Mod_hlshttp [500]: Invalid timestamp found in the message while processing /hls-live/streams/rd-mp4

Hi,
We use FMS 4.5.1 for streaming MP4 (H264/AAC) live streams to flash clients and iPads. Occassionally iPad viewers get error messages indicating that the video cannot be played. On these occasions we see error messages like this in our Apache logs:
mod_hlshttp [500]: Invalid timestamp found in the message while processing /hls-live/streams/rd-mp4/events/noordoostpolder_1/liveevent/livestreamNum4390.ts
Strangely enough this error message cannot be found anywhere in Adobe's documentation or anywhere else on the net (or perhaps I haven't searched well enough...)
Has anyone else here encountered this problem and/or does anyone have an idea as to what causes these messages and this problem?
Message was edited by: GRO-NIC: Does anyone have any idea? And/or can someone from Adobe respond? We are still receiving complaints from several of our customers about this.

Similar Messages

I press the record while i do live stream. where does the video saved at in my computer?

i press the record while i do live stream. where does the video saved at??

iMovie (Apple), Pinnacle Studio is another. But there a number in the app store. and that is just if you are limited to the iPad.

Is it possible to adjust FPS,video size and quality per the bitrate while playing a live stream?

So far , I only found tutorials on control these attributes while publishing the stream,
how can I adjust it while playing ?

That article judges the band width and assigns a proper video(say these videos are prepared before hand) to play.
But I can't get multiple live video streams with different settings out of a single pc camera.
And I can't require each user to install multiple cameras to use the service.

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

Java.lang.AssertionError: WSDL not found in the class file "processes

Hi,
I am using WLI 10.3 workshop to build process application. I have designed one JPD which inturn call another process JPD. So i have used worklist process control to create the process and tried to access the process. When i am executing the code, i am getting below error message.
13-Jun-2011 14:13:00 o'clock BST> <Error> <WLI> <BEA-000000> <Exception processing processes.ISPSSQMsgLisnt
Java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
Truncated. see log file for complete stacktrace
Java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
--ClassAnnotations:
--Method Annotations:
--Field Annotations:
can't continue
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
Truncated. see log file for complete stacktrace
xception processing processes.ISPSSQMsgLisnt
ava.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.<init>(DispUnit.java:153)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:628)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:1029)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:950)
at com.bea.wli.broker.JWSSubscriber.getDispClass(JWSSubscriber.java:231)
at com.bea.wli.broker.JWSSubscriber.getRequest(JWSSubscriber.java:184)
at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:358)
at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:348)
at com.bea.wli.broker.SubscriptionDispatcher.doDispatch(SubscriptionDispatcher.java:87)
at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.run(MessageBroker.java:179)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.security.authentication.AuthenticationService.runAs(AuthenticationService.java:108)
at com.bea.wli.broker.MsgBrokerSecurityHelper.doDispatch(MsgBrokerSecurityHelper.java:231)
at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.doDispatch(MessageBroker.java:165)
at com.bea.wli.broker.MessageBroker.publishMessage(MessageBroker.java:984)
at com.bea.wli.mbconnector.jms.JmsConnMDB.publishMBMessage(JmsConnMDB.java:343)
at com.bea.wli.mbconnector.jms.JmsConnMDB.onMessage(JmsConnMDB.java:475)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
aused by: java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
--ClassAnnotations:
--Method Annotations:
--Field Annotations:
can't continue
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispFile.<init>(JwsDispFile.java:24)
at com.bea.wli.bpm.runtime.JpdDispFile.<init>(JpdDispFile.java:108)
... 34 more

Hi
Are you using wli process control?
That uses wsdl and could cause the issue.
I also saw couple of internal bugs CR264315 and CR288904 on the same issue on 9.2.
Since this is a wli issue could you post in the wli newsgroup to get more answers http://forums.bea.com/forum.jspa?forumID=2047 ?
Also you can open a BEA support case at http://support.bea.com and an wli support engineer would help you. Please refer to the Cr numbers above in your support case.
Thanks
Vimala

'No Administrator found for the task' while releasing the task in AR31

Dear Gurus,
i am facing the issue 'No Administrator found for the task' while releasing the task in AR31 while doing Mass Asset change.
Please help to provide the solution.
Many thanks.
Kumar

