Include uri in dll

I am running a LabView executable which calls a DLL created in LabWindows/CVI. I get an error message when it tries to call PanelFunc (one of the GUI callback functions) that the dll is missing the .uri. How do I include a .uri when I create the .dll?
Thanks!
Solved!
Go to Solution.

Hi again,
in CVI you must use LoadPanelEx with a valid calling module handle to load an embedded UIR file, not the regular LoadPanel, see e.g. here.

Similar Messages

How to include a Plugin (dll file) in a program

How would I go about utilizing a plugin in my program. By this I mean...lets say that there is an online program for which you have to install the plugin onto your computer in order to use the program. How could I include that plugin into a program that can be used offline, or placed into an online applet, so that other people dont have to download that plugin.
Basically...I want to know how to put a plugin into my program so that no one else has to download it. Instead they just use the program, which includes the plugin.
And just so you all know, the plugin is a *.dll file. Could I just put it in an online folder, and cal to it when it is needed??
Thanks in advance.

I apologize, but I am confused because I am not that good at this. How would I refer to it? I do not know how to write a java function so that it will call a .dll file. Also, Im not quite sure what to do when I do call it. Here is specifically what I am trying to do. The plugin that I am trying to use is a download plugin. It is used because some people use a program to upload/protect their files, and the only way to download the files is to use the plugin or the program. The thing that I am confused about is how I use the plugin in my program so that the website I want to download from sees that I have the plugin and allows me to download the files I want by using the plugin which I have stored online. Im sure that the website that I am downloading from checks to see if I have the plugin installed, so how do I make it look at the one that I have online and not search for it on my computer??? PLEASE HELP ME!!! i know that people do things like this all the time, but I am new and need a lot of help.

Including a dependent dll in an executable

I am creating an executable on my windows development system (LV2011) and want to run it on one of my windows target systems, which has the appropriate runtime engine (2011) installed.
In general I usually don't have problems running executables on this target, but in this case the executable on the target system generates an error because of a missing dll (NiFpgaLv.dll).
I can see no way to make the build script include this dll (which is listed as a dependency on my development computer and works fine running on it.
This executable on the windows target is designed to interface with a desktop RT system containing a PCIe-7852, hence the NiFpgaLv.dll dependency.
Once I get past this problem, I am sure I will run into problems loading up the FPGA bitfile from the target computer.
I think my question is: Is there a procedure for deploying an executable to a windows target machine that will control a desktop RT machine containing an FPGA board (PCIe-7852).
Rick Foster
MIT Kavli Institute for Astrophysics and Space Research
Solved!
Go to Solution.

Someone at NI needs to train their service people not to post links that point to ae.natinst.com, since that's an internal NI server not available externally and this happens frequently. You can usually get the same KB article by copying the document number from the end of the URL and then appending it to http://digital.ni.com/public.nsf/allkb/. In this case, the article you want is http://digital.ni.com/public.nsf/allkb/17EA4DD6AAECD50A862570A7004B6146

Include file for .dlls

I have bought a power supply with an RS232 computer interface. The
software consists in a .dll and a .lib files (32-bit, written in C or
C++). I don't know how to write the include file to link my LabWindows/CVI
project to the libraries...
In the .dll I've functions defined like: int configcom (int Comport)
I hope you can help me!
Caterina Ducati

That is very strange. A header file should always be provided with a DLL in order to program with it. Sometimes an import library (.lib) is not provided and CVI can generate on of those for you from the header file, but it can't generate a header file from a DLL or LIB. You really should contact the company that provided you the power supply and get a header file from them.
You can find out the function names in the DLL, but I know of no way to rebuild the header since you will not have the argument lists.
Best Regards,
Chris Matthews
National Instruments

I have uninstalled and reinstalled the new iTunes but it still will not work. I keep getting the error mesage relating to MSVCR80.dll, the installation error 7 (windows error 126). I have tried moving and removing the dll files including the QTMovie dll

I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
I have tried moving the dll filesincluding the QTMovie dll file to now avail. Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast. Can anyone please help???

Dear avid iTunes users - I have cracked it!!!
The response from Apple/iTunes was extremely poor and did not solve the problem.
I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
So ... I simply deleted the Apple folder found in C:\program files\common files\.
I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
I reinstalled the current version of iTunes (for the 16th time!)
Hey presto!!!
IT WORKED :-O Woooohooo!!!
So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
Nuff said.

Autocomplete not including URI?

