Inbound Idoc type for Usage Decision QA11

Dear SAP Gurus,
Would like to find out if there is any inbound idoc type to perform Usage Decision (transaction QA11).
Will reward points for any kind of help. Thank you.
regards,
Ju Lee

Hi,
There is no standard Inbound Idoc for UD. But there is BAPI available for same "BAPI_INSPLOT_SETUSAGEDECISION".

Similar Messages

  • Inbound Idoc type for posting Non-PO Invoice

    Hi,
    I am looking for an inbound Idoc type to post Non-PO Invoice.  The Idoc types INVOIC01 and INVOIC02 helps me to post the invoice with reference to PO.  But I am looking for the Idoc type to post the invoices without reference to PO i.e., For example to post the transaction FB60 (Enter vendor invoice without ref to purchase order).
    with regards,
    suresh

    Hello Deep,
    I know it might be quite late for you for this answer, nevertheless I will write that, because there are lots of question like yours. bapi_incominginvoice_park is also a suitable bapi for you. All you need to do is call it this way:
    data: headerdata like bapi_incinv_create_header value is initial,
            table_item type table of bapi_incinv_create_item,
            gl_account like bapi_incinv_create_gl_account,
            table_gl type table of bapi_incinv_create_gl_account.
    * fill headerdata and table_gl, leaving table_item empty
    CALL FUNCTION 'BAPI_INCOMINGINVOICE_PARK'
        EXPORTING
          HEADERDATA                = HEADERDATA
    *   ADDRESSDATA               =
        IMPORTING
          INVOICEDOCNUMBER          = lv_docnr
          FISCALYEAR                = lv_year
        TABLES
          ITEMDATA                  = table_item
    *      ACCOUNTINGDATA            = table_acc
          GLACCOUNTDATA             = table_gl
    *   MATERIALDATA              =
    *      TAXDATA                   = table_tax
    *   WITHTAXDATA               =
    *   VENDORITEMSPLITDATA       =
          RETURN                    = lt_return.
    This works perfectly for me, creating a mir7 document without refering to a PO. The trick here is to fulfill the glaccountingdata importing table while leaving itemdata empty.

  • What is the Object type for Usage Decision

    I am creating a status profile for UD, that is, If no result recording the no Usage Decision. Which object type should I assign against this newly created status profile?
    Unless I assign a Object type, I cannot assign business transactions.
    Vineeth Varghese

    Hi Vineeth,
    The required object types are insp. lot w/o plan or char, insp. lot with plan and char, insp. lot with plan w/o char.
    I can suggest you to go through the following link, its beautifully explained step by step with screenshots.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20fbc091-ea3a-2b10-f0a3-877ffbf36436?quicklink=index&overridelayout=true]
    Hope this solves your issue.

  • Standard IDoc Type for Inbound NonPO Vendor Invoices - FB60

    What should be the perfect standard IDoc Type for Inbound NonPO Vendor Invoice posting. Tcode FB60.
    I found IDoc Type FIDCCP02 but the Function Module 'IDOC_INPUT_FIDCC2' for FIDCCP02 is not released.
    In the same way many other standard function modules like - IDOC_INPUT_ACLPAY, IDOC_INPUT_FIDCCH, IDOC_INPUT_ACC_INVOICE_RECEIPT and few more are not released.
    My question : If at all I have to use standard IDoc Type, Message type and Function module (Released) for Inbound NonPO Vendor Invoices, then what should be the solution from SAP ?
    Thanks,
    Veeru.

