Include file for .dlls
I have bought a power supply with an RS232 computer interface. The
software consists in a .dll and a .lib files (32-bit, written in C or
C++). I don't know how to write the include file to link my LabWindows/CVI
project to the libraries...
In the .dll I've functions defined like: int configcom (int Comport)
I hope you can help me!
Caterina Ducati
That is very strange. A header file should always be provided with a DLL in order to program with it. Sometimes an import library (.lib) is not provided and CVI can generate on of those for you from the header file, but it can't generate a header file from a DLL or LIB. You really should contact the company that provided you the power supply and get a header file from them.
You can find out the function names in the DLL, but I know of no way to rebuild the header since you will not have the argument lists.
Best Regards,
Chris Matthews
National Instruments
Similar Messages
-
Including files for time machine
i have a complete time machine backup on an external hard drive. I have a second external drive with limited space available and I want to make a backup on there of ONLY certain critical files. I know you can EXCLUDE what is backed up in time machine options, but there is only a few folders I want to backup. It would be much easier to INCLUDE ONLY THOSE FILES rather than EXCLUDE EVERYTHING BUT THOSE FILES.
Any ideas?
Thanks.No, that's going to be a royal pain (you'll need to exclude some hidden folders, too), and you'll have to change the exclusion list each time you switch destinations.
Much better to use a different app. See Time Machine - Frequently Asked Question #27 for some suggestions. I suspect CarbonCopyCloner will be better for this purpose than SuperDuper, as it seems easier to select/omit what you do and don't want to back up. -
Regarding the nomenclature for include files in SAP
Hi Group,
I am presently enhancing a tool for the upgrade thing .The tool is used to derive all the effected objects,so, for that i need to know the nomenclature for include files in SAP.e,g all the include files for table maintenance generator starts with LSVIM.so, we don't need to analyse that include files,so in the similar fashion i need to know nomenclature for include files....
Thanks,
Ajitabh AggarwalHi Group,
Basically i am working on developing an upgrade tool from 4.6/4.7 to Ecc 5.0/6.0,so for that i need certain information on include files.Basically i need to collect the affected zobjects whic i need to modify,So,for that i need to get the FUGR,FMs and includes which need to be corrected.e.g all deque and enque function modules are irrerelevant and similary includes starting with LSVIM and those that don't have function odules attached to them are for screen maintenance of tables.So, i need certain on inputs on that end.if u have anything,please do tell me.
Thanks in Advance.
Ajitabh Aggarwal -
ITSMOBILEDEVICEINCLUDE file for Psion Teklogix u2013 Workabout Pro
Where can I find a device specific include file for Psion Teklogix u2013 Workabout Pro RF device.
I tried using DEVINCLUDE_NAURTECHCK61 javascript but it does not seem to be working for some function keys especially F7. It is trying to expand the screens in the RF device when I use F7.
Is there any config I need to do in the RF device itself.Hello Vasudha,
You'll have to read the documentation for your device and browser to come up with your own device include file. The keycodes are probably different, which is why F7 is probably a magnify instead.
Edgar -
What dll do I use and where are the .h include files?
I recently downloaded the wavetek 271 drivers and have found that when imported (Lab View 6.0) that they need to be linked to a dll. But which one? And the includes call for the glib.h and other libraries where are they at. Are they compressed?
thanksHello-
There are two versions of this driver one for LabVIEW (NI's graphical language) and one for LabWindows-CVI (NI's text-based language). Be sure to download the proper type of driver.
In LabVIEW, the driver should be placed in LabVIEW\instr.lib.
In LabWindows-CVI, it's necessary to Load the driver from the Instrument>>Load... menu. The files should be placed in cvi\instr.
Randy Solomonson
Applications Engineer
National Instruments -
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
Click here and follow the instructions.
(98897) -
How to convert java class to dll file for using in Microsoft Technology(.n)
hey hemmj !!!!!!
nice replying , first of all i d like to say thanks for response me so frequently..... i like such type of guy... i d never forget ur online support.
hey buddy, i ve a problem with applet application...
i m working on java chat server build on swing applet. As it is chat server, it is divided into two parts, one is server application and other is client application. I want to run this server app on the client server and the basic thing with this site is that it is running on .net platform(Microsoft). and the other app ll running on the client machine or end user. Now the problem is that this site would run only if the server app ll be run on server. This server app ll open the socket of server, which ll listen the request of the user...... So, the requirement is to convert this java sever class file into dll file and register this dll file with the IIS server.So, It run and stop with the IIS server.