Hey
I'm trying out firefox and I've noticed that the awesome bar's autocomplete doesn't seem to be filling in anything passed the URL (i.e. the URI).
So for example if I had a site running on localhost:8080 and it had a uri /newsite if I tried to visit this site again by typing in localhost it only shows http://localhost/ and not http://localhost:8080/newsite.
Chrome does this fine so I'm wondering if something is misconfigured?

Hello
Please check this
https://support.mozilla.org/en-US/kb/awesome-bar-find-your-bookmarks-history-and-tabs
thanks

Stand-Alone Application including ocx, dll and Word template folder

Hi,
I try to create an Stand-Alone Application with labview 2011. My problem is how i can include ocx and dll file in my executable to be run by others computers (the other computer don't have the dll and the ocx using in the application). My program use Word template who is in a folder. How i can integrated this Template folder in my executable folder.
This is the first time I create an executable, so please help me -_-.
Nki
Solved!
Go to Solution.

Hi nki,
To include the ocx and dll files you will need to build an executable for your VI and then create an installer for the additional files. I have linked 2 documents that will explain each of these steps. If you have any questions with this let me know.
http://zone.ni.com/reference/en-XX/help/371361E-01/lvhowto/exe_ex/
http://digital.ni.com/public.nsf/allkb/E09BA0E2F31D304F86256A640070058E?OpenDocument
Patrick H | National Instruments | Software Engineer

Adding c# project dll to gac without visual studio(gacutil)

Orchestration project calls a method of c# library project. I tried to include the c# project dll in the itemgroup, but the btdf is failing saying the dll is missing. So I have created a setup project with the primary output taking the c# project,
so it created a msi and I ran that first then followed by btdf. the deployment then worked without errors. This however, resulted in an issue. The component dll is not added to gac, so orchestration is not calling the c# method as part of the orchestration.
I do not see the dll in the gac(c:/windows/assembly). I do not have visual studio installed so could not use the gacutil. Is there anyway I can add to the gac. running the msi should add but not seen in the c:/windows/assembly.
Is there anyway I can add to gac?

Orchestration project calls a method of c# library project. I tried to include the c# project dll in the itemgroup, but the btdf is failing saying the dll is missing.
Can you paste here your Itemgroup?
You need to add it like below:
<ItemGroup>
<Components Include="yourC#projectname.dll">
<LocationPath>..\yourC#projectname\bin\$(Configuration)</LocationPath>
</Components>
</ItemGroup>
I am copying my answer from my
previous thread. Did you try that?
old thread

Unable to load DLL 'OraOps10.dll with a twist

Hi,
So, I have been struggling with an issue for the last couple of weeks that is sending my mad. I receive the following error when attempting to make a connection to a database with my web app:
Error message:
"Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: (0x8007007E)"
I am using
Windows 2008 32bit
Oracle Client 11g
.net v2
IIS7
My apps called CMA, slimier to a more well known app NCSuite
My connection to the database seems to working doing a simple test with a .udl file.
I have attempted the following:
Full re-installing the Oracle drivers following online instruction to clear reg and assembly, several times
Setting permissions on the folder to beyond what they should be
Setting permissions on any folder that refers to oracle
Tried installing ODP.NET just on the off chance it might help
Had a good mess to see if it was something to do with the 64bit issue, but obviously not as Im 32bit
Unfortunately earlier version of the Oracle client are not compatible
One thing that confuses me is why my app would refer to OraOps10.dll rather than the OraOps11w.dll thats being used. Only Oracle 11g has ever been installed on this machine as its a fresh build. The application itself does not directly refer to the OraOps10.dll.
Any thoughts?
Regards

Hi,
I'm a bit confused by your statement "+Tried installing ODP.NET just on the off chance it might help+". You can only get that error if you're using ODP.NET in the first place. A UDL file would test an oledb connection, so it's good just to make sure the client libraries are there and tnsnames configured correctly, but otherwise a bit irrelevant to this error.
Anyway, that error occurs when ODP either cant find it's dependencies.. either the right OraOps or client dlls, or finds them but finds the wrong ones. OraOps11 (without the 'w') gets loaded when your application loads the 1.x ODP.NET provider. The provider for .net 2.x and higher loads oraops11w.dll.
The usual cause of this error is from apps including Oracle.DataAccess.dll in the app bin directory, rather than letting it get picked up from the GAC.
I'd start by
1) searching your machine for all Oracle.DataAccess.dll, and rename any outside the Oracle home and/or GAC.
2) if that doesnt do it, use a tool like Process Explorer (http://sysinternals.com) to find out where Oracle.DataAccess.dll is being loaded from, and what version. You need to have a matching OraOps that is the same version as Oracle.DataAccess.dll they actually need to be a matched pair (check the date of the dlls), but its the mismatched version that causes the error.
3) if neither of the above help, use Process Monitor to watch the dll's loaded 'live' to see if there is some sort of permissions issue, but the well known permissions issue that you've probably found information about was specific to 9.2 and 10.2 client, and is not an issue with 11g. That is to say, the OUI sets permissions properly in 11g, but it's still possible an IIS admin may have cranked permissions down too tight.
Additionally,
1) What version of ODP was your app compiled with?
2) What version of .NET framework?
3) What version of 11g client do you have installed, and what did you install it from? ie, 11107.0 full client? or 11107.20 odac bundle?
4) The ODP forum is located here: ODP.NET
Hope it helps,
Greg