    Hi,
    IDOC_INPUT_FIDCC2 for FIDCCP02 works for us in ECC6.0
    If you want Automatic tax calculation functionality using FIDCCP02.. then FIDCC2 is not correct message type for you. In that case you should probably go for :
    Msg: INVOIC
    Basic type: INVOIC02
    FM: IDOC_INPUT_INVOIC_FI
    Process code: INVF
    Thanks,
    Kumar

  • Confusion on IDOC types for creation of PO

    Hi,
    Requirement is sending PO from sendin SAP system to receiving system.
    For sending am using-
    Processing code ME10
    On serching forums and tutorials,  i came across IDOC type- ORDERS05 but this idoc type is for both PO and SO.
    PORDCR04 idoc type for creation of PO only.
    Some post says PORDCR04 doesnt create PO header text.On the other hand,For inbound processing of PO idoc ( using ORDERS05 ) processing code is not available.
    I will be thankful if somebody can guide me which of these idoc types is preferable.
    Thanks.
    Edited by: Sanjay_lnt on Jan 8, 2011 3:49 PM

    Hell Sanjay
    Outbound ORDERS (= Purchase Order) and inbound ORDERS (= Sales Orders) are like siblings which reflect the customer / supplier relationship.
    In case of the PORDCR04 IDoc it is somewhat different because does it make sense to have the same purchase order in different system?
    In our case a POS (= point of sales) system is used to create a purchase order (for replenishment) which is then converted (via SAP-PI) into an inbound PORDCR04 IDoc in the ERP system. Out of this purchase order a replenishment delivery (for the shops) is created.
    Regards
      Uwe

  • RSAR2318 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Error RSAR238 : IDoc type for source system T90CLNT090 is not available
    I have already checked trx & dtps, but could not find resolution.
    Kindly help me with this error.
    Thanks and regards,
    MS

    M Sharma wrote:
    But how exactly can I create when T90CLNT is not active? Help please.
    Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

  • RSAR238 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Kindly help me with this error.
    Thanks and regards,
    Dhanapal

    Hi,
    Check the same in SDN..
    Object ZDUMMY could not be activatedMessage no. R7I028
    Re: DSO Activation problem
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
    Thanks
    Reddy

  • How to create a Inbound delivery type for a special  purchase order type

    Hi,
    I try to create a special Inbound delivery type for a special purchase order type (a transfer purchase order).
    In SD module, I can créate a special outbound delivery and precise the sale order type, but I don't manage to do it for a Inbound delivery type.
    Do you know if i can do it without specifiq?
    Regards,
    Roselyne

    Hi Roselyne,
    What you experienced is standard system behavior. Inbound delivery type is uniquely assigned to confirmation control key. You can only specify confirmation control key on item level in PO. The assignment of Delivery type can be seen in the following table:
    T163D
    IBTYP EBTYP LFART  RETDLV
    1        AB                      X
    2        LA        EL           X
    3        GW       EG
    The field T163D-IBTYP is checked in different programms. For example in programm RM06ENAB (TA: ME92F). If you insist to customize the determination of delivery type by PO type, I strongly suggest you discuss with the Application consultants before making the modifications to ensure it won't impact other areas.

  • Standard idoc type for Vendor invoices

    Hi All,
           Can anyone tell me if any <b>standard idoc type for Vendor invoice(Cleared items)</b> exists and if any standard report is there to populate and distribute that idoc?
    I want the fields bukrs,belnr,lifnr,bldat,cpudt,zfbdt,zterm,xblnr,waers,dmbtr and mwsts in that standard IDOC.
           Thanks in advance

    Hi,
    check this IDOC types..
    SINGLEREMUNRQS_CREATE01 "46A
    SINGLEREMUNRQS_CREATE02 "620
    regards
    vijay

  • Corresponding IDOC types for 816 and 824 of  X12 tranasction

    hi
    can anyone tell me corresponding IDOC types for the fallowing X12 tranasction(EDI).
    816 Organizational relationships
    824 Application Advice
       regards
        mallikarjun

    Hi Malikarjun and Ryan
    Please take a look at the following links:
    http://www.sapgenie.com/sapedi/ansi.htm
    http://www.sapgenie.com/sapedi/mapping.htm
    Hope this will help.
    Regards,
    Ferry Lianto

  • Usage decision -  characteristics relavent for usage decision

    Hi friends,
    In usage decision screen, either all characteristics are shown or only characteristics relavent for usage decision is shown.
    How do we make a charactertics as usage decision relavent, so that it is shown in usage decision screen by default.
    Regards
    CSN.

    hi
    either all characteristics are shown or only characteristics relavent for usage decision is shown
    Char relevent to UD are except follwing.
    1.Char is skip -->you apply DMR for Char or at lot level in task list header or at char level.
    2.Required char is not ticked in the Control indicator of cha.that means you have selected Optional char.
    3.You have not selected task list indicator in QM view.
    These are only possibilities that all char will not appear in the UD screen.
    Regards
    Sujit

  • IDoc type for invoices

    Please tell me the idoc type for invoices passing from SAP to Crossworlds.Please reply ASAP.
    Thanks & Regards
    Tharani

    Hi,
    below link might help you.
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    regards,
    venu.

