-06841 When Changing Latest Start Date Of An Employee Who Was An Ex-Contingent Worker [ID 1146414.1]
    Unable To Change Start Date for Employee, Get Error "APP-PAY-06841: Person Changes Exist Between The Old Date And The New Date" [ID 603233.1]
    Correcting Latest Start Date in People Screen Gives Error APP-PAY-06841 [ID 368289.1]
    How To Change the Latest Start Date of an Employee? [ID 329692.1]
    Thanks,
    Hussein

  • I generated a new Itunes Account and now the App sync. does not work with theapps I bought with the old account. Is it possible to merge the old and the new account ?

    I generated a new Itunes Account and now the App sync. does not work with the apps I bought with the old account. Is it possible to merge the old and the new account ?

    It is not possible to merge Apple IDs. 
    Why did you create a new one?

  • When I installed CC 2014, I ended up with the old and new applications.

    When I installed CC 2014, I ended up with the old and new applications. When I uninstall the old one, it takes out the new one too. Suggestions?

    Hi LeoOfMars,
    This is an expected behavior. Please check : http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    If you dont want to use the older version you can uninstall them.
    Regards,
    Rave

  • An event in one of my libraries no longer has the event icon next to it's name just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing.

    an event in one of my libraries no longer has the event icon next to it's name in the browser just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing. After control clicking the event it shows all the media that has been previously imported. But it does not allow anything to be done to the event including deleting. This showed up at the beginning of a normal import session. This is fortunately the back-up evant.

    Did you perhaps mess with the contents of the library in the Finder?
    You may try the solution suggested in this thread:
    https://discussions.apple.com/message/24915790#24915790

  • I have Adobe Pro X and use a PC.  My menu toolbar (file, edit, view, etc) is missing.  I tried to reset the toolbars and nothing happened.

    I have Adobe Pro X and use a PC.  My menu toolbar (file, edit, view, etc) is missing.  I tried to reset the toolbars and nothing happened.

    Press the F9 key to toggle the menu bar on and off. A PDF can contain a setting that will hide the menu bar automatically, which I find very annoying, but you can turn this off with the following preference: Edit > Preferences > Documents > Allow documents to hide the menu bar...

  • TS1702 My iBooks is refusing to launch on the new iPad. Worked yesterday. . I have restarted the iPad and nothing. Latest os and no app update in the store.  Help

    Tring to launch iBooks just flashes an goes back to launch icon My iBooks is refusing to launch on the new iPad. Worked yesterday. . I have restarted the iPad and nothing. Latest os and no app update in the store.  Help

    Have you tried closing the iBooks app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with iBooks 'open' on-screen, though it sounds like you can't get it to be open anyway) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iBooks app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset (not sure whether this is what you meant by a restart) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have Windows 8 and Itunes 11.1.2. When I click on the Itunes desktop shortcut, Itunes won't open. I just the icon go to the taskbar and nothing more. Please help.

    I have Windows 8 and Itunes 11.1.2. When I click on the Itunes desktop shortcut, Itunes won't open. I just the icon go to the taskbar and nothing more. Please help.

    Delete the shortcut and make a new one. The 'real' application will probably be fine if you launch it from the Start/Programs menu.

  • Premiere Elements 13 won't launch in Windows 8.1 (Click the icon and nothing happens)

    I'm running the trial version of Premiere Elements 13 on Windows 8.1 64-bit. It's a brand new PC built for video editing. Everything worked perfectly for about a week and all of a sudden I'm unable to start the program. I click the icon and nothing happens. No splash screen, no error code, no spinning circle cursor.
    I have the latest video card drivers for my graphics card.
    I've tried uninstalling the program, removed every last Adobe file from my PC, uninstalled all instances of Microsoft Visual C++ and reinstalled Adobe Premiere Elements 13. I tried the same with a fresh download of the program. Neither worked.
    I've tried installing a couple .dll files based on a similar thread (where a program called iLivid was the issue). I don't have iLivid on this PC and adding the new drivers didn't work.
    For the few days that the software was working I loved it and was ready to purchase. Unfortunately I won't be able to buy it until I can get it to launch on my PC. Any help would be greatly appreciated.
    Thanks!

    celebornx
    My major problem was with the reliability of the uninstall reinstall of Premiere Elements 12 Windows. I did not encounter any issues in this regard with 11. And, I have only looked at the 30 day tryout of 13 from Adobe. My computers are Windows XP 32 bit, Windows 7 64 bit, Windows 8 and later 8.1 64 bit. The following describes what got me through the worse of these hassels.
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
    I am not sure if the above will work for you with 13. But, it would be worthwhile to check them out.
    Since you are dealing with current version 13, it might be a good idea to get Adobe via its Adobe Chat involved, with the hope of some remote control of your computer troubleshooting to try to get to the core of the issue. Chat Panels have been hard to come by for some of these issues, but let us try this route.
    Please click on the following link
    Contact Customer Care
    Premiere Elements
    Adobe ID and signing in
    Adobe ID, sign in, and account help
    Chat Panel
    If the link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
    Depending on the outcome....if you purchased Premiere Elements 13 from Adobe direct within the last 30 days, you can request your
    money back from Adobe. If you purchased elsewhere, then you are left to deal with the return policy of the seller.
    We will be watching for further developments.
    ATR

  • I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

    I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

    This sorted it for me:
    Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
    To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

Maybe you are looking for

  • Open/run application from DVD

    Hi everyone, Is it possible to run an application (either an .exe or .app file) from a menu architected in Encore? I have a DVD project, to which I created a desktop counterpart. I would like to give my user the option of running the desktop version.

  • Check available authorization groups

    Hi , if a custom table needs to be assigned to an authorization group in SAP. Which is the transaction to check users assigned to an authorization group? Currently i have an idea that Assigning and Creating authorization groups are dealt in SE54 but

  • Data-Source-Aliases

    I am trying to create a new data-source-aliases.xml file, however I get this message: Only alias for test application:  No connection can be established to the Nameserver of this Development Component project.  This means that you can only make alias

  • Usage Tracking for BI Server Hosting Multiple Repositories

    Hi all, I've got my BI Server hosting two repositories: [ REPOSITORY ] DemoApp1 = DemoApp1.rpd, DEFAULT; DemoApp2 = DemoApp2.rpd; And started two Presentation Services connecting to these two repositories respectively, and two web front-ends at /anal

  • Adjusting image geometry

    In upgrading to Aperture I was expecting to be able to morph the geometry within images, beyond the basic capability of changing the angle of the whole picture. I had seen this in other products, Adobe I think. Anyhow... am I just missing something?