System.DllNotFoundException: Unable to load DLL 'OraOps10.dll'

Hello,
I'm developing a piece of software for a small business that connects to an Oracle 10g express database I set up. The software is written in c# with VS2008, and has ODP.NET installed. On the computer I'm developing with, the software works perfectly. Unfortunately, when I try to use it on a different computer I get the error message "System.DllNotFoundException: Unable to load DLL 'OraOps10.dll'".
I have already created a redistributable for all the .NET components I need, including Oracle.DataAccess.dll
I think this problem would be solved by installing VS2008 and ODP.NET on every computer needing it, but that's unrealistic. Is there another way to get this program to work?

Hi,
At a minimum, you need to install the Oracle core client and ODP provider on the target deployment machine. ORAOPS10.dll is a the unmanaged layer for our provider and gets installed when you install the driver from our installation bundles. That DLL is a dependency of the .NET 1.x assembly and should get installed when you install the ODP component.
I am assuming you are using an older 10.2.0.10 version. In later versions we provide an IC bundle that includes an xcopy redistributable that makes it alot easier to wrap up with your custom install scripts, with earlier versions that reply on a full client you need to use the OUI and install the client and ODP on the target machines where the app will be deployed.
HTH
Jenny B.

Crystal Report 11, List of Runtime DLLs, Runtime.hlp File

I am using Crystal Report 11 with my Delphi 7 application.
I need the list of runtime dlls which I will need to distribute with my application.
The Help file which comes with the Delphi 7 VCL Component (UCRPE32.hlp) says :
QUOTE
check RUNTIME.HLP in the Program Files\Seagate Software\Crystal Reports\Developer Files\Help folder
and make sure you have all the files.
UNQUOTE
I could not find the RUNTIME.HLP file in any folder/subfolders on the machine where Crystal Report 11 has been installed.
Can somebody tell me where I can find RUNTIME.HLP file or the list of runtime DLLs which is required to be distributed
along with my application(which is written in Delphi 7).
Thanks in advance

Hello Ramesh,
Business Objects does not support manual deployment of their runtime files. This started with the release of CR XI (v11.0). Please see [Business Objects Note 1218571|https://bcp.wdf.sap.corp/sap/sapnotes/display/0001218571] - How to distribute the Report Designer Component (RDC) in Crystal Reports XI for more information.
You may also want to review the RDC deployment article - [Creating an RDC Distribution Package|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/901c0761-cf1d-2b10-dea4-8e83937a9337] - that can be found on the SAP web site as well.
The RDC merge modules do not include the CRPE32.dll. Since you're using the VCL you'll probably have to add that file manually to your deployment package.
The merge module links in these articles have probably changed. Go to the [Business Objects Support Software Download|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm] page to find the RDC merge modules.
Change the Selection Criteria to this:
Software Product: Crystal Reports
Product Version: XI, XI Release 1, or XI Release 2 (depending on your version of Crystal Reports)
Software Type: Utility
You should also be aware of the fact that the VCL is not being updated any longer. I think the XI (v11.0) version is the last one that will be available. Additionally, the Report Designer Component (RDC) has been retired with the release of CR 2008. Going forward you'll have to migrate to .NET SDK or the Crystal Report Java SDK.
I hope this helps,
Sincerely,
Dan Kelleher

What files do I need to download iPhone photos to a thin client (HP)? Apple Mobile Support gives 4 dll files to enable the iPhone to be detected and charged but the thin client doesn't see the camera or hard drive.

The iTunes Installation files include 4 driver dlls that I can install on a Windows thin client to enable the iPhone to be charged.
The iPhone hard drive or photos are not detected. I guess I need scanner driver support to cope with the camera.
Can anyone tell me which files from the iTune installation set are needed.
It is not practical (or even possible?) to install the whole iTunes package.
I've seen this question asked by a lot of people but never seen an answer.
Please, can someone help...