Dear Kumar,
error 5W141 indicates that the configuration for workflow is not in place fully.
1. SWU3 => Automatic customizing
You find the customizing of the workflow under Basis -> Business
Management -> SAP Business Workflow. There you can check the minimum
customizing for workflow:
2, Please check in transaction OAWF if the responsible users are
    assigned to the workflow tasks
    Menu path: Basic Functions
                 Assign tasks to agent
                    Correct worklist
                    Release worklist
                    Correct and release worklist
3, In addition check if the users are assigned to the workflow-tasks      in the basis-component (transaction
     PFTC).
   Menu path: Task type: TS   - Standard task
       Task     : corresponding task (e.g.8010 - correct worklist
The relevant logic is: if the system finds that the agent or user is defined, it will go straight to T-code SO01. And the user can edit the work list there.
Following is a reference notes :
            322526 Analysis for workflow problems
Regards Bernhard

Help - Multiple errors occurred on the server while processing commands

I am trying to start ical server on a fresh install of os x server 10.5, but I receive the following error messages: "Multiple errors occurred on the server while processing commands. Use the console application to view the error message" then I hit "ok" and then if i try to enable the iCal service, up pops up another window saying: "an error occurred onthe server while processing a command. Error 'CANNOTLOAD_BUNDLEERR' occurred while processing a command of type 'writeSettings' in plug-in 'servermgr_calendar'
what's going on? how do i proceed to enable the iCal service? here is my error log:
servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:22:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:50 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a398170>
May 25 13:23:50 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:23:51 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a390c30>
May 25 13:23:51 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:58 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3cabf0>
May 25 13:23:58 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'setState' in plug-in: 'servermgr_calendar'
May 25 13:24:04 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396e50>
May 25 13:24:04 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:05 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396370>
May 25 13:24:05 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:24:10 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a38ad80>
May 25 13:24:10 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d6980>
May 25 13:24:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39a0d0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39b2a0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:41:33 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d55b0>
May 25 13:41:33 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:41:34 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3c1ba0>
May 25 13:41:34 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:36 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3835c0>
May 25 13:41:36 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes

no idea how to set up a dns. can you point me in the right direction? thanks

Definition of timestamp field in the message tracking log

Hi,
anyone can help me with the exact definition of timestamp field that I retrieve in the messagetracking log?
I think that is the exact time by which the exchange server receive a mail and start to elaborate it
Can you confirm please
Thank you very much
Luca Pozzoli

Hi ,
Please have a look in to the below mentioned points .
Anyone can help me with the exact definition of timestamp field that I retrieve in the messagetracking
log?
Time stamp in exchange will help us identity at when and what time the message has been received and processed
from source server to destination server.
With the help of time stamps we can able to identify the message delay between the hops .
As an additional info you can review the time stamps in message headers as well on the message tracking logs.
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Error message when no atachment found for the workitem while approving ?

Hi Folks,
I need some help in this issue please.
Requirement is, Agent needs to attach a document to work item and then approve. To achieve this, i have put code in for complete execute condition of the step.
This is how it works, when agent attaches doccument and approves, it completes workitem and when there is no attachment, it does not complete work item but it does not stop agent by throwing anykind of error message.
I need a error message when there is no atachment found for the workitem and agent tries to approve it. Please suggest how i can get this done ?
Thanks a lot in advance..
Prasu

Hi
There a couple of different ways to accomplish this.
If your not using standard task/methods your able to extend your method. In here just check if a document is attached, display a message with the message statement, or a FM (e.g. TH_POPUP_TO_INFORM), and then call the workflow statement "<b>Exit_Cancelled</b>", by doing this the workitem will stay in the inbox, in status in process until the document is attached.
If your using standard task / Methods, you need to check if a document is attached in the workflow logic, preferably in a condition. Now - if no document has been attached create a loop, and within this loop create a task, for displaying the message. A easy solution here could be a simple decision task with only one Decision, or if you are able to do some ABAP development, create a small method for displaying the message.
In order to make sure that this task/message will popup immediately, create a container element e.g. "Last_Agent", the do a binding from the decision task to the workflow container ActualAgent -> Last_Agent. Now you Last_Agent as the agent for you "Display Message" Task
Regards
Morten Nielsen

"Incompatible video codec found in presets" message while attempting to export

Cant seem to be able to export at any settings. I keep getting this "Incompatible video codec found in presets" message, and then eventually Premiere wigs out and crashes. I tried uninstalling, rebooting and re-installing, but I'm still getting the same message.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Mail the message while transferring to error queue

Hi,
          I want to mail the message when a message is sent to error queue.
          I have configured error queue in weblogic console.
          Thanks and Regards
          A.SathishKumar

"Stickied" in the top section of this Windows Hotsync board is a thread with instructions to do a clean uninstall of Palm Desktop. Try that, then reinstall the previous version.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

How the message is processed in the BPM?

