"Incompatible video codec found in presets" message while attempting to export

Cant seem to be able to export at any settings. I keep getting this "Incompatible video codec found in presets" message, and then eventually Premiere wigs out and crashes. I tried uninstalling, rebooting and re-installing, but I'm still getting the same message.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Similar Messages

  • Incompatible video codec found in the preset

    Hello, First post so apologies if I am in the wrong section.
    I am trying to export a sequence from premier pro through the media encoder.
    for my project I am required to produce a 720p, 25fps h.264 .mov  however when selecting the format "Quicktime"  there is no drop down in the codec options to allow for H.264 compression.
    Under format I have attempted selecting a preset that matches the above settings but I receive the error message
    "incompatible video codec found in the preset"
    I am using a new laptop (around 2 weeks old) on the windows 7 os
    Thanks for your help!

    Do you have QuickTime Player installed on your machine?  If not, please install it from Apple - QuickTime - Download and watch videos, movies, and shows.

  • Unable to export Quicktime after upgrade from Premiere 7.0 to 8.0 (2014) error "incompatible video codec in preset"

    In the previous version of Premiere Pro (downloaded two months ago) I was able to export QuickTime files with preset HD 720p H.264.  It was very easy to do this in the previous version.
    Upgraded to Premiere Pro 8.0 (2014), no when I attempt to export the same project with the same settings I see error message "incompatible video codec found in the preset. present load failed" 
    When I select Quicktime, the default preset appears as NTSC DV Widescreen 24p.   Attempted to export with this setting, result is a file that plays audio but no video.  
    System is Windows, tried two different computers, including one with Windows 8, same result. Tried Media Encoder, same result. 
    I searched the forums for an answer, the new features page lists these presets as available however they are not working for me.  Nothing else was changed on the computer, only the upgrade to Premiere 8.0 (2014)
    How can I export Quicktime files in the new Premiere Pro?  

    Tech support helped me solve the issue - uninstall QuickTime and reinstall the newer version of QuickTime

  • Mod_hlshttp [500]: Invalid timestamp found in the message while processing /hls-live/streams/rd-mp4

    Hi,
    We use  FMS 4.5.1 for streaming MP4 (H264/AAC) live streams to flash clients and iPads. Occassionally iPad viewers get error messages indicating that the video cannot be played. On these occasions we see error messages like this in our Apache logs:
    mod_hlshttp [500]: Invalid timestamp found in the message while processing /hls-live/streams/rd-mp4/events/noordoostpolder_1/liveevent/livestreamNum4390.ts
    Strangely enough this error message cannot be found anywhere in Adobe's documentation or anywhere else on the net (or perhaps I haven't searched well enough...)
    Has anyone else here encountered this problem and/or does anyone have an idea as to what causes these messages and this problem?
    Message was edited by: GRO-NIC: Does anyone have any idea? And/or can someone from Adobe respond? We are still receiving complaints from several of our customers about this.

    Hi,
    We use  FMS 4.5.1 for streaming MP4 (H264/AAC) live streams to flash clients and iPads. Occassionally iPad viewers get error messages indicating that the video cannot be played. On these occasions we see error messages like this in our Apache logs:
    mod_hlshttp [500]: Invalid timestamp found in the message while processing /hls-live/streams/rd-mp4/events/noordoostpolder_1/liveevent/livestreamNum4390.ts
    Strangely enough this error message cannot be found anywhere in Adobe's documentation or anywhere else on the net (or perhaps I haven't searched well enough...)
    Has anyone else here encountered this problem and/or does anyone have an idea as to what causes these messages and this problem?
    Message was edited by: GRO-NIC: Does anyone have any idea? And/or can someone from Adobe respond? We are still receiving complaints from several of our customers about this.