  • Idoc type for personnel area

    Hello Everyone,
    Could someone please let me know Idoc type for sending personnel area details.
    We want to send Idoc whenever a new personnel area is created / changed in SPRO.
    Best Regards,
    Priyanka Gupta.

    Hello Priyanka,
    Use the standard idoc Message Type HRMD_A for master data and then you can included the following code in FILTER_VALUES_SET method of the BADI implementation by T code BD64
    CHECK OTYPE = 'P '.
    *SELECT * FROM PA0001*
    INTO PA0001 WHERE PERNR = OBJID
    AND BEGDA <= SY-DATUM
    AND ENDDA >= SY-DATUM.
    record is valid today, no authorization check*
    EXIT.
    ENDSELECT.
    IF SY-SUBRC = 0.
    FILTER1 = PA0001-BUKRS. ELSE.
    CLEAR FILTER1.
    ENDIF.
    Note: the record you are testing for has your desired company code PGPB.
    regards

  • Idoc Type  for Vehicle Master

    Hi Friends,
    Can any body tell me the Idoc type for
    1. Vehicle Master 2. Transport unit and their respective transaction code to send data.
    Points would be awarded for useful answers.
    With Regards
    Vasu

    Hi,
    Please maintain distribution model (BD64)  and partner profile (WE20), RFC connection (SM59) for message type DEBMAS (customer), DEBMAS (vendor) and MATMAS (material master).
    Once the above configuration done, then you can use the following transactions to send the IDocs.
    1.  BD12 - Send Customer IDocs (Sender -> Receiver) or
         BD13 - Get Customer IDocs (Receiver -> Sender)
    2.  BD14 - Send Vendor IDocs (Sender -> Receiver) or
         BD15 - Get Vendor IDocs (Receiver -> Sender)
    3.  BD10 - Send Material IDocs (Sender -> Receiver) or
         BD11 - Get Material IDocs (Receiver -> Sender)
    Regards,
    Ferry Lianto

  • Idoc type for IQ01

    Hi Guys,
    Can you please share idoc type for IQ01(Creating Material Serial No + class characteristics). Is it exists?

    Hi Pete,
    Can you please share BAPI/IBIP fpr IQ01.
    There is an issue in LSMW for status. In 'status with status no' we have 5 values but in screen I can see by default only 4. But the scroll down or page down is not getting captured in LSMW by recording method. So LSMW by recording is not working perfectly  only for status.
    Please do suggest me best method when I have 10000 records.(this is the reason previously I had opted for idoc)

Maybe you are looking for

  • 0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error

    Hi all, Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine  and the error message is as follows: + E:I

  • What can I do about my battery life?

    Ok so I know that my iphone is really old. I bought it in 2009 and it has been a really good phone until about 6 months ago when the battery life went downhill. My phone will not hold a charge for more than 5 min. I will let it charge for a few hours

  • Installed software update, now open applications are not appearing in Dock. Help??

    I installed the newest software update from Apple last week and ever since then when I open an application, the icon doesn't appear in the Dock. It's becoming a problem because I have multiple programs running, which is slowing down my computer, but

  • Log4j in multiple clusters in the same machine

    Hi, i use log4j and i'm having some problems with my log files. I have two clusters in the same machine. How can i have the logs independent of each other. Now i have one cluster jamming the log of the other cluster. I want this doesn't happen, i wan

  • Perform check after release step of purchasing requisition

    Hi, does anybody have a suggestion where to place best some logic which needs to be performed after a release step is performed successfully. background: we use different types of Purchase requisitions, while each one is assigned to a static release