Hello,
First in XI I developed a scenario JDBC->XI->RFC. It worx now. This time I'd like to use ccBPM for the same process but with time dalay (to be sure, that the process uses the steps from the ccBPM). I've configured following scenario: ->START -> receiver for the message -> transformation -> time delay -> sender -> STOP. Unfortunately, it doesn't work. It still worx in the implicit way - without time delay (so, it worx the same way as it worked, when the ccBPM process didn't exist). How can I assign this process to use the way which has been developed in the ccBPM?
Thanx very much! Peter

Hi Peter,
you have to do steps in directory
import BPM into directory
then use the wizzard twice to create routing:
1. jdbc to BPM
2. BPM to RFC
then it'll work
Regards,
michal

Can we avoid the message while opening downloaded excel file.

Hi,
I have an interesting issue.
In my scenario I am downloading characteristics value from COID.
Through background job we are getting that report in our Out look mail box. Report format is XLS.
While opening the attached XLS file we are getting one message.
The message is as follows
The file is not in a recognizable format
     If you know the file is from another program which is incompatible with Microsoft excel click cancel, then open this file in its original application. If you want to open the file later in Microsoft excel. Save it in a format that is compatible, such as text format.
     If you suspect the file is damaged, click help for more information about solving the problem.
     If you still want to see what text is contained in the file, click OK. Then click finish in the text import wizard
if we ok it the file is opening properly
So My question is Can we avoid this message ?
Edited by: amit kulkarni on Apr 10, 2008 9:01 AM

Hi,
can you check with your ABAPer on this or post this thread to ABAP Developement forum
Regards,
Sankaran

How to find the message that processed a file

Dear guys,
I need to find the message that have processed a text file. Using sxmb_moni I can see this information on DynamicConfiguration log but I don't know how to search this string text in all messages that were processed.
Thanks,
Helio Paixao

Hi Paixao,
As michal you need to have the EhP1 (enhancement package 1 for PI) or if you have installed trex then you can see this blog on how to find:
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
Else some other nonstandard ways through which you can get are shown in this blogs:
/people/sravya.talanki2/blog/2006/02/21/abap-based-trex-in-xi-proto
/people/alessandro.guarneri/blog/2006/02/14/super-message-monitor-for-sap-xi
Regards.
---Satish

How to display a modal message while processing in a thread.

I have difficulty in display a modal dialog while in processing in a background.
I have created the following class.
package fedex.screen.component;
import java.awt.*;
// This infobox is a modal dialog which display static text and stay
// on screen without blocking proceeding code from execution and can
// only close by issuing close method.
public class ProcessInfoBox implements Runnable
     // Display dialog box
     private InfoBox dialog = null;
     // Thread to enable showing of Dialog Box
     private Thread thread = new Thread(this);
     // Determine if to close dialogbox
     private boolean isFinish = false;
     public ProcessInfoBox(Frame frame) {
          dialog = new InfoBox(frame,"Performing Operation","Processing...");
thread.setPriority(Thread.MAX_PRIORITY);
     public void setTitle(String title) {
          dialog.setTitle(title);
     public void setText(String text) {
          dialog.getMessageLbl().setText(text);
     // The reference return will be ProcessInfoBox.InfoBox
     public InfoBox getInfoBox() {
          return dialog;
     // Thread method
     public void run() {
          dialog.setVisible(true);
          // If true return from thread and exit.
          while ( isFinish == false )
               try
                    Thread.sleep(500); // 500 msec
               catch ( InterruptedException e )
     // Start showing dialog
     final public void show() {
          thread.start();
          isFinish = false;
     final public void hide() {
          isFinish = true;
          dialog.setVisible(false);
     // Dialog box which show text.
     public class InfoBox extends Dialog
          private Label messageLbl = new Label("Processing ...");
          public InfoBox(Frame frame, String title, String message) {
               super(frame,title,true);
               initInfoBox();
          public Label getMessageLbl() {
               return messageLbl;
          private void initInfoBox() {
               setLayout(new BorderLayout());
               add(messageLbl,BorderLayout.CENTER);
               setSize(250,150);
FormUtility.centerForm(this);
     public static void main(String[] args) {
          Frame frame = new Frame("BigMac");
          frame.setSize(600,600);
          frame.setVisible(true);
          ProcessInfoBox box = new ProcessInfoBox(frame);
          box.show();
          for ( int i = 1; i < 10000; i++ )
               System.out.println(i);
          box.hide();
To test the code I used the following section to test
The main method in the class is used. In the simple
example, the message did correctly update itself while
i is increment. However, when I try on more complex
application, the message just stalk there without
updating itself as it is hanging.
I have try to set piority to highest but without effect.
Is there anything to rectify the situation
thank

The "please wait" dialog is a modal dialog. When u
show it, the following code can not executed!
That's the problem

Mod_hlshttp [500]: Invalid timestamp found in the message while processing /hls-live/streams/rd-mp4

Similar Messages

Maybe you are looking for