Inclusind a new field in internal table
Dear All,
I am a newbie to abap world.
I wish to clarify if there is some way like
data: itab like mseg
In addition to the mseg table structure i want to add a new field to same.
I tried something like
data: itab like mseg,
field like transparenttable-field.
but it doesnot work.I want i should be able to refer itab-field without any compilation error.
Hi Aditya Sharm
Please try this code just copy and execute it it will work.
Sont forget to reward points.
REPORT ZBC12.
Tables mseg.
data begin of itab occurs 0.
include structure mara. " -> In addition to the mseg table structure adding new field of other structuredata MBLNR like mseg-mblnr.
data MJAHR like mseg-mjahr.
data ZEILE like mseg-zeile.
data end of itab.
Populating itab*
itab-MBLNR = 1011.
itab-MJAHR = '2008'.
itab-ZEILE = 4.
itab-matnr = 4444. " -> Populating the field using itab-manr as control knows itab as its table
append itab.
Displayig itab data on screen
loop at itab.
write:/ itab-MBLNR,itab-MJAHR,itab-ZEILE,itab-matnr.
endloop.
Similar Messages
-
New fields to MM01 Table Control
Hi All,
My requirement is to add the LAENG (Length), BREIT(Width) and HOEHE(Height) fields to the table control in AFS Weights and Volumes TabStrip of MM01 Transaction and we need to update these values in /AFS/MARM table. This is an AFS System.
I have copied the Function Group J3AB to ZJ3AB and modified the sub screen 2501. I am to see my custom sub screen. But when I change the data in the table control the data is not getting saved in the /AFS/MARM table.
There is an internal table XJ_3AMARM which holds the table control data. This table is declared as the global field in the function group. It is getting populated in the PAI of my custom screen. But when the control goes to SAP standard function group the data is getting refreshed and data is not getting updated.
Please suggest me in updating the data.
Thanks & Regards,
Prasad.Hi,
Add a field in the internal table structure of editor program.
and select the data into it.
Go to screen painter and go to layout, add your new field by selecting dictionary field or internal table field. If you select the dictionary field , then you have to assign it to a value in the PBO module.
PBO.
module assign.
in se38
module assign output.
dictionary-field = internal table field.
endmodule.
regards,
kamala. -
How to add the contents of a field of internal table.
Hello Everybody,
How to sum up the individual field from a internal table. Like i have a internal table that has menge field , I need to sum up the menge field for each matnr..
exm : for each matnr there are 5 menge entries, I need to add all the menge fields and shud be put against the matnr .
Thanks,Hi Khaleel,
One more option is using the "collect" statement.....
imagine in the internal table itab..we have 2 fields only..
MATNR,MENGE,
we have 2 internal tables itab1 and itab2...
loop at itab1.
collect itab1 to itab2.
endloop.
Action performed is ...for the same MATNR...menge gets added and saved as a single record...When matnr changes...new record is Appended
another case is we have 3 fields in internal table
MATNR,UNIT,MENGE
imagine we hane the records
Material1 KG 100
Material1 LT 20
Material1 LT 200
MAterial2 KG 100
in this case...the output will be
Material1 KG 100
Material1 LT 220
MAterial2 KG 100
Reason is that the fields before the addable value is checked for similarity..
here field UNIT is also checked and also MATNR before adding up....
Hope it gave you some alternative idea to proceed with....
Reward if helpful
Regards
Byju -
Adding a new field to the table
Hello friends,
I have a custom table and is in use from a long time now.
Now i need to add a new field to that table.
1 - can i go directly to the change mode and then add it or is their any other way that needs to be followed.
2 - once added do i need to go to SE14 and do something thr for the changes done to the table.
This table also has a table Maintenence generator. Do I need to do something thr.
Thanks,
Bob.Hi,
Check whether the change in ur custom table is going to impact any Custom program or not.
If its so then adjust ur ABAP code so as to fit with the new table.
Decide whether this field is going to be aprt of primary key or simple field.
Is there any data present in ur custom table already?
Regards,
Lakshman. -
Add a new field to existing Table
Hi , We want to add a new field to existing table from ECC and populate historical data .
We have already extracted data from ECC to VBAK Table . We have to add a new field - Incoterms in HANA . This field exists in ECC .
Please guide.Hi Vicky,
I dont think you can add new fields to the condition table once you have activated the condition table.
SAP says you can only make limited changes to the condition table, like changing the description, fast entry screen, header and footer fields, but not able to add new fields to the table, and I think that is the correct approch or else for the same table you will have two sets of condition records.
Please refer to the below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
What you can do is create a new condition table with additional field and assign this table before the currently used table in the access sequence.
Hope this helps.
Regards
Raj -
How to add new fields to a table control in a standard transaction JHA3X
Hi All,
We have a requirement where we have to add two new fields to a table control
in a standard transaction JHA3X .