Thanks for the reply.
A thin client is used to connect to a Terminal Server, or in my customer's case, a Citrix Server. I need the thin client to see the iPhone as a camera and pass it to the Citrix Client so the photos can THEN be either stored on a network storage device, or e-mailed.
Because the thin client doesn't even SEE a camera (i.e. the iPhone) it won't be able to connect to iCloud to do anything useful.
I think the question I should be asking, is how do I give the thin client Camera Support.
I've just seen a 2008 forum comment that said the iPhone DOESN'T handle photos through iTunes, but the PC (Scanner support) or MAC (iPhoto) handles them directly. I should be putting the question to HP.
This is still a good place for THIS question, because I've seen so many iPhone users asking it...
If I get a satisfactory answer I'll post it back here.

I would like to convert a matlab file into a .dll and use it in LabVIEW. However, when I run the .dll in LabVIEW I get an error stating "... Procedure not found". What could this be? Can anyone help me...

I wish to convert my Matlab files into .dll's so that I can use them in LabVIEW. I am using 'mcc' and 'mbuild' of Matlab to convert my .m files into .c and .dll.
When I try to run the .dll's in LabVIEW, I get an error message in a modal window stating some required .dll or procedure is not found.
How should I resolve this issue. Should I add any other Matlab .dll's in course of making my .dll?
Please help in solving this issue... Thankyou very much.

KJV wrote in message news:<[email protected]>...
> When I run the matlab generated dll, it is stating 'matllb.dll not
> found'. Is it that I should set the path for matlab\bin to include
> all the dll's before I compile? When I make dll from C, it works fine
> in LabVIEW. The problem is from .m to .dll. The problem also arises
> when I convert my .m to .exe. The same error of 'matllb.dll not
> found' comes over. Should I change my matlab compiler options or
> something else? Please help me?
I have the same question,I don't know how to use the matlab DLL file in labview,
I hope someone can descripe the procedure in detail.

Encountered SQL Developer Error 'Can't Start because MSVCR71.dll is missing

Hello,
Thanks for looking at this entry
I have an older version of SQL developer and it suddenly won't run with the following error
'Can't Start because MSVCR71.dll is missing from your computer. Try reinstalling the program.........'
And it is indeed missing. So, rather than download what might be a virus from the internet (new version of MSVCR71.dll ), I tried to do a new install of SQL developer from:
http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html
I put it on my D drive, unzipped and tried to launch.
It asked where I had java.exe (full path name). I found it at C:\Windows\System32\java.exe
Now I encounter: Cannot find J2SE SDK installed at path C:\Windows\System32\java.exe
Please help
Regards
Bill

Hi,
The 32-bit and 64-bit Java 7 JDKs include only msvcr100.dll, 32-bit Java 6 includes only msvcr71.dll, and 64-bit Java 6 has neither!
Also, keep in mind that Java 7 is not certified yet for ANY* version of SQL Developer. The standard recommendation is to install the latest update in the Java 6 JDK code line (currently 1.6.0_45) and use that. Make sure to get the 32-bit version!
Regards,
Gary
Edited by: Gary Graham on Apr 24, 2013 1:15 PM
Corrected which Java downloads actually contain the msvcr71 and msvcr100 DLL versions. Sorry for messing it up the first time!

HT1688 How do you add to the birthday calendar when info is not included in Contact info, i.e. child's birthday?

I'm trying add birthday info that I maintained on my former cell phone which had an option for addition of independent birthdays. From what I've read in the IPhone 4 Manual, this type of info is only added when part of a Contact's info (Address Book Info). So what about independent birthdays, like a child or children of a Contact? I don't want to add each child as a separate Contact as this would be a waste of space. Other than creating an event in the main calendar, is there a method to add these birthdays with the birthday icon & preferred Alert notifications?

I've run into this problem before when using a VI that's in the Advanced Analysis library. Building the DLL resulted in "lvanlys.dll" being copied into the "data" directory of the place where I created the DLL. When distributing the LabVIEW DLL I had created to the target platform I had to also distribute the "lvanlys" DLL. In my case there was no license issue since there was a license for the target machine but it only had the run-time engine installed. I don't know why the "lvanlys" DLL wasn't in the run-time engine install. All I know was that I had to include the "lvanlys" DLL to tag along when I distributed my LabVIEW DLL. I suspect a similar situation is occurring with you and you need to provide these "auxiliary" DLLs if they're not in the run-time install directory of the target machine. You will need to check about any licensing issues though!

Include uri in dll

Similar Messages

Maybe you are looking for