  • I am getting error message while attempting to upgrade the software to iOS 6.1.3

    Hi,
    Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3

    The Current iOS for the iPhone 4s is iOS 7
    How to update your iPhone, iPad, or iPod touch

  • I am receiving an unexpected error message while attempting extract updates for Lightroom 5

    I am receiving an unexpected error message while attempting extract updates for Lightroom 5

    I am using Windows 7, however, since posting the original message I have solved the problem by deleting my old Lightroom 4 download file from my download folder.  Thank you for your response.
    Sent from my iPad

  • An error occurred while attempting to export the virtual machine (0x80070050)

    I was exporting several VM's from a Vhost so that i could import them into a new cluster. Four out of the five machines went off with no hitch and were exported and then imported.  However one of the machines throws up an error durring the export
    "An error occurred while attempting to export the virtual machine.
    Filed to copy file during export.
    Failed to copy file from 'D:\path\of\vhd\VM.vhd to 'D:\path\of\export\VM.vhd': The file esists (0x80070050)"

    I have found an answer to my own question after
    further investigation  … In hopes of helping anyone who may have a similar problem in the future.... 
    What happened was the server has two VHD’s one is located in C:\vm\vhd\server.vhd the second was located in a different directory such as C:\vm\vhd1\server.vhd 
    as both vhd files were named identically when the export was attempted it tried to move both files into the same directory I assume giving the “file already exists error”.

  • Why do I receive an error message while attempting upload pictures from iPhoto '09 to Facebook?

    I currently have iPhoto '09 version 8.1.2. I tried uploading pictures from iPhoto to Facebook but I get the message "An error has occured. Please try again later". File > Export > Login (which brings me to the Login page on Facebook) > I sign in & that's when I get the message. I've even tried hitting the Facebook tab on the bottom right. Does anyone have any solutions to my problem? I'll greatly appreciate it. Thanks.

    Did you ever get a response?

  • Keep getting (Not Responding) message while attempting to view messages in Thunderbird

    After launching Thunderbird and loading new email I continue to receive "(Not Responding)" message in the top application bar. I tried the re-indexing steps after saving the profile folder to a backup drive, but the message continues to come up when attempting to navigate between email messages. I also tried running in "Safe Mode" per instructions, but it continues to occur there as well. Are there settings that I need to adjust to improve performance of this application on my system? I am running Windows 7 on a Dell Inspiron desktop computer. Thanks

    McAfee...
    •User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; BRI/2; McAfee; yie8; rv:11.0) like Gecko

  • "Cannot Restore Files" error message while attempting to restore entire HD

    I have searched this forum and can't find any help on this particular problem. I tried to uses a program (FileVault) to protect some very large directories. It really scrambled all my files so I decided to "simply" do a full restore from my Time Machine. Normally it is connected wirelessly to my iMac, but I physically moved the Time Capsule down to next to the iMac and connected them via Ethernet cable. I wanted a clean HD so I also did a reinstall of Leopard from the installation disc asking it to NOT archive but wipe the disk clean (I forget exactly what the technical phrase for this is)
    I then booted the computer off the Leopard Installation DVD and then went to "restore system" and selected the Time Machine.
    It had NO problem finding the Time Machine. It gave me all the previous backup points in time---I selected one about 24 hours before I ran into problem.
    It started restoring with no problem other than it was predicting about 80 hours to do the whole restore (have 900Gb on the HD so this didn't seem too unusual).
    After about 2% of the restoration was indicated on the progress bar, suddenly the restore stopped and I got an error message that it could "Not restore files" and to "Restart the computer and try again"
    OUCH! At least it didn't wait til 99% of the restoration was done and THEN crash!
    Would anyone have any ideas?
    One thought I had--I had updated the operating system whenever an update came out but since I did a re-install before going to the restore option my iMac is now running 10.5, whereas Time Machine has a 10.5.3 (or whatever) version on it. Should I update the OS on the iMac first?
    THANKS!
    Jim