We don't want any changes into our standard code and also we don't have any USER EXIT for that
screen.
Please provide with some solutions for the same .
Thanks in advance .You will need add this to the /var/clientlibs/libs/cq/security/widgets.js and add the field under the 'CQ.security.UserProperties'. For example, if you wanted to add a field to show the 'Middle Name' under the 'First Name' field, you can try adding the following:
"items":[{
"xtype":"textfield",
"fieldLabel":CQ.I18n.getMessage("Login"),
"anchor":"100%",
"disabled":true,
"allowBlank":false,
"name":"rep:userId"
"xtype":"textfield",
"fieldLabel":CQ.I18n.getMessage("First Name"),
"anchor":"100%",
"name":"givenName"
"xtype":"textfield",
"fieldLabel":CQ.I18n.getMessage("Middle Name"),
"anchor":"100%",
"name":"middleName",
"xtype":"textfield",
"fieldLabel":CQ.I18n.getMessage("Last Name"),
"anchor":"100%",
"name":"familyName",
"allowBlank":false
Hope this helps.
-Ron -
How to handle field symbols internal table values?
HI all,
I declared field string as below.The below code is working fine.
Data : ITAB TYPE STANDARD TABLE OF YAPOPLN, (Custom table).
wa_itab like line of ITAB.
field-symbol : <fs> type ITAB.
ASSIGN PARAM TO <FS>
LOOP AT <FS> INTO WA_ITAB.
WRITE:/ 'ABC'.
ENDLOOP.
But my requirement is that I dont want all the fields of the table YAPOPLN.My output contains only 2 fields of the table YAPOPLN,which contains total 4 fields.According to my requirement only 2 fields will be getting into one parameter PARAM(this is function module parameter,which is from ALV classes) from the user entered output,which contains only 2 fields.So the above code is not working properly because wa_itab contains 4 fields and giving short dump.
If I am declaring the internal table with the required fields(only 2 fields) and referring that internal table to field symbol <FS>
Data : BEGIN OF ITAB1 OCCURS 0,
FIELD1 LIKE YAPOPLN-FIELD1,
FIELD2 LIKE YAPOPLN-FIELD2,
END OF ITAB1.
field-symbol : <fs> LIKE ITAB1 OR <FS> TYPE ANY.
DATA :WA_ITAB1 LIKE LINE OF ITAB1.
ASSIGN PARAM TO <FS>
LOOP AT <FS> INTO WA_ITAB.
WRITE:/ 'ABC'.
ENDLOOP.
But when I am compiling this code i am getting the below error.I am gettting the same below error when even <FS> is also declared as <FS> TYPE ANY.
.'FS' is not an internal table or defined in TABLES.
Can anyone help me in this regard?
Thanks,
BalajiHello,
Try this way:
If both the type of internal tables are same then you can directly assign dynamic internal table to static internal table.
itab = <itab>.
Suppose you have field symbol internal table <itab> which is different in structure from ITAB.
Now, you can create <wa> as follow:
FIELD-SYMBOLS <wa>.
DATA wa TYPE REF TO DATA.
CREATE DATA wa TYPE LINE OF <itab>.
ASSIGN wa->* to <wa>.
This way your work area is read.
Using [ASSIGN COMPONENT|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/eb3923358411d1829f0000e829fbfe/content.htm] syntax you can read required component of <wa>.
Finally you can use that value to load static internal table.
You can also refer to my thread on [Dynamic table|Re: Creating Dynamic table].
Hope this helps!
Thanks,
Augustin.
Edited by: Augustarian on Aug 20, 2009 10:06 AM -
How to move field symbol internal table to internal table with header line?
Dear all,
hi...hereby i would like to ask how i can move field symbol internal table to a internal table?
as i know field symbol internal table is without header line..
so, may i know how to do this....to move field symbol internal table to internal table which consist of header line and field and record will same as field symbol internal table...in additional, my field symbol internal table is dynamic table mean everytime will have flexible columns..?
Please advise...
Thanks
Regard,
ToToRo.
Edited by: @ToToRo@ on Aug 20, 2009 6:16 AMHello,
Try this way:
If both the type of internal tables are same then you can directly assign dynamic internal table to static internal table.
itab = <itab>.
Suppose you have field symbol internal table <itab> which is different in structure from ITAB.
Now, you can create <wa> as follow:
FIELD-SYMBOLS <wa>.
DATA wa TYPE REF TO DATA.
CREATE DATA wa TYPE LINE OF <itab>.
ASSIGN wa->* to <wa>.
This way your work area is read.
Using [ASSIGN COMPONENT|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/eb3923358411d1829f0000e829fbfe/content.htm] syntax you can read required component of <wa>.