I ve already search the way to convert the java class file into dll file. This is possible in such way........... below code is for the java class file...
import java.net.*;
import java.io.*;
import java.util.*;
public class chatServer
public static void main(String args[]) throws Exception
ServerSocket sersoc=new ServerSocket(1234);// Any port number above 1000 should do
// as most ports below 1000 are used by system
Vector socvec=new Vector();
String data="";int i,j=0;
BufferedReader in;
//System.out.println("Listening of port " + sersoc.getLocalPort());
//System.out.println("Waiting for connections...");
while(true)
Socket soc=sersoc.accept();
socvec.addElement(soc);
chatServerReadThread csrt=new chatServerReadThread(socvec, soc);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
PrintStream out=new PrintStream(soc.getOutputStream());
out.println("Connected to chat server");
out.flush();
data= in.readLine();
for(i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
out=new PrintStream(soc.getOutputStream());
out.println(data + " connected");
out.flush();
//System.out.println(data + " connected");
csrt.start(); // error is comming from here..... plz help me.
class chatServerReadThread extends Thread
Vector socvec;
PrintStream out;
chatServerReadThread(Vector socvec, Socket soc)
this.socvec=socvec;
try
out=new PrintStream(soc.getOutputStream());
}catch(Exception e){}
public void run()
try
String data;
Socket soc;
BufferedReader in;
while(true)
for(int i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
if(in.ready())
try
data=in.readLine();
if(data.charAt(0) == ']')
data = in.readLine() + " exited";
//System.out.println(data);
socvec.removeElement(soc);
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
else
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
}catch(Exception e){socvec.removeElement(soc);}
}catch(Exception e){e.printStackTrace();}
first i ve made the jar file of this class
jar cvf chatServer.jar chatServer.classafter getting the jar chatServer.jar. I ve opened the .net dos prompt and
type this command which ll make dll file automatically....
> jbimp /t:library chatServer.jar
And you'll see the following output:
Microsoft (R) Java-language bytecode to MSIL converter version 1.1.4322.0
for Microsoft (R) .NET Framework version 1.1.4322
Copyright (C) Microsoft Corp 2000-2002. All rights reserved.
Created chatServer.dll
I cant get the problem origin from where it is comming, when i tried to convert it into .dll file it shown an error that, it did not recongnized the method in first class
public static void chatServerReadThread.start() method
is not recognized by .net dos prompt commnad. But when i omit this method it gets created the .dll file. This start method is basically the default method of thread class that run the thread from the same class..
By vewing the code u can visulize the thing,, i ve marked the code from where the error is comming.
Plz do it as soon as possible, i ll waiting for ur reply......
I ll be really thanking u for that....
Thanx and regards
Niraj Kumar SinghI wonder if this will work:
jbimp /t:exe chatServer.jar
Your chatServer is an application that can be started from the commandline.
A dll is a library to be used in com, com+, other executables or .... -
How to create a dll file for lab view?
Hello
I want to create a DLL file for LabView. Can anyone help me in this issue?
Regards
VivekPlease explain.
Do you want to create a dll in another language (which one?) for use in LabVIEW or do you want to create a dll out of your LabVIEW code?
LabVIEW Champion . Do more with less code and in less time . -
I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed up. I did a full reset of Time Machine. I disconnected the external drive and reconnected it. It is not a matter of file types, no files and no folders have gotten backed up. Everything looks normal though unless one goes hunting for recent files on the back up.
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Development environment for 'include' files?
My photo album program only has a single page. Each time you
ask for a new page
it calls itself, with a new set of parameters. Some of the
more complicated
pages are generated by setting up a framework (which
specifies the styles to be
used, among other things) and then loading an include file
into it.
Initially I envisaged these as being simple text files, but
inevitably some of
them became quite complex. Developing these in Dreamweaver is
quite a pain,
because it doesn't know about the CSS styles. I did try
making an HTML shell
file and pasting the include file into it, then cutting and
pasting it again to
save the revised version, but this proved to be cumbersome
and very error-prone.
Is there any way of telling Dreamweaver to load an
environment before loading
the include file?
Clancy> This seems to be about 90% of what I was thinking of,
but I gather that
> when you
> upload the file the hidden stylesheet remains attached
to the file, but is
> effectively commented out.
No. It's only "applied" during Design-time viewing.