    This has solved loads of people who have this issue and have used an alternate DNS setting.  Below are instructions for both iPhone OTA and on you Mac
    If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
    Change DNS Servers
    Settings -> Wi-Fi
    Click the blue arrow on your connected network
    Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
    Try again
    If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
    If you are getting the error message "Unable to check for update" when you try through iTunes
    On your Mac
    Choose Apple menu > System Preferences, and then click Network.
    Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
    Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
    You can use OpenDNS
    208.67.222.222
    208.67.220.220
    or
    You can Google Public DNS if you want
    8.8.8.8
    8.8.4.4
    I have actually repointed my routers DNS so all my devices now point to OpenDNS servers

  • Fatal Error Message While attempting to Install :/

    Hi,
    I just purchased a new laptop and was hoping to wipe out Windows and install Arch.  When I attempted to repartition my disk using the custom option - I got the following message:
    Fatal Error:  Bad primary partition 2: Partition ends in the final partial cylind.
    I'm not sure what the second part of the message is trying to tell me.
    If it helps this was the output from fdisk -l
    Device        Boot       Start   End         Blocks          Id   System
    /dev/sda/                       1    1036       8313856       27  unknown
    /dev/sda2       *       1036     1048         102400        7   HPFS/NTFS
    /dev/sda3                1048   30402   235780280         7   HPFS/NTFS
    Any help would be greatly appreciated - what it means and what I might be able to do to fix it and move on
    I have heard a lot of good things about Arch and I'm bound and determined to find a way to get Arch installed.

    ppss,
    I burned an image from another distribution and then used their installation program to create new partitions for Linux.  I'm sure you could use gparted and other programs as well.  I would goggle "Linux & partitioning" or Linux & partitioning tools" I'm sure you will find multiple ways to solve the issue.  I'm not sure what the message was about but I was able to install a Linux distro (not Arch sadly, but that is due to another unrelated problem, I'm trying to work through) on my laptop without issues - so it wasn't a hardware issue.
    fbr

  • Falied to register error message while attempting to install flash

    I keep getting the same error message when I try to install flash. I've installed flash on this computer many times before. I've troubleshooted the problem to no avail. Does anyone have any ideas of how I might have a successful install. I am the administrator on my computer so I don't know what the problem is.
    Thank you

    Hi,
    Can you please try the solutions listed in the following page: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html?
    Hope that your issue is sorted fast with the above solution.
    With regards,
    Prabhu

  • Error message when attempting to export a PDF to Excel format

    i just signed up and my first PDF i try to export to EXCEL gives me an error message  -  "An error occurred while trying to access this service"    any thoughts here??

    Hi Paul,
    It sounds as though you may be trying to sign in to the service via Adobe Reader. Is that the case? We've had recent reports of this error occurring in Reader.
    What happens when you log in directly to https://cloud.acrobat.com/exportpdf using a web browser?
    Best,
    Sara

  • Error message when attempting to export master file?

    I am running Mavericks and have FCP 10.1
    When I try to export a master file, I keep receiving the error message "The share operation master file has failed.  An error occurred when creating frame ..... (error -1)."
    I've turned off background rendering, I've tried copy and pasting entire timeline into a new project, and I've tried deleting project and event rendering files.
    At this point, I don't know what else to do.
    Help?

    Russ H wrote:
    Returning to when you turned off BG Renderiing and deleted project and event renders, did you delete all renders? And before you tried exporting, did you leave BG Rendering off and did you try exporting without manually rendering?
    Russ
    I did delete all renders. I did not manually render anything. BG Rendering off, I clicked export master file and that was all.

  • Why am I getting a "Disk Full" error message when attempting to export?

    I am trying to export my movie at large quality or higher and every time it gives me a "disk full" error. However, I was able to successfully export it at medium quality. I don't understand why I would be getting that error though because both my internal hard drive and external drive, which I am exporting from (but onto the internal), have ample amount of space to accommodate for a large or HD quality video. Any help would be much appreciated!

    How much space do you have?

Maybe you are looking for