Finally you can use that value to load static internal table.
You can also refer to my thread on [Dynamic table|Re: Creating Dynamic table].
Hope this helps!
Thanks,
Augustin.
Edited by: Augustarian on Aug 20, 2009 10:06 AM -
How To select maximum Value in a specifieid field in internal table.
How To select maximum Value in a specifieid field in internal table?
Step : 1
Sort itab by <Field1> descending.
Just sort the internal table by the field.
STEP: 2
Then read the table at index 1.
Read table itab index 1.
ITAB-FIELD = MAX . " Max field will come in the first row of the internal table.
Regards,
Gurpreet -
Adding new field in customized table ZPM_QMEL_EXT
Hi all,
My requirement is to add a new field in ZPM_QMEL_EXT table numeric field no of months due (ZZ_CO_MON_DUE) .
Its value will be calculated as the # of invoices that were paid vs. what has not been paid and then from there, value of this field will be fetched.It has to be populated during the time of notifcation screen entry (iw51). The logic will be similar to this
SELECT FAEDN FROM DFKKOP INTO TABLE IT_DU_DT
WHERE GPART EQ WA_QMEL-KUNUM AND
VKONT EQ WA_QMEL-ZZ_VKONT.
SORT IT_DU_DT BY FAEDN ASCENDING.
READ TABLE IT_DU_DT INTO WA_DU_DT INDEX 1.
MOVE WA_DU_DT-FAEDN TO DUE_DT.
CALL FUNCTION 'HR_MONTHS_BETWEEN_TWO_DATES'
EXPORTING
I_DATUM_BIS = SY-DATUM
I_DATUM_VON = DUE_DT
IMPORTING
E_MONATE = NO_MT.
IF NO_MT IN P_DU_MT.
WA_QMEL-DUE_MONTHS = NO_MT.
Awaiting your kind help .
Thanks
hariom.Hi,
There is only one option to include extra field for standard tables that is Append Structure other than we don't have any option.
For Customizing tables we can use Append structure as well as Include Structure.
Rules: Append Structure should be in last in Field column but include structure you can insert in any where it means between the fields.
Delivery class option and data class will take care automatically while upgrading the sap system one version to Another version.(upgrading).
For that you should maintain the those properties when data base table creation.
i hope the above information may helpful to you.
Best Regards
Sreenivas Pachva -
How to implement PCCD001 exit for new field in AENR table
Dear experts,
I am implementing PCCD0001 exit for a new field in AENR table secnario below.
Tcode CC31/CC32/CC33 required additional field which stores value in AENR table. in AENR in implemented include(CI_AENR) and added new field. After i implemnted PCCD0001 screen exit for CC31/CC32/CC33.
in that two function exit are there, one for passing data to screen EXIT_SAPMC29C_001
another for getting data from screen EXIT_SAPMC29C_002.
which table or structure i use to place field in screen exit to pass data to EXIT_SAPMC29C_002, in this function i don't have import parameter.
Adv. thanks,
VenkeyHi sekhar,
Your Requirement can be implemented by OVS(Object Value selector) This is the custom search help .So that you can define on what basis the value has to be fetched.
Look at the below link
http://wiki.sdn.sap.com/wiki/display/WDABAP/ABAPWDObjectValueSelector(OVS)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
You need to use the component WDR_OVS.
It has 3 phases
In phase 1
You will fetch the value from input field to F4 help dialog box.
In phase 2
You will generate the search results , in this phase look for the input value given in field 2 and accordingly generate search result for the field 3.
In phase 3
The selected value will be returned to the original screen.
Regards
Karthiheyan M -
Adding a new field in QM02 table control
Hi Gurus,
I have the requirement to add a new field in a table control in QM02.I have added the field in the view VIQMMA but I dont know how it can be added in screen.
Is it possible through some SPRO customization?
Regards,
RajatHi Rajat,
Welcome to SCN. I am not sure add to table control . Please have a look to add custom fields
1. QQMA0001-incorporate additional data in notification header
2.QQMA0008-additional data on the details screen fro notification item
3.QQMA0010 QM/PM/SM: User Subscreen for Additional Data on Cause
4.QQMA0011 QM/PM/SM: User Subscreen for Additional Data on Task
5.QQMA0012 QM/PM/SM: User Subscreen for Additional Data on Activit
If you need a custom tab then this is the procedure
1) SPRO,Quality management,Notification,Overview of notification types, Select the notification and 90 give the customer specific screen area
2) function group XQQM ,create the screen under screens tab number 0090.
Check this if need this and check and post.
Regards,
Madhu. -
Assign function code to a field in internal table
Hi all,
Can we assign a function code to one field in internal table so that we can use it as an user command in list display.
For ex:
data : begin of itab occurs 0,
check(1) type C,
num type I,
end of itab.