> It is a pity that Dreamweaver doesn't include a
'compile' option which
> stripped
> out template and other Dreamweaver specific commands
(end_editable and the
> like)
> from the development file, leaving clean HTML. If this
were done it
> would mean
> that they could use Dreamweaver specific operations much
more flexibly,
> without
> having to worry about using botched up comment commands
to hide them from
> the
> browser.
I guess I don't understand what you are referring to here
with "botched up
comment commands". A comment is a comment, and really does
nothing to the
page at all.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Clancy" <[email protected]> wrote in message
news:[email protected]...
> "Murray *ACE*" <[email protected]>
wrote:
>
>>Use Design-time stylesheets.
>
> Thanks Murray,
>
> This seems to be about 90% of what I was thinking of,
but I gather that
> when you
> upload the file the hidden stylesheet remains attached
to the file, but is
> effectively commented out. However I guess that all that
has to be in the
> file
> is an 'include' statement (or perhaps this is what
actually happens), so
> it
> shouldn't lengthen the file noticeably.
>
> It is a pity that Dreamweaver doesn't include a
'compile' option which
> stripped
> out template and other Dreamweaver specific commands
(end_editable and the
> like)
> from the development file, leaving clean HTML. If this
were done it
> would mean
> that they could use Dreamweaver specific operations much
more flexibly,
> without
> having to worry about using botched up comment commands
to hide them from
> the
> browser.
>
> Clancy -
LabView 2010 Applicatio​n Builder for EXE Always Included files are not Included
In LabVIEW 2010 F2, When I am using the Application Builder to build an EXE file, I have listed 10 or so files to Be "Always Included". But when I Explore the directory where the EXE was built, those "Always Included" files are not there or in any subdirectory under the EXE file.
This frequently makes my EXE file not work properly because important files are missing. I have to spend extra debugging time to find out the the cause of my problem is missing files that the Application Builder should have transferred "Always".
Why did the Application Builder, when building an EXE target, not include the files that should be "Always Included"?
Why does the Application Builder ignore these files specifications?Dennis Knutson wrote:
The build does include files you select. Post an example project with a small VI and some separate files where this does not happen.
No, it does not appear that all of the files that I listed in the "Always Include" list are copied during the Build process to the Build directory or any subdirectory under that.
The Build Source Files.jpg file shows most of the list of the files that should be "Always Included". Notice the .VI and .ctl files that are listed
The Build Directory.jpg file shows the file in the Build directory that were built.
The Data Directory.jpg file shows the data directory under the Build directory and may include some of the files listed in the "Always Include", but not all of them.
The other subdirectories under the Build directory were created by me and do not include any files that were copied during the Build process.
So not ALL of the files that were included in the "Always Include" list were copied into the Build directory area as expected. ALL of the files that are listed as "Always Include" should be copied, if they exist. Those files existed when then were selected for the List and they existed at the time of the Build.
I can not include an example project that demonstrates this. I am prevented from doing so by the terms of an NDA. You are going to have to take my word that this event is real and happens the same way every time. This information should be sufficient for someone to investigate why do not ALL of the files listed in the "Always Include" list are copied into the Build directory area regardless of the file type or contents.
Attachments:
Build Source Files.jpg 151 KB
Build Directory.jpg 125 KB
Data Directory.jpg 131 KB -
Proc*C/C++ suport for include files without .h extensions
We have written code C++ code which is Standard C++ ver 5.0 compilant. In this version of C++ compiler the files are without .h extensions. For example <iostream.h> is now to be reffered as <iostream>. We are facing problems in compiling this code with PCC compiler
Sample Code:
File test1.h
#ifndef TEST1H
#define TEST1H
#include<iostream>
#include<list>
class test
private:
int i;
public:
int k;
#endif
File test1.pc
#include <iostream>
#include<test1.h>
int main()
int i;
std::cout << "Enter a value :";
std::cin >> i;
std::cout << std::endl;
return 0;
When this code is compiled with Code=cpp CPP_SUFFIX=cpp PARSE=PARTIAL options we get the following errors
Pro*C/C++: Release 8.1.5.0.0 - Production on Fri Feb 1 12:46:00 2002
(c) Copyright 1999 Oracle Corporation. All rights reserved.
System default option values taken from: /oracle8/app/oracle/product/8.1.5/precomp/admin/pcscfg.cfg
Error at line 2, column 10 in file test1.pc
#include <iostream>
.........1
PCC-S-02015, unable to open include file
Error at line 3, column 9 in file test1.h
#include<iostream>
........1
PCC-S-02015, unable to open include file
Error at line 4, column 9 in file test1.h
#include<list>
........1
PCC-S-02015, unable to open include file
I guess so PCC compiler does not identify include files without .h extension.
LataDo you have the SUNWhea package on your system? This package contains the headers you seem to be missing. It's on the Solaris 8 CDROM 2 of 2. If you don't know how to add packages from the CDROM, look up "Adding and Removing Software After Installing Solaris 8" in the "Solaris 8 Advanced Installation Guide" on docs.sun.com.
-
I am getting Adobe Reader XI (11.0.07) Error 2753. The File 'acrosup64.dll' is not marked for installation when deploying from msi package. .
Need help to resolve the issueHi dingusmagii
Can you please share the following info:
-> Which OS and architecture are you on
-> What are the exact steps being followed for installation.
-> Do you have any previous version of Reader already installed on your machine.
Also it would be helpful if you can you share Windows Installer log. Please follow the steps below to create installer log
1. Launch Notepad
2. Copy paste the following text in notepad
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer\]
"Logging"="voicewarmupx"
3. Now press Ctrl+S to save the file.
4. In the "Filename" field type <any_file_name>.reg for e.g. abc.reg
4. In the "Save as type" dropdown, select "All Files"
5. Click Save button to save the file at desired location
6. Go to the location where you saved the file and double click on it.
7. Follow the prompts to create the registry key.
After the registry key is added successfully, please re run the 11.0.07 patch installer. Once you get the error message click ok and then click on finish to close the installer dialog.
Now go to C:\Users\{username}\AppData\Local\Temp and look for file with name similar to MSIxxxxx.log.
Please upload the dump (compress the dump using WinZip or likewise) and share the link here.
For help see link How to share a document
regards,
Rohit -
Missing LIBRFC32.DLL file for 64bit - x64 Windows Server
Dear Folks,
I have installed SAP ECC6 with BI7 system on Windows Server 2003 on x64. But I am not able to get data from SAP BW from Crystal Report 2008. I also did MDX PARSER connection test through t.code SM59. I got list of error messages.
Logon Cancel
Error Details timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host ns2 / sapgw00
Error Details DETAIL: no connect of TP mdxsvr from host ns2 after 20 sec
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 798
Error Details MODULE: gwr3cpic.c
Error Details LINE: 5873
Error Details RETURN CODE: 242
Error Details VERSION: 2
I have been read other forums, most probably I am missing LIBRFC32.DLL file for x64 Windows Server. I couldnu2019t find any where this specific file for Windows Server x64 64bit version. It is available on Sap Market place, since I donu2019t have super user rights, I canu2019t download it.
If any one of you already have this file. Please share with me.
thanks
ObaidHello Ingo
Thanks to read my problem and for your reply, I have already read that SAP Note 1032461, I have the same problem as clearly defined in the note, and suggesting to put LIBRFC32.DLL file in <windows-dir>/system32 folder.
My SAP ECC and BI7 (Kernl 7.00) is installed on 64-bit, x64 Windows Server 2003 Enterprise. I need to download that file from RFC library available on SAP Market place. But, I don't have any super user rights.
If someone has similar setup and has already that file or could download for me. I need to get that file. I appreciated your kindly help.
thanks
Obaid -
Please . I want a working ( amtlib.dll ) file for adobe dreamweaver cc 2014
Nancy O. wrote:
This question was asked 7 months ago and nobody responded until now. A corrupt or missing DLL file can usually be fixed by reinstalling the software that's throwing an error.
Nancy O.
Only if you have legitimate software
Maybe you are looking for
-
hi i have a html page ie written purely using html tags. and im now trying to use the JSF components instead of html tags. is there any way to do this. i have to open the html file in JDev 11.and change the html tags to JSF. How to do this????
-
Track Info Retrieval options...??
Hi, all. So, when I insert a CD into my iTunes, it retrieves the tracks info. However, sometimes, it gives me two options. I selected one, but the organization of that one was a mess (Classical Music suffers a GREAT deal when retrieving this kind of
-
How to compose a document on Win 8.1
How do I originate a document in Win 8.1 ? Is there an App included in this PC for this purpose ? I have a Notebook PC g7-1150 us.
-
How to fix the error code 1009?
How to fix the error code 1009?
-
Itunes loading 1 cd as two seperate albums?
any1 have the problem of loading a cd on itunes and it coming up as 2 or 3 seperate albums as a result of having multiple featured artists. what can i do to prevent this or combine them all on 1 cd the way it should be. I tried going to track info an