I am preparing a list display using WRITE statements.
I'ld like to update the checked value of check box as soon as the user selects a check box. So I would like to assign a function code to this check box. Then I can use AT user-command.Hi,
dinesh's apporach is not bad, but
1. the structure' name cannot be part of the component
2. you need to make sure the component-name always is in upper case.
Try adapting the following code:
data: begin of wa_test,
field01 type string,
field02 type string,
field03 type string,
end of wa_test.
data: l_fieldname type string,
l_counter type string.
field-symbols: <testc> type string.
do 3 times.
l_counter = sy-index.
concatenate 'field0' l_counter into l_fieldname.
translate l_fieldname to upper case.
assign component l_fieldname of structure wa_test to <testc>.
if <testc> is assigned.
<testc> = 'any value'.
endif.
enddo.
write / wa_test-field01.
best regards -
Read contents of changing fields from internal table
Hi Folks,
Please help me in my query below:
Consider there is a Z-table with two fields TABNAM and FIELD having values KNA1 and NAME1 respectively.
In my report I have fetched entries for customers from KNA1. Now based on the field from Z-table I want to populate a variable suppose V_FREE_VAR with the value from KNA1 table.
Here V_FREE_VAR is of CHAR200 so that it accomodate all types of values from KNA1.
The value of Z-table FIELD can change daily i.e next day the value may be PSTLZ.
So how can I read the particular field from internal table as the field to be read is dynamic.
Note: using case is not feasible.
Thanks in advance.
Regards,
Shardul@Hartmut P
As Rob said i want to get the value of the field from internal table. the code is something like this.
I_KNA1 contains records for customers.
Suppose values of Z-table are in internal table I_TEMP_TABLE.
Entries in I_TEMP_TABLE are as follows
TABNAME FIELDNAME
KNA1 NAME1
The value of FIELNAME in Z-table can be changed
Loop at I_TEMP_TABLE into WA_TEMP_TABLE.
Read I_KNA1 into WA_KNA1 with key KUNNR = '0001002234'.
IF SY-SUBRC EQ 0.
CASE WA_TEMP_TABLE-FIELDNAME.
WHEN 'NAME1'.
V_VAR = WA_KNA1-NAME1.
WHEN 'PSTLZ'
V_VAR = WA_KNA1-PSTLZ.
ENDIF.
But using case is not appropriate as KNA1 contains 176 fields. -
How to delete duplicates of some specific fields in internal table
i am having internal table of it_ekko.
in that i am having some data of PO no, Line Item,IR value and IR qty......
i am having data like below.
PO Line Item IR Value IR QTY
200310051 0010 1500 4500
200310051 0010 1500 4500
200310052 0010 0 0
200310052 0010 0 0
now where ever IR value and IR qty is present i wanted that to display only once against that PO and line item
i wanted like below
PO Line Item IR Value IR QTY
200310051 0010 1500 4500
200310051 0010 0 0
200310052 0010 0 0
200310052 0010 0 0
Field names for IR value and IR Qty are Menge2 and dmbtr2.
How to do that.........
I cant use
Delete adjacent duplicates of it_ekko by ebeln = wa_ekko-ebeln and
ebelp = wa_ekko-ebelp.
because i wanted that po and same line items , how many times it is like that only.....
in it_ekko table i only wanted to delete duplicates of menge2 and dmbtr2.
Pls suggest the codesort itab by po item ascending.
loop at itab into wa.
at new wa-item.
if wa-qty1 ne 0 and wa-qty2 ne 0.
move wa to wa_final.
append wa_final to i_final.
endat.
endloop.
or
loop at itab into wa.
at new wa-item.
if wa-qty1 ne 0 and wa-qty2 ne 0.
write wa.
endat.
endloop.
make sure that the qty1 and qty2 is not character type , then in control statement it will replaced by *.
Maybe you are looking for
-
Hi, I am trying to fetch report using bing API and making a SOAP call for fetching the data. I get the following error: [Warning] fopen(): SSL: Connection reset by peer [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [li
-
An album downloaded twice on my iTunes and I'm charged twice for the album. I want a refund for one of the charges. How do I do this?
-
Develop an interactive report which displays the list of purchase requtions
please give the related table and source code
-
Stretching the region dynamically in a facet of panel splitter.
Hi, Jdev version- 11.1.1.6.0 We are using a panel splitter in a jspx page and inside on of the facet of the panel splitter we are using a taskflow with page fragments as a region.The use case is as user can stretch the panel splitter,we want to stret
-
CDMC - Activate Statistics Collection
Hi, I have a question related to CDMC Statistics Collection.It is not clear for me, after activate the collection what are the periods to evaluate and period type? Please can you clarify? Best Regards, Zsuzsanna